Object link with RFQ

Hi
How can we Object link with Request for Quotation (RFQ)?
Regards

hi,
YES,
you could use object link in DMS, CV01n, Basic data screen, select request for quatation, and add your RFQ Number.
save the entry.
note: prereqisite is u have to configure this object in DC10. object is 'EBAN' in define Object links.
Benkaraja
??P

Similar Messages

Object link for RFQ

Hi all,
How can we add Object link with Request for Quotation (RFQ)? actually both EBAN and EKPO are already used for other Objects like PR and PO. Apart from this how to select the screen number. Can i use EKKO? Please guide with procedural steps.
Thanks,
Venu.

Hi Venu,
Kindly follow following steps and revert back:
Hi Mangesh,
This can be achived with help of Abap'r and following steps:
Purpose
You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
Prerequisites
In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
Process
1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
Result
After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
Regards,
Ravindra

DMS Object Linking with Appropriation Request (Ecc6.0)

Dear All,
ECC 6.0(ERP 2005)
<b>Steps:-</b> (Error in Object Link for Appropriation Request)
I am opening DIR in change mode
going to object links TAB
attaching object link for appropriation request
saving the DIR
Re-opening the same DIR with Appropriation Req. Object link
going to object link TAB
double clicking the attached object for Appropriation Req.
<b>Error****this does take me to maintained TCODE IMA11 for Appropriation Req. "but it does not display specific attached object"</b>
I mean it is not displaying attached object (Appropriation req.,Variant) it just take me to initial screen of IMA11....
IF any one knows possible solution pls. reply
Regards,
Tushar Dave

Hi Dave,
please change the transaction from IMA11to IMA3 and see if the request is now
displayed. In transaction SPRO under
Cross-Application Components
-> Document Management
   -> Control Data
       -> Maintain Key Fields
the entry for object IMAV should look like this:
IMAV     IMA3     POSNR1
I hope this information will help you.
Best regards,
Christoph

Object link with final status only

Hi
We have following scenario:
- We want to link the PR with document but only when the document is processed through approval procedule and once it reaches to final status then only object linking shall be possible... I want to prevent the object link in other status for the same document.
How can we achieve this?
Regards
Yogesh

Hi Yogesh,
I think that an implementation of a DMS BADI could help here to filter the object links and display only those documents which are in the final status. For this action you can use the following BADIs I think:
- BADI_DOCUMENT_OBJ: This one controls the behavior from DMS side
- BADI_DOCUMENT_OBJ1: This one handles the behavior from object side
I hope this information could be useful for you.
Best regards,
Christoph

Object link with finanace Documents (Vendor Invoice) Tcode FB03

Hi all,
Can DMS object link be maintained with finance documents for ex Vendor Invoice?
Tcode FB03.
Thanks
Ansih

Hi,
you can link documents to purchase order item or purchase requisition then obviously this will be displayed in vendor invoice.
Best practice is to use SAP DMS standard functions. Don't go to link with vendor invoice.Anyhow MIRO and MIGO transaction are
depeandent on purchase requisition.I hope this will resolve your query and is a best practice.
Regards,
Ravindra

Document Object Linking with Material

Dear All,
I have a small query regaridng the object linking between document and material. Whenever i create part in CAD system, i am creating a document and material for the part in the SAP PLM system using the CAD Interface. Then if i log onto the SAP PLM system under document i am able to see the linked material in object links. Where as i am not able to see the document link in the material basic data screen.
Where can i found the document linkage information for the material in material master screens.
regards,
rajesh.

Hi Rajesh,
in transactions MM02 and MM03 you have to go to the "Additional Data" Screen. Please use the button and then switch to the "Document Data" tab. Here you should be able to see the linked document info record.
Best regards,
Christoph
P.S.: Please reward points for usefull informations.

Object link with HR master

Dear All,
Is it possible to object link HR master to DMS? If yes Plz explain me steps.I have requirement of attaching all employee related documents to that employe HR master.If this is not possible through object link, then plz let me know other possible ways.
Regards
Sham

You use ArchiveLink not DMS in HR. Big difference between the two is ArchiveLink does not allow for versioning.
Archivelink allows you to store documents against infotypes in HR and the authorisations follow those infotypes.
Tcodes to look at are OAC0 (content server for storage), OAC2 (doc type config), OAD5 (config doc type against HR object in SAP). The documents are stored used OAWD. You can find the documents by using OAOR or selecting the menu path EXRAS - Display Facsimile (for all documents) or Display Specific Facsimiles for documents related to that specific infotype.

HR object link with DMS

Hi, Devoloper,
I have one requriement, \Client asks to link employee Photo, testominals, corporate Training reports etc to DMS. explain
rgds
Ben

Hi,
Employees all necessary documents can be linked directly to the personnel number in HR objects itseif.
If you want to see it, pls go to Tcode PA30 and look for services for object on the top left side / goto create / create attachment and link the file you wanted (testominals, corporate Training reports).
You can view the same file in services for object / attachment list.
Attaching a photo can be addressed in HR itself....FYI
hope this answers your query.
regards,
Santhosh

Object Link Error.

Dear All,
We are facing an issue regarding object link of document we maintained one object link (Standard One) we are testing in two different languages. I can able to see the link in Language English same time i am unable to see the same link in other language. Please post your valuable queries in this regard.
Regards,
Bhanu.

Hi Bhanu,
In SPRO ..in "Document type" config you have to define the object link with description in both languages which you want.
When you login in SAP with different language you will be able to see the object link with that lnaguage only which you have maintained in config.
Thanks
Pravin

Link with SAP objects documents already stored in Docuemntum

Hi all,
I am working in the configuration of archivelink between SAP RE-FX and Documentum with Object Type BUS1503.
I am able to store documents from SAPGUI in Documentum but now I would like to do the other way around. It means, documents already stored in Documentum I want to link them to this object Type to been able to display them from SAP-GUI. Where can I find documentation about this? I ahve been checking but I can not find anything.
I have no access to Documentum itself so it is quite difficult for me to check this other way around.
Thanks
Diana

Hi Diana,
Chekc whether object links available in documentum or not? I am quite doubtful about the feathure.
If not then access from SAP GUI and link to this object as you don't have access to documentum.
I hope this can help better.
BR,
Ravindra

Easy DMS - problem with object linking (unicode client)

Hi Gurus,
I have a problem concerning linking a materialmaster to a DIR in a uniciode environment. I tested following scenarios:
1) Easy DMS 6.00 SP10 non unicode + non unicode Backend --> no problem
2) Easy DMS 6.00 SP10 non unicode + unicode Backend        --> no problem
3) Easy DMS 6.00 SP10 unicode        + non unicode Backend --> no problem
4) Easy DMS 6.00 SP10 unicode        + unicode Backend         --> problem
Following Problem appears in scenario 4:
Our Material Number Format is ______-____-___ (6 digits - 4 digits - 3 digits), "Lexicographical" is disabled, "Leading Zeros" is enabled.
When I type in material number "111111-2222-333" and press "check all objects and read description" Easy DMS reads the description for
111111-2222-333 but after that easy dms changes 111111-2222-333 to 000001-1111-122 and when I try to save the DIR it tells me that
000001-1111-122 is not a valid material master.
As I mentioned this only appears with the unicode client + unicode backend. Any Ideas?

Hi David,
please tell us which version of EasyDMS you use currently. If you do not use EasyDMS 6.00 SP10 I would kindly ask you to see SAP note 1105699 and download this SP from the Service Marketplace.
Further please check if you have maintained the object link customizing correclty in your backend system. Therefore please see the information in the SDN WIKI area for DMS under https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/ca-dms-Object+link
Best regards,
Christoph
P.S.: Please reward points for useful information.

QM certificate object can be link with DMS?

Hello guys!
I have the requirement to have the quality certificates available in DMS.
I am looking the DMS customizing, but I cannot find any standard object link for that purpose.
I was trying to create my own object link, I defined my own screen in SE51 but now I don't know how to implement it like subscreen of SAPLCV130 Screen1500.
Any one can tell me if there is an standard object or how I can link my screen to the program SAPLCV130?
Thanks in advance for your help

Hi Ravindra,
Thanks for your question, this clarify part of my problem.
Now I am trying to link it myself creating an objectlink and a screen in abap.
I know 3 part have to be implemented:
1. Create the object
2. Create the subscreen
3. Develop the Badi.
The 1st and the 3rd are already done....but I don't how how to create the subscreen and the link it to SAPLCV130.
If I create a subscreen 9001 with program SAPLCV130 a reparing code is needed, so I don't know if this is the correct way or if there is another way to do it without touching the standard program.
Thanks and Best Regards

Link with an object or an image?

why isn't it possible to establish a link with an object or an image?

See the topic 'How To Link An Image' in the iBA user tip 'iBA Tips and Tricks 01'.

Is there any downside mixing Objective-C with C++ for iOS apps?

I'd like to use C++ since it's fast and more dynamically in memory reference.
Is there any downside mixing Objective-C with C++ for iOS apps?
When googled for info, I only found tutorials about how to let xcode compile Objective-C with C++.
Thanks for help.

hokanst wrote:
Both Objective-C and C++ are (more or less) extensions of C.
C supports manipulation of pointers and casting of pointers, this implies that both Objective-C and C++ will be able to manipulate C data like arrays, structs ...
Objective-C has classes like NSData to read/write blocks of bytes from/to file and to access ranges of bytes when the data is loaded into memory.
C++ probably has similar classes (I'm not well versed in C++ so I don't know).
If you want to look into using C++ you will probably want to look at Objective-C++, the link below has links to docs on how to use C++ with Objective-C:
http://stackoverflow.com/questions/3684112/what-is-objective-c
Thanks for the info, NSData does what I need.
A replied in the link also mentioned that he's using C++ in his application too. As long as I'm aware of memory management (prevent memory leaks, etc) as @disguise said, it should be fine.
@etresoft indeed, but C is the base language of ObjC, there are ways to deal with.

OLE objects linked to MS Word/MS Excel do not update in InfoView

I am facing the following problem:
- Embedded a Word document as linked OLE object into a crystal report and stored it to Enterprise repository.
- When opening the report with CR Developer from my workstation, links are updated and changes made in the .doc file are reflected, the report is updated
- However when displaying and refreshing the report in InfoView changes aren't reflected.
The OLE link (type document) is set to update automatically. I tried to store the report to the enterprise repository with and without data. Yet no difference - no update in either case. Neither scheduling nor opening and refreshing the report in InfoView helps.
I further inserted an OLE object linked to a bmp image, and for the image refreshing works, even in InfoView
So am I doing something wrong?
Some threads in this forum indicate that only OLE linked pictures (bmp, jpg) can be refreshed dynamically, e.g.
[Dynamically change path to OLE file]
Others indicate that it is also possible to dynamically refresh OLE objects linked to .doc, e.g.
[Re: Link to Word document doesn't refresh when running from Infoview]
- Is it at all possible to dynamically display the contents of .doc or .xls files in a CR when viewing and refreshing the report in InfoView (without the need to reopen and resave the report with CR Developer first) ?
- We are using BOE XI3.1 SP3 and Crystal Reports 2008 SP3. On the BOE server Crystal Reports Developer is not installed. Can this be a prerequisite for the OLE links to update in InfoView?
- Any other suggestions?
Thanks
Konrad

Hi Don,
Thank you for the quick reply.
- You say that this works in CR Designer. That's right. As described above, even I can open the report with CR Designer and the links are getting updated.
- However if I do not reopen and resave the report with Designer ... if I just open and refresh the report in InfoView to get the updated information from the files ... changes are not shown. I face this problem ONLY with ole links to .doc and .exe. OLE links to image formats such as .bmp do work. WHY?
My files are already stored locally to the BO server and the (changed) image files are read and updated from exactly this directory. But not the linked Excel and Word files...
Thanks
Konrad
Edited by: Konrad Hartl on Jan 25, 2011 8:04 PM

Object link with RFQ

Similar Messages

Maybe you are looking for