Object Link for PO and PR

Hi Gurus,
I have an requirement to view DIR (Drawing) through PO (Purchase Order) and PR (Purchase Requistion) using object link.
When I go to the DIR screen I can view the following std objects for 1) Purchase Order Item for PO 2) Purchase Req Item for PR.
When I attach a PO & PR number and double click the same it takes me to the ME21 screen for PO creation and ME51 screen for PR creation eventhough it has been already created.
How can I view the DIR in ME23 and ME53?
Thanks,
Paddy

How can I view the DIR in ME23 and ME53?
ME23 :
In menu tab
Select item
choose More Function
then Document
ME53 :
In Menu tab
Select Goto
Then Linked document

Similar Messages

PS roles for making object links between cProjects and PS

Hello to everybody!
Does anybody could give me a favour and tell which role I should grant to the user in order to allow him make object links between cprojects and PS elements from cProjects. I have already granted authorization to CJ01, CJ02, CJ03 and CJ20N transactions, but JA 027 == No authorization for action Display === error message still occurs. SU53 shows that everything is OK.
Thank you.

Hi,
I´ve the same problem, I´m in tx CJ20N but I don´t know how to add my user in Access Control List (ACL) in CJ20N
Could you explain me how I can do that?
thnaks a lot and best regards, Sapera

Creation of new object link for DMS

i have searched a lot about Creation of new object link for DMS on internet .
and all replies focus on that documentation :
1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
i need to know how to implement that in more detailed step by step
as i know DMS and abap also.

Hi Reda,
Hope the below URL will help to understand how the Process of adding a object link works.
Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
Thanks & Regards,
Seshadri.

DMS Object link for PRT Couldnot Display in CV02N

Hi PLM DMS Gurus ,
I have been investigating adding an object link for PRT which is CRVS_B screen 214. I have added this to the one document type. However, when I attempt to see the object link from the CV02N transaction, it does not appear to recognize the PRT assignment from the IA06 Change General Task List PRT Overview screen. Do any one have any idea of why this may be behaving in this way? Any feedback you can provide will be appreciated.
When I add the Documents through transaction CF02/01 then it is showing in the CV02N transaction Object link , But if I attach the same Document# through IA06 then it is not showing it.
steps to attach the document .
1. Go to IA06 select a group
2. Double click the task list and create an Operation
3. Choose the Operation and click into the PRT button in the bottom of the screen.
4 . Here you can find an option to attach your Document .
5. Once you attach note down the document number and goto CV02N and see the object Link . You will not find that .
I am doubted whether I am using the right screen number or not (CRVS_B screen 214) . Do we have any other way or anyother program & screen to show the Object link to the PRT created through IA06 .
How do we find the program and screen which is not listed in the developement class CV ?.
Any Inputs are highly appreciable and rewardable.
Thanks & regards,
Ramesh babu .P

What you do in IA06 is using a document as an PRT. This is not the same as a objectlink between a PRT and a document. Thats why you dont see the use of the document in a tasklist in CV02n.
Regards,
Robert

DMS Object Link for SRM

Dear All,
Can you please provide me the object link for SRM( Inbound Delivery).
Our team requirenment we should need to integrate with SRM through DMS (object link)
So provide me the solution?
Thanks
Edited by: RS on Aug 26, 2010 1:14 PM

Hi RS,
Kindly follow following steps. Add the new object in DMS object link and DMS screen on new object screen with help of Abap'r.
This can be achived with help of Abap'r and following steps:
Purpose
You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
Prerequisites
In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
Process
1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
Result
After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
Regards,
Ravindra

By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator]. What is the name of the product? Where is the link for download and reinstall? Please help me r

By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator - never disclose publicly]. What is the name of the product? Where is the link for download and reinstall? Please help me rapidly, Best regards / Stefan

Sign in to your Adobe account online and look in the Plans/Products sections to see which program it might have been.

Link for MSEG and EBELN for Mvt 541.

HI,
Actually I need link to get the mataerial document numbers against Sub contract Po for mvt 541.
I need to develop a program to capture the material document nos against Subcontract PO and calucate reamain components against each po with respect to GR for that PO and line item.
Please provide link for MSEG and EBELN link for mvt 541.
Thanks
Venkat

Hi Venkat,
Check EKBE table. U will find Material doc no corresponding to the PO no.
Reagrds,
Amitava

Object link for PM order

Dear all
I want to add object link for PM order (Tcode-IW32) , It is not standard link. What is the process to create it?
Regards
Sandeep

Hi Sandeep,
take a look to this link:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/f8/8c423c1a7a7869e10000000a114084/frameset.htm
Best Regards,
Alfredo.

Adding New View Objects/Link on "Preview and Print" - Order Acknowledgement

Hi,
Can we add New View Objects/View Links for the existing "Preview and Print" Order Acknowledgement.
I want to add for the 2 new functionalities i.e., for Charges (from OE_PRICE_ADJUSTMENTS_V ) and the Line Level Notes, which is currently not supported by Oracle.
Can anyone help me on acheving this functionality?
Looking forward for your response.
Thanks in advance,
Regards,
Muru

You can do that. You should first create the new business objects(AM, VO, VL) in jdeveloper, create your new regions in jdeveloper, associate the AM to the top level region(stackLayout) you create. Use personalization and add a stack layout in the Preview and Print page, set the extends property to point to the new region which you had created. Donot forget to deploy all the files in middle tier before doing the personalization.
The AM which you had added to the stackLayout will automatically be nested with the root AM of the page during runtime.

Is there a limit on number of object links to DIR, and any impacts of this

Hello All,
Can you please let us know if there is any limit on the No of Object links to be maintained in the Object Link tab of DIR,
Our major Concern comes as there is One DIR logo / symbol, which is maintained in most of the Material Master around 1000s
and also the same DIR is used in all the Service and maintenance Notification as an Attachment, so the list of Object link in DIR Object link tab is going beyond control above 10000s,
i wanted to know if there is any limit on no of Object links to be maintained in DIR object links, and is there any impact on DMS functionality if the list is ever increasing,
( also can i know if there is any workaround that the DIR is only displayed going in to Material master or Notifications but the same is not listed in the DIR object links tab as here it is going on increasing,)
Thanks and kind regards
Kumar S

Hello Christoph and Every one,
Thanks for the responses given, and providing a hint not to have many Object links, as it could be an performance issue going to the DMS DIR Object link TAB,
But in this particular case we are not assigning the Objectlinks going by the DMS Object links TAB, but it is done in other way round, going by the Equipment or Notification Screens,
There are few Health and safety document ( Which is created as a DIR in DMS) which needs to be assigned in Most of the Equipment and the new notifications created, and this document DIR is assigned from the Equipment and notification Screen,
And we may not be interested to go to the DIR to browse and Assign the Object Links, so as we do not frequently go and check the DIR or Use DIR Object link TAB for Object Link assignment will it in any ways cause performance Issue here??
And also as asked earlier can we have a one way attachment like the DIR is Visible in the Equipment or Notification Screen, but the DIR is not adding up the Equipment or Notification details in its Object links TAB, (by development or it is totally illogical to ask for)
Thanks and Kind regards
S Kumar

Open link in object link for calling sap R/3 Transaction.

Hi all,
Can anyone help with the steps to be done in order to call an SAP Transaction in cProjects via services to Object Links. We succeeded to get the object links from R/3, we are able to see the 'open' link under 'Application' in the Object Link Tab for some of the object type like Routing, Inspection Plan .
1. But some of the Object Types like Documents from DMS Etc can be selected and linked but does not have any 'Open' link(blank).
2. But some of the object types are not searchable. (The search provided no results; Choose other search criteria ) Message is appearing even though we give the correct search criteria.
Pls guide me to solve the issue
Thank you,
Ramesh.

Hi Dev,
as this thread has been closed in the meantime (the original poster seemed to have found the solution by himself), I'd suggest you post your question as new one.
Or you check the material you can find at [service.sap.com] at the SAP Support Portal. E.g. Release & Upgrade Info > Installation & Upgrade Guides > SAP Business Suite Applications > SAP PLM using cProject Suite 4.5 > cProjects: Guide for Implementing Object Links
I think inside this document you can find all the information you need.
Best regards,
Thomas

Object Link for DMS

Hi Experts,
As per Client Requirement, I need to create an object link in CV01N for a non standard SAP object as mentioned in the list.
HR Module
Personnel Number
Position
Organization Unit
Personal area
FICO Module
Business Area
Cost Center
As i needed a step by step process to achive this.Sample codes (from ABAPer) with screen numbers will be more helpful.Please don't tell to look for help link/document bec'z i allready had those.
Pts will be awarded for useful answer ..be sure..
Thx in advance for reply..

Hi,
You can create New objects using the T.code: SE80.
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists.
Thank You,
Manoj
pls consider points if useful..!

Object Links for HR Person PA10

Hi DMS Experts
I want to link DMS Document to a Person in HR via PA10 where we can see data of Person in HR.
Also I need help in linking new object to DMS.If these object are not in standard Object link configuration in Define Docuemnt Types.
I have Following questions
1. how to identify that its a Object.
2. Whether it can be linked to DMS.
3. what are configuration and developements that are to be carried out.
I have gone through Img Help
Object links to other SAP objects
You can make an object link to SAP objects that are not shown in the
    possible entries list. To do this, proceed as follows:
o   In the standard system, there are already two special screens for
        the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
        You must create two new screens with the same number for the module
        pools SAPLCV130 and SAPLCV140 .
        The processing logic must follow that of screen 1204 in program
        SAPLVC130.
o   Create function module OBJECT_CHECK_XXXX (XXXX = object name)
-   If the object can be classified, this function module already
            exists .
-   Otherwise copy the function module for linking equipment
            DOCUMENT_CHECK_EQUI and change it as required for the new
This is little bit technical and I am not able to understand.
Kindly help me
With best regards
Mangesh Pande
Email Id [email protected]

Hi,
from my point of view the best way to manage these documents in the HR transaction PA10, PA20, PA30 instead linking documents to HR objects.
In the standard there is no suitable object for document-object links. Please see all the available SAP standard objects in SE80, function group CV130 under screens.
So you can go to PA30 and use the service for object button in the upper left corner. Here you can add business documents for each person.
Best regards,
Christoph

Who is determining object link for Contracts in SRM

Hi all
SAP Says
The determination of object relations takes a long time. This is indicated by the long runtime of the report "BBP_GET_STATUS_2", for example. If you use transaction SE30, for example, to view an ABAP trace, it displays a long runtime for "Perform BBP_PDH_OR_READ".
get status or clean rereq up?
who creates a object lingk for GOA contract? get status or clean reqreq up ?
muthu

yes jay. Are those links or reference ?
i think both are same.
object link means it connects both objects srm GOA and Purchasing Contract BO. it is reference too..
i think it is duty of clean req job .
for eg.
i have only GOA in SRM not other SRM business objects sc etc.
should i require get status jobs to be run ?
i use srm only for creating GOA.
i dont see any thing on my spool get status job for contract.
let me stop status job and see..i dont have access to cancel . but update u shortly.
br
muthu

How to create Object Links For non standard SAP Objects?

Hi all,
I need to create an object link in cvo1n for a non standard SAP object (inspection characteristics) . we have two ways to do this
1. Create a screen for the rquirement by taking the standard screens as reference.
2. Implement badi document_obj.
I need a step by step process to perform both the steps. Sample codes will be helpful.
One more thing is that i need a link in the standard screens of inspection characteristics also. How to get a two way link both in cv01n and in the standard inspection char screen.

hi
Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
Process
Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
also you can attach the document to PRT also. but it will not show you in dms. This type of attachment is only from otherside.
thanks
nitin
award point if useful

Object Link for PO and PR

Similar Messages

Maybe you are looking for