Object Indicator field in Report painter

we are looking for some field details in RWCOOM table like object indicator. There is object indicator field name in CCSS table. We want to ignore planned cost of service orders from the project planned cost as there is already planing of cost at project level. The same cost element is used for cost planning in Project builder and service order
Please provide us some option where we can restrict planned cost of the
orders other than network to show in project reports.
Thanks & Regards,
Ranjan

In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast), and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
Thank in stack
Nilesh Shete

Similar Messages

How to add new fields in report painter without library

Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhan

hi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest

Settinf selection fields in Report painter

hi,
i need to know how to select fields in report painter as selection fields or input fields?
i just have an idea of library where we select fields.
but how to select selection screen fields?

hiiii
refer to following link..it will help you for report painter
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
regards
twinkal

Adding field in Report Painter

Hello Gurus,
I am working in the Report Painter PR20-001.
My requirement is to add a new column in the output of the report but even when i am able to add a new field and save it on the reports execution i am unable to view the added field in the output.
Kindly tell me the entire procedure to add a new field in the output of the respective report painter output.
Regards,
Swati.

Hi,
Go to Global Parameters Definitaion in report painter, variable will be used only along with the field, just in global paramerters enter your desired field and click in next column, system will show you a pop up select your variable for that field...
now its just done run the report and test it!
If you still not make it refer to standard report of such kind, you will surely get it....
Regards,
Sayujya

Selection Field in Report Painter Report

Dear All,
Could any one tell me the procedure to add new field at selection screen for the report painter report ? To change the report painter selection screen i have to change the Report group or Report of the report group?
Thank in stack

In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast), and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
Thank in stack
Nilesh Shete

Custom fields in Report painter in CCSS table

Hello Experts,
I am in a processes of developing a report painter with custom fields in the selection screen.
The custom fields are available in PRPS table.
With hard difficulties I brought the custom fields in selection screen of the report painter.
I have added the fields in the structure CI_CC1S
Everything is fine. But if I enter a value in the custom field, the report is not fetching any data.
These custom fields are related to the WBS element.
For example if the value of the CUSTOM field is 'AAA', then I want to retrieve ony the WBS element which has 'AAA'.
Somewhere I am missing a procedure.
Could anyone suggest how to achieve this.
Thanks !!!
Best Regards,
Vasanth M

Any Suggestions

Remove fields from report painter

Hi,
I try to create a z transaction code for my report which was built using the report painter tool. I got additional fields like read mode, print report and rebuild frozen report data on the selection screen. How can I remove these fields to make the selection screen identical to the one when executing in report painter tool? Please help!
Thanks,
Chuong

Hi,
You can change the transaction type:
Goto SE93 --> Click Change --> In menu bar click on Edit --> Change Transaction type --> Select program and selection screen (Report Transaction) radio button and Save.
Also make sure that you have selected all the GUI support check box.
Activate the transaction and execute.
Hope this may work..
Regards,
Prashant

Show "Level" field on report painter

Dear SAP Gurus
On report painter for PS, I want to show "Level" field (PRPS-STUFE)
as selection field. But, it seems "Level" is not in the selection.
Pls let me know if you know the solution.
BR
Y.Kaneko

I could solve the problem.
Y.Kaneko

Maximum size to reference text fields in report painter

I have created a library for report painter but reference text fields were not transfered because of their size exceed 24 character long. is there some SAP procedure to extend this size at the moment we are creating the library? Thanks in advance for support me.

Hi Francisco
Firstable I created a structure evaluation using SAP TC MCS7 and took the own customized table that was set up for SPL porpuses. this table contains several fields including text fields and now we would like to take them for set up several report painter but I noticed that this kind of fields are not available when I created the library using GR21 also when I tried to create the set using GS01 appeared a error "this field is bigger than 24 characters" or something like that.
SGTXT              Text Field                      50
ZZBKTXT          Text Head Reference      25
ZZKIDNO          Payment Reference        30
Thanks in advance to take time for my research.
Regards

Report Painter - ERP Financials - Question on Value Variable useage

I want to use a value variable that works in Report Writer (table GLPCT, field MSL [quantity] but cannot select MSL as a variable field in Report Painter to insert the same variable (it is not a selectable characteristic) using the same Library and Table.
Is there a way to make the field selectable in Report Painter in order to select a value variable that uses the field MSL ? It is a valid field in the Library that I am building the report in.
In building the columns, I can select characteristic fields such as:
Ledger
Record Type
Version
Fiscal Year
Profit Center
Functional Area
Account number
Period
etc
but not MSL Quantity. Is there configuration to make this (or any field) accessible to Report Painter ?
Any advice is welcome.....
Thanks......

Quantity is a key figure. When you create the column values you would get this from the key figure drop list.

Add fields to reporting table/structure CCSS

My customer has defined some new fields (Z......) for WBS reporting in table PRPS. They would like to use these fields in report painter reports, but we have not managed to make them available in the library used (6P3). In order to make that happen they must show in the reporting table/structure used (CCSS) I guess? According to SAP there's no "easy way" of doing this, but obviously it should be possible.
Can somebody give ma an idea how this can be done?

Eventually we manage to get the customer defined field to show up as a characteristic in the relevant library. The reason we struggled with this was the defined length of the field. SAP does not accept a characteristic with a defined field length of more than 24 characters (we had 30). We ended up redefining the length of the field directly in include CI_CC1Z.
Edited by: Roar Sørli on Feb 5, 2009 2:52 PM

Need to add Purchase Order field in Standard report in report painter

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi Subramaniyam,
You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

Report Painter Library: troubles with new field in the additional structure

Hi, ALL!
I'm creating a new field in the Report Painter table GLFUNCT. Do do it I created my field in the additional structure GLDBZ for GLFUNCT and create an row in the T804C table for new field.
Who has expirience in customizing using T804* tables? What tables should be used and how? I have the following troubles:
- I do not see the new field as characteristic in the library - I don't know the customizing table to set fields from additional structure as characteristic
- in the generated Report Painter program my new field exists but call of filler routine is always disabled
Thanks
Tatiana

Hi Shabitha,
just wondering if you ever found an answer to this, as i'm searching for info on same matter.
Thanks, Regards,
Okan Yarligan

Report painter object name change during transport

We have a requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings .We have also done implicit enhancements for all these reports to make change in the behavior of new fields .This is working fine in the development client but the problem is once we transport this to Quality system new reports get generated( With new name ) and implicit enhancement will be lost.
For E.g.:
In development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ" (In this program we have done implicit enhancement )
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Rgds
Sameer

Hi,
have you looked at export/ inport functionality (gr57/ gr58) or what mode of transport are you using?
Regards
Hein

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

Object Indicator field in Report painter

Similar Messages

Maybe you are looking for