Object link DMS -- MM

Hello
I created object link to MM:
- Object EKPO Purchase Order screen 0248 until here it´s ok.
I need create more object link in MM, for example:
- Quotation EBAN
- Contract EKPO
- Purchase Request EKPO
In true I created this objects links, but in DMS when I try acess Quotation (transaction code ME48) or Contract (ME33K) or Purchase Request (ME23N) in object link...anything happens. In MM when I try to do this it´s ok...I access correct document in DMS.
Regards

Hi Amaresh
In last week I did this: EBAN maintain screen number 247 in "Maintain view for screens to DMS object links" .....it´s ok.
But I need in the same doc DMS various links:
- Quotation  (T-code ME48)
- Purchase Request (T-code ME23N)
- Contract (T-code ME33K)
- Purchase Order (T-code ME53N)
Example:
For Doc DMS number 1000000004 when I access tab object links I need:
Quotation 6000000058
Purchase Request 10000924
Contract 4600000106
Purchase Order 4500000913
In tab object links one click in 6000000058 I´d like view this Quotation in transaction ME48
In tab object links one click in 10000924 I´d like view this Purchase Request  in transaction ME23N
In tab object links one click in 4600000106 I´d like view this Contract in transaction ME33K
In tab object links one click in 4500000913 I´d like view this Purchase Order in transaction ME53N
But it´s work correct only Purchase Order....in another cases anything happens.
Regards
Fernando

Similar Messages

  • Creation of new object link for DMS

    i have searched a lot  about Creation of new object link for DMS on internet .
    and all replies  focus on that documentation :
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    i need  to know how to implement that  in more detailed step by step
    as  i know DMS and  abap also.

    Hi Reda,
    Hope the below URL will help to understand how the Process of adding a object link works.
    Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
    Thanks & Regards,
    Seshadri.

  • Object Link to DMS document - does not allow to link to docs not released

    Hi Folks,
    I am trying to create an object link from cProjects 4.5 to a DMS document. When I select a document in DMS I am getting the message "26 223 Document <doc_number> has not been released". If I set the status of the DMS document to a released status I am allowed to create the object link.
    My question is - why am I only allowed to object link to released DMS documents? I want link to a DMS document regardless of the status.
    Thanks,
    Lashan

    Hi Lashan,
    Not sure whether this works, but do check in CFC01 and see "Document Type Dependent Data'
    Regards,
    Aby

  • To add new object link in DMS

    Hi Sir/Madam,
    Currently we are implementing DMS(Document Management System) and
    our main requirement is to add document to the delivery and billing
    document.In t-code dc10 in "define object link" lips and vbrp object is
    not present in the default list so how we can add these new object in
    order to attach new document to delivery as well as billing document.
    Is it possible to attach document at header level because we have to
    attach lorry number at delivery header which will be common for all the
    items.
    The function module object_check_lips already exist in se37 but we
    have to create new function module for object vbrp.How to create this
    function module? How we have to create screens for these objects? If we
    have to create it by copying some function module like
    object_check_equithan what will be the funtion group.
    IN delivery document (vl03n) in menu bar in "extras" document
    option is not there than how we will see the attached document, do we
    have to create this option with help of abaper or this option will
    automatically reflect after all the cofiguration?
    Thanks and Regards
    Abhilash Nayak

    Hi Abhilash,
    You need to gofor z-development for this. The Abap'r will add the new required object in object link field. Also the DMS screen will appear in the required t-code.
    Meantime you need to add this object in SPRO , "maintain key fields".
    I hope this will resolve the query.
    Regards,
    Ravindra

  • DMS Object Link at Maintenence Order and Service order level

    Hi SAP Gurus,
    We had a requirement for maintaining DMS Object at Service order and maintenence order level, as Standard DMS does not provide any Standard Object link at Order level, we went for development and following the Standard procedure i could bring the Order Tab in CV01N Object Links, and also i could search the relavent maintenence order and maintain documents relevant to it,
    But the biggest problem now is i could not create DIR from the Maintenence or service order screen IW31, and the document i have placed at the order is not visible in the order screen at all,
    i know it is some sort of enhancement in the Order screen to allow DMS Documents to appear in the Order screen to provide this funtionality.
    let me pls know what exactly has to be done, as there is no config at the order level to get the DMS Screen, as DMS is not a standard object at the order level.
    one approch as suggested is modifiying the Order screen or using Screen Exit Enhancement for Order but not sure which one to use or how to move ahead,
    Thanks n Regards
    Priya S

    Dear Christoph Hopf
    Many Thanks for your answer,
    i went through the said SAP Note, but it only speaks about the notifications level, where SAP itself has provided the standard DMS Object links, and iam in latest ECC-6 version where this note  is taken care of i think,
    iam looking for creating DMS Document (DIR) from the maintenence Order IW31 transaction screen, and have developed new Object link for Maintenence order,
    but the main problem is, iam not able to create DIR from the IW31 Screen directly as Maintennce order is not a standard SAP Object,
    please let me know how to get the list of documents that i have attached to a maintenence order to appear in the IW32 maintenence order screen, and also we need to create the documents (DIR) directly from IW31 / 32 screens.
    Thanks and Regards,
    PriyaS
    Edited by: Priya S on Aug 19, 2009 1:50 AM
    Edited by: Priya S on Aug 20, 2009 1:54 AM
    Edited by: Priya S on Aug 24, 2009 6:24 PM

  • DMS object link to MIGO tcode - attach to GRN

    Hi,
    Our scenario requires us to link documents with specific GRN number via MIGO tcode. This is a non-std object and the logic
    1.Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN.......
    is not helpful at all and incomplete.
    Could anyone please let know what needs to be done from GRN object side to enable documents to be attacvhed.
    Archivelink is not an option because several documents need to follow life ctycle and versioninG.

    Hello,
    It is a two step process:
    1. Screen activation in SAP DMS
    2. Screen activation in SAP Object
    Please follow below steps:
    1. Configuration of screens as per SAP suggestion & Maintenance of Standard Structure MCDOKOB
    Material document number filed MBLNR need to be included in the standard structure.
    2. For t code MIGO, following function module needs to be maintained - OBJECT_CHECK_MSEG
    3. Maintenance Key Fields
    MSEG MIGO MBLNR MBN
    4. Maintain Object link
    MSEG Material Document Screen Number (enter the screen number which you have configured)
    Use the above created object link in your document type.
    5. Implementation of BADI - MB_MIGO_BADI, this is to activate the sceen of documents in MIGO
    I have not done this. So it is possible that i would have missed some step.
    But I am sure, it will help you a lot.
    Thanks & Regards,
    Mihir Popat

  • DMS-Object link to business partner (ISU-Module) required. Plz help.

    Hi all,
    I require to give an object link from DMS to Business partner of ISU module t code BP.
    So checked up in SPRO- Control data- maintain key feilds, & i found that BUT001 is the transparent table which is used here. so i inserted the same in object link for my document type, but there was no screen no defined to it so i gave the screen no as 500, the tab has appeared under the objectlink tab in DIR, but the screen is not appearing, it is blank, also in the business partner Transaction the DIR table is not appearing.
    What should i do? is there any other setting required, or the table which i have found is wrong. Plz help.
    Regards
    Tushar.

    Hi,
    Have you solved your issue? I want to have the same link. If you have please give me a step by step description.
    I saw the screen number for general business partner is 1249, maybe you can use this.
    Regards Camilla

  • DMS Object link for PRT Couldnot Display in CV02N

    Hi PLM DMS Gurus ,
    I have been investigating adding an object link for PRT which is CRVS_B screen 214. I have added this to the one document type. However, when I attempt to see the object link from the CV02N transaction, it does not appear to recognize the PRT assignment from the IA06 Change General Task List PRT Overview screen. Do any one have any idea of why this may be behaving in this way? Any feedback you can provide will be appreciated.
    When I add the Documents through transaction CF02/01 then it is showing in the CV02N transaction Object link , But if I attach the same Document# through IA06 then it is not showing it.
    steps to attach the document .
    1. Go to IA06 select a group
    2. Double click the task list and create an Operation
    3. Choose the Operation and click into the PRT button in the bottom of the screen.
    4 . Here you can find an option to attach your Document .
    5. Once you attach note down the document number and goto CV02N and see the object Link . You will not find that .
    I am doubted whether I am using the right screen number or not (CRVS_B screen 214) . Do we have any other way or anyother program & screen to show the Object link to the PRT created through IA06 .
    How do we find the program and screen which is not listed in the developement class CV ?.
    Any Inputs are highly appreciable and rewardable.
    Thanks & regards,
    Ramesh babu .P

    What you do in IA06 is using a document as an PRT. This is not the same as a objectlink between a PRT and a document. Thats why you dont see the use of the document in a tasklist in CV02n.
    Regards,
    Robert

  • DMS object links to SRM

    Hi,
    You can used this method to create object links between DMS different ECC objects (See below) Is there anybody who can tell me if you can use the same method to create object links between DMS and SRM objects? It should be very helpful for me.
    Thanks in advance
    //Håkan
    Adding Other Objects
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard
    SAP System.
    Prerequisites
    In Customizing for the Do
    cument Management ,SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
    Process
    Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    Create the function moduleOBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see:
    Object Links).

    Hey Manghes,
    The business scenarie is that poeple working in only SRM not in ECC system at all and they want easyly reach or link some document in DMS to SRM objects by using object links.
    BR
    //Håkan

  • Easy DMS  - problem with  object linking (unicode client)

    Hi Gurus,
    I have a problem concerning linking a materialmaster to a DIR in a uniciode environment. I tested following scenarios:
    1) Easy DMS 6.00 SP10 non unicode  +  non unicode Backend  -->  no problem
    2) Easy DMS 6.00 SP10 non unicode  +  unicode Backend        -->  no problem
    3) Easy DMS 6.00 SP10 unicode        +  non unicode Backend  -->  no problem
    4) Easy DMS 6.00 SP10 unicode        +  unicode Backend         --> problem
    Following Problem appears in scenario 4:
    Our Material Number Format is ______-____-___ (6 digits - 4 digits - 3 digits), "Lexicographical" is disabled, "Leading Zeros" is enabled.
    When I type in material number "111111-2222-333" and press "check all objects and read description" Easy DMS reads the description for
    111111-2222-333 but after that easy dms changes 111111-2222-333 to 000001-1111-122 and when I try to save the DIR it tells me that 
    000001-1111-122 is not a valid material master.
    As I mentioned this only appears with the unicode client + unicode backend. Any Ideas?

    Hi David,
    please tell us which version of EasyDMS you use currently. If you do not use EasyDMS 6.00 SP10 I would kindly ask you to see SAP note 1105699 and download this SP from the Service Marketplace.
    Further please check if you have maintained the object link customizing correclty in your backend system. Therefore please see the information in the SDN WIKI area for DMS under https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/ca-dms-Object+link
    Best regards,
    Christoph
    P.S.: Please reward points for useful information.

  • DMS- Object links (attached Purchase Orders) not opening

    Dear all,
    I have attached some PO's in Object link of DMS document.When I go with cv03n transaction.....Those PO's were not coming to display from the DMS......Please suggest any config is missing?
    thanks............

    hello srinivas,
    Maintain T code me23n infront of EKKO in maintain key fields setting in DMS control data
    Regards
    sham

  • DMS-Search via object Links

    Hi Experts,
    I am new to the DMS Module and have some queries- I have attached a DIR to a PR and PO and in CV04N, while I am doing search with object links,either when one value is correct , the DIR is showing,(like an OR Gate). i.e when PR is correct and PO is wrong, it is showing the DIR or when PO is correct and PR is wrong, it is still showing the DIR. So, is this a standard feature or is there any configuration change I need to do?
    Thanks in Advance

    Hi Aravind,
    step-1 create doc.type for PO in DC10 (IMG tcode)
    step-2 select doc.type,click left side define object link,here you have to assign the PO table EKPO.
    step-3.for more information check below notes.
    Note 880077: Performance problem using object links
    Note 885977: Extension to note 867241 on object links
    Note 926060: Extension of note 885977 for object link Purchase Order
    Note 960202: Object Links Deleted While Adding New Objects
    Note 1002648: Wrong behavior while using RFC_CHANGE_DOCUMENT_MASTER.
    Regards,
    M.Arunkumar
    SAP PLM Functional consultant.

  • Easy DMS and object links

    Hi
    I have added cProjects object links from DMS. It works fine if I create an object link from cProjects, but if I add an object link from DMS there is no link created in cProjects. Ideas anyone??
    Regards Camilla

    Hi Camilla,
    Regarding your description I would kindly ask you to check your
    object link settings.
    To grant that allways the currenct screens and authorizations were
    called please maintain also the value "1" into the "Authorization"
    column. For further informations on this maintainance please see the
    attached note 375452. It's important that you not enter the mentioned
    screen number wihtout the leading "1" as this number is added
    automatically by the system (e.g. object MARA 1201 maintain like MARA
    201). You can do this in customizing under:
    Transaction SPRO
    > Cross-Application-Component
        > Document Management
             > Control Data
                 > Define screen for object links
    If you need the dynpro number or object you will find all standard SAP
    objects and their screen number in function module CV130 (Screens) by
    transaction SE80. Please maintain all necessary SAP objects.
    Best regards,
    Christoph

  • DMS Object Link for SRM

    Dear All,
    Can you please provide me the object link for SRM( Inbound Delivery).
    Our team requirenment we should need to integrate with SRM through DMS (object link)
    So provide me the solution?
    Thanks
    Edited by: RS on Aug 26, 2010 1:14 PM

    Hi RS,
    Kindly follow following steps. Add the new object in DMS object link and DMS screen on new object screen with help of Abap'r.
    This can be achived with help of Abap'r and following steps:
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
    Prerequisites
    In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
    Process
    1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    Regards,
    Ravindra

  • Easy DMS - object linking DIRs

    Hi,
    I'm implementing Easy DMS currently running version v6.0 SP9. Everything is working well with SAP DMS except for one thing, object linking.
    I've read other threads but no help.
    My issue is I want to be able to show a DIRs relationship with other DIRs in the object links.
    Easy DMS allows this to a certain extent but its useless because all it does is display the related DIRs for this DIR, you cant action anything to display these other DIRs, where as if you do the same thing in SAP DMS, you can actually get a link to the referenced DIRs and when you click on it, it  will automatically navigate you to the related DIR.
    Why doesn't this work in EASY, or is simply just there for show, which I find a waste of time to be honest if object links are simply for show. The same goes if I want to attach a DIR to a material same problem.
    Thanks in advance
    Kurt

    hello Kurt,
    to my knowledge,Navigation to a different dir which is attached as object link in easyDMS is not possible (like in SAP GUI).
    regards,
    anubhav

Maybe you are looking for

  • If I create a new itunes account?

    If I create a new itunes account will it erase my existing information such as my purchased music history? This is a problem my father is having, When he started his itunes account a few years ago he made up an email account to initiate the account a

  • Pass table name as parameter PLS-00357

    create or replace PROCEDURE universal_p ( tab IN VARCHAR2, col IN VARCHAR2, whr IN VARCHAR2 := NULL) IS TYPE cv_type IS REF CURSOR; cv cv_type; val VARCHAR2(32767); BEGIN OPEN cv FOR 'SELECT ' || col || ' FROM ' || tab || ' WHERE ' || NVL (whr, '1 =

  • Using Oracle Forms

    Ok I'm a beginner at this! I plan to use Oracle to create a medical data base for patients. However, This is the most complicated database I've seen and the best. So, how do I use create form for use on my personal computer first before trying to use

  • Query for data

    Hi all, i am trying to write a query for a specific scenario using analytic functions. i have a table that has data in week basis. here is some sample data id date value 1 1/4/10 A 1 1/11/10 B 1 1/18/10 C 2 .... 2 .... each date represent the beginni

  • Short text during UD

    Hi All, Is there any feild where i can maintain short text during Usage decision whcih can be extracted from some table. I know the feature of Long text but for extracting the text ABAP is required.I want to avoid the same