Object directory entry when trying to release TR

Dear experts
I have a problem when trying to release my TR in Development to Testing.It prompts me an error "Not all objects in the request could be locked. Do you want to release them anyway?"
Then I viewed the error and the error says:
"Object XXX requires a directory entry"
Do you have any idea how to go around this problem?
Thanking you in advance
Wan

Hi,
Check the Authorizations and Owner. What is the Message you are getting?.
Check
Re: Transport
Re: When releasing a transp. req.not all object in the request could be locked
Thanks
Reddy
Edited by: Surendra Reddy on Jun 23, 2010 9:10 AM

Similar Messages

Object directory entries

When I am trying to change the package I am getting the following error message.
Object directory entry R3TR DTEL ZZADJ_PER locked
for request/task DEVK900251
How to change the object directory entries which are part of a request/task?
Please help.
Thanks,

As I told you before as long as you dont unlock those objects you can not change the package. Please unlock and then try to change the object directory entry. Create a new transport of copies and release the old transport. The released transport will not go anywhere. Dont forget to check the options on the unlock entries (expert tool).

Changing Object Directory Entry of Infocube - urgent

Hello -
I have an infocube that is already assigned to a package (not $TMP).
How can I reassign it to a different package.
When I try to reassign via Cube change, the package field is greyed out.
I have deleted all data, deactivated the cube + aggregates. There a re queries still attached to the cube though. But cannot change the Object Directory Entry.
Help solicited.
thanks.
-abhi

Abhi
In case of BW, there could be more than one package.
One for Backend development (like cube, ODS, update rules, info objects etc) and one or more for Reports.
So in ur case, the cube would always be alloted to the same package! You would only create new requests....
let me know if you have more questions.
prakash
Assigning points on SDN is way of saying thanks!!

Mass Object Directory Entry assignment

Hi gurus.
I got a bundle of InfoObjects with $TMP package assigned to.
Is there any possibility in BI to do mass Object Directory Entry assignment of <my BI package> instead of $TMP to InfoObjects?

hi Gediminas,
Go to tcode: SE80 it is called as Object Navigator, there you can create a package on your own, after creating the package all the objects will go into that package, after you create the package you will get a request number, and you have to give that request number when you do for mass objects entry.
regards,
raghu.

Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist

Hi BW Experts,
I´m facing a Problem while releasing a Transport from Dev to Quality System. The consisty check shows the following objekt as not available:
Object directory entry R3TR EVEN EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 does not exist
A check for the Object: R3TR EVEN showed that it is a Event Collector which seems to be missing. The transport consists a process chain which listens to an event. Is this the mentioned Object or is it related to some different topic? The process chain is correct and activated.
Thanks in advance for your help.
Best regards
Christian

Hi Abdullah,
I followed your advice and did a check if the object was writen to my transport. The object was missing on the transport. But also searching in transport connection did not help.
So I had a look into the table TADIR and also here I could not find the mentioned object which was realy strange to me, as the process chain was active and correct.
I than deleted the event collector(AND) object in the process chain and created a new one. A check in the table TADIR now showed the before invisible EVEN_BEY5RHD67LRF9UT6G9LXEZUK6 and also the new one created. The new EVEN Object(and also the old deleted one) was written to the transport. Importing it into Quality System worked without any problems.
I´m not 100% sure about this behaviour but maybe its linked to the fact that the process chain was a result from the Dataflow migration wizzard. Maybe while migrating that dataflow something went wrong.
Anyway, thanks to all of you for your help!
Best regards
Christian

Object directory entry reverse lookup

Hi all,
Is there a quick way to trace an object directory entry (i.e. 46580GGOBLSFRS7P42HKLRFFF) back to an InfoObject or other object? I've got an error in a transport and I'm trying to trace back to see which specific object I have issues with. The transport log only refers to the object by its directory entry.
SU03 and SE80 have not given me this functionality (by trying so far). No luck using the transport organizer "manually" looking for the entry either.
Many thanks for any input!
Regards,
Petter
Message was edited by: M Petter

Hi Petter,
Try to search in DB table RSZELTXREF & RSZELTTXT.
Go to SE11/16 and type in the above table name and enter the element 46890... in the first field and hit execute.
If you cant find the any results in there, search in other lookup tables start with RSZ*.
Hope this helps.
Praveen
Message was edited by: Praveen Vujjini

Object Directory Entry Transport

Gurus
I have a small question.
When I collect a infobject in one request it goes into
Object Directory Entry R3TRIOBJZMATACNT.
Please explain what is this.
Many greetings gurus

George not sure if i understood well your question
but if your question is : is my infoobject collected in a transport request that i can send to qualification system or productive system then it is yes.
All infoobject that are collected in transport request are inserted as R3TR IOBJ --> name of the IO
hope this could help you
if not do not hesitate
regards
Boujema

Mass change in object directory entry

hi Experts ,
we have a problem in object directory entry of some near 1600 objects which want to change in a single go , can any one help us on this??
We have searched SDN already and do find similar questions but no relevant answer , please help.
If we try to change it through Se03 it asks to do it objectby object whch is a very time consuming activity .
Br,
Sunny.

In SE03,
You can give wild character if the object names starts with for example A* and then you can block select.
or if you go by further restriction(for example by package name), you can able to list all of the objects under the package.
This way you can block select it and change the object directory.

Howto find according object via object directory entry?

Hi all,
I need to write a program that checks an ABAP source whether it is a local object ($TMP) or not. I know that I can search for the DEVCLASS in table TADIR. But in order to do so I first need to get the according object from the object directory entry of this ABAP source.
For example, I could check the function module "ZZZ_FUNCTION_MODULE", which is a function of the group "ZZZ_FGROUP". The according object directory entry is therefore "R3TR-FUGR-ZZZ_FGROUP". My qustion is: how can I map from "ZZZ_FUNCTION_MODULE" to "R3TR-FUGR-ZZZ_FGROUP"?
Thanks in advance for your help!
Kind regards; Matthias

The problem is that I do not necessarily know whether it is an function module or not.
For example, it could also be an include that I want to get the according object for...

Object Directory Entry

Hi folks,
I need to distinguish a function group and a function. My problem is that both have the same object directory entry.
I must know if there is another attribute to distinguish them. If yes where to find?
Thanks in advance.

Solved.
   IF wa-object = 'FUGR'.
      SELECT *
      FROM enlfdir
      INTO CORRESPONDING FIELDS OF TABLE t_enlfdir
      WHERE area = wa-obj_name
       AND generated <> 'X'.
      IF sy-subrc EQ 0.
        LOOP AT t_enlfdir INTO wa_enlfdir.
          wa-obj_name = wa_enlfdir-funcname.
          APPEND wa TO h_itab.
          help_counter = help_counter + 1.
        ENDLOOP.
      ENDIF.
    ENDIF.
    CLEAR wa.
    counter = counter + 1.
ENDLOOP.

Error when trying to release NSDate in class

Hello,
Like a lot of folks here I am pretty new to this language, so I am just going to jump into it. Basically I have a very simple class that takes a NSDate object in a custom init method. Below is the code...
#import <Cocoa/Cocoa.h>
@interface DateTesting : NSObject {
NSDate *theDate;
@property (copy, nonatomic) NSDate *theDate;
-(id) initWithDate: (NSDate *) aDate;
-(void) print;
-(void) dealloc;
@end
#import "DateTesting.h"
@implementation DateTesting
@synthesize theDate;
-(id) initWithDate: (NSDate *) aDate
[[self init]];
if (self)
theDate = [[[NSDate alloc] init]];
theDate = aDate;
return self;
-(void) print
NSDateFormatter *dFormatter = [[[NSDateFormatter alloc] init]];
[[dFormatter setDateFormat: @"MM/dd/yyyy"]];
NSLog(@"%@", [[dFormatter stringFromDate: theDate]]);
-(void) dealloc
[[theDate release]]; //this is where the problem comes in if I comment out no error
[[super dealloc]];
@end
and finally the main app...
int main (int argc, const char * argv[]) {
NSAutoreleasePool * pool = [[[NSAutoreleasePool alloc] init]];
NSDateFormatter *tempFormatter = [[[NSDateFormatter alloc] init]];
[[tempFormatter setDateFormat: @"MM/dd/yyyy"]];
DateTesting *myDate = [[[DateTesting alloc] initWithDate: [tempFormatter dateFromString: @"01/15/2001"]]];
[[myDate print]];
[[myDate release]];
[[pool drain]];
return 0;
As you can see this is a very simple app, just takes a date as a string, converts to a date object and prints it out. Everything works ok until I try and release "theDate" object in the class, if I comment it out then it exits w/out any problem. I have a feeling that it is because the date that is being passed into the initWithDate method is not being copied and so when I am trying to release it... I am kind of confused as to what I am doing wrong or how to fix. I have searched and tried to read the documentation but either I am missing it or way off. If someone could help shed some light on my issue I would be grateful.
Thanks
Patrick

Here's your problem ...
theDate = [[NSDate alloc] init];
theDate = aDate;
You created theDate, then you immediately threw it away and re-assigned it to aDate. So theDate and aDate point to the same place. The problem is, aDate is autoreleased already (it came from NSDateFormatter and is auto-released). When you later released it it was double released.
I highly recommend you avoid anything to do with properties for now (in fact you never used it) until you get this stuff down. You should have a look at the basics ..
http://developer.apple.com/documentation/Cocoa/Conceptual/MemoryMgmt/MemoryMgmt. html
Hope this helps.
Eric

Error when trying to release the billing document to FI accounting

Hello,
when we are trying to release the document to accounting, we get the error :
"The tax amount must not be greater than the tax base"
Could you, please, let me know what should be checked, as customer is saying all data is correct
thanks in advance for your precisous help
regards
Hana

Hi Hana,
There is a note exist for this error.
Please look into it, it will help you to resolve the issue.
Note 606342 - Tax amount is larger than tax base
Hope this helps,
Regards,
MT

Changing object directory entry from $TEMP to a different package

I have saves SAPscript in $TEMP. How do I change it to a particular object directory ?
Thanks.
Regards,
Tushar.

Rajesh,
Go to SE80 -> Give Development class = $TMP
and you get all the objects under that class, select the desired object and right click on that one, you can see REASSIGN.. if you entered the desired development class then it will be reassigned.
Suresh

FI_TAX_GET_TXJCD_LEVELS error when trying to release billing document.

We are in the process of converting from non-jurisdiction sales tax to jurisdiction sales tax procedure. I have setup our sandbox with the new jurisdiction procedure TAXUSJ and corresponding pricing procedure. So far things are looking pretty good... however. When the user tries to do a release on a billing document, it won't complete and the log shows the error:
System error in routine FI_TAX_GET_TXJCD_LEVELS error code 2 function builder TAX2
I have looked through SAP Notes and found references to this in regards to CRM. We don't use CRM.
I have added jurisdiction codes to the company code and business partners (customers), also sales offices and plant. I have setup the tax codes and the UTXJ condition type with the standard:
UTXJ 0 0 O0
UTXJ 0 1 O0
UTXJ 1 0 O0
UTXJ 1 1 O1
In the previous config, using TAXUS (non-jurisdiction) each of the sales offices was given a tax code, and that is what was used for sale tax. So there are existing (and this is where the release issue arises) documents that use these codes (HQ, SE, NE, SP, etc) rather then O1. Could this have something to do with the error?
Document created in the new jurisdiction config can be released without a problem. It is just occuring with documents created previous to the conversion.
What have I missed in config?
Thanks for any info that may help shed light on this. This is the last stumbling block to converting to the jurisdiction sales tax and we need to get it resolved as soon as possible.
Laurie McGinley

Briefly, for the document that needs to be released, and is getting the 'can't find tax code' error in the notes.
Correct values for TXJCD, TXJDP and TXJLV need to be added to the oringal document records that is to be released, tables: BSEG BSET KNOV and VBRP. In addition look into table KNOV for the field KNTYP. We had to address the KNTYP field in KONV because it stored the code for the previous taxing procedure, which cant be found in the current one. Changing it to the equivalent code for the current taxing proceudure worked.
I capture all the record pre and post change information for each of the changed records should there be a need to go back. But so far it seems to be working. Tho some of the notes indicate the need to add txjcd data to existing records to fix a similar problem, we needed to go a step further and modify records in 2 additional table.
Again. We went from non-jurisdiction method where no jurisdictional information was captured to jurisdictional sales tax. And the issue is around reversing documents that were originally created in the previous taxing procedure.

I can't find the image object menu item when trying to add an image placeholder in dreamweaver cs6

I am new to dreamweaver, and am walking through some tutorials. I can't seem to find the image object menu item to place a image placeholder on my page. Any suggestions? Do I have a setting that is currently hiding its visibility? Thanks (I am currently working with dreamweaver cs6)

They removed it in the new Cloud version of DW CS6.
http://blogs.adobe.com/dreamweaver/2012/10/dreamweaver-creative-cloud-update-12-1-faqs.htm l

Object directory entry when trying to release TR

Similar Messages

Maybe you are looking for