Object ID req for READ_TEXT FM for IK02 tocde

please tell me the object ID for tcode:IK02,i want to find the text of measuring point.
pls tell me the way how to find this,to get the FM Read_Text working.
vipin

Text Name       000000000012 "Measuring Point number
Language        EN
Text ID           LTXT
Text object     IMPTT

Similar Messages

The same Object Version Number for the same person id multiple times

Hello all,
I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

Hi Baal666bobo,
The person table is date-tracked, so the PK has effective start and end dates as well.
Get the correct record with sysdate(or any particular date) and then check the OVN.
Cheers,
Vignesh

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Error : 'No object identification permitted for infotype 0582, subtype LTA'

Hi Experts,
               While executing the program 'HINUINFO_UPDATE'
i am getting an error 'No object identification permitted for infotype 0582, subtype LTA'.
               After the approval for LTA claim is done in ESS i have executed the program 'HINUINFO_UPDATE' to update he infotypes 15 and 582. Infotype 15 is getting created but while creating the infotype 582 system gives the above error message.
             In the detailed error log system gives the following message.
                "You attempted to access a data record with the object identification 1. However, according to the Customizing settings, object identifications cannot be used for subtype LTA of infotype 0582".
        Can anybody please assist me how to solve this problem. Helpful answers will be rewarded.
Thanks and Best Regards,
Sanoj.

Hi ,
Did any one find solution for this ? Please reply how to fix this issue.

Use OBJCLASS object of Emigall for Class & characteristics creation in FL

Hi Fritz,
Good day,
I want to use OBJCLASS object of Emigall for
Class and characteristics cration of Functional Location, The object is
desiged for Equipment only,
I read the document of this object which says
that it can be modify to use for functional location as well by changing
some rule, I tried by changing the field "Name of database table for
object" from the standard which is made for DEVICE/EQUIPMENT
I need your help to modify the rule to use this object for class and
characterstic creation for Functional Location, the migration object field is set to Device
which I want to change to FUNCLOC but that field is not modifiable.
Can you help me Fritz
Regards,
Robert

Robert,
Yes you are right. The following changes have to be made:
HEADER-OBJECT_TYPE need to be set to IFLOT (Fixed Value or Transfer field rule)
DATA-FIELD need to be set to TPLNR (Fixed Value or Transfer field rule)
DATA-VALUE need to be set to either CONNOBJ or DEVLOC (Via KSM field rule)
Kind regards,
Fritz

Web Dynpro Java : Failed to get deployable object part info for component

Currently we have a web dynpro java project which connects to the ABAP backend with Web Services. Everything seems fine, and when we transport to the production server via NWDI, we have the following error. Everytime we try to access the application , the error is occurred.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to get deployable object part info for component com.sie.attachmentcomp.AttachmentComp
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.getComponentDeploymentDescription(ClientComponent.java:784)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:934)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:177)
 at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149)
 at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:116)
It is working properly in our development , and testing environment. Only production has this error. And one weird thing is that this particular error occurred only sometimes to some user. For example; I could not access to the application with this error yesterday but my friend can access. Today, I can access in the morning but my friend cannot. For another friend , Yesterday he can access by using IE but not by Firefox. But today Firefox is fine but not with IE. It seems crazy.
For more information, in our J2EE engine for the production server, we have 3 server nodes (clusters). And we are not sure it is the source of the problem. Is there any solution , and any way to know from the application that we are on which server?
We also go and check from the Content Administrator in Web Dynpro Console. Under our project name, in the list of Components, sometimes we can see AttachmentComp but sometimes not.
Please help us as our project is about to go-live next week.
Thanks,
Yu

Hi Meenge,
Please check below document for finding root cause for "Failed to start deployable object part info for <development component> and application <application name>"
http://help.sap.com/saphelp_nwce711core/helpdata/en/44/7716e1633a12d1e10000000a422035/frameset.htm
OR http://help.sap.com/saphelp_nw04/helpdata/EN/f4/1a1041a0f6f16fe10000000a1550b0/frameset.htm
Hope it helps
Regards
Arun

Object Services Attachements for URL Links

Hi Guru,
I have to create interface for Object Services Attachments for URL links.
Scenario is
Drad Table:
DOKOB = PTRV_HEAD
DOKNR = 0000000000000001000000000098
objky = 0050000088\
Draw Table:
doknr = 0000000000000001000000000098
filep: rgenbust:/DCTM370097578000AD0C
Create object service url attachment with:
http://rdgvmws10:8080/WebAccess/TEServlet.ser?docbase=rgenbust&sapLinkId=
appended to FILEP after the /
to make a link of:
http://rdgvmws10:8080/WebAccess/TEServlet.ser?docbase=rgenbust&sapLinkId= DCTM370097578000AD0C
I unable solve this issue can any help with the source code.
I need to create program with scratch. Can any body tell me how to start the program. First which table i need to read. How to retrieve URL append to FILEP field. I would appreciate if any body help.
Thanks
Ashraf

Hello,
See hyper-links below:
[How-To: Offline approval - Logon link does not work|http://wiki.sdn.sap.com/wiki/display/SRM/Offlineapproval-Logonlinkdoesnot+work]
[KBA 1511180 - The hyperlink in the offline approval email is incorrect|https://service.sap.com/sap/support/notes/1511180]
Regards.
Laurent.

How to increase the number of data Business Object can pull for a report?

Hi,
I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
Thanks

Bobby,
to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
in order to check the setting in source system SBIW--> General Settings --> Control Parameters for Data Transfer.
we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
All the best.
Regards,
Nagesh Ganisetti.

No object type found for the corresponding message in BPM

Hi All,
I have a BPM scenario where i pick a file and based on a condition in the Switch i send the meesage to Mail or Proxy.
When i tested the scenario i got error as "no object type found for the message check the corresponding process activated" error in the call adapter step.
I checked in sxi_cache, IP is active with 0 as return code .
When checked in sxmb_moni_bpe, under process selection it says "No workitem exists"
In SXMB_MONI, under inbound i clicked PE but got error as "Unable to perform action fro the selected Message" is displayed.
Im new to BPM so please tell me as what Im missing exactly.
Thanks

Hi Sachi,
Delete the Integration Process from ID and reimport it. Also check the status of your BPM in T Code SXI_CACHE....if return code is not '0' then re-activate your integration process..
Try REPEAT ACTIVATION on SXI_CACHE...
Have a look into this..
Re: Stuck in BPM Transformation process Async to Sync Scenario
Regds,
Pinangshuk.

BPM (IP) Error: "No object type found for this message [...]"

For your info.
I have searched SDN today for a solution to an error message found in XI message monitor (trx SXI_MONITOR) when sending a message to BPM:
No object type found for this message; check the activation of the corresponding process
Well, I found a lot of threads, but with no good answer for me.
So, here's my self-solution: I was just missing the Interface Determination (really don't know why) bringing from Outbound to Abstract message interface. So XI message was definitely correct.

Hi,
Make sure that the first receive step in your integratiopn process uses the abstract interface that u defin in the interface determination.
Also check if you have used all the objects that you have created. Some times 'No object type found' error happens if your BPM is not activated.
Also check the activation log and see if there are any errors. Refrech the cache in SXI_CACHE. Check if the return code is 0.
Hope this helps.
Regards.
Praveen

Error "No status object is available for Unknown Object " in Shopping Cart

Hi all,
We are getting error "No status object is available for <Unknown Object>" while creating shopping carts of any type .
Please suggest if any configuration setting needs to be done.
Thanks and Regards,
Navdeep Malik

Dear Navdeep
The error is likely caused by one or more entries in table BBP_DOCUMENT_TAB that are without objkey or guid.
did you delete some entries from SRM transaction tables?
Check table BBP_DOCUMENT_TAB entries to see any GUID which is not present in the system.
You can verify this by checking whether there is an entry in CRMD_ORDERADM_H (header) table
with GUID = <guid stored in bbp_document_tab>
Regards
Lauren

Create Object and Subject for Application Log

Hello Experts,
Could anyone tell me how to create the Z Object and subobject for the Application Log.
ie) BALOBJ_D & BALSUBOBJ
Could you please tell me the Tcode for that.
Since I have to save the application in the new object so that it can be displayed using this Key.
Thanks & Regards,
Vasanth

Hello Vasanth
The transaction is SLG0 (Object Maintenance).
Regards
Uwe

Error coming " A BS 001 No status object is available for SDI 0 "

Hi Experts,
I am facing a issue.. I am creation a sales order using BAPI " BAPI_SALESORDER_CREATEFROMDAT2 "
In one scenario, I am able to create Sales Order with Status Profile..
But For second scenario, its giving error like "A BS 001 No status object is available for SDI 0" .
Between both scenario, only difference is Distribution channel and Condition record.
DATA : wa_order_header_in TYPE bapisdhd1,
gt_order_partners TYPE STANDARD TABLE OF bapiparnr,
gs_order_partners TYPE bapiparnr,
gs_order_partners1 TYPE bapiparnr,
gt_order_items_in TYPE STANDARD TABLE OF bapisditm,
gs_order_items_in TYPE bapisditm,
gt_order_conditions_in TYPE STANDARD TABLE OF bapicond,
gs_order_conditions_in TYPE bapicond,
gt_order_schedules_in TYPE STANDARD TABLE OF bapischdl,
gs_order_schedules_in TYPE bapischdl,
* gt_return TYPE STANDARD TABLE OF bapiret2,
* gs_return TYPE bapiret2,
gt_error TYPE STANDARD TABLE OF bapiret2,
gs_error TYPE bapiret2,
gt_log TYPE TABLE OF zsd_ecomerr,
gs_log TYPE zsd_ecomerr,
it_item_temp TYPE TABLE OF zst_sfdc_so_items_dom WITH HEADER LINE,
lt_return TYPE STANDARD TABLE OF bapiret2,
ls_return TYPE bapiret2,
lt_order_conditions_in TYPE STANDARD TABLE OF bapicond,
ls_order_conditions_in TYPE bapicond,
ls_sfdc TYPE zsd_sfdc_order .
DATA: wa_order_header_inx TYPE bapisdhd1x,
gt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
lt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
gs_order_items_inx TYPE bapisditmx,
gt_order_schedules_inx TYPE STANDARD TABLE OF bapischdlx,
gs_order_schedules_inx TYPE bapischdlx,
gt_order_conditions_inx TYPE STANDARD TABLE OF bapicondx,
gs_order_conditions_inx TYPE bapicondx,
lt_order_conditions_inx TYPE STANDARD TABLE OF bapicondx,
ls_order_conditions_inx TYPE bapicondx,
ls_order_items_inx TYPE bapisditmx,
lv_kbetr TYPE kbetr VALUE '10',
lv_curr TYPE waers ,
lv_ihrez TYPE ihrez ,
lv_knumh TYPE a005-knumh.
DATA:isrno LIKE vbap-posnr.
DATA: x_orderitemx LIKE bapisdh1x.
TYPES: BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
mwsbp TYPE vbap-mwsbp,
END OF ty_vbap.
DATA: lv_lfstk TYPE vbuk-lfstk,
lv_cmgst TYPE vbuk-cmgst,
lt_vbap TYPE TABLE OF ty_vbap,
ls_vbap TYPE ty_vbap,
lv_bstnk TYPE vbak-bstnk.
****// Checking PO Type. This is mandatory from SFDC
IF sfdc-potype <> '' .
****// Checking here, Whether SFDC Order ID already exist or not. ***//
SELECT SINGLE * FROM zsd_sfdc_order WHERE sfdcorder = sfdc-sfdcorder AND land1 = 'IN'.
IF sy-subrc <> 0.
****// SO creation Process
wa_order_header_in-doc_type = 'ZHOT'.
wa_order_header_in-sales_org = '2700'.
IF sfdc-potype = 'SFSD'. " S & D
wa_order_header_in-distr_chan = '30'.
wa_order_header_in-division = '00'.
ELSEIF sfdc-potype = 'SFHO'. " Hospitality
wa_order_header_in-distr_chan = '33'.
wa_order_header_in-division = '00'.
ENDIF.
wa_order_header_in-purch_date = sfdc-purch_date.
wa_order_header_in-purch_no_c = sfdc-sfdcorder. "SFDC Order ID
wa_order_header_in-doc_date = sy-datum.
wa_order_header_in-currency = 'INR'.
wa_order_header_in-ref_1 = sfdc-purch_no. "sfdc-sfdcorder.
wa_order_header_in-po_method = sfdc-potype.
wa_order_header_inx-updateflag = 'I'.
wa_order_header_inx-doc_type = 'X'.
wa_order_header_inx-sales_org = 'X'.
wa_order_header_inx-distr_chan = 'X'.
wa_order_header_inx-division = 'X'.
wa_order_header_inx-purch_no_c = 'X'.
wa_order_header_inx-purch_date = 'X'.
wa_order_header_inx-doc_date = 'X'.
wa_order_header_inx-currency = 'X'.
wa_order_header_inx-ref_1 = 'X'.
***// Ship to party
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = sfdc-kunag
IMPORTING
output = sfdc-kunag.
gs_order_partners-partn_numb = sfdc-kunag.
gs_order_partners-partn_role = 'WE'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_order_partners-partn_numb
IMPORTING
output = gs_order_partners-partn_numb.
APPEND gs_order_partners TO gt_order_partners.
CLEAR: gs_order_partners.
***// Sold to Party
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = sfdc-kunnr
IMPORTING
output = sfdc-kunnr.
gs_order_partners-partn_numb = sfdc-kunnr.
gs_order_partners-partn_role = 'AG'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_order_partners-partn_numb
IMPORTING
output = gs_order_partners-partn_numb.
APPEND gs_order_partners TO gt_order_partners.
CLEAR: gs_order_partners.
***// Clubed all materials
LOOP AT it_items.
it_item_temp-matnr = it_items-matnr.
it_item_temp-kwmeng = it_items-kwmeng.
it_item_temp-kwert = it_items-kwert.
it_item_temp-reg_dis = it_items-reg_dis.
it_item_temp-add_dis = it_items-add_dis.
it_item_temp-tann = it_items-tann.
COLLECT it_item_temp.
ENDLOOP.
***// Saving Line Item data
LOOP AT it_item_temp.
isrno = isrno + 10.
gs_order_items_in-itm_number = isrno.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = it_item_temp-matnr
IMPORTING
output = it_item_temp-matnr.
gs_order_items_in-material = it_item_temp-matnr.
gs_order_items_in-plant = sfdc-werks.
gs_order_items_in-currency = 'INR'.
IF it_item_temp-tann = 'X'.
gs_order_items_in-item_categ = 'TANN'.
ENDIF.
APPEND gs_order_items_in TO gt_order_items_in.
CLEAR gs_order_items_in.
SELECT SINGLE knumh
INTO lv_knumh
FROM a005
WHERE kappl = 'V'
AND kschl IN ('ZR04', 'ZR00')
AND vkorg = '2700'
AND kunnr = sfdc-kunnr
AND matnr = it_item_temp-matnr.
IF sy-subrc = 0.
SELECT SINGLE kbetr
INTO it_item_temp-kwert
FROM konp
WHERE knumh = lv_knumh.
ELSE.
gs_order_conditions_in-itm_number = isrno.
IF sfdc-potype = 'SFSD' . " Sales and Distribution
gs_order_conditions_in-cond_type = 'ZR04'.
ELSEIF sfdc-potype = 'SFHO'. " Hospitality
gs_order_conditions_in-cond_type = 'ZR00'.
ENDIF.
it_item_temp-kwert = it_item_temp-kwert .
gs_order_conditions_in-cond_value = it_item_temp-kwert .
gs_order_conditions_in-currency = 'INR'.
APPEND gs_order_conditions_in TO gt_order_conditions_in.
CLEAR gs_order_conditions_in.
gs_order_conditions_inx-itm_number = isrno.
gs_order_conditions_inx-cond_type = 'X'.
gs_order_conditions_inx-cond_value = 'X'.
gs_order_conditions_inx-currency = 'X'.
gs_order_conditions_inx-updateflag = 'X'.
APPEND gs_order_conditions_inx TO gt_order_conditions_inx.
CLEAR gs_order_conditions_inx.
IF sfdc-potype = 'SFSD'.
***// Regular Discount to Customer
IF it_item_temp-reg_dis <> '0.00'.
gs_order_conditions_in-itm_number = isrno.
gs_order_conditions_in-cond_type = 'ZDID'.
gs_order_conditions_in-cond_value = it_item_temp-reg_dis * lv_kbetr. " 10 .
gs_order_conditions_in-currency = 'INR'.
APPEND gs_order_conditions_in TO gt_order_conditions_in.
CLEAR gs_order_conditions_in.
gs_order_conditions_inx-itm_number = isrno.
gs_order_conditions_inx-cond_type = 'X'.
gs_order_conditions_inx-cond_value = 'X'.
gs_order_conditions_inx-currency = 'X'.
gs_order_conditions_inx-updateflag = 'X'.
APPEND gs_order_conditions_inx

Dear Marthanda,
Is there any Status Profile attachec in to your Sales Order Type in T. Code: VOV8 (Tab: Transaction Flow, Field: Status Profile)?
If yes, remove it.
If not, then...
Check error with:
T. Code: SM13/ ST22
For more info, refer link:
Error in the status table JSTO
Hope, this may help you.
Best Regards,
Amit

No object type found for this message

Hi all,
I have a file 2 file scenario which works fine.
I tried implementing BPM in the same scenario following the link:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
The sender channel is working fine and the file gets deleted from the source folder.
But the output file is not getting generated.
The error msg displayed in SXMB_MONI is:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What can be the possible problem.
Pls help
Thanks in advance
Regards,
Neetu

Hi,
>>Are you getting 2 entries in the SXMB_MONI for this File to File Scenario?
 No i am getting a sigle entry in which the sender service is the file system and the receiver service is the Integration Process.
>>Do you have 2 receiver determinations.
i.e 1) File to Integration Process
2) Integrtaion Process to File
 Yes i have the above 2 receiver determinations.
>>Also go to SXI_CACHE and check the Runtime version of your Integration PRocess.
 the runtime version of my integration process is 2.
I also tried activating my integration process in SXI_CACHE but the version remains 2.
What can i do next?
Pls guide
Regards
Neetu
There is one SAP note, but may not be related here.i.e 816778

Can we check the Objects modifiable " option for standard objects

Dear Friends
In IR , we have imported SRM SERVER->SRM SERVER5.5
Then we have checked the option "Objects are modifiable" then we imported the IDOC from R/3 system under SRM SERVER 5.5 swcv.
Then created the mapping.It is working fime.
how ever i am not sure whether it is right process.Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
Regards
chandra

Hi Jai,
 >>>Can we check the "Objects are modifiable" for standard compoents delivered by SAP????
No. As best practise you are not supposed to do so.
In order to implement any changes in the mapping we can do it rite.
Because recently i have applied one SAP note to my SRM swcv and one of the MM object was changed according to the requirements.
Thanks,
Prasanthi.

Object ID req for READ_TEXT FM for IK02 tocde

Similar Messages

Maybe you are looking for