Object not known in CO (IAOM 028)

Hi,
I'm facing a problem with the Settlement Type Prepayment in SAP CRM 2007.
Here you can find the error message:
Object not known in CO (IAOM 028):
"You want to post to the object with technical key belonging to the business scenario . However, there is no Controlling object assigned to this object"
I've read from some forums that BAdIs can be implemented in order to avoid this control, but my question is: without implementing BAdIs, where can I assign the missing Controlling Object?
In CRM? In ECC?
Thanks in advance,
Andrea Ricci

Hi Chandra,
I've the same problem. I've checked the notes and all the settings provided in them are correctly set up in my CRM system.
Can you suggest another kind of solution?
Points if helps,
thanks a lot,
regards,
A.

Similar Messages

Note oss 994326 - IAOM 028 Object not known in CO

Hi,
i would use note 994326 - IAOM 028 Object not known in CO
to clear the field EXT_OBJECT_ID, but the changing parameter C_GL_ACCOUNT is the field (type BILL_ACC_ACGL09-GL_ACCOUNT )e not the structure (type BILL_ACC_ACGL09).
Can any one help me about the modify badi?
Thanks
Raffaella

Hi Chandra,
I've the same problem. I've checked the notes and all the settings provided in them are correctly set up in my CRM system.
Can you suggest another kind of solution?
Points if helps,
thanks a lot,
regards,
A.

Transfer Billing document to accounting, Error: 'Object not known in COu2019

Hi all,
I have created an acquisition contract and subsequently created a billing document in CRM but when I try and transfer this to accounting, the system displays error message IAOM028 u2013 u2018Object not known in COu2019. My account assignment category on the contract is EROBJ u2013Profitability Segment CO-PA, however I have tried creating acquisition contracts with other account assignments but the same error occurs, even though the controlling object exists in SAP ERP. Iu2019ve searched the SAP notes and I did see note 683886, but this affected release 4 and we are working with release 7. Any help or advice in resolving this error would be much appreciated.
Alternatively how do I mark the item category as not relevant to CO? For now itu2019s not imperative that I post to a controlling object? The SAP help portal refers to selecting (or in my case deselecting) the Service setting in the Assign BW/CO fieldu2019 but I canu2019t find this field on the item category. Any advice again would be greatly appreciated.
Many Thanks
Lee

Hello,
The reason might be the transfer error, is due to the incomplete distribution of the order/contract to R/3 account assignment table IAOM_EXT_OBJ_INF.
For your invoice, check entry for document number/item number. It might be missing and if so, system shows error message as you mentioned.
If entries are missing, then the order/contracts need to be re-distributed to R/3, so that the entries are created for these missing items in the IAOM tables. The transfer process then will complete missing entries successfully.
To re-distribute to R/3, the respective document needs to be save after making a change in the document. Unless there is a change in the document, the re-distribution will not happen.
I hope this information may helpful to solve your issue.
Regards,
Harshad Patel.
Edited by: Harshad Patel on Jan 27, 2012 8:20 AM

Field name not known   in old existing report.

We have a report that we have used for a long time and has always been fine. Today when we open it it says data will be lost because "Field name not known".   So you click ok and look at the report in design and the report is missing a bunch of fields. You look at the Field Explorer and it only shows the first field in the table. This report links 2 tables. The linking field is the first field in both tables.
I try to re-map datasource and no luck.   I close Crystal, open Crystal and create a new report, look at the same tables and all of the fields are there. Create similar report looking at same datasource, same tables, some of the same fields, and it works fine.
What is wrong with the original report and why won't it connect or show fields?

It may be that the report file became corrupted. Do you have a back up of that report anywhere? If not you could create a new report using the same tables and links and then have both new and old reports open and copy objects from the old report to the new report. Save it and then verify it all works as it should and replace the old report with then new report. Copy the old report somewhere safe also.
Thank you
Don

PP_ORDER Archive Class AR_GPD to be registered is not known

Hi Experts,
I am doing PP_ORDER archiving,but i am getting this error log,
Job started
Step 001 started (program PPARCHA1, variant PP_ARCH, user ID VEEMA)
Archiving session 000009 is being created
Class AR_GPD to be registered is not known
Job cancelled after system exception ERROR_MESSAGE
i think,need to create AR_GPD class in ACLV,for that i need Structure and Standard package Name...
Thanks and Regards,
Veera.

Summary
Symptom
You are on SAP ECC 6.0 or ECC 7.0 (ERP2005 or ERP 2007). You don't use the industry solution GPD ('Grouping, Pegging, Distribution'). When you try to archive the object PP_ORDER or MM_EKKO, the pre-processing job completes fine, but the write job fails with the error: "Class AR_GPD to be registered is not known".
Other terms
archiving RM06EW47 WRONG_ACCESS_TO_ARCHIVE PP order delete
Reason and Prerequisites
The reason is missing customizing entries.
Solution
Please make the following changes in customizing/configuration:
[1] Transaction ACLA:
You need to add a new entry as follows:
Class    Description                    Function Group
AR_GPD    GPD Object Archive Class        AGPD
[2] For this archiving class, you need to define the "Tables to be Archived" as follows:
Structure        Do not delete
PEG_TACTASS       check
PEG_TASS          check
PEG_TSTK          check
[3] For the archiving class, define "tables from Which You Only Delete Entries:
Tab. name
PEG_TACTASS
PEG_TASS
PEG_TSTK
[4] Transaction ACLA:
Class P_ORDER -> Archiving classes used: include AR_GPD.
[5] Transaction AOBJ:
Archiving object MM_EKKO: Archiving classes Used -> AR_GPD
Archiving object PP_ORDER: Archiving classes Used -> P_ORDER

Error: Fieldname not known Details: errorKind

Hi,
There is a strange problem while running an report in Crystal Reports Server.
I've build an report in Crystal Reports Designer 11.0.0.1282 and in the client it works just fine, no error message or so.. It's a quit simple reports that only has two sub-reports that are all using the same datasource.
After i installed / uploaded this report to the server there's this strange error message. The report doesn't work and this is the error message:
Error in file D:\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\nlw2k3cr02.reportjobserver\~tmp1268606e23173d6a.rpt: Error in formula <Record Selection>. '{swtickets.ticketstatusid} = 3 and ' This fieldname is not known. Details: errorKind
The field is in the database, so what's wrong...

The report is saved with the usual user cresidentials, and when i remove the sub-report it works just fine..
Do you have any suggestions what's the best way to upload a report to the server?

Language DE not known

Hi,
we have basic data in language DE available in the source system and extract this into BW. When calling the master data table of any info object in language DE it brings error TL080, which says that the language is not known in the system. The diagnosis says the language DE is missing in table t002, but it is there. Can anybody help please!?
Thanks in advance!

Hi,
we already talked to the basis team. German language package has been installed, headers and general language is in german, you can also log in in german... only problem is that basic data maintained in laguage DE in the source system is ignored during data load - with the already mentioned error that language DE is not known by the system - by the way, even this message is posted in german...
thanks

Invoke not known method in not known class.

Everybody,
I am confusing about loading, invoking a little-known class, method. 'Little-known' means, when
designing we don't know the existence of that class, method. The application'll know names of
class, method which are inputted by user (Those classes exist when the user input).
For example: look at 'Little-known' class: FutureClass. It has method notKnownMethod as below
package notnow
public class FutureClass extends now.KnownClass {
public void notKnownMethod() {
}and the application main class MainApp.
public class MainApp {
    public static void main(String[] args) {
      // these variable will be inputted by users
      // this is what we not known
      String className = "notnow.FutureClass";
      String methodName = "notKnownMethod";
      try {
        // create instance of the class
        // use the name inputted bye user
        Class futureClass = Class.forName("notnow.FutureClass");
        // get method in that class
        Method futureMethod = futureClass.getMethod("notKnownMethod", null);
        // and then invoke it -- Error dialog appears:
        // Prompt: "Java Virtual Machine Launcher"
        // Content: "Fatal excption occurred. Program will exit"
        // with exception throw: java.lang.IllegalArgumentException: object is not an instance of
        // declaring class. Point to next row.
        futureMethod.invoke(new now.KnownClass(), null);
        //futureMethod.invoke(new notnow.FutureClass(), null); -- No Error
        // but we don't know name of the class till user input it.
      }catch (Exception e) {}
}You may think it's reflection, but reflection uses the known object in the invoke method(like the tutorial http://java.sun.com/docs/books/tutorial/reflect/object/invoke.html ). So how to invoke a method of a class known in the future (bussiness rule or update) ?
Please help me out of this problem.
Thanks for advance
Liwh

Take a closer look at the tutorial.
To use a non-static method from the class, you must have an instance of the class. That means either calling one of the class' constructors or using the newInstance method to invoke the default no-args constructor.
Object instance = futureClass.newInstance();
futureMethod.invoke(instance, null);I will let you play with calling methods whose argument list you don't know...
And if you know all you FutureClasses will extend a particular CurrentClass, make CurrentClass abstract with a few abstract methods that you would use in FutureClass... It will make life a lot easier:
public abstract class CurrentClass {
//All the other stuff
public abstract void runPrimaryMethod();
//Then in FutureClass
public class FutureClass extends CurrentClass {
//Other Stuff
public void notKnownMethod () {
    //Stuff
public void runPrimaryMethod() {
    notKnownMethod();
//Then in main body
    CurrentClass instance = (CurrentClass)futureClas.newInstance();
    instance.runPrimaryMethid();Interfaces are also good for this.

ODI not able to detect primary/foreign keys from XML- user lacks privilege or object not found

Hi Guys,
Im trying to load an xml file with two entities address and employee as below. The topology reverse engineering everything works fine. Im even able to view the xml data in ODI, but when i try to load the data from these two entities joining by the schema primary keys and foreign keys which odi created on reverse engineering process for xml, im getting the below error. Im able to load data from one entity, error only occurs when i use the join odi creates internally to identify the xml components employee and address
XML File:
<?xml version="1.0" encoding="UTF-8" ?>
<EMP>
<Empsch>
<Employee>
<EmployeeID>12345</EmployeeID>
<Initials>t</Initials>
<LastName>john</LastName>
<FirstName>doe</FirstName>
</Employee>
<Address>
<WorkPhone>12345</WorkPhone>
<WorkAddress>Test 234</WorkAddress>
</Address>
</Empsch>
</EMP>
Topology: jdbc:snps:xml?f=C:/Temp/RR/Empsch.xml&s=Empsch&re=EMP&dod=true&nobu=false
Error Message:
-5501 : 42501 : java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
java.sql.SQLException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
    at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
    at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
    at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
    at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1232)
    at sun.reflect.GeneratedMethodAccessor65.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
    at $Proxy2.prepareStatement(Unknown Source)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
    at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:81)
    at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
    at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:70)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
    at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
    at java.lang.Thread.run(Thread.java:662)
Caused by: org.hsqldb.HsqlException: user lacks privilege or object not found: EMPSCH.EMPSCHPK
    at org.hsqldb.error.Error.error(Unknown Source)
    at org.hsqldb.ExpressionColumn.checkColumnsResolved(Unknown Source)
    at org.hsqldb.QueryExpression.resolve(Unknown Source)
    at org.hsqldb.ParserDQL.compileCursorSpecification(Unknown Source)
    at org.hsqldb.ParserCommand.compilePart(Unknown Source)
    at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
    at org.hsqldb.Session.compileStatement(Unknown Source)
    at org.hsqldb.StatementManager.compile(Unknown Source)
    at org.hsqldb.Session.execute(Unknown Source)
    ... 27 more
Please advice
Thanks
Revanth

Thats obvious from the xml file contents you have given here. In this xml file You have four complex type. Two of them are employee and address. However the employee doesnot have any relation with address as you have not added the relationship. Thats why its failing. Its not the fault of ODI.
Also I would suggest not to use auto generated dtd by ODI as you might face problem in future. For example the address type of XML has 8 attributes and 4 of them are not mandatory. That means each of your xml file may have attributes between 4 to 8. This is where ODI auto generated DTD fails.
XML Schema complexType Element
Thanks
Bhabani

ManagedAccounts.aspx Object not reference to object

SETUP: 2x SharePoint 2010 Servers (14.0.5130.5002); 1x SQL 2008 R2
I setup alot of managed accounts (about 10) and had them setup to automatically generate the new passwords. After doing this operation, i can no longer access the managedaccounts.aspx page. I get object not referenced to object. I read
a bunch of forums that said the farm account shouldn't be set to autogenerate passwords and it will cause the error. Next, what i did is setup a new AD account with static password and made it the farm account. I then deleted the old farm account
using powershell. However, even after doing this, i am still getting the same error. Any ideas? (everything else is working in the farm as far as i can tell.
04/12/2011 10:38:06.44 w3wp.exe (0x197C)                       0x1FB0 SharePoint Foundation
Runtime                       tkau Unexpected System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.ApplicationPages.ManagedAccountsDataSourceView.FillDataTable(DataTable table, DataSourceSelectArguments selectArguments)     at Microsoft.SharePoint.WebControls.DataTableDataSourceView.Select(DataSourceSelectArguments
selectArguments)     at Microsoft.SharePoint.WebControls.AdministrationDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments)     at System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments,
DataSourceViewSelectCallback callback)     at System.Web.UI.WebControls.DataBoundControl.PerformSelect()     at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()     at System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildContro...
04/12/2011 10:38:06.44* w3wp.exe (0x197C)                       0x1FB0 SharePoint Foundation
Runtime                       tkau Unexpected ...ls()     at System.Web.UI.Control.EnsureChildControls()
at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Control.PreRenderRecursiveInternal()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) a5dbe0de-bab0-48cc-9d99-9c094490a1f1

Here is another thread about this:
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010setup/thread/406f1817-d687-49d7-9691-26e487fb5577
However, none of suggestions worked for me. i can't reinstall our staging farm cause we are in the middle of a migration. I am probbably going to open a case with MS as it doesn't seem like anyone has any idea about the problem.

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

While Doing BW Role Uploading Getting message "Linked Objects Not Found" ?

Dear All,
I am trying to upload a BW role from EP , while doing role upoad activity, when I am giving role name, system namein the first step it is identifying the role from the system.
To that role four reports has been attached.
After uploading the role, the role has been get uploaded, but the reports which are attached to the role it is showing that "Linked Objects Not Found", for all the reports.
For all those reports I have checked the web url on BW server it is corect but then also I am getting above message.
Please any one help me out in this scenario.
Regards,
Aditya

The same problem during XI to BI integration as it was told in how-to.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

Hello Kewal,
Thank you for the details of the issue you are experiencing when trying to perform an update. I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first.
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thank you for using Apple Support Communities.
Best,
Sheila M.

While posting T.code VL02N "co object not found " what have to do

Hi
Friends..
while posting T.code VL02N "co object not found " what have to do
General Ledger related to Co object what i want todo.
showing error " Co Object not found"
Thank you.
Ashok kumar

Hi
Assign a cost centre to the cost element of the general ledger account specified.
Transaction KA02
another option is got OKB9 and assign cost center to GL account at company code level.
regards
Srinivas

BACKGROUND PROCESSING, REPORT NOT LOADING, "OBJECT NOT SET TO INSTANCE..."

Post Author: thecoffeemachine
CA Forum: .NET
I already posted this message in other Web sites, but I am almost getting crazy here and I need help:
HI:
The Web application I am testing was having several issues related to loading Crystal Reports. It was fixed and I do not know which of the 1000 things I did to fix it; but now it began, again, to have the same behavior after I had a conflict with another Web site that was in the same server.
The thing is that I had another virtual directory where resided a copy of the same Web app. for testing purposes/working with the Visual Studio. The reports were loading all fine, very fast, all perfect... And suddenly the assemblies of one Web site and the other began to "blend" together and..... well the same behaviors appeared again. I tried to copy the last stable backup and rebuild the Web app... but it did not work.
At the very first time that one requests the report, it shows without problem. At the second time it shows an error message related to "cannot submit to background processing", and sometimes "object not set to an instance.." ... and on the third time it just never shows up and the app. becomes unresponsive. I have to close the window and request the Web site again in another browser window. If I wish to see the report again I have to wait for hours until it shows it.
I am using Visual Studio 2003 and the Crystal Report version that was shipped with that Visual Studio version. I am working with Windows Server 2003 and SQL Server 2000. Below is the VB code:
    Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load             Me.SqlConnection1.Open()
       Me.SqlSelectCommand1.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandReferences.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandTextbook.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandObjectives.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandTopicData.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandCourseOutcomes.Parameters("@CourseCode").Value = Request.QueryString("CD")
        Me.SqlDataAdapterMainData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseSyllabusData")         Me.SqlDataAdapterReferences.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseReferenceData")         Me.SqlDataAdapterTextBook.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTextbookData")         Me.SqlDataAdapterObjectives.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseObjectivesData")         Me.SqlDataAdapterTopicData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTopicData")
Me.SqlDataAdapterCourseOutcomes.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseOutcomes")
        Dim myExportOptions As CrystalDecisions.Shared.ExportOptions         Dim myDiskFileOptions As CrystalDecisions.Shared.DiskFileDestinationOptions         Dim myExportFile As String         Dim myReport As New ABETFormat         myReport.SetDataSource(Me.DtsSyllabusCompleteData1)
        myExportFile = "C:UNTempPDF" & Session.SessionID.ToString & ".pdf"         myDiskFileOptions = New CrystalDecisions.Shared.DiskFileDestinationOptions         myDiskFileOptions.DiskFileName = myExportFile         myExportOptions = myReport.ExportOptions
        With myExportOptions             .DestinationOptions = myDiskFileOptions             .ExportDestinationType = .ExportDestinationType.DiskFile             .ExportFormatType = .ExportFormatType.PortableDocFormat         End With
        myReport.Export()
        Response.ClearContent()         Response.ClearHeaders()         Response.ContentType = "application/pdf"
        Response.WriteFile(myExportFile)         Response.Flush()         Response.Close()         System.IO.File.Delete(myExportFile)         Me.SqlConnection1.Close()
    End Sub
I already have tried moving the Crystal Reports dll´s to the bin directory. ..... I have tried calling the Garbage Collector at page unload...I also have checked, inside the report, that the database is "up to date"... ... recycling the worker process of the IIS... etc...
I see that, in debbuging mode inside the Visual Studio, when the page loads the debbuging window shows a message notifying that the symbols related to the Crystal Reports dll's could not be loaded.
Should I need to modify the default properties of the database? I checked "database is case insensitive", "use indexes or server for speed".. I have tried checking and unchecking the box "performing grouping on server"
Oh by the way, my report has about 4 subreports in it. Each report loaded shows 1 or 2 pages.
ANY HELP WILL BE EXTREMELY APPRECIATED....
MMS

See [Crystal Reports For Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23&overridelayout=true] article, page 107 and on for details on how to use Crystal reports in session.
Ludek

Object not known in CO (IAOM 028)

Similar Messages

Maybe you are looking for