Object is locked ( Plan ver.,obj.ty.,obj.ID )

Hi Experts ,
I got one message while processing IDOC like " A lock key has been set for the object.The object is : plan version,Object Type,Object ID."...If anyone knows,plz guide me....

Hello
The reason why you get this lock error could be that someone was locking it when the IDOC was posted. Or it could also be that the object is sent in several IDOCs, and the object is locked in one IDOC so if the second IDOC is also sending the object, it is not fully posted as it was locked in the first one. In that case please check [SAP note 418212|https://service.sap.com/sap/support/notes/418212].
Best regards
Joaquin

Similar Messages

  • Object moving locked in marketing plan

    Hello,
    We have created a marketing plan with a specific nomenclature.Then we have released it so that the budget can be transfered to BW and then to R/3.
    But it shows the status as Object moving locked where as it should be with status approved and released.
    Will there be any problem in future if the marketing plan is of staus object moving locked.
    Regards,
    Divya

    Hi Cristina,
    Check into Customer Relationship Management->Marketing->Marketing Planning and Campaign Management->System Landscape->Define ERP Integration Type
    I hope that helps.
    Best regards.

  • Locking plan versions , plant wise

    Hello experts,
    Requesting your expert advice in the below requirement of ours.
    The requirement is to plan cost  using plan versions, period wise. This is achievable in CJR2.
    Now when the user is planning cost for the next month, he would like to lock that plan version
    for the previous month. This also can be achieved by T-code OKP1.
    But the users are restricted to each plant. So the users in plant XXXX, if he locks the CO version say AAA
    the other users in plant YYYY can still be able to plan with version AAA for that period.
    In one statement, this is like locking planning version by plant wise.
    Do we have any options available for this in SAP.
    Or any other suggestions to carry out cost planning , plant wise.
    Thanks in advance.
    Regards
    Sandeep

    I think you need to go for a Z development.
    Create one Z table and maintain the combination of user and plant.
    Use a Z tcode for cost planning where you give plant as selection field and also use authorization object to check whether th user is available in the Z table maintained. and also update another Z table where plant status locked after cost planning.

  • Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

    Hello,
    I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template. 
    So, I now want to try and update my service template.  However, whenever I try to do anything with it, in the services section, I receive the error:
    Unable to perform the job because one or more of the selected objects are locked by another job.  To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object.  ID 2606
    Well I tried that and there doesn’t seem to be a job locking the object.  Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all.  I tried running the following query in SQL:
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
    I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
    Can anyone help?

    No one else had this?

  • Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

    I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
    Error (2606)
    Unable to perform the job because one or more of the selected objects are locked by another job.
    Recommended Action
    To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
    I have already tried running the following command in SQL Server Management Studio
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    I received this error back:
    Msg 8169, Level 16, State 2, Line 1
    Conversion failed when converting from a character string to uniqueidentifier.
    I have also tried rebooting both the host and the Virtual Machine Manager Server.  After rebooting them both, I still receive the same error when trying to remove the host.
    Here are my server details
    VMM Server OS = Windows 2012 Standard
    VMM Version = 2012 R2 3.2.7510.0
    Host OS = Windows 2012 R2 Datacenter
    Host Agent Version = 3.2.75.10.0
    SQL Server OS = Windows 2012 Datacenter
    SQL Version = 2012 SP 1 (11.0.3000.0)

    Hi there,
    How many hosts are you managing with your VMM server?
    The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
    If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
    Thanks!
    Cheng

  • The requested object is locked by another transaction

    Hi All,
    I got a problem while loading data from an ODS to another ODS, it shows 450 records but request is red, it says
    'The requested object is locked by another transaction'
    Message no. MC602
    Diagnosis
    A lock requested by calling an ENQUEUE function module cannot be provided because the object in question has already been locked by its own transaction.
    Technical Information: The C_ENQUEUE routine returns the following values:
    COLLISION_OBJECT = ERSMONFACT
    COLLISION_UNAME = SINGH
    System response
    The ENQUEUE function module triggers an appropriate exception. If this exception was not intercepted by the application program, it leads automatically to the active SAP transaction being cancelled.
    Procedure
    Once the ENQUEUE function module is called, the application program should intercept this exception and react to it appropriately.
    I tried SM12 but there is no lock entry, can u suggest some thing?
    Regards,

    Hello,
    here your dso seems to be lock as some read and write opertaion is happening at the time u r running the dtp.
    Here two things to look :
    1.Check the error that ur getting while running a dtp the process monitor etc try to find the request id which has locked the dso . Copy that request id go to t-code RSRQ see whats this request who is user,target etc..contact user for cancelling the job if it has been stuck for long long time. Copy the JOB ID from  RSRQ for that rquest go to SM37 give the date as there in RSRQ and kill the job
    2.GO to SM12 try to search the object there and remove the lock.
    Thanks,
    Deepak

  • IDOC - process code with error "Application Object Type not planned'

    Hi all,
    I am doing an inbound idoc.... in TCODE we42, i trying to put function module which i created, attached to the process code.
    However, when i put my function module ZIDOC_INBOUND to the process code... it comes out error, 'Application Object Type not planned.'
    Why is this so?
    Please advice...
    Thanks and regards...
    William Wilstroth

    HI all,
    I had solved this problem. I should have gone to we57 to tie the function module.
    thanks.
    William Wilstroth

  • Problem in HRMD_A Idocs: Object is Locked

    Hi Everyone,
    I would like to ask for assistance on the problem below.
    We've encountered almost everyday failed HRMD_A idocs. Almost all of the idocs have the same error message: "Object is Locked. A locked key has been set for the object."
    The object type is "P".
    Can you help us on how to solve this problem?
    Thanks in advance!

    Hi,
    For the locked object the sender system itself will not send the idoc.
    and hence the error for the lock object might have been seen in the sender system and not the receiver system.
    Yes you can process the idocs which are in error in the receiver system by frequently scheduling reports like
    RBDMANI2-Schedule update of idocs with errors and
    RBDAPP01- for ready for transfer idocs
    I suggest you use the bapi way of transferring data, where the receiving system reads data from the sender system once a day and reads only that data which is changed during that date.
    Regards,
    Divya

  • Business Objects and Demand Planning Book

    Has anyone combined the functionality of Business Objects and Demand Planning into a single view?   The requirement is to provide enhanced analytics (near real-time) within DP.  We are on version 5.0.  Ideally, it will a single view (table and graph -similar to standard layout) where both DP and BO are called with the same selection.  I have a method to access the data near real time.  What are the options to acheive this?  Any ideas will be helpful.
    Regards,
    James

    Thanks Dave.  I created a virtual cube in APO to connect BO.  I can retrieve the data fine.  I was wondering if there is a way to integrate BO and the planning book so that I will have one view to see both applications.  For example, I called /zsapapo/sdp94 and get the planning book and BO analytics.  Essentially, I want the BO to replace the standard graphics in the planning book.  So, I would have a table at the top and BO dashboard at the bottom of the planning view.  Any ideas how to achieve this?
    The other question is around using a function module or BAPI to connect a virtual cube to LC to retrieve real time information.  Are you aware of any drawbacks to using a function module or BAPI to retrieve data instead of the DataSource?

  • ** SMQ2 - Object is locked by PIAFUSER - Message Has Errors

    Hi Friends,
    In SXMB_MONI, for a particular message, in the Queue column, we have 'red color' time bomb symbols. It shows 'Message Has Error'. When we double click the queue. we can see an error message 'Object is locked by PIAFUSER'. So, how to solve this problem and restart the message ?
    Kindly help friends.
    Kind Regards,
    Jeg P.

    Hi
    1)  clear the queues in SMQ2,first try to activate them,if that doesn't work them delete them
    2)You may need to re-register your queues.
    Follow SXMB_ADM -> Manage Queues -> Deregister Queues
    Afterwards, re-register the queues and activate from the same screen
    3)Only use SMQ1 (outbound queues) and SMQ2 (inbound queues) if re-registering doesn't fix it. You will need to give the queues sometime to get activated so be patient.
    4)From SXMB_MONI go to Queue ID of the message, a click here shall take you to qRFC monitor.
    if the messages are stuck, you should see an entry indicating number of messages stuck in the queue.
    a double click on the entry shall take you to detailed list.
    if the messages are stuck because of any error (other than queue not registered etc for e.g. a message failure) then the first message shall show you that.
    if indeed you find a message stuck in the queue then the way is to delete the stuck message (DONT DO THIS IN PRODUCTION SERVER without being sure of what does this mean for that particular process !!) and unlock the queue from previous screen.
    5)Go to smq2 and execute F8. Then it should come as Nothing was Selected.
    If any queues are present then open a queue.if the status is SYS ERROR check the entries,right click on the status text and give save LUW.This brings queue to READY. .
    GoTo-> Qin Scheduler: check for the scheduler status to be inactive->Edit-> Activate Scheduler: status frm inactive to starting to wait.Now the queue will be RUNNING.U can see the entries in the queue moving.
    Now go to SMQ3, right click on the queue and give Restore LUW.
    6)this basically means tht message is waiting in the queue.
    in sxmb_moni go to queue Id column and double click on the entry .It will take u to SMQ2.Check the status of the queue
    If its SYSFAIL or STOP then double click on it and try to correct the error.After correcting the error send the message again.Also check whether the Queeu is Registred in transaction SMQR.
    7)Select your queue form the sxmb_moni, you will reacht he QRFC monitor.
    Here you will see some lock figures on the , Select on the 'Unlock Queues'. Activate your queues once again.
    This is if your data is correct and queue is stuck. You should only delete the queue if it has errored out due to incorrect data and you need to urgenetly process the rest of the data in the queue.
    If you drill down one step more than selct the error message and on the menu select edit-->Save LUW.
    thanq
    krishna

  • Time Series Objects for a Planning Area

    Hi all,
    Can anyone let me know why do we create Time Series Objects for a Planning Area.
    What is its Role & significance..
    Regards,.
    Vishal.S.Pandya

    time series is usually a Demand planning concept(and used in SNP as well but in SNP its predominantly the order series that plays a main role)
    time series is a general concept in statistics(and forecasting) wherein the value of a key figure is represented in a time bucket
    Time series gives you an idea of the gradual change in the values by time and the relation of the future based on the past
    planning area in APO (and other tools) tries to represent this as a 2 dimensional model with time on the columns and key figures in the rows. the value that you load into the cells that are formed by the above are based on the characterisitic values you choose from your MPOS which is linked to the way the values are stored in the planning  area
    The planning area stores data for each key figure in the smallest unit of time(technical storage buckets) and the lowest level of characterisitc value combination

  • Error using PlanType3 only in Planning ver. 11.1.1.3

    Hi, we are implementing Planning ver. 11.1.1.3 and are using all 3 of our PlanTypes. We have accounts which we only want to use with PlanType3, however we are receiving an error when choosing only this PlanType when creating/modifying the account. This occurs sporadically as we have added accounts using only this PlanType, but now we cannot modify these accounts or add any new Accounts to PlanType3 (unless we also check PlanType1 too). This seems to be a bug. Is anyone aware of this bug and how to resolve or provide a workaround? Your thoughts/comments are greatly appreciated.
    Thanks,
    Drew

    If you are sure that the pattern and the way search you are doing is correct and have tried and tested with other members also  .. then this could be a bug .. check with 11.2.5.200

  • Many PCs fail -- object is locked by user BWremote

    Hi friends,
      Today many of Process chains failed at process load IP with the following error:object is locked by user BWremote.  repeat is done and chains are okie now .. i want to knw  wht this error occurs and possible precautions not to occur these error again..
    plz guide me .
    Pavan

    Hi,
    If you are trying to load the data into the ODS or the master data objects then it is possible that you are simulataneoulsy two loads in the same target and it is only possible in the case of the cubes and not with master data and the ODS data as it you cannot load one request if one activation is going on.
    Also it could be becasue you will be trying to load the data at the same time of the attribute change run is running.
    When an attribute change run is happening you will not be able to laod the data in targets.
    This could be the reasons.
    Thanks
    Thanks

  • Snap object to ground plane not showing in 3D menu

    I seem to be missing the "Snap Object To Ground Plane" menu item in the 3D menu.  This recently happened and I don't know how to get it back.  Any help would be appreciated.

    Actually, I never noticed that. But it's not the one I am looking for, since it's not drawing shadows on the plane.
    Here is where I am talking about, in the 3D window:
    Perhaps I am missing something else, since you were able to show me that which I never saw before. Thank you.

  • How to delete unreleased transport request where the objects are locked

    Hi Experts,
      I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

    Hi,
    First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
    Than go to se10 and delete what you want.
    I hope it helps.
    Bulent

Maybe you are looking for