Object Number range "DEBITOR": NUMBER_GET_NEXT error overlaps
Hello,
I have an error with one of the number range belonging to the standard object "DEBITOR".
When we try to create a customer the system gives a old number already saved for another customer in database KNA1.
I know that this number range is buffered and we have gaps in number range used but
Why the system gives number already used?
For example: we have a rumber range from 5000000 to 5000199 and the last number used is 50000040.
When you create a new customer and the system runs the standard function NUMBER_GET_NEXT, it assigns the number 50000036.
Please, could you help me?
thanks in advance,
aupalaura
Edited by: aupalaura0 on Apr 23, 2010 12:17 PM
Hi,
Check whether the number ranges in question were initially made external and lateron were made to internal number range assignment.
Thanks
Aravind
Similar Messages
-
Connection object Number Ranges
Hi Experts,
Internal number range was not working in Connection object
When I press enter at ES55 screen the following message was coming
Internal number assignment not possible for structured key
Diagnosis
You have not entered a connection object, device location key, or a property key.
Since the key has structure XXXX-XXX-AA-NN, a number cannot be assigned internally.
System Response
The transaction was terminated.
Procedure
Assign a key with structure XXXX-XXX-AA-NN.
After this message I have deleted the existing number ranges and added new number ranges in configuration settings,
NO: 01 From No: 1 To No:10000 current no: 0
NO: 02 From No: 10001 To No:20000 ext after that both internal and external number ranges were not working. How to resolve this error please guide me.
Regards
vishnuHi,
As Connection Object & Device Location are functional locations so you have to be sure to map it to the same structure as defined in PM.
The structure can be defined in PM through this path:
Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Technical Objects -> Functional Locations -> Create Structure Indicator for Reference Locations/Functional Locations
Here you can define your own edit mask for your structure for the functional location.
according to the error message you got the Edit mask defined in your system must be XXXX-XXX-AA-NN.(kindly Check).
X means you can enter both number and letters.
A means only letters can be entered.
N means only numbers can be entered.
So try something like 1ABC-1A-QW-77(again check with the old number range that was defined)
You can change the edit mask to 'XXXXXXX......XXXXXXXX'.(full field filled with X).
and then I guess you can use the number range you have defined(as you wrote above) in the Connection Object number range(Object : ISU_EHAU)
Kindly revert back for any clarifications.
Regards,
Rakesh..
Edited by: Rakesh Dasgupta on Feb 12, 2011 2:41 PM -
We have an issue with the Object number ranges not matching across clients. In config it will not allow us to lower the range that currently exists. The range in production and QA does not match the ranges out in Dev. This is causing an issue when trying to use the EPIUSE tool to copy down the HR_Planning objects. According to EPIUSE, the Number ranges should be the same across clients, but we are having a difficult time getting them corrected. I don;lt have access to the transaction snum, or srno. Any suggestions?
Thanks,
JimHi,
If you need to align number ranges for PD objects (O,S,C, etc.) you should use transaction OONR.
Otherwise, if you try to synchronise 2 systems, you can try to delete overlapping objects in destination system. For example to delete employee records you can use program RPUDELPN, to delete PD objects you can use program RHRHDL00.
Cheers -
Objects Number Range Assignment
Hi Gurus,
Please guide me how to view the differnt number range that are been assigned to different Object
I have C,S,O which has different differnt set/series of numbers assigned to them.
I am aware of V_I77IV and the SPRO ORG . Management setting also , But it only shows the symbols, $$$$ IN EXT , $$C IN EXT , $$O IN EXT , $$C IN EXT.
No where i could see the number ranges like say Org-90000000-90000050 ,Position 80000000-80000650 etc.
Your Guidance would be highly appriciated.Hi,
I guess I have responded to your original question which was were can I see OM ranges.
Your system should have in T77IV View
Subgroup Internal Number Assignment External Number Assignment
$$$$ IN EX
$$A IN EX
$$BU IN EX
$$C IN EX
$$O IN EX
$$Q IN EX
$$QK IN EX
$$S IN EX
$$T IN EX
And OM ranges should have existing subgroup
$$$$
$$A
$$BU
$$C
$$O
$$Q
$$QK
$$S
$$T
And each subgroup should have two entries
Range From number To Number Current number Internal (' ') or external ('X') number
EX low value high value 0 X
IN low value high value current value
This is before any PD/OM objects are created. -
Dear Experts ,
When I try to assign number range to the excise objetcs per excise group , the exise group defined by me doesnt appera in dropdown . What cud have gone wrong ??
Pls extend help .
Regards ,
AnisHello
while trying to assign no. range to the follwing objects , the system doesnt show the excise group created by me .
J_1IINTPR2
J_1ILIC
J_1IPLA2
J_1IRG1
J_1IRG1_T
J_1IRG23A1
J_1IRG23A2
J_1IRG23C1
J_1IRG23C2
J_1IRG23D
while i have assigned the no ranges for the following without any difficulty .
J_1I57FC
J_1I57FC
J_1IARE1
J_1IARE3
J_1IARE3
J_1IBOND
J_1ICONPLA
J_1IEXCEXP
J_1IEXCINV
J_1IEXCLOC
J_1IEXCLOC
J_1IEXCLOC
J_1IEXCLOC
J_1IEXCTST
J_1IEXINEX
J_1IINTNUM
Pls extend help
Regards
Anis
Edited by: anis bazmi on Nov 18, 2008 2:34 PM -
Hi
can any one tell,for which objects we need to maintain the number range from SD point of view,at the time of CIN Configuration._1IARE1:::::::ARE1 Doc No object based on Series Group
J_1IARE3:::::::ARE3 Doc No object based on Series Group
J_1IBOND::::::Excise Bonding: Bond number object
J_1ICERT::::::: Withholding Tax Certificates (India)
J_1ICHLNNO:::: Internal number range for challans
J_1ICONPLA:::: Consolidated PLA serial no. generation
J_1IDEPINV::::: Excise Invoice Number for Depot Invoices
J_1IEXCEXP::::: Export excise invoice number range
J_1IEXCINV:::::: Excise invoice number
J_1IEXCLOC::::: Local excise invoice number range
J_1IEXCTST:::::: Excise invoice with intervals
J_1IEXINEX::::::: Excise invoice number for export
J_1IINTNUM:::::: Internally document number to be generated
J_1IINTPR2::::::: Despatch serial number
J_1ILIC:::::::::::::: Excise Bonding: License number object
J_1IPLA2::::::::::: PLA part II number range object
J_1IRG1:::::::::::: RG1 Number range object
J_1IRG1_T::::::::: No. Range for RG1 - Excise group / Material
J_1IRG23A1::::::: RG23A part 1 no. range object
J_1IRG23A2::::::: RG23A part II number range object
J_1IRG23C1::::::: RG23C part I number range object
J_1IRG23C2::::::: RG23C part II number range object
J_1IRG23D:::::::: Folio Numbers for RG 23D -
CRM - Org objects number range
hi,
when i'm trying to replicate organisational data from r/3 to crm system is not assigning the number to org business partners. i would like u all to guide me on this to how to go about it. which setting am i missing.
plz guide me.
regards
suresh shi
First step is to define number range
Cross-Application Components SAP Business Partner Business Partner Basic Settings Number Ranges and Groupings Define Number Ranges
Second step
Cross-Application Components SAP Business Partner Business Partner à Basic Settings à Number Ranges and Groupings à Define Groupings and Assign Number Ranges
Third step
Customer Relationship Management Master Data Business Partner Integration Business Partner-Organization Management Set Up Integration with Organizational Management
Make following settings here
HRALX HRAC X Activate HR Integration
HRALX OBPON ON Integration O-BP Activated
HRALX ONUMB 2 Business Partner Number Assignment (Org. Unit)
HRALX OSUBG Y4 Business Partner Subgroup (Organizational Unit)
Number Range
for details refer to C01document
http://help.sap.com/bp_crmv12007/CRM_DE/BBLibrary/Documentation/C01_BB_ConfigGuide_EN_DE.doc -
Error: For object RF_BELEG 9000, number range interval 92 does not exist FB
Hi,
When I am executing AFAB in test run mode for a particular company code I am getting below mentioned error:
+For object RF_BELEG 9000, number range interval 92 does not exist FBN1+
+Message no. NR751+
+Diagnosis+
+The database table NRIV has the delivery class 'C', i.e. the SAP default+
+settings are only in client 000.+
+Procedure+
+Create the missing number range interval in customizing.+
+Transaction code: FBN1+
When I maintain number range 92 this error goes away. My question is we have no where assigned this number range 92 to any of the Document type then why system is asking to maintain the same?
SanjayHi,
You might be using the number range (say 92 which you've created in GL view & not in ENTRY view).
Steps:
Go to Define Document Number Ranges for Entry View OR use T-code FBN1. Maintain & Assign two Number Ranges say 91 & 92 one for Document Type AF and another for AE for both the non-leading Ledgers say Y1 & Y2 ( Define Document Type for Entry VIew in a ledger). Also assign a number range to
Document type SX (Closing Posting) apart from the above two Number Ranges (91 & 92)
Hopefully it works for You............
Dipti -
Connection Objects / Functional Location Number ranges Issue
Hi ALL
Number range object: ISU_EHAU is related to Connection Object / Functional Location creation.
But my client wants to create Connection Object number and functional Location number with different number range series number.
Can any one guide me how to proceed?
Thanks In Advance
KKHi,
As Connection Object & Device Location are functional locations so you have to be sure to map it to the same structure as defined in PM.
The structure can be defined in PM through this path:
Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Technical Objects -> Functional Locations -> Create Structure Indicator for Reference Locations/Functional Locations
Here you can define your own edit mask for your structure for the functional location.
according to the error message you got the Edit mask defined in your system must be XXXX-XXX-AA-NN.(kindly Check).
X means you can enter both number and letters.
A means only letters can be entered.
N means only numbers can be entered.
So try something like 1ABC-1A-QW-77(again check with the old number range that was defined)
You can change the edit mask to 'XXXXXXX......XXXXXXXX'.(full field filled with X).
and then I guess you can use the number range you have defined(as you wrote above) in the Connection Object number range(Object : ISU_EHAU)
Kindly revert back for any clarifications.
Regards,
Rakesh..
Edited by: Rakesh Dasgupta on Feb 12, 2011 2:41 PM -
ERROR in number range in F-02, FB60 and all fininace postings
HI All
could you please help us on this issue , ERROR in number range got this error while posting all FI related , we cant able to post documents we are in ready for SIT but in unit testing got this error .
we don't have any clue , kindly share your experiance on thisHi Murthi,
Please check through T Code FBN1 whether you have maintained correct number range for Document type (Check document type in OBA7 and see what number range is maintained) you are posting in that particular company code and fiscal year.
If not maintained please maintain the same. It will solve your problem.
Also you can click on question mark tab in yellow and see the details of error. You can also get the information of error and solution.
Regards,
Pankaj Singh -
Error in purchase document number range
good wishes sapgurus,
while creating PO via requisition assignment using t.co.me58.
I am getting this error
*Document number range (i.e PR no.)is not within the defined number ranges*.
I have followed all the steps in this method of creating PO.
I have verified number ranges(which is defined as internal number ranges by default) defined in IMG PR Define number ranges as well as Document type number ranges.
I seen that the PR number which i created falls within the defined number ranges.
I have tried by defining different number ranges with creating different PR's whose number range is
within the defined number range.
But my problem is that The error message is recurring and i stuck up there
hence pls gurus help me in overcoming this error message
thank uHi Rishi,
Are you able to create PR then u can go ahead for PO creation
1.) Hope you might be given number range as external so that system is looking for that pattern of number range, plz check thoroughly.
2.) At the node of the define document type for PR use standard document type NB and use the same number range so this error will not get repeat.
Please let me know for futher details
Thanks...
Srini Rao -
Number Range for Warranty Claims
Dear Experts,
I am trying to work out with SAP warranty claim processing, I dont have any idea of warranty claim processing provided in SAP, I have gone through the SAP library and Best Practices, and trying to go through.
But I strucked up @ the initial stage itself. I have assigned my username through the T Code WTY_UPROF, then trying to create a warranty claim through T Code WTY.
I have mentioned the warranty claim type as precediting then clicked on create warranty claim. system is giving a message : "For object WTY_CLAIM , number range interval does not exist".
Then I tried entering an external number WTY1 then clicked on create, this time system giving another message " Number WTY1 lies outside number range validity area"
When I go through the help of the system message it is as follows:
*"For object WTY_CLAIM, number range interval does not exist
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code:"*
System is not even giving the T code for proceeding further.
I have checked in SPRO for warranty claims number range, but couldn't find it out.
Please help me in this regard.
Where should I make the settings?? And What all other settings to be done for Warranty Claim Processing, creating, processing and Completing.
Please give me in detail information if possible.
If anybody has the document also please forward it to me
Thanks in advance,
Regards,
B. Praveen.Dear Keshav,
Thanks, I found that and went to Number Ranges, but system still giving error message to maintain the number range.
"System error during group maintenance".
When I click on help of the error message it is as follows
System error during group maintenance
Message no. NR899
Diagnosis
The system has identified an inconsistency in the tables for number range maintenance.
System Response
Program termination.
Procedure
In most cases, you can overcome this by executing the report RSSNR0T1 (Consistency check and repair of number range intervals). This report lists the inconsistencies and eliminates them (with F11 = "Confirm").
Why this message is coming?? and what is the solution for that?? Is there any config missing for that??
Please help me out.
Thanks and Regards, -
hi friends,
I'm working on module pool programming.How to generate dynamic numbers when user saves the data?
thanks in advance.Hello Hosmath
You could create your own number range object (transaction SNRO ) for your application.
To retrieve the next number use fm NUMBER_GET_NEXT (input: range object & number range).
Regards
Uwe -
Urgent : Unable to maintain the Number ranges for Excise Groups
Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga RamHello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet -
Client Copy: Each time a client copy is made, material movement postings cannot be processed until several number ranges are reset and the user gets the message Express document update was terminated. These number ranges can be reset thru SNRO. But identifying what objects need to be reset also difficult. I dont know how to identify what objects need to be reset the number ranges. This problem occurs each time a client copy is made (The user faces). I am trying to reset all the objects number ranges automatically by writing a custom program. Each time the client copy is made, the user can run this program and be able to reset the number ranges for all objects automatically. Can anyone help me if I can write a program to achieve this and how?
Thanks,
Sobhan.HI,
Try to use the program RSSNR0I0 for resetting the number range object. This will accept only one number range object.
Otherwise create a new program and call the FM NUMBER_RANGE_INTERVAL_INIT with the number of objects one by one.
Please let me know if it works.
Thanks,
Naren
Maybe you are looking for
-
SUPER 825CA in Mac mini G4?
Got one cheap from eBay thinking it will work in my Mac mini G4, but the system locks up or won't boot with it connected. From my research, I've been able to determine that the SUPER 85JCA or simply Panasonic UJ-85J-C is the one to get. Can anyone co
-
I think I'm getting too old for computers. I have an IPod Nano and frankly I'm at a loss to remember how to sync the Ipod to my PC. Because of this I have re-set the iPod at present I'm going nowhere HELP!!
-
Deleted files showing up in music player..
I bought a Nokia 5610 a couple of days before..love the phone.. but i have no idea how to refresh the music player.. deleted files keep showing up to the music player.. and also can i set a particular folder to search for new songs instead of th whol
-
Wire broken inside PowerBook G4, what wire is it?
Okay so... My Uncle received a PowerBook G4 Pro 17 Inch from His Brother. When he got it, he said it had a ugly looking blue apple at the top left, so I was like okay.... it had OS X Tiger. He said it would boot fine, some times it would take a while
-
Itunes can't open right the second time
So I open my itunes after rebooting and everything is fine. I close it but when I want to re-open it, nothing happens. I have to launch the task manager to stop Itunes working (even if it's not open) and then I open it and it freezes. So I got to reb