Object locked by User

Hi ,
When Iam trying to run a ASO cube which has 22 dimension thru .msh which will refresh the outline and then loads the data i.e full load. Iam facing this below error
WARNING - 1053010 - Object [cust] is already locked by user [abc].
I tried by unlock the rule files its not working out. Could you please help me what would be the problem ?
Thanks in Advance,
Raj.

I am suddenly getting the same error (started last week) during my scheduled cube builds. I have all the above commands in my script. There are no users logged in and no objects. The error is actually stating that the current user (the id used for the cube build) has the object locked. This occurs every morning on all my daily cubes. When i manually execute the cube build scripts after the error occurs, they work fine. Some additional notes. The Server is brought down every night and is brought back up every morning at 5am. The cube builds kick off at 7am. I cannot figure out what could be causing this, since it's been working fine for the last couple of years.

Similar Messages

  • When will I use object locking by User ID report?

    Hello,
    I am using EP7 SP9.
    I would like to see all the locked users at the portal.
    The problem is that even that there are locked users (I can locate them individually using the UME), the object locking report doesn't show them when I search by User ID.
    I know I can search it at the UME advanced search, so what the object locking by User ID is used for?

    Hi,
    You can view all the locked objects in your portal under System Administration>>Monitoring. Under the Portal tree node, click on the Object Locking. You can enter the search criteria to UserId and perform the search operation.
    Regards,
    Sujana

  • Read-only mode. Object is currently locked by user: J2EE_ADMIN. hw 2 unlock

    Hi friends,
    <b>i am not able to edit my object in EP</b> , it says
    Read-only mode. Object is currently locked by user: J2EE_ADMIN.
    how do i unlock it ?
    i am on 04s SP9

    Hi Rohit,
       Navigate to
    system_admin -> Monitoring->
    Portal->object_locking->
    There you can view your locked pcd object.Just check it and Unlock.
    That should solve your problem.
    Hope this helps
    Regards
    Vineeth

  • Error in SMQ2 - Object requested is currently locked by user ...

    HI together,
    we send IDOCs from SAP R/3  through XI into an other SAP R/3 system (ORDERS). all messages will be processed but only 2 messages are get stuck in XI with the error message:
    "Object requested is currently locked by user" in SMQ2.
    Do anybody know a solution for that?
    If i trigger the IDOC in WE19 again, the same error occurs again and again.
    Many thanks
    Alex

    HI together,
    very strange happening!!
    i check the mapping of the error message and found out that we have a used a multiply function in the mapping (quantity * price). we have a price > 100000.00 and a quantity of 3. In testtab the mapping runs and runs and runs... nothing happens.
    i created u UDF that solve the problem. i do not know why this is needed or what is wrong the the SAP standard mapping function.
    Unfortunately we have this issue only in production, not in DEV or QA.
    cheers,
    alex

  • Many PCs fail -- object is locked by user BWremote

    Hi friends,
      Today many of Process chains failed at process load IP with the following error:object is locked by user BWremote.  repeat is done and chains are okie now .. i want to knw  wht this error occurs and possible precautions not to occur these error again..
    plz guide me .
    Pavan

    Hi,
    If you are trying to load the data into the ODS or the master data objects then it is possible that you are simulataneoulsy two loads in the same target and it is only possible in the case of the cubes and not with master data and the ODS data as it you cannot load one request if one activation is going on.
    Also it could be becasue you will be trying to load the data at the same time of the attribute change run is running.
    When an attribute change run is happening you will not be able to laod the data in targets.
    This could be the reasons.
    Thanks
    Thanks

  • Object Locked by Same User

    Hi,
        I am working on XI 3.0. While activating the "Standard Change List" in Integration Directory, I get the message "Object currently being edited by same user (my user id)".
      I did check transaction SM12 to delete the lock objects for the user. But it does not display any locked objects. Apprecaite your help in this regard.
    Thanks,
    Yogesh Sawant

    Hi Yogesh,
    execute transaction SMICM, menu "Administration / J2EE Server / Send Hard Shutdown / With Restart".
    The Integration-Engine will be restartet. After ~5 minutes you can log on to the integration builder.
    Regards Udo

  • Error while doing multiple object updation from EP ! object lock error

    HI all,
    I am doing multiple  object updation using a standard RFC(BAPI_PROJECT_MAINTAIN). The RFC i am calling from Enterprise portal. I am sending data to RFC one by one. But the error i am getting is object is locked by user so data can't be save.
    Though i am using Lock and unlock method before and after calling RFC the project lock error comes up.
    What might be the reason
    regards
    sandeep

    Hi Sandeep,
    Is the RFC you use for locking in the same model as the bapi BAPI_PROJECT_MAINTAIN? If it is not then you are using two connections for communication with the sap R/3 backend.
    You can do 2 things.
    1. You could add the RFCs for locking in the same model as the BAPI_PROJECT_MAINTAIN
    2. Instead of adding the RFCs in one model synchronize the connections the models use as follows:
    IWDDynamicRFCModel model1 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model1.class);
    IWDDynamicRFCModel model2 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model2.class);
    model1.setConnectionProvider(model2);
    You can do this in the wdDoInit. This will make sure both models use the same connection but closing a connection will close both at the same time.
    The same problem applies to commit/rollback functionality.
    Regards,
    Jeschael

  • How to lock a user by using random password?

    hello,
    i need to lock a user from a target system by pushing in random passwords for the accounts. i am successfully able to create an adapter that can generate a random string, but the place where i am stuck is that where to use it as i just need to lock the user and not delete it. if the corresponding manager approves the suspension then the account needs to be deleted else again the account needs to be enabled.
    Please help!
    Thanks!

    ok... sorry...
    so what i did is that i have created a resource that has to be provisioned to the user if the user is to be terminated, in which the manager will mention the user to be terminated and the reason.
    now OIM has to lock the user till the reason that has been given by the manager is deemed valid by the second level manager.
    so for that i have a approval and a process form and processes associsted with them. but the problem is that i need to lock the user using the "Entity Adapter" so i need to do so only in the "Data Object Manager" and thus the problem starts as i dont know where to map the adapter that generates the random password so as to lock the user.
    please, if you find anything confusing here, go thru the discussion in the whole of the thread.
    Thanks!

  • Error whiel activating cross system object lock

    Hi ,
    when I am trying to activate the cross system object lock functionality for developement system in tcode /TMWFLOW/CMSCONF  from our solman system , it showing the following error
    'Error RFC destination SM_SMDCLNT000_TRUSTED: You are not authorized to logon to the target system (error code 1).
    Message no. /TMWFLOW/TRACK_N106'
    In the above RFC connection the 'Current user' is provided.
    Can anyone please let me know what I am missing in this?

    Hi Farzan,
        I dont have autorization in Client 000 of SMD system thats why its giving authorization error but when I am trying to activate the object locking for SMD client 321 why the system is trying to logging into the SMD : 000 can we somewhere modify the RFC conection which needs to be used.
    Regards,
    Amar Kamat

  • Serial Number Lock by user

    Hi
    When I am doing the MIGO for PO which is having 30000 quantities and when I am assigning the Serial No then I am getting this error - 'Serial Number is already Locked by User' but actually this Serial No. is not being used by other person.
    Please suggest something how to proceed.

    Hi Sean,
    the below mentioned notes is how to unlock it.
    Goto SE11 and select the Lock Object radio Button. Click on F4
    you will see a popup asking to enter the Lock Object.
    Now Click on the + symbol ( which will show you further select options)
    Now enter the Base table. it is the Table which you have the Searial Number(Master data)
    and Hit enter. It will show you all the Locks existing for that table.
    Now Select the Lock which is locking the Serial Number.
    Now goto your code. from the pattern button Call the FM as DEQUEUE_Lock_object
    Hope This helps.
    Thanks.

  • Budget Exceeded Error- object locked

    Hi,
    When we are trying to crate PO, getting this error: Budget Exceeded. We have  tried the following :
    1. Ran the report RKANBU01 for the project.
    2. CJEN (refresh Project database)
    3. CJBN (Reconstruct availability control for project) - it is giving us message that "object was locked" instead of message "Availability control activated"
    Could anyone please let us know what is resolution at this point, how this object can be unlocked.
    Thanks,
    Saurav
    Edited by: Saurav Kotriwala on Jul 30, 2009 9:42 AM
    Edited by: Saurav Kotriwala on Jul 30, 2009 9:45 AM

    Hi,
    Go to transaction code Ko22 and increase the budget, then you system will allow to end proceed.
    object is nothing for your project which you are using, if some other user is using the project at the same time when you are processing then it will be locked, to unlock the object, check the user who is using the same project code ask him to exist from that or go to sm12 and unlock the user ids.
    Regards,
    Padma

  • Portal -object locked

    Hi All,
    In Portal, system landscape, I had created a external system connection under Portal content and was editing it several times under my Administrator ID. Now, when I go there it says:
    18:03:34 - Read-only mode. Object is currently locked by user: Administrator
    I even restarted this system but the lcok hasnt released. I dont know how to release it.
    Please suggest
    Thanks
    Cyrus

    Hi, Bala,
    Thank you for the post, which help me out toward the annoying issue.
    It seems I need some basic training in terms of EP.
    Anyway, much thanks.

  • Item already locked by user error

    Hi, I am getting the problem item already locked by User error when i try to edit a user idm 6.0 So, any solution for this?

    The basic reason for this error is the object you are trying to access is already locked by another user (helpdesk/ proxy user or admin).
    Generally you can check the lock status who has the active lock on the object from the lh console also.
    http://identitycontrol.blogspot.com

  • Data in Infoprovider is locked by User - Integrated Planning

    Hello Gurus,
    My Users have different Authorizations based on Company Code. One User (BWCHECK) has the authorization for Company code 5400. The other User (BWCHECK1) has the authorization for Company code 6100. 0COMP_CODE is set as Authorization object
    Although we are working on IP we are working with the "old" authorization concept.
    If BWCHECK is working and BWCHECK1 tries also to work the message is "Data in Infoprovider is locked by User BWCHECK. Both have different company codes.
    Do you have a solution for this? Would be very helpful.
    Thank you in advance.
    Kind Regards
    Doris

    Hallo Doris,
    first check that you restrict 0COMP_CODE in your query as ment by Rodrigo.
    You can use the variable of the type "authorized values" in order to restrict the user to all values that are allowed through authorization.
    If this does not solve the problem, you can use rsplan / "Manage Lock Server" in order to check the lock settings.
    Regards,
    Kirill

  • Object lock release

    Hi experts,
                  How to release object lock like  BOM TROLLEY 1 MDU 1 is locked by user  ,
                Even  after closing all the screens relevent to that BOM , the problem exist .
    how to rectify this
    Regards
    s.suresh kanna

    hi
    this might be becosue of lock entries,
    check form SM12 and delete them
    -ashok

Maybe you are looking for