Object not added to the Transport Request
Hi,
We have a z-tcode thats a replica of SPAD for creating printers.
Once the printer is created, a prompt asks for creating a new Transport request(TR in short) and once the TR gets created, the printer finally gets attached to this TR.
This tcode works fine in 4.6 version. But not in ECC6.0 version.
In ECC6.0, the TR gets created and the printer too is created but its not attached to the TR.
I checked the codes in both the versions but could not find any difference between them.
One thing I noticed that the statement CALL transaction... within one of the sub routines(that adds the printer to the TR) has a parameter for message and it doesnot get populated with any entries,
while it does in 4.6 version.
Please suggest.
Regards,
Binay.
Hi,
In debug mode try passing the same message & check whether it works.
if yes, then you may hardcode the same.
Best regards,
Prashant
Similar Messages
-
Objects did not added to the transport request
Hi team
Pls advise, I've been trying to create a transport for some workschedules in client DDD.
But although I've created a transport and saved it, when I look at the transport or task, there's no objects saved in it. For the other clients BBB, CCC, when I do the same process, I would see the table T552a in the transport task and the list of entries generated. But in client DDD, it is always blank.
Can you please tell me how to investigate this issue.
Regards
Bhaskar
Edited by: bhaskar1818 on Dec 10, 2008 10:04 AMYou can manually add the object into that transport request number. Login into client DDD and go to SE01 -- Select the request-- go to Request/Task- object list - include objects- freely select object.
The reason could be behind this that transport request has been not allowed for the client DDD, if i understand correctly the problem
Regards
Subhash -
When is the entire function group added to the transport request
When you modify a functionmodule in a function group, only the object of the functionmodule( LIMU FUNC) is added to the transport request.
When you modify an include of the function group, the reportsource of that include (LIMU REPS) is added to the transport request.
But under some circumstances the entire function group is added to the transport request (R3TR FUGR).
Can somebody clarify under what circumstances the entire Function Group is added to the transport request?I was actually looking for the reason why I would find R3TR FUGR objects in requests for existing function groups.
What I found out is that R3TR FUGR is added to the request when :
- the function group is created
- a function is renamed
- the function group is deleted
- you choose : Write Transport Entry, in the context menu of the Function group.
The <b>actual problem </b> was that in our upgraded system (<b>ERP2005</b>) we had a transport containing the function group (R3TR FUGR) and <b>we thought</b> none of these actions had been taken. After talking to the developer in question, I found out he did rename a function module, so I have my solution.
But thanks everybody for the insight.
Message was edited by: Dries Horions -
Function Module not being displayed in the Transport Request
Hi,
I Created a FM "RH_ACTIVATE_WFOBJECT_AFTER_IMP" in my SAP System. After I created due to problem in editing I have deleted the FM and also deleted it from the request.
I have re created the function module and if I see the object directory entry I find the following
Identical request locks
Request User Task/request Object
**** ***** R3TR FUGR RHWS
In the request I cannot find the function module but only the function group. Please help me to get my function module visible in the transport request.Hi ,
When your creating the FM for first timw with new FGRP then no need to worry .
You can see only the FGRP in the transport request number and when you move this transport request to further systems your FM automatically transport with the FGRP.
Next time when your creating a new FM under the FGRP which is already moved to production you can see only your FM name under the transport request.
When you go to FGRP main program by follwing the path
FGRP -> Disply FGRP in SE37 you can see the main program of the FGRP there if you see one include with TOP and XX .
double click on the XX Include.
there you can see allthe FM under that FGRP.
Thanks
Naresh -
Identify the transport request for released Objects from BW(any BW Object)
Hi
How do i identify the transport request in which i have collected the BW Object(Say Transfer rule) which got released to the testing system.
Please guide me.
Thanks,
SatyaHi Satya,
Just follow these steps,
1)Go to the Update Rule and Double click on the Rule.
2)Click on Extras->Object Directory Entery>In hte Heading u can c Object.
3)This Objectr has Detials>R3TRUPDR-->Tech Name of Update Rule
4)Come to SE03
5)Come to Eiight Row-8 and Enter UPDR in the 3 Column adn the Tech Name in the 4 Column,TICK it and Execute
Now it will display when and all it gpot transported.
Similarly u can do it for Objects like MPRO for Multiprovider,ODSO for DSO,ETC
Rgds
SVU123
Edited by: svu123 on Dec 10, 2009 12:05 PM -
Changing the Transport Request of an Object(Report)
Hi,
By mistake I have saved one of my Custom Transaction Code( of a custom Report) under wrong Ttransport Request Number.
Could you please let me know the procedure to change the Transport Request number of any object like Report, TCode etc.
Regards,
NitinHello,
Delete that perticular object from the request.
And save that object again , so , system will ask you for the request again.
Regards,
Naimesh -
Which version of an object is included in a transport request
Hi experts,
I have one doubt regarding the transport requests and the object versions included in it.
We've found in one development that there are differences between the development system and the productive system and all the transport requests, which include this object, have been transported to production.
The transport requests were transported in the following sequence:
Order number Date Time
1. D01K904477 29.03.2007 17:41:52
2. D01K904511 30.03.2007 17:21:54
3. D01K904425 30.03.2007 17:51:36
The last order transported contains a previous version of the object.
From my own experience in other projects I'm not sure whether the transport system it's well configured or not. I have the idea that the transport requests always include the last version of the object transported. Probably, it depends on the transport routes... But I'm not sure.
Any help would be highly appreciated.Thank you for your answer Juan.
This is clear. But my doubt is not solved yet.
I'm referring to the versions included in an older transport request.
In our system If we transport a previous transport request to production, the latest version of the object is overwritten.
E.g.:
TR 1 Date: 01/01/2007 (DD/MM/YYYY) First version of the program
TR 2 Date: 01/03/2007 (DD/MM/YYYY) Second version of the program
1. We transport TR 1 to production.
2. We transport TR 2 to production. We have the last version of the program in production.
3. If we create transport request TR 3 and we include the object in this TR, this TR will include the active version of the object.
4. If we transport TR 1 to production, latest version is overwritten. <b><<<< This happens in our system.</b>
We don't know if this is happenning due to the transport routes configuration.
Thanks in advance. -
Problem while creating the Transport Request in BI Development.
Dear Friends,
We are trying to transport the objects from BW Development System to BW Production system. We are using the Path RSA1-> Modeling -> Transport Connection.
In Transport Connection i selected grouping "Only necessary objects" and later i selected the ODS object into right side panel (Transport Area), by default it showed as $TMP package, to change the Package into our own package we clicked on Package pushutton. It popup a screen "Select Objects for Changing Package" here we selected all and clicked on OK button and it asked for the new Package name where we specified our own package name (ZBIW) and clicked on save button and it got save after changing the package name we selected all the objects and clicked on the Transport pushbutton but it did not asked for a request id and we got the following message.
Error/Info Message:
Edit objects separately since they belong to different original systems.
Choose 'Display object' or 'Cancel'.
Please give us your valuable input for our issues.
Thanks in Advance.
Regards,
Akash.Hi,
find the Objects for which the system is creating this error from the error messages.
And then search for those objecs in the collected objects ,in right hand side screeb of Transport connector. you can find them two times ticked.And then remove tick mark for one .So that. you are making tick mark for only one time for those objects.
with rgds,
Anil Kumar Sharma .P -
Program to Track the Transport Request
Hi Experts,
I got a requirement to write a program which can track and compare the Transport Request between the servers(Development ,Test and Production) .
If in case is there any descrepancy between the versions (In the server) it should throw an error saying that particular thing is missing or not synchronized.
For ex: If the program which is in Development server has some structure dependent to the code which is address to single TR.
where as same version of the program in Test don't have structure ,it has to throw an mismatch error.
If you guys have any clue on this please throw some light.
Higher points will be rewarded for every useful inputs.
Thanks in Advance,
DharaniHi Dharani,
Some sample Code. This I got debugging the SAP Standard.
TYPE-POOLS: strhi.
Data varaints for remote compare
INCLUDE rvscdcom.
INCLUDE rsvcutct. "Utilities, Constants, Types
INCLUDE rsvcvcct. "General Constants Types
INCLUDE rsvcvdct. "VRSD Constants Types
INCLUDE rsvctrct. "Tables for transports details
INCLUDE rsvcditd.
INCLUDE ole2incl.
DATA: application TYPE ole2_object.
DATA: remote_info_line LIKE abaptext-line,
remote_info_line_a LIKE vrsinfolna,
remote_info_line_b LIKE vrsinfolnb,
remote_versno LIKE vrsd-versno,
remote_objname LIKE vrsd-objname,
remote_objtype LIKE vrsd-objtype,
remote_system LIKE tadir-srcsystem,
returncode LIKE sy-subrc.
DATA: srcsys LIKE tadir-srcsystem,
author LIKE tadir-author,
mslang LIKE tadir-masterlang,
devcla LIKE tadir-devclass,
notfnd LIKE bool.
INCLUDE rsvceudb.
INCLUDE rsvcvdtd. "VRSD Constants Types
INCLUDE rsvctrtd. "Tables for transports details
INCLUDE rsvctrfo. "Interface for transport details
INCLUDE rsvcrmck. "Remote Access Utilities: Checks
PERFORM get_rfc_destination USING srcsys
CHANGING w_destination1.
SELECT SINGLE objname objtype korrnum FROM vrsd
INTO CORRESPONDING FIELDS OF it_transports
WHERE objname = it_abap_hdr-obj_name
AND objtype = it_abap_hdr-object
AND versno = '00000'.
it_transports-trkorr = it_transports-korrnum.
Open tranport number with object name
SELECT SINGLE trkorr pgmid object obj_name FROM e071
INTO CORRESPONDING FIELDS OF it_transports
WHERE trkorr = it_transports-trkorr
WHERE trkorr NE 'SW3_P00001'
WHERE pgmid EQ it_abap_hdr-pgmid
AND object EQ it_abap_hdr-object
AND obj_name EQ it_abap_hdr-name
AND lockflag EQ 'X'.
Open tranport number with object name
SELECT SINGLE as4user as4date FROM e070
INTO CORRESPONDING FIELDS OF it_transports
WHERE trkorr = it_transports-trkorr.
Remote compare
IF p_rcomp = 'X'.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
text = 'Remote Comparison started'.
IF w_destination1 NE space.
PERFORM remote_compare USING w_destination1.
IF it_transports-korrnum EQ it_transports-trkorr.
it_abap_hdr-in_qa = 'Same version'.
ELSEIF it_transports-korrnum IS INITIAL.
it_abap_hdr-in_qa = 'Not found'.
ELSE.
it_abap_hdr-in_qa = 'Not Same version'.
ENDIF.
MODIFY it_abap_hdr.
ENDIF.
FORM get_rfc_destination USING pi_orgsys
CHANGING po_destination.
Baustein zur Auswahl von R/3-Destinationen.
FUNKTION(EN):
ruft einen FB, der den Anwender eine Destination für den
Aufruf der Versionsverwaltung als REMOTE-Function-Call
auswählen läßt.
Parameter:
PI_ORGSYS LIKE TADIR-SRCSYSTEM
PO_DESTINATION LIKE RFCDES-DESTINATION
DATA: dest_note(60). " für STRA Baustein
IF pi_orgsys = space.
po_destination = space.
dest_note = space.
ELSE.
IF pi_orgsys <> sy-sysid.
po_destination = pi_orgsys.
ENDIF.
CONCATENATE
'Note: The original system of the object is the system'(l11)
pi_orgsys INTO dest_note SEPARATED BY space.
CONCATENATE dest_note '.' INTO dest_note.
ENDIF.
CALL FUNCTION 'SVRS_GET_RFC_DESTINATION'
EXPORTING
p_text = dest_note
IMPORTING
remote_dest = po_destination
EXCEPTIONS
no_destination = 1
OTHERS = 2.
IF sy-subrc <> 0.
Falls keine Destination ausgewählt wurde:
po_destination = space.
ENDIF.
ENDFORM. "get_rfc_destination
INCLUDE LSVRLF07 *
FORM get_version_list_remote USING pi_objtype pi_objname
CHANGING po_no_entry.
DATA: old_state LIKE bool.
REFRESH: vrs_dir_vrs, logvers_dir.
PERFORM check_vc_state_remote CHANGING old_state.
IF old_state = true.
PERFORM get_old_fashioned_versdir USING pi_objtype pi_objname
CHANGING po_no_entry.
ELSE.
CALL FUNCTION 'SVRS_GET_VERSION_DIRECTORY_46'
EXPORTING
destination = dir_destination
objname = pi_objname
objtype = pi_objtype
TABLES
version_list = vrs_dir_vrs
lversno_list = logvers_dir
EXCEPTIONS
no_entry = 1
system_failure = 2
communication_failure_ = 3.
CASE sy-subrc.
WHEN 0.
po_no_entry = false.
WHEN 1.
po_no_entry = true.
WHEN 2.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 3.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
ENDIF.
ENDFORM. "get_version_list_remote
FORM CHECK_VC_STATE_REMOTE *
FORM check_vc_state_remote CHANGING po_old_state.
DATA: head_entry LIKE vrsd.
PERFORM get_vrsd_entry_remote
USING head_type head_objname head_versno
CHANGING head_entry po_old_state.
ENDFORM. "check_vc_state_remote
FORM GET_VRSD_ENTRY_REMOTE *
FORM get_vrsd_entry_remote USING pi_objtype pi_objname pi_versno
CHANGING vrsd_entry po_no_entry.
CALL FUNCTION 'GET_VRSD_ENTRY_46'
EXPORTING
destination = dir_destination
objname = pi_objname
objtype = pi_objtype
versno = pi_versno
IMPORTING
vrsd_entry = vrsd_entry
EXCEPTIONS
no_entry_found = 1
system_failure = 2
communication_failure = 3.
CASE sy-subrc.
WHEN 0.
po_no_entry = false.
WHEN 1.
po_no_entry = true.
WHEN 2.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 3.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
ENDFORM. "get_vrsd_entry_remote
FORM GET_OLD_FASHIONED_VERSDIR *
--> PI_OBJTYPE *
--> PI_OBJNAME *
--> PO_NO_ENTRY *
FORM get_old_fashioned_versdir USING pi_objtype pi_objname
CHANGING po_no_entry.
DATA: vrsd_entry LIKE vrsd.
DATA: object_not_found LIKE bool.
PERFORM get_vrsd_entry_remote
USING pi_objtype pi_objname null_versno
CHANGING buffer0 po_no_entry.
IF po_no_entry = false.
CALL FUNCTION 'GET_VERSION_LIST_46'
EXPORTING
destination = dir_destination
objname = pi_objname
objtype = pi_objtype
TABLES
version_list = vrs_dir_vrs
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
SORT vrs_dir_vrs DESCENDING BY versno.
LOOP AT vrs_dir_vrs.
logvers_dir-versno = vrs_dir_vrs-versno.
APPEND logvers_dir.
ENDLOOP.
READ TABLE vrs_dir_vrs INDEX 1.
IF vrs_dir_vrs-versmode = impt_mode.
Es gibt einen offenen Import, setze Flag zurück:
vrs_dir_vrs-versmode = corr_mode.
ENDIF.
vrs_dir_vrs-versno = 0.
MODIFY vrs_dir_vrs INDEX 1.
ENDIF.
vrsd_entry = buffer0.
PERFORM add_active_version_remote
CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
po_no_entry = false.
ENDIF.
Möglicherweise gibt es eine überarbeitete Version.
PERFORM add_modif_version_remote
CHANGING vrsd_entry object_not_found.
IF object_not_found = false.
po_no_entry = false.
ENDIF.
ENDFORM. "get_old_fashioned_versdir
FORM ADD_ACTIVE_VERSION_REMOTE *
--> VRSD_INFO *
--> PO_NOT_FOUND *
FORM add_active_version_remote CHANGING vrsd_info STRUCTURE vrsd
po_not_found.
DATA: object_not_found LIKE vrsd-versmode.
DATA: nplus1 LIKE vrsd-versno.
DATA: retcode LIKE bool.
CALL FUNCTION 'FIND_OBJECT_40'
EXPORTING
destination = dir_destination
objname = vrsd_info-objname
objtype = vrsd_info-objtype
IMPORTING
object_not_found = object_not_found
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE. " SY-SUBRC.
IF object_not_found = space.
po_not_found = false.
ELSE.
po_not_found = true.
ENDIF.
CLEAR: vrsd_info-korrnum, vrsd_info-author,
vrsd_info-datum, vrsd_info-zeit.
IF po_not_found = false.
IF vrsd_info-versmode = impt_mode.
Es gibt einen offenen Import, und einen Satz n+1 der
uns verschwiegen wurde. Er beschreibt die aktive Version
nplus1 = vrsd_info-lastversno + 1.
PERFORM get_vrsd_entry_remote
USING vrsd_info-objtype vrsd_info-objname nplus1
CHANGING vrsd_info retcode.
ELSE.
PERFORM get_korrinfo_remote CHANGING vrsd_info.
ENDIF.
MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
vrs_dir_vrs-versno = null_versno.
logvers_dir-versno = acti_versno.
INSERT vrs_dir_vrs INDEX 1.
INSERT logvers_dir INDEX 1.
ENDIF.
ENDFORM. "add_active_version_remote
FORM ADD_MODIF_VERSION_REMOTE *
FORM add_modif_version_remote CHANGING vrsd_info STRUCTURE vrsd
po_not_found.
DATA: mod_dd_exists LIKE vrsd-versmode.
CALL FUNCTION 'TEST_MOD_DD_40'
EXPORTING
destination = dir_destination
objname = vrsd_info-objname
objtype = vrsd_info-objtype
IMPORTING
mod_dd_exists = mod_dd_exists
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
IF mod_dd_exists <> space.
po_not_found = false.
PERFORM get_korrinfo_remote CHANGING vrsd_info.
MOVE-CORRESPONDING vrsd_info TO vrs_dir_vrs.
vrs_dir_vrs-versno = modi_versno.
logvers_dir-versno = modi_versno.
INSERT vrs_dir_vrs INDEX 1.
INSERT logvers_dir INDEX 1.
ELSE.
po_not_found = true.
ENDIF.
ENDFORM. "add_modif_version_remote
FORM GET_KORRINFO_REMOTE *
FORM get_korrinfo_remote CHANGING vrsd_info STRUCTURE vrsd.
CALL FUNCTION 'GET_KORRNUM_AUTHOR_DATUM_40'
EXPORTING
destination = dir_destination
objname = vrsd_info-objname
objtype = vrsd_info-objtype
IMPORTING
author = vrsd_info-author
datum = vrsd_info-datum
korrnum = vrsd_info-korrnum
zeit = vrsd_info-zeit
EXCEPTIONS
system_failure = 1
communication_failure = 2.
CASE sy-subrc.
WHEN 1.
'Fehler im Zielsytem'.
MESSAGE W123.
LEAVE.
WHEN 2.
'Keine Verbindung zum Zielsystem'.
MESSAGE W124.
LEAVE.
ENDCASE.
IF vrsd_info-korrnum <> space.
Korrektur ist offen, Zeitstempel korrigieren:
vrsd_info-datum = sy-datum.
vrsd_info-zeit = sy-uzeit.
ENDIF.
ENDFORM. "get_korrinfo_remote -
To delete the transport request.
when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
Thanks
SatishHi..
Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
Regards,
Debjani.. -
How to find the transport request........
Hi,
For particular info object I want to see the transport request
by which it has been locked.
Is there any way to find the transport request by giving the
object name ? (Not by SE10 , where we already knows the trnsport request)
Thanks,
JeetuHi,
I will add one more option.............
In RSA1, goto Transport Connection. There Select your info object, drag and put on right side. Here you can see all the details (Last Changed by, Transport No, Package Name, etc......)
Hope this helps...........
Vivek -
Doubt in creating the transport request for "STANDARD TEXT""
HI ALL,
i used the standard text in scripts but i am getting the problem while creating the transport request for that,
i am not able to create the transport request for that,if anybody knows plzlet me know,
this is very urgent,
thanks and regards,
saikrishna.HI SURESH ,
THANKS FOR UR IMMEDIATE REPLY ,
i executed that report in that i have given
Name of Correction : ZREPST
Textkey-object:
Text key name:
Text key - ID: ST
Text key - language :EN
Here Textkey-object,Text key name
wat i have to ,give after that ,can i execute that ,
will it create the request.
plz let me know,now ur answer is very valueble ,because ,now i have to release everything,
plz let me know immediately,
thanks and regards,
saikrishna. -
Objects not included in a transport !!
HI,
I create 10 objects. Include all of them in say 5 different requests. I delete 5 objects from these requests (just from the request).
How can I find out the list of objects in the system which do not have an associated transport request !! This wil help me to analyze whether they r really not needed and can be deletd physically alltogether or they are deleted by mistake from the transport !!
thksHello
To be honest your requirements are somewhat weird. Why?
Example1: You create a new object from scratch resulting in an entry in the transport request. You realize that this object is obsolete and you delete it again. The entry in the transport request still remains.
Example2: You change an existing object resulting in an entry in the transport request (the object is fully functional in the productive environment). You realize that the change was wrong. You undo the changes and delete the entry from the transport request.
Conclusions:
1) Entry in transport request exists but not the corresponding object -> deleted by mistake??? NO.
2) No entry in transport request but object exists -> obsolete object ??? NO.
If you want to find out which objects are currently locked in transport requests then you should have a look at DB table TLOCK.
As long as an existing object is part of a changeable transport request you should find a lock entry there.
Regards
Uwe -
Not able to import transport request in A66
Hi Expert,
I have done an amendment via t.code OBR3 in N66 so created a transport request. I went to SE01 to release the transport request and I saw the status is released and the is a warning message "Import steps not specific to transport request". I logged on to A66 and go to STMS_IMPORT but I could not find my transport request to import it into A66. Did I missed out anything? Have I done anything wrong?
Kindly advise.. thankshi
sometime it happens recreate the transport request and try to re-import it may work. -
How to track the transport request number for the Role/Composit Role
Hi,
How to track the transport request number for the Role/Composit Role.
Thanks,
RaviUse transaction SE03 Transport Organizer Tools
Execute "Search for Objects in Requests/Tasks" with objects of types:
R3TR ACGR Role
R3TR ACGT Role - User assignment
Regards
Maybe you are looking for
-
I'm raising this question again: IDOC sender info
in an IDOC to file scenario, i m sending an IDOC from a SAP system, for doing so, i m triggering the IDOC from we19(picking IDOC no. of an already sent IDOC from we05), Now, in the EDIDC of the IDOC, i give the port/partner no. of the receiver, now t
-
Help i accidently got my iphone in water
hello, i accidently got my iphone in water. i pulled it out immediately but the apple logo is still flashing. please hope i didn't break it!
-
File Browser/Library window wont appear
My file browser/ library window won't appear, it's gone? I tried checking and unchecking them under the window pull down menu.No Luck. I have all the latest updates Anyone have any ideas? THX
-
Can workbook be published in portal. What is the procedure to create iview.
-
Opening print dialog box with "Selection" printing enabled
Hi all, I have a JTable in which I wan to print only selected rows. When I open the Print dialog box using printDialog() method of PrinterJob, the dialog opens with "Selection" option disabled. How can I enable this option ? How can I print my select