Object link not known in CO (Notification E IAOM 019)

Dear Experts
We are implementing In House repair scenario in CRM 7.0. I have created Repair Order with Sales and Service Items. Sales items are successfully replicated to ECC for logistics process. Two service items I have in repair order i.e Diagnosis and Repair (SRVP Item category) are copied to Service confirmation.
In the service confirmation, i entered 10 hours for each of these and mark the items as complete. When I save the service confirmation, I expect an Internal Order would be created in ECC to capture the cost.
Unfortunately, we are getting this error. I checked all the Forums, OSS notes, our config settings and debug the queue, but no clue. Please help if you have come across this situation before
Note: We are not using CATS integration. We want only controlling integration
Thanks

Hi
The is error is because internal order in ECC has not been created. Check if there is a Distribution Lock on the Header of the Service Order, if so release it and save.
You can check the if the internal order is created or not in ECC Tcode : K002..
Swapnil

Similar Messages

Services for object linked note to DMS DIR

dear sir,
we have created DIRs(cvo1n) and attached notes using Services For Object. The notes is visible in attachement list.Now we want to generate a report in which these notes should be available against respective DIRs.
we created a query using SQVI, linking tables DRAW,DRAT,TDWST,TSOTT and SOOD.
But this will show all the notes available in that language ( no link with DIRs)
we want to have the Notes which are attached to respective DIRs in report.
it may be possible if we link the table contains DIR and SOOD link table,which we don't know
can you suggest some method to get the details of Notes available in Services For Objects?
thanking you
srinivas pai

i am closing this thread

Maintain Screen for Object Link - New Object

Hi
We want to create new object link ( not standard SAP) in our company.
I try to add new screen for link other SAP object : SE80 ---> Package : CV --->
Function Group : CV130 , add new screen . It seems as REPAIR , Ask me for access key .
Is it OK?
Help Activities:
f the screen entry contains errors or you want to add a new entry you
an check the existing screen sas follows:
   Start a second mode and execute the following steps:
   -   Start the Object Navigator.
   -   Display the objects for development class CV
   -   Expand the function group 130
       The structure notes screens lists all screens that can be used
       for an object link
   -   Find the screen for the object link (such as 1201 for material
       link).
   Process the activity Maintain screen for object link in the first
   mode.
   -   Correct the entry or add an entry for the the object you want to
       add to the document link.
Thanks, Meira.

Hi Dave,
First of all you didn't mention which version you are using and Which Real Estate you are on. there are 2 RE
1. Classic Real Estate (Real Estate)
2. Flexible Real Estate Management
Now coming to Question
for Flexible Real Estate Mangement the path is
SPRO---->Flexible Real Estate Mangement (RE-FLX) -
>General Setting for Master and contract -
>
Document Mangement -
>Document Mangement System -
>Maintain Screen for Object Link
The above path is for ECC 6.0
Thanks
Veman.

DMS-Search via object Links

Hi Experts,
I am new to the DMS Module and have some queries- I have attached a DIR to a PR and PO and in CV04N, while I am doing search with object links,either when one value is correct , the DIR is showing,(like an OR Gate). i.e when PR is correct and PO is wrong, it is showing the DIR or when PO is correct and PR is wrong, it is still showing the DIR. So, is this a standard feature or is there any configuration change I need to do?
Thanks in Advance

Hi Aravind,
step-1 create doc.type for PO in DC10 (IMG tcode)
step-2 select doc.type,click left side define object link,here you have to assign the PO table EKPO.
step-3.for more information check below notes.
Note 880077: Performance problem using object links
Note 885977: Extension to note 867241 on object links
Note 926060: Extension of note 885977 for object link Purchase Order
Note 960202: Object Links Deleted While Adding New Objects
Note 1002648: Wrong behavior while using RFC_CHANGE_DOCUMENT_MASTER.
Regards,
M.Arunkumar
SAP PLM Functional consultant.

Inserting Object link as reference object in Maint Order/Notification

Dear all,
I've mapped pipe line using obejct link,now when i create Maint Order or Notification system displays below mentioned message,
Select a link object as reference object
Message no. IH101
Diagnosis
You are trying to create an order or a notification for a link object, but have not yet selected an object.
Procedure
Place the cursor on a link object. This object will be entered in the notification or order as the object referred to.
In std Screen RefObject thers is no ref object for Link,
Please guide me how we can create Maint.Order/Notification against Object Link,as it is required to track cost as well as history of repairs in pipe line.
Thanks in advance
Regards
Parshil
Edited by: PM_in_SAP on Jul 27, 2010 9:19 AM

Hi,
i refer page no 18 of SAP book Object Networking (CS-BD/PM-EQM-ON) SAP AG Release 4.6C,
To select a particular link from the list, (IN18)select the object link and choose one of the following options:
Goto --> Change/Display --> link, You reach the object link data screen.
Goto -->Create notification --> Notification type
You reach the screen where you can create a maintenance notification for the link. If a link object is entered for the selected link, the system automatically uses it as a reference object for the notification.
Goto --> Create order
You reach the screen where you can create a maintenance order for the link. If a link the system automatically uses it as a
reference object for the order.
Regards
Parshil
Edited by: PM_in_SAP on Jul 27, 2010 11:22 AM

OLE objects linked to MS Word/MS Excel do not update in InfoView

I am facing the following problem:
- Embedded a Word document as linked OLE object into a crystal report and stored it to Enterprise repository.
- When opening the report with CR Developer from my workstation, links are updated and changes made in the .doc file are reflected, the report is updated
- However when displaying and refreshing the report in InfoView changes aren't reflected.
The OLE link (type document) is set to update automatically. I tried to store the report to the enterprise repository with and without data. Yet no difference - no update in either case. Neither scheduling nor opening and refreshing the report in InfoView helps.
I further inserted an OLE object linked to a bmp image, and for the image refreshing works, even in InfoView
So am I doing something wrong?
Some threads in this forum indicate that only OLE linked pictures (bmp, jpg) can be refreshed dynamically, e.g.
[Dynamically change path to OLE file]
Others indicate that it is also possible to dynamically refresh OLE objects linked to .doc, e.g.
[Re: Link to Word document doesn't refresh when running from Infoview]
- Is it at all possible to dynamically display the contents of .doc or .xls files in a CR when viewing and refreshing the report in InfoView (without the need to reopen and resave the report with CR Developer first) ?
- We are using BOE XI3.1 SP3 and Crystal Reports 2008 SP3. On the BOE server Crystal Reports Developer is not installed. Can this be a prerequisite for the OLE links to update in InfoView?
- Any other suggestions?
Thanks
Konrad

Hi Don,
Thank you for the quick reply.
- You say that this works in CR Designer. That's right. As described above, even I can open the report with CR Designer and the links are getting updated.
- However if I do not reopen and resave the report with Designer ... if I just open and refresh the report in InfoView to get the updated information from the files ... changes are not shown. I face this problem ONLY with ole links to .doc and .exe. OLE links to image formats such as .bmp do work. WHY?
My files are already stored locally to the BO server and the (changed) image files are read and updated from exactly this directory. But not the linked Excel and Word files...
Thanks
Konrad
Edited by: Konrad Hartl on Jan 25, 2011 8:04 PM

Transfer Billing document to accounting, Error: 'Object not known in COu2019

Hi all,
I have created an acquisition contract and subsequently created a billing document in CRM but when I try and transfer this to accounting, the system displays error message IAOM028 u2013 u2018Object not known in COu2019. My account assignment category on the contract is EROBJ u2013Profitability Segment CO-PA, however I have tried creating acquisition contracts with other account assignments but the same error occurs, even though the controlling object exists in SAP ERP. Iu2019ve searched the SAP notes and I did see note 683886, but this affected release 4 and we are working with release 7. Any help or advice in resolving this error would be much appreciated.
Alternatively how do I mark the item category as not relevant to CO? For now itu2019s not imperative that I post to a controlling object? The SAP help portal refers to selecting (or in my case deselecting) the Service setting in the Assign BW/CO fieldu2019 but I canu2019t find this field on the item category. Any advice again would be greatly appreciated.
Many Thanks
Lee

Hello,
The reason might be the transfer error, is due to the incomplete distribution of the order/contract to R/3 account assignment table IAOM_EXT_OBJ_INF.
For your invoice, check entry for document number/item number. It might be missing and if so, system shows error message as you mentioned.
If entries are missing, then the order/contracts need to be re-distributed to R/3, so that the entries are created for these missing items in the IAOM tables. The transfer process then will complete missing entries successfully.
To re-distribute to R/3, the respective document needs to be save after making a change in the document. Unless there is a change in the document, the re-distribution will not happen.
I hope this information may helpful to solve your issue.
Regards,
Harshad Patel.
Edited by: Harshad Patel on Jan 27, 2012 8:20 AM

Object Link to DMS document - does not allow to link to docs not released

Hi Folks,
I am trying to create an object link from cProjects 4.5 to a DMS document. When I select a document in DMS I am getting the message "26 223 Document <doc_number> has not been released". If I set the status of the DMS document to a released status I am allowed to create the object link.
My question is - why am I only allowed to object link to released DMS documents? I want link to a DMS document regardless of the status.
Thanks,
Lashan

Hi Lashan,
Not sure whether this works, but do check in CFC01 and see "Document Type Dependent Data'
Regards,
Aby

Object link is not created for batch through BAPI_DOCUMENT_CREATE2

Hi ,
I am trying to create document for batch object through program using bapi BAPI_DOCUMENT_CREATE2.
In transaction CV01N while creating document there is a provision to to link your material with Batch. I am able to create it through CV01N. But, While creating through program I am not able to create the object link. I am able to create link for material,vendor,PO.. but not for BATCH objects. The table where link objects values to be passed is OBJECTLINKS.
I have tried all possible combination but unable to create a batch object link to a material through BAPI_DOCUMENT_CREATE2.
Thanks,
Sandeep

Hi,
Please explain detailly about FM BAPI_DOCUMENT_CREATE2
Thanks
Madhavi

Object not known in CO (IAOM 028)

Hi,
I'm facing a problem with the Settlement Type Prepayment in SAP CRM 2007.
Here you can find the error message:
Object not known in CO (IAOM 028):
"You want to post to the object with technical key belonging to the business scenario . However, there is no Controlling object assigned to this object"
I've read from some forums that BAdIs can be implemented in order to avoid this control, but my question is: without implementing BAdIs, where can I assign the missing Controlling Object?
In CRM? In ECC?
Thanks in advance,
Andrea Ricci

Hi Chandra,
I've the same problem. I've checked the notes and all the settings provided in them are correctly set up in my CRM system.
Can you suggest another kind of solution?
Points if helps,
thanks a lot,
regards,
A.

Authorisation object F_T011 not linked correctly to authorization

Hello Everybody,
I get an authorisation problem, I hope to be in the correct forum.
I am about to adapt some rules for Fi user. When using transaction code S_ALR_87012284, I get an error message about a missing authorisation.
After running SU53, I see that the object F_T011, with the activity 03 and the statement version I required are missing.
In PFCG, I added manually in my rule these missing authorisation. I generated the rule but the problem is still happening. In debug mode I see effectively that the "authority-check" on this authorisation object F_T011 is missing.
In looking in PFCG, I see that my authorisation object F-T011 was added to the authorisation T-BT19013100. But if I run SUIM to see the authorisation object presents in the authorisation T-BT19013100, I see all the other object but not object F_T011.
It seems that a link or something like that is missing between the authorisation and the authorisation object.
Does someone have an idea ?
If someone want more details or screenshots of PFCG or SUIM to better see what I explained, don't hesitate to answer.
Thanks in advance,
Regards
Céline JOMARD

I find the solution : It seems that I needed to regenerate after transport the rule in the other client.

DMS- Object links (attached Purchase Orders) not opening

Dear all,
I have attached some PO's in Object link of DMS document.When I go with cv03n transaction.....Those PO's were not coming to display from the DMS......Please suggest any config is missing?
thanks............

hello srinivas,
Maintain T code me23n infront of EKKO in maintain key fields setting in DMS control data
Regards
sham

Note oss 994326 - IAOM 028 Object not known in CO

Hi,
i would use note 994326 - IAOM 028 Object not known in CO
to clear the field EXT_OBJECT_ID, but the changing parameter C_GL_ACCOUNT is the field (type BILL_ACC_ACGL09-GL_ACCOUNT )e not the structure (type BILL_ACC_ACGL09).
Can any one help me about the modify badi?
Thanks
Raffaella

Hi Chandra,
I've the same problem. I've checked the notes and all the settings provided in them are correctly set up in my CRM system.
Can you suggest another kind of solution?
Points if helps,
thanks a lot,
regards,
A.

404 Page not Found (Object Links)

I am trying to get object links working in EP 6.0 SP11 I have read all the previous postings and tried applying the ones that were applicable. I have assigned the servicemanager role on both the portal and crm side. Here is the link that is generated when I try to open a business partner:
http://portalserver:50000/roles/com.sap.pct.crm.ServiceManager/AccountsProducts/nf/nf_2/MaintainAccounts?DynamicParameter=CRM_OBJECT_TYPE%3DACCOUNTCRM%26CRM_BOR_TYPE%3DBUS1006%26CRM_OBJECT_ID%3D0000000032%26CRM_LOGSYS%3DCR2CLNT400%26sap-syscmd%3Dnocookie
I think the first part of the link is wrong from "http://portalserver:50000/roles/com.sap.pct.crm.ServiceManager/AccountsProducts/nf/nf_2/MaintainAccounts"
Can anyone shed some light on what the correct link should be? Should there be a /irj/portal after the port? Should there possible be another directory between the port and "/roles"?
I guess my main question is, if I wanted to create a direct link to this MaintainsAccounts iview, how do I figure out the direct URL to it?
Appreciate any help and will reward points...
Thanks

Hi,
The link should be server:50000/irj/portal?NavigationTarget=/roles/com.sap.pct.crm.ServiceManager/....
This issue is resolved by changing helperservice.par in SP9.As I mentioned in my previous posts,I am not sure it's resolved in SP11 or not. You can upgrade to latest version of portal or compare the helperservice.par in oyur system.
Regards,
Abdul raheem S

Linked Objects - Cell Note

Is there a way to print the linked objects - cell note on a report? Or is there a way to use excel spreadsheet toolkit to update "linked objects - cell note" if a user keys in the information in cell in Excel?Need a hard copy report of Linked object cell notes as well as having the linked objects in a cell note for use with analyzer. Thanks.

looks like you're ready to jump into the API feet first.Your license must include the api option to program any api commands. This shows up in your app manager under server info.If you don't have the api you're out of luck.The api calls that would be helpful are:EsbLroGetCatalogEsbLroGetObjectEsbLroListObjectsThese are documented in your html help under:\hyperion\essbase\docs\api\api_vb\mavb\funcs\[email protected]

Object link not known in CO (Notification E IAOM 019)

Similar Messages

Maybe you are looking for