Object Doesn't Exist in Catalog

I have one report on a dashboard that works for everyone (200+) with the exception of 3 users. When these 3 users attempt to run the dashboard - they receive nothing but the title box show up. When they go into edit dashboard - the report (that shows for everyone else) has a little yellow exclamation point - and says "Item no longer exists in the catalog". Each of these users have been able to view this report in the past, and I've checked the report's security settings - and have cleared the cache and had them all sign out and back in. Still they are unable to get this report to return results. I am running 10.1.4.3.1 version of OBIEE.
Any ideas would be greatly appreciated.
Thanks!

As Per my understanding - when your able to view a yellow exclamation mark means - the item was deleted from the catalog / or renamed and saved with diff. name.
Did you check the catalog of the 3 users where the report used to be ?
I hope you have the report in shared folders.
Re-save the report with same previous name and view the results.

Similar Messages

System throwing error " ibase object doesn't exist"

Dear Friends;
in the transaction ib52 when im putting the component number and pressing enter the system is showing me the error
"ibase objec doesn't exist" . Which means system not allowing to search ibase using the component number.
Please help.
shibashish banerjee

Dear Denis,
When I'm putting the component and pressing enter the system should automatically display the ibase related to this component right?
Instead of this the system is throwing me the error " ibase object does'nt exist" . which i feel is incorrect . As per me system should automatically show me ibase , when i enter the component number and press enter.
I checked in ibib and ibin tables as well. No conclusion.
Regards
shibashish banerjee

OM relationship for OD (internal order) object doesn't exist in SAP-HR

Hello,
In SAP-HR, within the OM module, I am trying to link an internal order (OD) as well as a cost center (K) to an organizational unit (O).
But OD object doesn't have standard relationship, as if we could only use this object in infotype 1018 (Account Assignment).
Is it normal??
Thanks,
Stéphane

Hi Stéphane,
External object is one that has master data outside SAP HCM module and in this case OD (Internal order ) if its ouside personnel planning ,there needs to be extra care taken to maintain consitency.please chech t778V.
External Relationships: Simulation Class
interface program need to be devloped should there not be a standar one that suits the need.please also refe SAP Note 390373.
hope it helps
No Worries
KG
Edited by: SAPenjoy:) on Sep 16, 2010 1:35 PM

Interface mapping Object doesn't exist in runtime cache

Hi SDN,
Now I am trying to finish a senario that Getting an IDOC of R/3 into a file by XI. I can get the xml message by tcode IDX5, but always get the following error infromation by IDX5:
===============
Interface mapping Object ID E4815D26AD5B35D2B89A5557DBE045E7 Software Component 2F1990F0E66D11DB9DC2C239C0A8007A does not exist in runtime cache
===============
What happens?
Thanks for your time ahead!
Bruce

HI,
See the below links
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Chilla

Admin object doesn't exist in JND tree.

I am using glassfish 9.1.
I created a admin object with command:
asadmin create-admin-object --host localhost --port 4848 -u admin --passwordfile=D:/ProgramFiles/glassfish/bin/asadmin_password.txt --target=domain --restype javax.jms.Queue --raname swiftmq_rar --property QueueName=Ping@router1 jms/PingAfter successful creation, the jndi name "jms/Ping" can not be found in JNDI tree.
Is this normal? How can I use this admin object if this resource does not exist in JNDI tree?

I am using glassfish 9.1.
I created a admin object with command:
asadmin create-admin-object --host localhost --port 4848 -u admin --passwordfile=D:/ProgramFiles/glassfish/bin/asadmin_password.txt --target=domain --restype javax.jms.Queue --raname swiftmq_rar --property QueueName=Ping@router1 jms/PingAfter successful creation, the jndi name "jms/Ping" can not be found in JNDI tree.
Is this normal? How can I use this admin object if this resource does not exist in JNDI tree?

ORA-12545; Can't connect because object doesn't exist

For the life of me, I can't figure out why I can't log into the server from my client. I get the ORA-12545 error. I can TNSPing the server from the client as well as ping the client.
Can someone please give me a trick to test which layer is causing the problem. Can't find docs on 8i. I'm using 8i.
Thanks in advance,
Bob

Hi,
Please search tnsnames.ora file in your computer. I hope you can find two copy of it. if so please make sure the tns name parameters are correct in both file.
hope you can solve this problem,
Jagal ([email protected])

ODS Activation Failure due to Number range object for char doesn't exist

Hi
I am having problem regarding ODS actvatn, My oDS is gttng fail due to number range for char object doesn't exist.
error when checking sid for ODS.
I have made all tests in RSRV for dat Infoobject
can any one suggest me ...........
points will be assigned
kindly mail me 2 [email protected]

Hi,
chk tis blog.. hope it clears wat buffering is
/people/vikash.agrawal/blog/2006/04/05/load-lots-of-data-147faster148-with-buffering-number-range
What is buffering number range:
Buffer the Numbers ( which system picks up from database -in case of Master Data SIDs & in case of Transaction Data Dimension Ids) and use these buffered numbers rather than hitting the database (for each new master data records or for each new combination of SIDs to create a new Dimension Ids). So the concept is
SID Number Range can be Buffered Instead of Accessing the Database for Each SID
Hope its clear!

SOLVED--"object no longer exists" for Windows shares

If you can see a Windows share in the Finder but can't connect to it, or get the error that says the object doesn't exist, I think I've found the answer. I was trying to mount a connected Western Digital USB drive which was shared from a Windows XP machine. It was seen correctly in Finder, but I could never actually connect to it. It wasn't until recently that I discovered that I was also having a problem connecting to it from another Windows machine, and that led me to find this solution.
http://winhlp.com/node/40
If you still have the error after rebooting your Windows machine where the share resides, increase the value of 15, then reboot. I had to go to 25 to make everything work.

Kelly,
Do you do any DDL on EMP table of HR schema?
I guess, if you do any DDL on EMP, you may loose all the grants, you may need to regarnt permission again.
Jaffar

CX_SALV_MSG doesn't exist

Hi friends,
I am trying create ALV Object Model. I am using Thomas Jung's example. But when I try add an attribute with type named CX_SALV_MSG I give an error. Object doesn't exist. Can I create this object in my system? ( We are using SAP 4.7 version)
So I have same problem with CL_SALV_TABLE....
How can I create them???

Mehmet,
CX_SALV_MSG is an exception and not an attribute. In fact if you use the pattern to get the code, it will automatically be placed in the code.
go to the Patters --> ABAP OO Objects and put the class name as CL_SALV_TABLE and method FACTORY and you will get the entire code in the program.
regards,
Ravi
Note : Please reward the posts that help you.

LOGERROR: **theProduct := index.sucatalog doesn't exist in the catalog!

I keep getting this error in my Software Update Server log:
LOGERROR: **theProduct := index.sucatalog doesn't exist in the catalog!
This is after a clean install of Tiger Server.
Mirrored updates show 91.
I'll upgrade the server to 10.4.6 and hope that that helps.
How do I put index.sucatalog in the catalog?
Thanks,
James.

Gave up.

Category is indexed in another catalog even if doesn't exist in it. Ideas?

Hi All,
We have a situation, where a product belongs to two catalogs, and that product have one ancestor category in one of the catalogs, but not in another catalog. Now, we see that after indexing, the ancestor category of that product is indexed in both catalogs, even though, that category doesn't exist in another catalog. How do we restrict that category to be indexed in non-parent catalog. Kindly suggest some resolutions.
Regards,
Isha

AS you mentioned that the Product is Belongs to the Both the catalogs. So when you are indexing The IndexedItemsGroup.rule property will have Only Null Check of the Parent Catalog Not the category(OOTB Default rule).
Can you please elaborate the Scenario.
Regards
--RAVI

SAP Web Dispatcher - Object Cert doesn't exist.....?

Has anyone ever experienced this error before? This error came about when I created a "Verification PSE" in STRUST to move over onto the webdispatcher.
[Thr 3516] *** ERROR =>   secudessl_Create_SSL_CTX(): PSE "C:\Program Files\SAP\SAPWebDisp\DEV\<domain folder>\sec\SAPSSLC.PSE" not found! [ssslsecu.c   1354]
[Thr 3516] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 4130 (0x00001022) = "Object Cert doesn't exist"
[Thr 3516] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 3516] ERROR in SSL_CTX_set_default_pse_by_name: (4130/0x1022) Object Cert doesn't exist
ERROR in ssl_set_pse: (4130/0x1022) Object Cert doesn't exist
ERROR in af_pse_get_Certificate_static: (4130/0x1022) Object Cert doesn't exist
[Thr 3516] << -
End of Secude-SSL Errorstack -
[Thr 3516] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create CLIENT Credential
        for "C:\Program Files\SAP\SAPWebDisp\DEV\<domain folder>\sec\SAPSSLC.PSE" [ssslxxi.c    2278]
[Thr 3516] *** ERROR => Initialization of SSL library failed -- NO SSL available!
Also this error occurs when I tried to "export certificate" from STRUST.
[Thr 3384] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 3384] ERROR in SSL_CTX_set_default_pse_by_name: (4356/0x1104) PSEFile
ERROR in ssl_set_pse: (4356/0x1104) PSEFile
ERROR in af_open: (4356/0x1104) PSEFile
ERROR in secsw_open: (4356/0x1104) PSEFile
ERROR in sec_parse_PSEInfo_cont: (4356/0x1104) PSEFile
ERROR in d_PSEFile: (18/0x0012) decoding error for : "PSEFile"
[Thr 3384] << -
End of Secude-SSL Errorstack -
[Thr 3384] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create CLIENT Credential
        for "C:\Program Files\SAP\SAPWebDisp\DEV\<domain folder>\sec\SAPSSLC.PSE" [ssslxxi.c    2278]
[Thr 3384] *** ERROR => Initialization of SSL library failed -- NO SSL available!
What I'm trying to do is create the SSL connection between the dispatcher and the SAP Web AS.

Hi,
From the error it is clear that it is unable to access the SAPGENPSE.
Go the fallowing location c:\programfiles\sap\sapwebdisp\dev\domain\sec and see if there is sapsslc.pse file if this dosent   exist fallow the below procedure.
go the c:\programfiles\sap\sapwebdis\ and execute the fallowing command
sapgenpse get_pse -p "c:\programfiles\sap\sapwebdisp\dev\domain\sec\SAPSSLS.pse" -noreq "CN=<FQDN>, OU=<InstallationNumber>, OU=SAP Web As, O=SAP Trust Community, C=DE
Please revert back if you have troubles.
Kind Regards,
vamsi.

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Build error 'CFURLGetFSRef failed - maybe the output directory doesn't exist?' Eclipse

I downloaded and installed the Adobe InDesign Plug-in Editor as an Eclipse distribution, the InDesign SDK and XCode on my iBook G4 with Mac OS X 10.4.10. Creating an InDesign project works fine. I only have to drag-and-drop elements on a form and add some actions.
Unfortunately, I can't get the Ant Build working. I followed the video-tutorials on the Adobe labs site, but I'm still getting this error:
CFURLGetFSRef failed - maybe the output directory doesn't exist?
The error seems to be in the "/Adobe InDesign CS3 Products SDK/devtools/bin/odfrc-cmd" file. I guess it's a SDK problem.
Does anyone know what the reason is for this error? And maybe how I can fix it?

This is the full output.
"Ld "/id5sdk/build/mac/prj/build/InDesign en InCopy plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign and InCopy plug-in" normal ppc
cd /id5sdk/build/mac/prj
/usr/bin/g++-4.0 -o /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in -L/id5sdk/build/mac/prj/../debug/sdk -L../../../build/mac/debug/packagefolder/contents/macos/libs -F/id5sdk/build/mac/prj/../debug/sdk -F../../../build/mac/debug/packagefolder/contents/macos -F../../../build/mac/debug/packagefolder/contents/Frameworks -filelist /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in.LinkFileList -lPublicPlugIn -framework InDesignModelAndUI -framework Carbon -framework InDesign\ and\ InCopy\ plug-in -arch ppc -Wl,-single_module -install_name InDesign\ and\ InCopy\ plug-in.InDesignPlugin/Versions/A/InDesign\ and\ InCopy\ plug-in -Wl,-Y,1455 -dynamiclib -mmacosx-version-min=10.4 -Wl,-Sp -Wl,-executable_path -Wl,../../../build/mac/Debug/packagefolder/contents/macos -isysroot /Developer/SDKs/MacOSX10.4u.sdk
ld: can't locate framework for: -framework InDesign en InCopy plug-in
/usr/bin/libtool: internal link edit command failed"
Anyone who can help me?

Object Doesn't Exist in Catalog

Similar Messages

Maybe you are looking for