Object names (object prefix + ID) must not exceed 40 characters?

Is there a limit to technical names length(object prefix + ID) in EP6.0?
The business packages certification documentation contains rule that technical names should not exceed 40 characters. Not sure why this is.
Thanks for your clarifications.

Hi
Please go through the thread:
http://help.sap.com/saphelp_nw04/helpdata/en/c5/e4ade6453d11d189430000e829fbbd/content.htm
Hope it helps you.
Regards
Elizabeth

Similar Messages

Purchase Order quantity must not Exceed Sales Order quantity

Dear Experts
My requirement is when i am creating PO in me21n and taking Document type as Domestic PO and giving account assignmnet as "C" Sales Order, must have to enter Material and quantity and must have to Give Sales Order number and item no in account assignmnet tab , the quantity i am entering in PO must not exceed my Sales Order quantity that is my requirement.
Regards
Abi

Hi,
You do not create a PO with reference to sales order. In PO you enter sales order number for reference. A purchase requsition can be created directly from Sales order or through MRP depending on the system settings. Then this PR can be converted to PO. here you can restrict the quantity. As in order to change the quantity in PR also you will have to change the quantity in sales order.
Regards
Raj

Total length must not exceed 65535 bytes

We're doing an upgrade project to 6.0 with Unicode. When I try to reactivate certain classes, I get the following error:
Unable to generate ZCL_ISU_EWB===================CP
Error message from generation:
The instance data in class ZCL_ISU_EWB has a total length of 272456 bytes. However, the total length must not exceed 65535 bytes (any necessary alignment is included in the total length).
Any idea how to solve this?

Hello Filip Camerman ,
Please go to
Method - > check -> class generation limits .
There would be generation limits and the corresponding traffic lights . Please check it and the subsequent remedy given for it .If problem persists please post back .
Comradely,
K.Sibi

Sales Order quantity Must not exceed Purchase order quantity

Dear Experts,
My requirement is when i am creating a Purchase order giving referenece as Sales Order .. system must not allow the user to enter more than Sales order quantity.
Ex : Sales Order 1234
        Material : AAAA
        Quantity : 100
while creating a Purchase order for Mat AAAA giving reference of Sales order i.e 1234 and quantity 150 system must not allow user to enter more than sales order quantity . If user wants to create PO for 150 he must have to ammend the sales order from 100 to 150 is it possible.
Kindly do the needful
Regards
abhi

Dear Abhinav,
First of all, Purchase Order will get created with reference to Purchase requisition (T. Code: VOV7 --> Item Cat.: TAS --> Tab: Transaction Flow --> Field: Automatic PO Creation), and not with reference to Sales Order.
This is Purchase requisition, which gets created with reference to Sales Order; based upon settings in:
T. Code: VOV6 --> Schd. Line Cat.: CS
Order Type            NB    Purchase Requisition
Item Category         5     Third-party
Acct Assgt Cat.       X     All aux.acct.assgts.
Now, coming to your requirement (based up on my inputs),
My requirement is when i am creating a Purchase order giving referenece as Sales Order .. system must not allow the user to enter more than Sales order quantity.
To Restrict Purchase requisition quantity in PO, then in T. Code: OMCQ
Or, Path: SPRO > img > MM > Purchasing > Environment Data > Define Attributes of System Messages
Here make following messages as Error;
06 076 Materials of requisition & item & alr. ordered in full
06 254 Order quantity greater than requisition quantity
Now, in Purchase Requisition, if it is created for 100 qty (with ref. to Sales Order) and if you adopt the same in Purchase Order and try to change the qty to 150, then system will not allow you change and throws the error.
Best Regards,
Amit

The technical name of object QVIW zabcd is not valid

Hello Gurus
I am facing a weird problem.
I run a query it works fine but when I try to save the view by right click -- save view it ask me for the Description and Technical name after putting this information I press save. Istead of saving it it gives me error "The technical name of object QVIW zabcd is not valid"
Please help me asap
Our system is on SP18 both for abap and Java

Hi Bala Duwuri,
Thanks for the input...
Can you please give me your valuable inputs on this ........
I have a standalone custom web dynpro application which needs to be linked to standard team viewer application.
What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
Right now am following the below link But in that no where they were talking about the webdynpro eventing.
then how come two views will get linked fucntionally so that team viewer will pass the information to my custom WD application??????????????????? Please help
Please give me a clear view on how to integrate the team viewer application with custom development WD application.
If code is required pls provide that also.............
I would appreciate the useful inputs with higher points.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
Thanks in Advance,
Dharani

ORA-34492: Analytic workspace object cubename _STORED does not exist.

I am having issues accessing cube data from a user other than where the AW was built.
Following is what I have done in User-1:
1. Create two AW's in User-1 : AW-1 and AW-2.
2. Create all objects in these two AW's
3. AW-2 is dynamically attached on attaching AW-1 by using PERMIT startup programs. Please refer Attaching multiple AW's
4. Refreshed both AW's to load data
5. ALLCOMPILE - no errors.
6. Created some SQL views on User-1 which basically query the underlying cube views. I also have some queries using the olap_table option.
7. All my querries work fine in User-1. I can access data from AW-1 and AW-2.
However, we give access to the above SQL views through an abstract user: User-abs. In 10g, all we did was grant select privs to all the User-1.AW$ tables and also on all the sql views. This would let User-abs get data from the cubes in User-1.
I am not able to get User-abs to do the same in 11g. We encounter an error mentioning that the workspace object <cubename>_STORED does not exist. The cubename it is referring to exists in AW-2.
I granted select privs on all AW$ tables, dimension views, cube views and the abstracted sql views but the error persists.
I tried searching this forum but could not find any helpful leads. Any help will be greatly appreciated.
Thanks!
Database - 11.2.0.1
AWM - 11.2.0.2.0A

I can think of two possible problems. First, you may not be properly qualifying the owner name when you refer to the object. This can be important when refering to objects owned by other schemas. For example instead of 'my_cube_stored' you would say 'user-1.aw-2!my_cube_stored'. You should also be careful about the order in which you attach the AWs. Do you want AW-2 attached first or last? Use the LAST keyword on AW ATTACH to control this.
Another possibility is that you have added additional logic to PERMIT_READ over and above the 'aw attach' comand. I was able to recreate the error with the following code in a new AW called TEST_AW in the GLOBAL schema.
DEFINE PERMIT_READ PROGRAM BOOLEAN
PROGRAM
aw attach global.global
show global.global!units_cube_stored
return true
ENDAttaching TEST_AW in RO mode as any user gives me the following error.
ORA-34492: Analytic workspace object GLOBAL.GLOBAL!UNITS_CUBE_STORED does not
exist.
ORA-06512: at "SYS.DBMS_AW", line 93
ORA-06512: at "SYS.DBMS_AW", line 122
ORA-06512: at line 1Here is the documentation for PERMIT_READ
>
PERMIT_READ
A PERMIT_READ program is a program that you can create and that Oracle OLAP checks for by name when an AW ATTACH read-only command executes. Depending on the value returned by the program, Oracle OLAP executes the code within the program after attaching the analytic workspace. Depending on the statements in the permit_read program the user is granted or denied access to specific objects or sets of object values. Within permit_read program, you can specify PERMIT commands that grant or restrict access to individual workspace objects. All of the objects referred to in a given permit_read must exist in the same analytic workspace.
>
Note, especially, the restriction in the last sentence. This means that a PERMIT_READ program in AW1, for example, cannot refer to objects in AW2. So this is why my PERMIT_READ doesn't work. The AUTOGO does not have these restrictions, but as we know from the forum post you cited, AUTOGO is broken in 11.2.0.1. You can move forward to 11.2.0.2 where AUTOGO is fixed, but there is workaround, which is to add a PERMIT_READ program to the second AW to do the work. For example, if I add this PERMIT_READ to GLOBAL and remove the 'show' command from the PERMIT_READ in TEST_AW, then everything works as expected.
DEFINE PERMIT_READ PROGRAM BOOLEAN
PROGRAM
if aw(attached 'test_aw')
then do
show global.global!units_cube_stored
doend
return true
END

KO23 Object currency assigned value not equal Line item assigned value

Dear all:
I have one problem. Some Internal Order budget use KO23 view about Object currency assigned value not equal Standard Reprt
S_ALR_87013019 - List: Budget/Actual/Commitments assign value.
I don't knew what happen ?
So I wish someone can give me a hand. Tel me how to fix this problem.
thank you !

Hi Jason,
First of all:
The displayed account code must be translated into the internally used code ("_SYS...") when using segmentation - when not using segemntation it is just internal code = displayed code.
The code displayed is just a sample to give you a hint in case you are already familiar with the SAP Business One application.
Therefore the sample code does not talk about where you got e.g. the value for FormatCode from ("FormatCode" is e.g. a field in table OACT where the account name with segments is (redundantly) stored without separators).
The user should know on which account he/she wants to book a line on; maybe you might want to give some help to the user by displaying a dialog with suitable - or preselected accounts?
In addition I am sure you know how to assign a string value to a string property - without explicitly writing it, right?
HTH,
Frank

Database not found/Error: ORA-16621: database name for ADD DATABASE must be

I am new to Data Guard and am trying to set up Data Guard Broker. I had created a configuration file with both my primary and standby databases and at one time I could show both databases. But now I can no longer show the standby database nor can I enable, disable or reinstate it. Here is what I have:
Primary Database: orcl10g
Standby Database: 10gSB
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose orcl10g
Database
Name: orcl10g
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
orcl10g
Properties:
InitialConnectIdentifier = 'orcl10g'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '10gSB, orcl10g'
LogFileNameConvert = '/oracle/oracle/product/10.2.0/oradata/orcl10g/redo01.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo01.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo02.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo02.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo03.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo03.log'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'remarkable.mammothnetworks.com'
SidName = 'orcl10g'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521))'
StandbyArchiveLocation = '/oracle/flash_recovery_area/orcl10g/archivelog'
AlternateLocation = ''
LogArchiveTrace = '1024'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> remove database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> reinstate database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> enable database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> add database '10gSB' as
connect identifier is 10gSB
maintained as physical;Error: ORA-16621: database name for ADD DATABASE must be unique
Failed.
How can I get Data Guard to see the standby database correctly again?

Thank you for the constructive feedback. I have been able to make progress on this issue.
I did check the Data Guard Log files as you suggested. I did not find anything when I checked them before but this time I found the following:
DG 2011-06-16-17:23:18 0 2 0 RSM detected log transport problem: log transport for database '10gSB' has the following error.
DG 2011-06-16-17:23:18 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16737: the redo transport service for standby database "10gSB" has an error
DG 2011-06-16-17:23:18 0 2 0 NSV1: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 0 RSM0: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
I verified that I am able to connect to both the primary and standby databases via external connections:
-bash-3.2$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 17-JUN-2011 12:41:03
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 17-JUN-2011 01:40:30
Uptime 0 days 11 hr. 0 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521)))
Services Summary...
Service "10gSB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_DGB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_XPT" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl10g" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10gXDB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_DGB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_XPT" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
The command completed successfully
-bash-3.2$
-bash-3.2$
-bash-3.2$ sqlplus system/dbas4ever@orcl10g
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:41 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
-bash-3.2$ sqlplus system/dbas4ver@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:59 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress <== I think this is normal since the database is in mount mode
Enter user-name:
I also checked the listener log file and did see and error associated with a known bug:
WARNING: Subscription for node down event still pending
So I added the following to the listener.ora file and bounced the listener:
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
That seems to have taken care of the error.
The following is my listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC = ( GLOBAL_DBNAME = 10gsb_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = 10gsb.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
I again tried connecting externally to the standby database:
-bash-3.2$ sqlplus system/dbas4ever@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 13:09:00 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Enter user-name:
and see this in the listener.log file:
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11357)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11358)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:24 * service_update * 10gSB * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25119)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25120)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=emagent)(HOST=localhost.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25121)) * establish * orcl10g * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11420)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11422)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:24 * service_update * 10gSB * 0
I tried again to see the database in Data Guard Broker:
DGMGRL> show database 10gSB
Object "10gsb" was not found
however, I then was able to add the database in Data Guard Broker:
DGMGRL> add database 10gSB
as connect identifier is 10gSB
maintained as physical;Database "10gsb" added <== this is progress!!!
However the configuration shows the following:
DGMGRL> show database 10gSB
Database
Name: 10gsb
Role: PHYSICAL STANDBY
Enabled: NO
Intended State: OFFLINE
Instance(s):
10gSB
Current status for "10gsb":
DISABLED <=====
So I tried to enable the database:
DGMGRL> enable database 10gSB
Error: ORA-16626: failed to enable specified object
Failed.
and I tried to reinstate the database:
DGMGRL> reinstate database 10gSB
Reinstating database "10gsb", please wait...
Error: ORA-16653: failed to reinstate database
Failed.
Reinstatement of database "10gsb" failed
So I checked the configuration and now see two entries for the standby database but with case differences:
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
10gsb - Physical standby database (disabled)
Current status for "orcl10g":
SUCCESS
Question: How do I get rid of 10gSB and enable 10gsb?

Win 2K8 R2 - Group Policy Management - Failed to Open Group Policy Object. You may not have appropriate rights. The network path was not found.

New to Windows Server 2008 R2 Administration.
I setup this Windows 2008 R2 Server on a Dell 2950 Poweredge server and have been migrating users off of an old NT style domain running on Samba 3.6 on CentOS.
I have the domain setup (nicholas.sacredheartsaratoga.org), added users, and have moved users / computers over to the new domain and working.
When attempting to setup Group Policy Objects, I continually get the "Failed to Open Group Policy Object" Error. This is driving me nuts and seems to be a 49 error.. which I have done a ton of research on but none of the suggested fixes seem
to be working.
I've been working at this for a couple of weeks and really need this fixed to be able to set GPO's correctly.
Here is my IPCONFIG /ALL
C:\Users\Administrator.NICHOLAS.000>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : NICHOLAS
Primary Dns Suffix . . . . . . . : sacredheartsaratoga.org
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : nicholas.sacredheartsaratoga.org
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #2
Physical Address. . . . . . . . . : 00-1D-09-27-F1-63
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::542:43f2:2aaf:d903%13(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.20.21(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.20.3
DHCPv6 IAID . . . . . . . . . . . : 301997321
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-7D-DC-B6-00-1D-09-27-F1-61
DNS Servers . . . . . . . . . . . : 10.10.20.21
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{41653A38-9372-4740-BB03-41950A9C9BC0}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Will post the entire contents of my gpreport as soon as my account is verified... but this is the jist of the error being reported:
Component Status<v:group alt="Error" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:oval class="vmlimage" fillcolor="red" strokecolor="red" style="width:100px;height:100px;"></v:oval><v:line
class="vmlimage" from="25,25" strokecolor="white" strokeweight="3px" style="" to="75,75"></v:line><v:line class="vmlimage" from="75,25" strokecolor="white" strokeweight="3px" style="" to="25,75"></v:line></v:group>
Component Name
Status
Last Process Time
Group Policy Infrastructure
Failed
2/17/2014 2:50:06 PM
Group Policy Infrastructure failed due to the error listed below.
Logon failure: unknown user name or bad password.
Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2/17/2014 2:50:05 PM and 2/17/2014 2:50:06 PM.
Registry
(N/A)
1/4/2014 1:45:29 PM
Security
(N/A)
1/4/2014 1:45:35 PM
User Configuration Summary

How to verify whether the persistence unit objects are persistent or not?

How to verify whether the persistence unit objects are persistent or not?
I have successfully configure and deploy the Employees object as a persistence unit in Oracle Coherence according to the guide of Chapter 6 of Tutorial for Oracle Coherence 3.5.
Using the RunEmployeeExample script, I have got the right results. I can see that after the cache object is updated, the database table (Employees) is also updated accordingly. The following is the output:
2009-11-05 11:09:55.043/53.467 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:09:54.867, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) joined Cluster with senior member 1
2009-11-05 11:09:55.604/54.028 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior memb
er 1
2009-11-05 11:09:56.885/55.309 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{Sta
te=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4084]}
2009-11-05 11:09:57.847/56.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service JpaDistributedCache with se
nior member 1
2009-11-05 11:09:57.917/56.341 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Service JpaDistributed
Cache: sending ServiceConfigSync containing 258 entries to Member 2
2009-11-05 11:10:04.086/62.510 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Deferring the distribu
tion due to 1 pending configuration updates
[EL Info]: 2009-11-05 11:10:14.36--ServerSession(2883071)--EclipseLink, version: Eclipse Persistence Services - 1.1.1.v20090430-r4097
[EL Info]: 2009-11-05 11:10:22.312--ServerSession(2883071)--file:/C:/JDeveloper/mywork/AppJPA/JPA/classes/-JPA login successful
2009-11-05 11:10:24.305/82.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): 3> Transferring 128 ou
t of 257 primary partitions to member 2 requesting 128
2009-11-05 11:10:25.697/84.121 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 1> Transferring 129 ou
t of 129 partitions to a node-safe backup 1 at member 2 (under 129)
2009-11-05 11:10:25.857/84.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Transferring 0KB of ba
ckup[1] for PartitionSet{128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180,
181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209,
210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238,
239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to member 2
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: disconnected from member 2 due to a kill r
equest
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service Management with senior member
1
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service JpaDistributedCache with seni
or member 1
2009-11-05 11:10:40.708/99.132 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:10:40.708, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) left Cluster with senior member 1
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:JpaDistributedCache, member=1): Restored from backup
128 partitions
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 0, 1, 2, 3, 4, 5, 6, 7
, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 4
4, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 11
3, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
2009-11-05 11:28:39.800/1178.224 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:28:39.635, A
ddress=192.168.8.80:8089, MachineId=24656, Location=site:metsys.metex.com,machine:mw12,process:1752, Role=CoherenceConsole) joined Cluster with s
enior member 1
2009-11-05 11:28:40.231/1178.655 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior me
mber 1
2009-11-05 11:28:41.633/1180.057 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{S
tate=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4143]}
2009-11-05 11:30:01.658/1260.082 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with sen
ior member 2But I cannot verify if the persistence unit is still persistent.
Edited by: jetq on Nov 5, 2009 11:49 AM

I start a Coherence Console in another Windows Command Prompt as the following:
D:\coherence\bin> coherence.cmd
** Starting storage disabled console **
java version "1.6.0_11"
Oracle Coherence Version 3.5.2/463
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-11-05 11:57:22.167/9.734 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Service Cluster joined th
e cluster with senior service member n/a
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Failed to satisfy the v
ariance: allowed=16, actual=20
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Increasing allowable va
riance to 17
2009-11-05 11:57:22.677/10.244 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Time
stamp=2009-11-05 11:57:22.392, Address=192.168.8.80:8089, MachineId=24656, Location=process:460, Role=CoherenceConsole,
Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(Id
=1, Timestamp=2009-11-05 11:09:09.738, Address=192.168.8.80:8088, MachineId=24656, Location=process:1816, Role=Coherence
Server, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
Management with senior member 1
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
JpaDistributedCache with senior member 1
2009-11-05 11:57:23.108/10.675 Oracle Coherence GE 3.5.2/463 <D5> (thread=Invocation:Management, member=3): Service Mana
gement joined the cluster with senior service member 1
2009-11-05 11:57:23.759/11.326 Oracle Coherence GE 3.5.2/463 <D5> (thread=TcpRingListener, member=3): TcpRing: connectin
g to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=4168,localport=8089]}
SafeCluster: Name=cluster:0xD3FB
Group{Address=224.3.5.2, Port=35463, TTL=4}The previous output shows that this Coherence console (the client side) has already joined the JPA server.
But the following output shows us that this console cannot access the Employees cache and cannot get the object entry. Why?
Map (?): cache Employees
2009-11-05 12:11:41.653/869.220 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=3): Loaded cache configuration
from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
2009-11-05 12:11:43.055/870.622 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache, member=3): Service Distribu
tedCache joined the cluster with senior service member 3
<distributed-scheme>

<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
    <local-scheme>
      <scheme-ref>example-binary-backing-map</scheme-ref>
    </local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
Map (Employees): list
2009-11-05 12:11:48.402/875.969 Oracle Coherence GE 3.5.2/463 <Error> (thread=main, member=3):
java.lang.RuntimeException: Storage is not configured
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
Storage(DistributedCache.CDB:9)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
uestTarget(DistributedCache.CDB:33)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendParti
tionedRequest(DistributedCache.CDB:31)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.size(Dist
ributedCache.CDB:13)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap$EntrySet.
size(DistributedCache.CDB:1)
        at com.tangosol.util.ConverterCollections$ConverterEntrySet.size(ConverterCollections.java:2720)
        at com.tangosol.coherence.component.application.console.Coherence.doList(Coherence.CDB:74)
        at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:442)
        at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
        at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)Edited by: jetq on Nov 5, 2009 12:18 PM

Health Service in which the location monitoring object is contained is not available

Hello,
When i am trying to discover new machines I am getting this error:
Health Service 'OPMGRRMS1.xxx.xxx.xxx.xxx' in which the location monitoring object is contained is not available
All services have been restarted successfully without error... on the RMS Server.
- System Center Data Access
- System Center Management
- System Center Management Configuration
- System Event Notification Service
but still having the error...
Date: 10/27/2009 10:14:00 AM
Application: System Center Operations Manager 2007 R2
Application Version: 6.1.7221.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.LocationMonitoringObjectNotAvailableException: Health Service 'OPMGRRMS1.ad.medctr.ucla.edu' in which the location monitoring object is contained is not available. Make sure that the computer hosting the Health Service is available and verify that the Health Service is running.
at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleSubmitTaskIndigoExceptions(Exception ex)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.AdministrationOperations.LaunchDiscovery(Guid batchId, List`1 jobDefinitions)
at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
DW works (Datawarehouse) I restarted the System Center Management successfully
MS works (2nd Management Server) I restarted the System Center Management successfully
ACS works (Audit Control Server) cannot access the reporting server but I restarted the System Center Management successfully
RMS DB 48 % Free
DW DB 18% Free
ACS DB 13% Free
I can ping the RMS Server what other test could I do?
I removed the new items:
Delete the six modules of Windows Failover Clustering Management Pack (SCOM Console > Administration > Management Packs > Right Click delete on it)
Uninstall System Center Operations Manager 2007 R2 Authoring Resource Kit (Add/Remove Programs)
Uninstall System Center Operations Manager 2007 R2 Authoring Console (Add/Remove Programs)
Reboot the RMS Server
SAME ERROR!!!
Any idea
Thanks,
Dom
Altiris Support / System Center Configuration Manager Support

Hi Marius,
In the Operations Manager Log I have some errors:
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:06 PM
Event ID: 4506
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Data was dropped due to too much outstanding data in rule "Microsoft.SQLServer.2008.LoginsPerSecCollection" running for instance "MSSQLSERVER" with id:"{24345584-0FD5-0FAB-2293-D4C82BEDB086}" in management group "SCOM-MED".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">4506</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:06.000Z" />
<EventRecordID>4126486</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>Microsoft.SQLServer.2008.LoginsPerSecCollection</Data>
<Data>MSSQLSERVER</Data>
<Data>{24345584-0FD5-0FAB-2293-D4C82BEDB086}</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126487</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectEventData", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126488</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectEventData</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126489</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData</Data>
</EventData>
</Event>
these errors are recurrent...
the RMS is doing yoyo between Green as healthy and grayed out under Monitoring > Windows Computers or Administration > Device Management > Management Servers (2-3 minutes green then grayed out) there is no event in the Windows Event Log as System Center Management service remains running...
This MP for the Data Warehouse Internal Library has been removed and restored two weeks agao with Premier Support as the RMS was already fleaky and doing gray-green...
I have tried again but I will need to check again as it seems these errors are pointing to the Data Warehouse Library and not only the Data Warehouse Internal Library Management Pack. The main problem with this is that the Data Warehouse Library is [b]94[/b] Management Packs which depends on this Data Warehouse Library in our environment so if I need to remove this one it is almost a complete reinstallation of 50% of our MPs :(
Heartbeat failures: The Heartbeat State view ( Health Service Watcher (Agent) - All) is giving me 10 Critical and 1 Warning
[b]Any way to delete All MPs and restore them at once?[/b]
I have an issue trying deleting "Notifications Internal Library":
The User does not have sufficient permissions to perform the operation"
I am using my own account which is supposed to have all accesses.
I tried the hotfix 938510 but it does not seem to apply to SCOM R2
Thanks
Dom
Altiris Support / System Center Configuration Manager Support

Separate App Module, View Object based on Select not EO: Best practice?

Hi,
I have a list of base tables(parameters) that are used everywhere in my application for selection components (List, Combo, Radio).
I'm considering creating a separate app module with a view object based on query for each table.
I have created a BaseTableAM application module for managing those tables, Entity objects and View Objects in update mode.
Those tables are rarely changed.
Example of table:
ItemType
item_type_id = primary key
name = description
In the BasetableAM:
ItemTypeEO entity object
ItemTypeVO updateable view object based on related entity object.
Now in my project I will create combo boxes for selection of the item_type_id.
Separate application module:
SelectionViewAM composed of View Objects based on Select statements and not on Entity Objects.
Example of view object ItemTypeViewVO:
SELECT ItemType.ITEM_TYPE_ID,
ItemType.NAME
FROM ITEM_TYPE ItemType
All view objects in this application module will be read-only and for selection only.
By basing all those View Objects on select statements not based on Entity Objects I suppose there will be no locking and "value changed" management => less overhead.
Is this a good practice?
Being read-only I could have based those View Object on Entity Object with flag updateable set to no, what would you recommend?
By creating a separate Application Module for those selection view objects, I know that update will not be possible.
Thank you for your advice.
Frederic

See this article for View Object tuning tips:
http://www.oracle.com/technology/products/jdev/tips/muench/voperftips/index.html
Are you planning to use this AM as a nested AM inside other application modules?
If you don't the "selection AM" will have its own, separate database connection/transaction.
If you do, it will share connection, transaction with its containing "root" AM.
It may not be relevant to your application, but just realize (which is explained in the article I point to above) that view objects that are not related to entity objects do not "see" pending changes in the current transaction. That feature depends on the VO/EO cooperation. It's fine to build VO's without an EO -- in fact we've made it easier to do this in 10.1.2 in the Design Time wizards -- but you just want to make sure you realize what features it's giving up. If you don't need those EO-related features, then by all means create an Expert Mode VO that's not related to EO's.

ZSAPLINK for Object type = CLAS is not working

Dear Experts,
ZSAPLINK for Object type = CLAS is not working. On executing by selecting Export Object to Slinkee with Object type = CLAS and class name, It is giving the dump which is shown in below snapshots. Pls guide me how to resolve this error.
Thanks
KH

From the screenshot, It seems that the object _renderer did not point to any memory location.
You can verify this by putting a breakpoint in method IF_IXML~CREATE_RENDERER of class CL_IXML
If the return value RVAL is initial, this mean there something wrong with the kernel module abkm_iXML_CreateRenderer. If it is, you will have to check with your Basis team to apply some kernel patches.
Hope it helps. Cheers!

New IE object fix makes flash not show in other browsers

I have a page containing a flash movie. When I open the html
page in Dreamweaver, it gives me a message saying 'this page
contains <object> tags that may not work properly in the most
recent versions of Internet Explorer. To correct this problem, you
can convert these tags to browser-safe scripts. Do you want
Dreamweaver to convert these tags for you?
However, when I do this, my flash movie does not show up in
my browsers (mac Firefox and/or Safari).
What do I need to do to correct this?

If you had js errors turned on in your IE, then when you
opened this first
link, you would see an error on line 16, stating "Object
expected". This
means that IE is not finding your referenced function -
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http
on the page. This happens because this file -
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
has not been uploaded. Please upload the Scripts folder and
you will see
things begin to work.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Jonibean" <[email protected]> wrote in
message
news:elv77f$di1$[email protected]..
> Sure, the page is at:
>
>
http://www.amandaforsyth.com/dynamictest2.html
>
> The regular code (that flash creates) is at:
>
>
http://www.amandaforsyth.com/dynamictest.html,
which works fine.

Message no. B1402- Table KONP for object class COND_A is not defined.

Hi
I m using BD52 transaction for message type COND_A and am getting this error for table KONP saying it is not defined for COND_A.
Can you please let me know which transaction is used to update this information.
Thanks in advance
Sana

In note 309342, for error message no.B1402, following solution is given.
Solution
The system issues warning message B1402 " Table KONP for object class COND_A does not exist" for each entry with table KONP and you can ignore this by pressing Enter respectively. Then you can maintain the entries or navigate.
If the KONP entries bother you since you use Transaction BD52 frequently, you can remove them manually. To do this, you can also use Transaction BD52. The functions are not changed by this deletion. However, the issue of the bothering warning message is suppressed. Table TBD62 is client-dependent that is, you have to make the correction on each active client.
A related problem exists with table TBD22. During the setup of reductions (that is, new output types which only send a subset of the data of output type COND_A), the corresponding entries in table TBD62 (Transaction BD52) are generated from table TBD22. To avoid the same problem as described above with the new output types, remove the entries of TBD22 with MESTYP COND_Y and CDTABNAME KONP. You can do this with the help of view V_TBD. Transaction SM30, as an output type, select COND_A. Here, remove all entries with segment type EKONP and table name KONP.
Table TBD22 is client-independent.
A correction of tables TBD22 and TBD62 by means of an R/3 Support Package is not possible since the tables have delivery classe 'G'. SAP cannot delete entries in the tables.
thanks
G. Lakshmipathi

Object names (object prefix + ID) must not exceed 40 characters?

Similar Messages

Maybe you are looking for