*******Object Name required*

Hi,
Can anyone please tell me the object name(BOR) for sales order?
Regards,
Vijay
********REPLIES TO BE REWARDED SURELY************

Check BUS2032
http://help.sap.com/saphelp_46c/helpdata/en/a5/3ec8534ac011d1894e0000e829fbbd/content.htm
chk this also
http://help.sap.com/saphelp_46c/helpdata/en/a5/3ec9734ac011d1894e0000e829fbbd/frameset.htm

Similar Messages

Create directory / object name must NOT be case sensitive

SQL Dev. 2.1 - the wizard, chosen from the left side navigator, submits a wrong create statement in which the object name becomes case-sensitive. This should not be so! Even if you write the new object name in small letters , the object name must end up in the data dictionary with capitals. kind regards Inger ([email protected])

Which wizard? If I use a create table wizard, for example, and enter the table in lower case, this is indeed stored in the DB as upper case, as you require.
Please provide more detail for your problem.
Sue

File communication channel issue : object name too long

Hi Experts,
My requirement is to place the successful files in folder and un-successful files in one folder after processing.
we used parameterized mapping to achieve this requirement.
I'm facing below issues, please help me to resolve.
" An error occurred while connecting to the FTP server. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Unexpected reply codeSpecified object name too long, limit is 10 characters: $Filepath_Su.'. For details, contact your FTP server vendor.
As per my understanding it is not taking the path specified,because of length issue.
Please send me your valuable inputs and help me.
Thanks in advance for your help.
Regards
Bhargava Krishna

Hello,
By loking ur error description, it's quite evident that it's a FTP sever issue?
Sometime on FTP server, there is a check which is enabled to limit the length of file names, and i think the same has been recently implemented on ur FTP server. So instead of changing ur config, check with ur FTP admin.
Tested the same after tweaking existing FTP server settings.
Thanks
Amit Srivastava

Invalid object name 'dbo.uf_GetRateSrcMember'

Hello Friends,
We recently applied the SP3 (CPMBPC03P_1-20002499) for BPC 5.1. We are in Single Server environment. Our BPC 5.1 build was 5.0.486 which was required to install the SP3. After the installation it is 5.0.502
We are getting the error below when we are trying to change the appliction sets from from the main page.
Any help to resolve the issue is appreciated
Server Error in '/OSoft' Application. Invalid object name 'dbo.uf_GetRateSrcMember'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Invalid object name 'dbo.uf_GetRateSrcMember'.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Stack Trace:
[Exception: Invalid object name 'dbo.uf_GetRateSrcMember'.]
   Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack) +905
   OSoft.Consumers.ZFP.WebBase.PageBase.GetCurrentView() +518
   OSoft.Consumers.ZFP.WebBase.PageBase.get_CurrentView(String strDimension) +43
   ASP.Landing_aspx.__Render__control1(HtmlTextWriter __output, Control parameterContainer) +95
   System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +27
   System.Web.UI.Control.Render(HtmlTextWriter writer) +7
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +243
   System.Web.UI.Page.ProcessRequestMain() +1926
Really looking forward for answers.
I would really really really appreciate any help
Thanks

Kaji,
I had the same problem. Here is the solution:
Dear customer,
This issue looks similar to a previously reported bug.
In general there is the possibility that some service/process
remained in a bad status and this can be fixed by restarting the server
But could you please also check, whether this description fits
to your scenario:
This issue occurred because when there are no secured dimensions
in an appset,
The modified application process remove the user function
which is used for checking secured dimension.
In case there is no secured dimension in the appset the
problem occurres.
This issue looks similar to a previously reported bug.
In general there is the possibility that some service/process
remained in a bad status and this can be fixed by restarting the server
But could you please also check, whether this description fits
to your scenario:
This issue occurred because when there are no secured dimensions
in an appset,
The modified application process remove the user function
which is used for checking secured dimension.
In case there is no secured dimension in the appset the
problem occurres.
When modify application is run , the user function has been removed.
A workaround is this:
if you make Entity and RateSrc as secured dimension,
the user function will be made in the appset again.
Then you can change the user function as other name in database
by renaming. After finished the rename,
you can change the dimension as unsecured dimension like current.
Then, you have to replace the user function name
as original function name.
Because the user function name is dependent on dimension name.
If you can#t connect BPC Admin due to web page error,
you have to execute the EverestAdmin.exe file
in "C:\Program Files\BPC"
Hope it solves the prob...
Nic

Object Name for Release Group

All,
Can anyone please tell me the object name for Release Group ?
regards

Hi Sandeep,
for what you are looking for object name of release group.???
If you want to add release group in Authorization profile,it is not possible.
You can add Release code in authorization profile...not release group.
If you have any specific requirement,please let me know.
Regards,
Manish.
If ans is usefull,don't forget to reward.

MBAM 2.5 Reports Fail with "Invalid object name 'v_GS_MBAM_POLICY'."

Utilizing the SSRS Reports for MBAM 2.5 Integrated into Configuration Manager 2012 R2 Cu3, when I run the reports it states that the view
'v_GS_MBAM_POLICY' does not exist.
The complexing thing though is that there are computers that are reporting the HINV Class called 'Win32Reg_MBAMPolicy' So I would think this view would have been created.
Does anyone know the process by which the view gets generated since my HINV is reporting back the information, yet the view has not been created in the DB yet... It makes no sense.
The error is:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Query execution failed for dataset 'ComplianceDetails'. (rsErrorExecutingCommand)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Invalid object name 'v_GS_MBAM_POLICY'.
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
David Baur

We ran into this error as well. Turns out that MBAM-provided reports to SCCM 2012 fail with an error unless the Win32Reg_MBAMPolicy class is added to SCCM, which also updates the SCCM SQL with required Views, including "v_GS_MBAM_POLICY".
The solution that we finally came up with was to import an updated MOF file to include the BitLocker Policy (Win32Reg_MBAMPolicy) class into the "Hardware Inventory" section of the Default Client Policy. Once the import is complete SQL also gets
the appropriate view created.
The instructions on how to create and import the MOF file can be found in the link below.
http://technet.microsoft.com/en-US/library/dn237295.aspx
Chris Keene
Product Specialist at Wave.

How can I get object name inside the object

I'm trying to get the object name inside its pl/sql code to pass to another procedure, there must be a way to select object name from system tables ?
Thanks for help

Dear Garcia,
Let me try to help you out..
First of all let me confirm your requirement.. ie you want to get the attribute 'CONFIG_LINE_COL' of type cl_crm_bol_entity_col from the object 'ISUORDERITEM" right ?..
try this code,
data: lr_col type ref to cl_crm_bol_entity_col.
lr_col = me->typed_context->isuorderitem->config_line_col.
now you got the collection in lr_col variable.. you can play with this data now. I dont know whats your actual requirement so that i can help you further :).
Hope it helps.
Regards, Sudeep..
Edited by: sudeep vd on Oct 2, 2008 7:31 PM

30EA1: "Connection" panel behavior on clicks of twisties and object names

EA1 on Mac OS X.
SQLD's schema object tree has always been a little frisky in these ways:
* If i click the twisty (icon to the left of an object or category name) SQLD acts as though I asked it to do the default action on the object to the right of the twisty. I didn't. I really just wanted SQLD to reveal what's under / in the object. Now, if I click the object's name, maybe I'm asking for the default action like "open" (see below).
By being frisky, SQLD is likely wasting both my time and the resources it takes to do the default action.
* If I land on an object name by, say, using my down arrow key, SQLD acts as though I asked it to do something other than move the cursor (selection). I didn't. I think doing something should require that I do some other action like press the enter key, select a command from a context menu -- something.
Hence, this tree can't be navigated by keyboard. In (my idea of) a better SQLD, I could navigate the true with mouse or keyboard. I could open and close categories and object trees with + and - or left/right, I could use my platform's key for "show the context menu." Same for the mouse cursor.
* A specific case of the above two complaints working together is packages.
- I open "Packages," and see mine.
- I click the twisty left of a package name. SQLD opens the tree (good).
- But it also opens the package spec, which usually isn't what I want. More often, I want access to the body item.
- Then it closes the connection panel (because I keep that closed unless I need it).
So I'm left looking at a spec. Sure, there's a button for the body -- but I have to use the mouse cursor to get to it.

EA1 on Mac OS X.
SQLD's schema object tree has always been a little frisky in these ways:
* If i click the twisty (icon to the left of an object or category name) SQLD acts as though I asked it to do the default action on the object to the right of the twisty. I didn't. I really just wanted SQLD to reveal what's under / in the object. Now, if I click the object's name, maybe I'm asking for the default action like "open" (see below).
By being frisky, SQLD is likely wasting both my time and the resources it takes to do the default action.
* If I land on an object name by, say, using my down arrow key, SQLD acts as though I asked it to do something other than move the cursor (selection). I didn't. I think doing something should require that I do some other action like press the enter key, select a command from a context menu -- something.
Hence, this tree can't be navigated by keyboard. In (my idea of) a better SQLD, I could navigate the true with mouse or keyboard. I could open and close categories and object trees with + and - or left/right, I could use my platform's key for "show the context menu." Same for the mouse cursor.
* A specific case of the above two complaints working together is packages.
- I open "Packages," and see mine.
- I click the twisty left of a package name. SQLD opens the tree (good).
- But it also opens the package spec, which usually isn't what I want. More often, I want access to the body item.
- Then it closes the connection panel (because I keep that closed unless I need it).
So I'm left looking at a spec. Sure, there's a button for the body -- but I have to use the mouse cursor to get to it.

IPTC Headline vs IPTC Object Name

I'm just curious....
Everything I've read about using IPTC fields recommends that we use HEADLINE for the short descriptive caption. And that OBJECT NAME be reserved for a more technical reference.
Yet, I see that iPhoto uses the Object Name....
Do we know why Apple made that decision?
I have lots of data in Headline.... I'll have to transfer it to Title before I can import to iPhoto.
Thanks for your consideration
Marion

iPhoto uses IPTC field 120, Caption/Abstract, for the descriptions. The titles are put into the IPTC field 05 - Object Name (Title). Why Apple uses those fields: you'll have to ask Apple: http://www.apple.com/feedback/iphoto.html
The following are the IPTC field titles:
*05Object Name (Title)
10Urgency
15Category
20Supplemental Categories
25Keywords
40Special Instructions
55Date Created
80By-line (Author)
85By-line Title(Author position)
90City
95Province/State
101Country/Primary Location Nam
103Original Transmission Reference
105Headline
110Credit
115Source
116Copyright Notice
120Caption/Abstract
122Writer/Editor
You can see a lising of the core IPTC fields here: IPTC Core mapped fields PDF
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

To capture Formula field name i.e Object name..

Post Author: achaithanya
CA Forum: Formula
Hi ,
Here i have createda formula field and inserted it into my Report.
Right click that field in 'Common' tab we get Object name.is it possible to capture this and based on this can we write supress condition.
Lets consider Object name as 'ON'. I need to take this 'ON' in my formula field and use it for other calculations.
Thanks,
Chaithanya.

Post Author: bryanflora
CA Forum: Formula
I will recommend you write your original requirement.Instead of such a question.Maybe you're thinking in the wrong way or difficult way.

Invalid object name 'DUAL'

setup 11g dg4msql to connect to a microsoft sql 2005 server
all sqlplus select statements fail
select * from dual@dg4msql;
SQL> select * from dual@debtcon;
ERROR:
ORA-28511: lost RPC connection to heterogeneous remote agent using SID=
ORA-02063: preceding line from DEBTCON
Process ID: 11597
Session ID: 249 Serial number: 95
no rows selected
The logfile shows errors:
Entered hgopoer at 2010/03/01-13:14:45
hgopoer, line 233: got native error 208 and sqlstate 42S02; message follows...
[Oracle][ODBC SQL Server Driver][SQL Server]Invalid object name 'DUAL'. {42S02,NativeErr = 208}
Exiting hgocont, rc=0 at 2010/03/01-13:46:54 with error ptr FILE:hgocont.c LINE:2685 FUNCTION:hgocont() ID:SQLDriverConnect
hgopoer, line 233: got native error 1007 and sqlstate 22003; message follows...
[Oracle][ODBC SQL Server Driver][SQL Server]The number '042100421004210042110421104211042190421904219' is out of the range for numeric representation (maximum precision 38). {22003,NativeErr = 1007}[Oracle][ODBC SQL Server Driver][SQL Server]Incorrect syntax near '042100421004210042110421104211042190421904219'. {10103,NativeErr = 102}
later on in the logfile it appears to actually fetch the table's columns :
hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x20:NEGATIVE_HOADADTY,0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
5 SMALLINT Y 2 2 0/ 0 0 0 0 uid
5 SMALLINT Y 2 2 0/ 0 0 0 0 status
12 VARCHAR N 384 384 128/128 873 0 40 name
-3 VARBINARY Y 85 85 0/ 0 0 0 20 sid
-3 VARBINARY Y 2048 2048 0/ 0 0 0 20 roles
91 DATE N 16 16 0/ 0 0 0 0 createdate
91 DATE N 16 16 0/ 0 0 0 0 updatedate
5 SMALLINT Y 2 2 0/ 0 0 0 0 altuid
-3 VARBINARY Y 256 256 0/ 0 0 0 20 password
5 SMALLINT Y 2 2 0/ 0 0 0 0 gid
12 VARCHAR Y 255 255 0/ 0 0 0 200 environ
4 INTEGER Y 4 4 0/ 0 0 0 0 hasdbaccess
4 INTEGER Y 4 4 0/ 0 0 0 0 islogin
4 INTEGER Y 4 4 0/ 0 0 0 0 isntname
4 INTEGER Y 4 4 0/ 0 0 0 0 isntgroup
4 INTEGER Y 4 4 0/ 0 0 0 0 isntuser
4 INTEGER Y 4 4 0/ 0 0 0 0 issqluser
4 INTEGER Y 4 4 0/ 0 0 0 0 isaliased
4 INTEGER Y 4 4 0/ 0 0 0 0 issqlrole
4 INTEGER Y 4 4 0/ 0 0 0 0 isapprole
But displays nothing in the sqlplus output !!??
Edited by: user12701320 on Mar 1, 2010 10:52 AM

Hi,
On which platform have you installed DG4MSQL and what is the full version -11.1 or 11.2 ?
The only similar problems are on Linux where the operating system install has not been installed to comply with Oracle requirements.
The actual problem cause is this error -
hgopoer, line 233: got native error 1007 and sqlstate 22003; message follows...
and the 'dual' error is not relevant at the moment.
Regards,
Mike

Is there a list of table name and object name? (oCompany.GetBusinessObject)

Hi,
How do I find the objects regarding the tables in SBO?
Example Item Master, I use following statement:
SAPbobsCOM.Items oItem;
oItem = ( SAPbobsCOM.Items ) oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oItems);
I like to find the object for SPP1.
Is there a list of table name and object name?
Thank you,
Rune

Thank you, Owen,
Yes, I found the table name and method name in SDK Help Center:
On your P/C, click START. Select All programs , SAP Business One > SDK > SDK Help Center. Then select DI API, then DI API Reference. If you scroll down this window you will find all existing classes. You will then find the SpecialPrices and the SpecialPricesDataAreas. All the information required to code is in there.

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

Find object Names in a file and print all those objects Names

Hi All,
I am new to this forum.
I want to know how to read only objects names in txt file. In the text file i have sql queries, package names, Function Name. I need to read all the objects and display out put. The file contains around 20000 Lines.
Please suggest me.
Thanks & Regards
Suresh.

Gurram wrote:
want to read .rex File. The file contains combination of SQL code with table Names, Packages,Functions,There are three basic ways to read an external file.
You can use UTL_FILE and use standard/basic file I/O calls like fread() and fwrite() - common amongst most (if not all) programming languages.
You can define an external table for the file, and SQL*Load the contents of the file dynamically via a SQL SELECT statement.
You can load the file into a CLOB using DBMS_LOB and then process it - quite useful if the text file is XML as the XMLTYPE supports parsing a a CLOB containing XML.
I want to pick Each object name put in a separate file line by line.That in turn will need to use UTL_FILE to create an external file.
Keep in mind though that your in a database environment with PL/SQL. The very best place for data is inside the database in SQL tables. Not outside as external files. Thus you need to ask yourself whether dealing this way with external files is the best solution, and a robust and scalable one.
Granted, many times from the database side we need to deal with external files. The optimal method usually is to load that file's data into a database table as structured data - data that can be accessed via SQL and sorted, filtered, aggregated and analysed.
To provide a "file" as output - this should ideally be done directly from structured data (SQL tables). And can be done using HTTP (via a web enabled PL/SQL procedure that supplies the file content as a http Mime stream), using FTP (via <i>UTL_TCP</i>) or as a CLOB via a PL/SQL call interface. Using UTL_FILE is not necessarily the only option.

SSRS Error : Query execution failed for dataset 'dataSet'. (rsErrorExecutingCommand) Semantic query execution failed. Invalid object name 'RPT.*********'. (rsSemanticQueryEngineError)

I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution       failed for dataset 'dataSet'.
      (rsErrorExecutingCommand
Semantic query        execution failed. Invalid object name
       'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.

Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

*************Object Name required*******

Similar Messages

Maybe you are looking for

*******Object Name required*