Object exists when installing Itunes 11.4 on PC

I've attempted to the latest version of ITunes 11.4.0.18 as of 10/4/14.  I have a PC with Windows 7.  I've uninstalled the 5 major programs (ITunes, Apple Software Update, Bonjour,etc).in the order listed on FAQ recommendation.
Every time I try to install the latest Itunes version, I get the Yellow Exclamation Point Warning pop up statement: "Object Already Exists" when the install status states: "Updating Component Registration."

For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot, and try installing iTunes again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
tt2

Similar Messages

  • When installing itunes on my windows XP I get an error message "Service Apple Mobile Device"

    When installing iTunes on my Windows XP I get an error message "Service Apple Mobile Device (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services".  I don't know what this means and I do not know how to resolve it.  Can you advise please?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.
    iTunes 11.1.4 for Windows- Tips for Unable to install or open

  • Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer

     Windows Server 2008R2 running Remote Desktop Services reports printer process does not exist when installing PDF printer, And when Installing network printers from the domain controller it reports it cannot connect to printer.  I can ping all
    network devices. I can connect to the internet.
    On boot I get a netlogon 5719 error followed by service control manager errors 7023,7001 and a group policy error 1129.
    Clients can connect to the remote application and RDP operates to connect to the server internally and externally.
    The domain controller is another server 2008r2 box. I have scoured the internet but have not found any solutions that work yet.

    Hi,
    After referring to your post, it can be identified that the issue which you are facing is mostly due to some network issue in your environment. Please recheck your network connection issue between computer and domain controller. 
    Can you able to ping with IP address and also with fully qualified name of a domain controller in the users' and computers' domain. If it fails states that name resolution issue with computer and domain controller. Are you using MS DHCP Relay agent then there’s
    available Hotfix for the particular Event ID. Please go through this KB 2459530 to fix the error event ID.
    As per the net logon error 5719 which you are facing states that the client component of Netlogon was unable to locate a DC for the domain it was trying to perform an operation against. Below is one of the reason. If this is being logged on a DC and the event
    refers to the DC's own domain, something might be preventing the client component of Netlogon from starting a network session (to itself or to another DC in the domain). The following event 7001 & 7023 states start & stop operation service. Please
    go through beneath article for more details.
    1.  Event ID 5719 is logged when you start a computer
    2.  Netlogon 5719 and the Disappearing Domain [Controller]
    3.  Event ID 1129 — Microsoft-Windows-GroupPolicy
    Hope it helps!
    Regards.

  • Error Message when Installing Itunes 9.0.1

    When Installing Itunes 9.0.1 I received the following error message
    "The systetm extension "/System/Library/Extensions/CDSDAudioCaptureSupport.Kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product'svendor for an update.
    I don't know anything about this extension and would like some help finding out if I even need it.

    Sean,
    Yes, this is a known defect:  CSCue69477 - CTI Route Port Synch Issue with CUCM.  As per the bug: 
    "This issue will occur if the "SUBSCRIBE Calling Search Space" under Protocol Specific Information in the Template for the CTI Route Ports is configured. To work around this, the "Owner User ID" under Device Information for the Template needs to be configured."
    Regards,
    Jason

  • I get an error message when installing itunes with windows 8, error message is error occured while attempting to create the directory C:\program file(x86)\common files\apple\mobile device support\sync services\schemas\outlook.syncschema

    I keep getting an error message when installing iTunes with windows 8

    See the second box in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT1926 "the feature you are trying to use is  on  a network resource" message error when installing itunes

    "the feature you are trying to use is  on  a network resource"  is the message error I received when installing itunes.  I downloaded the file and saved it.  The same thing happended when I simply ran it as well.

    Hello, uclan1.
    This article will help you with the error that you are receiving. 
    "The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H. 

  • When installing iTunes 11.02 I get an error message.

    When installing iTunes 11.02 I get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." What is the suggested soloution ?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing iTunes 10 I get an error message "Invalid Drive: F:|". ANy advice?

    All I want to do is upgrade from 9 to 10 so that I can run my ipad.
    When installing iTunes 10 I get an error message "Invalid Drive: F:|". ANy advice?

    Bissley,
    I have received this error in the past and it is usually caused by Windows automatically changing your external drive letters when you install. There are two ways around it; first, follow the directions provided by b noir. Second, within iTunes go to Edit > Preferences > Advanced
    Under the advanced options you'll see a recessed section called "iTunes Media folder location". Although you may have set this in the past it, if Windows changed your drive letters it will no longer be valid. Default is usually "C:\blah\blah\mymusic"
    Changing it just a matter of clicking "change" and finding your music folder again or change your drive letter back (if it changed at all).
    If Windows is changing your drive letters, it is best to set them yourself so that everytime you plug in the devices they use the letter you assigned. Here is a link for that process:
    http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-le tter
    Hope it helps.

  • What to do when installing itunes to windows vista home basic an message appears saying"there is a problem with this windows installer package.A program run as part of the setup did not finish as expected.Contact your support personnel or package vendor."

    what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
    "There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
    Need to know because this is driving me nuts now!

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing itunes on PC with Windows Vista, the itunes program "took over" all of my desktop icons.

    When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons.  How can I install it so it doesn't do that?  Thanks!

    You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.

  • When installing itunes 10.7 my computer gets all the way to verifying install and then removing applications and stops.  I get a message that says "unable to complete - there is a file missing.  I tunes has not be completed.  See your package dealer

    I am trying to install iTunes 10.7.  The installation gets all the way to the end and says "removing application" then stops and gives me an error message that states there is a missing file and it cannot complete the configuration.  Please contact my support or package dealer."
    Confused - my old itunes worked fine - haven't removed any programs, etc.,
    Help

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • When installing itunes on windows 7 i get and error, is there a way to fix this?

    I need help. the title pritty much explains it all. I run the setup and select my destination folder, then click install. down the bottem it tells what it is installing. it stops at 'installing apple software update'. it then comes up with a screen saying 'itunes insallation is done. errors acured durin installation. click finish to exit.'

    Although you're getting a different error message, perhaps try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Laptop crashes when installing iTunes 10.7

    Hi
    I've been trying to update to iTunes 10.7 for ages now, but whenever it's installing my laptop crashes and goes to blue screen.
    I'm running Windows Vista Basic 32-bit.
    Anyone had that problem and knows what to do?
    It really bugs me as I cannot connect my iPhone anymore.
    Thanks!

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Maybe you are looking for

  • When i type in my redeem code, it then says my session has timed out. What do i do?

    When I type in my redeem code, it says my session has timed out. How do I fix that?

  • Event dates are not bolded by Date Navigator in Outlook 2010

    Event dates are not bolded by Date Navigator in Outlook 2010 on my own  calendar.  Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is checked. This previo

  • Premier Pro CS6 SAN Workflow

    We have recently made the jump from FCP7 to PP CS6 and have a SAN based workflow.  Today we were told that PP does not support SAN based workflow.  Is this true?  It just doesn't seem right that Adobe wouldn't support it because SAN is becoming the n

  • In which table does INCO2(Incoterms (Part 2) stored.

    In which table does INCO2(Incoterms (Part 2) stored. One can see in po header . Incoterms (Part 2) Additional information for the primary Incoterm. Example If the primary Incoterm is, for example, FOB ("Free on Board"), then the second field provides

  • How do I transition from video to picture?

    I have a video and I want the video to fade into the picture. The video is a painting and then the picture is the real image that they painted. How do I fade into the picture to look like they painted the real image?