Object freezing when clicking and then releasing after moving mouse
Hi there,
When I want to select on object, I click on it.
Then, the object freeze.
I move my mouse wherever I want, wait 1-2 seconds, and the object comes where I am with my mouse.
Could someone explain me what is the problem ? Is there an option checked that shouldn't ?
Thanks a lot
Running on yosemite 10.10.3 and AI CC14 18.1.1
Finally, it's seems like it was an app I installed recently, called "rightzoom".
I uninstalled it, and the problem seems gone. A bit weird, because rightzoom had AI in his exceptions.
Anyway, here is a post about the problem : https://discussions.apple.com/thread/2796058?tstart=0
Thanks a lot
Similar Messages
-
When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info??? Any suggestions?
To reset, press and hold the Home and power buttons until the silver apple appears.
I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
Best of luck. -
How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"
Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz -
I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?
Double click home button, then swipe up on app picture (not the icon itself)
-
firefox freezes when I try to type after reboot of pc and is still frozen now. I am using internet exployer right now. This happens every time I reboot my pc. When I try to type I have to use task manager to close the firefox.
I use dogpile.com as my search engine and when I type in the search bar it freezes my page.
-
I can no longer read PDF files. The window opens and then disappears after a second or two. This began after the last Adobe update. I tried accepting the Adobe terms using Eula.exe but that disn't solve the problem. What do I do?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
-
Locking a table and then releasing the lock...
Gurus,
I ant to lock a table DMS_LO_CD1 and then do certain upodate and then release the lock after that.
How can I d this ?
Thanks.
Regards,
Rajesh.http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=115258&messageID=2656474
Do the following steps..
GO TO SE11
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Hope this helps.
Regards,
Midhun Abraham -
Ipad freezes when clicking mail, contact, calendars
ipad freezes when clicking mail, contact, calendars
Still trying to figure out how to navigate these forum pages. For the last two consecutive days I have opened the default e-mail client on this iPad2 to find that the app will download all e-mail from my accounts and then freeze. I have to hit the power switch to shut off and then restart the iPad -the I can open my individual e-mails. Just like hitting control-alt-delete in the windows OS. Has the e-mail app been updated or something. I haven't knowingly changed anything. By the way , registering for forums is a pain in the butt - I ahink i have screwed up myz old user name and will attack that separately.
Augie
iPad2
Also - this happens once and then after that I can run it ok for the rest of my session. Power down and reboot then try e-mail and it freees, power down reset and it is ok. Has only been for the last two days. -
How to make it selected when clicked and open popup
Hi,
I 've a form in the parent page with many form elements.
I've 2 radio buttons with values "Yes" and "No". I am opening a modal popup when clicked on "Yes" radio button. The modal popup is opening fine.
But when I click "Yes", it' s not selected. After modal popup is closed, when I return to parent page, the option "Yes" is still not selected.
How to make it selected when clicked and open popup?Perhaps try moving the application to your preferred desktop and then right-click it's dock icon > options > Assign to This Desktop.
-
Excel Freezes when Clicking on a Particular Tab within Excel
So, we are currently transitioning to SmartView from the Essbase Add-in. We have been already done a bunch of conversion for both files and VBA code with macros running properly without errors. However, for a particular file, we have been experiencing an issue of Excel freezing when clicking on a specific tab. The tab has no need to be connected to a database and only consists of formulas that are linked to other tabs. The issue only occurs when SmartView is enabled. If it is disabled, and the Add-in is enabled, you are able to click on the tab and navigate the sheet. With SmartView enabled (Add-in either enabled or disabled), as I said, freezes whenever clicking on that particular tab. I was wondering if there is any fix or something that I am overlooking for the file as to why this is happening. I saw some "fixes" online but none seemed to work or even seemed to be reasonable options to try to fix the problem.
Hi,
I just wonder, which Excel version you run and in which version the sheet was created that crashes.
We had Excel freezing for an analysis created in Excel 2003 sheet when running in Excel 2010. To solve this we created an entirely new file, connected the sheet to the cube and then copied over the refresh area from the crashing sheet. You may want to test this to see if it works. However, if you have formula references this needs some extra handling.
In other freeze/crash cases it helped to change the Smart View Options>Advanced: Compatibility section and checked 'Reduce Excel size' and 'Improve Metadata storage'.
/MrD -
2011 MacBook Pro 15" Trackpad missing clicks and spontaneously releasing
Last week I received a new MacBook Pro at work. It seems to have an issue with the trackpad.
Specifically, clicks are not always recognized, and sometimes while I'm dragging a window the trackpad will release the click spontaneously, even though I haven't removed my thumb.
The problem seems to be that even though I hear and feel the tactile "click" response from the trackpad, the internal button isn't actually getting depressed. Likewise, sometimes the internal button will release early, before the tactile "click" you normally get when you remove your finger from the trackpad. If I use a firmer press, it seems to work all the time.
I did take the laptop in to the Genius Bar at my local Apple Store, but they just told me it was normal and to press harder. Now, I've been using apple laptops for a long time, and I use the Magic Trackpad on my desk, so I disagree - It definitely does not feel normal to me. I don't think I should have to remember to "press harder". I'm used to the tactile click response indicating that a click has occurred, and now I can't. I have to feel the click, and then keep pressing harder to be guaranteed that my click is noticed.
Has anybody else had this problem?Last week I received a new MacBook Pro at work. It seems to have an issue with the trackpad.
Specifically, clicks are not always recognized, and sometimes while I'm dragging a window the trackpad will release the click spontaneously, even though I haven't removed my thumb.
The problem seems to be that even though I hear and feel the tactile "click" response from the trackpad, the internal button isn't actually getting depressed. Likewise, sometimes the internal button will release early, before the tactile "click" you normally get when you remove your finger from the trackpad. If I use a firmer press, it seems to work all the time.
I did take the laptop in to the Genius Bar at my local Apple Store, but they just told me it was normal and to press harder. Now, I've been using apple laptops for a long time, and I use the Magic Trackpad on my desk, so I disagree - It definitely does not feel normal to me. I don't think I should have to remember to "press harder". I'm used to the tactile click response indicating that a click has occurred, and now I can't. I have to feel the click, and then keep pressing harder to be guaranteed that my click is noticed.
Has anybody else had this problem? -
my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
I have a 64 gig second gen iPad mini that I updated to iOS 8.2 yesterday with no initial problems. You're probably thinking all's good right? Wrong.
All was good until about an hour ago. When I saw a text notification on the lock screen I swiped right thinking that it wouldn't act any differently from the countless other times that I've done that same action...little did I realize that it would lock up once unlocked. To clarify, when I say "locked up" I mean frozen with nothing on the screen except for the basic design of Messages.Not experienced an issue with my iPad Mini, and I've been running iOS 8.2 since it came out.
What troubleshooting have you tried since the device froze? Is it still froze? First step would be to try and power off the device. If that does not help, then perform a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The device will reboot, and it will have no affect on your data. That should correct things, but if it doesn't, then the next steps are a restore from backup, and if necessary a restore as new. -
I run DeviceDemo sample to send email, when click send email button after f
I run DeviceDemo sample to send email, when click send email button after filling all fields, it took me to EverNote application, can not send email. does anyone has this kind experience? how to fix it?
Hi,
ADF Mobile cannot directly send emails as this is a security precaution of your mobile phone (imagine all applications could send mails without you confirming). Instead the send mail functionality launches the mail client you have configured and fill in the information you provided in the application. The mail function by the way is implemented through Cordova.
Frank -
So I recently got a Mac Mini about two weeks ago and for some reason while I am on it the display will go blank and then return after a few seconds. It is happening very frequently. I checked the HDMI cable, I checked my tv and nothing seems to be wrong with them and I don't know what is going on.
I am getting a bit frustrated because this Mac is brand spanking new and it is totally acting up for no reason whatsoever.
Could someone please help me with this? I don't want my new computer to be useless. I need it.Which TV model do you have?
Be aware of the fact that very many TVs do expect video signals on their HDMI inputs, not data signals from Macs or PCs. Please consult your TV manual if PCs or Macs can definitely be connected via HDMI, or if e.g. only DVI or RGB/VGA connectors are to be used.
In case of DVI inputs for data being present, it's not a problem if an HDMI->DVI adapter, or better, cable is being used.
Many users here are overlooking this potential reason for problems, assuming that HDMI outputs must always communicate with any HDMI input, certainly also because TV manufacturers do not "advertise" such limitations loudly.
AV receivers with multiple HDMI inputs and a single HDMI video output to the TV are typically more "tolerant" and provide a sort of "converter" function. If present, feed a Mac's HDMI signal into the receiver, not the TV directly. If the receiver does not have enough HDMI inputs, consider to connect rather a video source (DVD player or similar) directly to the TV than the the Mac.
Maybe you are looking for
-
How to use query-database() function in transformation?
Hi All, How to use query-database() function in transformation? It is giving four fields but if i write select query in sqlquery field it is saying select node is not found.... plz help me out Regards Pavankumar Edited by: [email protected] on Jul 29
-
Getting old podcast help ?
Hi All, I love podcasts and subscribe to about 25 different ones. When I bought my iPod I found lots of back episodes. I listened to a lot and deleted the references to others that I thought I would not listen to. I came upon a episode of one today t
-
[SOLVED] Run cronjob asynchronous, but preferably at a given time?
Hello! How can I add a cronjob, which should run preferably at a specified time (like every day 5 o clock in the morning), but if the computer is off at that time, it will run some other time? To make it run every day at 5 o clock, I can use "00 05 *
-
My iphone 5 doesnt sink to my itunes
I cant get my new iphone5 to sink up with my itunes. it said that i need to upload the new itunes and I did . now its saying that my softwear is to old on my comupter
-
HT5312 I don't remember my security question answers! What do I do???
I don't remember my security question answers! What do I do???