Object Relationship Service 6.10 (BC-SRV-GBT) & Document

New to SAP.
I am interested in producing linked business documents.
Showing all the different processes end to end.
Understand this service will link transactions in a business process?
Was wondering if anyone had some examples or advice
Regards,
George

Similar Messages

How to link CRM opportunity to R/3 projects through object relationship

Hello everyone,
i have this new development to link CRM opportunity with R/3 projects ( table PROJ ). as user creates the opportunity in CRM in relationships tab he should be able to see the R/3 projects as part of search help when he select create relationship -> projects. i have manged to get the project data from R/3 to CRM through middleware and search help is also showing list of all the projects. problems arises when i try to save the relationship by pressing save button. it gives me error messsage that
'Project with the number SI090100000000000 does not exist ==> Interlinkage is not created'
Please help me how to maintain this linkage.
Thanks
Sudhir Grover

Dear Sudhir,
I have search this help portal a lot to find the solution for my need that,
Present I am working for a project where the same requirement that what you had in one of your project and did successfully. Let me explain about it,
Opportunities will be created in CRM and Projects will be created out side CRM (Project systems) now I have to link this projects information to the corresponding opportunities in CRM.
For this, I was knew we have to set up "Object relationship profile" that is it.
But once I red this thread theoretically I got confidence, the requirement can be achieved by following your way, but here I have the below doubts
1. How to replicate CProjects to CRM from ECC?? (Present middleware set up is working fine (BPs and Products, and etc. replication is happing fine)
2. ITS (PPM URl) is already provided by PPM team and working fine (I have tested using Transaction launcher), in this case can I use that ITS URL?
I am really grateful to you!! Kindly help me out!!
My Email ID is - [email protected]
Thanks and regards,
Shaik.

Implementing "object-group service"

Running 8.2(3) on an ASA 5510
I have created the two following object groups.
object-group service gatewayTCP tcp
port-object eq 88
port-object eq 135
port-object eq 445
port-object eq ldaps
port-object eq 3268
port-object eq 3269
object-group service gatewayTCP-UDP tcp-udp
port-object eq domain
port-object eq 389
port-object eq 464
port-object range 49152 65535
I have run into an issue with "domain" working in the tcp-udp type. The following access-list does not work without explicitly calling out "domain" for both TCP and UDP. Everywhere I looked I appear to be doing it right so what am I missing. Does "permit tcp" need to be "permit ip" to cover both tcp and udp? I found one article with someone suggestiong just make it "permit tcp" and it will work. Not in a position to test at the moment so figured I'd ask here. Want to be sure I'm not getting bit anywhere else related to these object groups in case I am not implementing them correctly?
access-list dmzAccess extended permit tcp host 172.26.11.10 host 10.16.11.203 object-group gatewayTCP
access-list dmzAccess extended permit tcp host 172.26.11.10 host 10.16.11.203 object-group gatewayTCP-UDP
Is this a bug with service object groups? Is there some place I need to enable this feature?

Hi,
Have you tried configuring it like this
object-group service GATEWAY-SERVICES
service-object tcp eq 88
service-object tcp eq 135
service-object tcp eq 445
service-object tcp eq ldaps
service-object tcp eq 3268
service-object tcp eq 3269
service-object tcp eq 53
service-object udp eq 53
service-object tcp eq 389
service-object udp eq 389
service-object tcp eq 464
service-object udp eq 464
service-object tcp range 49152 65535
service-object udp eq 49152 65535
access-list dmzAccess permit object-group GATEWAY-SERVICES host 172.26.11.10 host 10.16.11.203
I am not sure if it was only after software 8.3+ that the command under the actual "object-group" was of format "service-object tcp source" / "service-object tcp destination" (or the same for UDP)
- Jouni

Extract account Based COPA from R/3 using Business Object data services

Hello,
We have a requirement to extract Account Based COPA from SAP R/3 to Teradata using Business Objects data services.
I have read couple of white papers which give information on Rapid Marts( which are built in packages) already available for some applications like inventory, GL, AP, AR etc. But I could not find anything for COPA.
Would anyone give me any information on how to use BO data services for COPA?
Also if there is no rapid mart available for COPA, does anyone know how to create custom data marts in BO Data services?
Is there any document available on this?
Please respond as soon as possible.
Thanks.

Hi,
this forum is for the SAP Integration Kit. Would suggest you post your question into the EIM area for Data Services.
Ingo

Imported Object Enterprise Service Builder

Hi..
when Imported Object Enterprise Service Builder
Connection data for the R/3 import is incomplete
Open the software component version SAP BASIS 7.10 and
enter the system and the client
can not import MATMAS object
How to resolve that problem
regards
chandana

Double click on teh software component version in ESR for which you want to import idoc. Then select the raido button import of idoc interface from sap systems permitted. Then give the R3 system information like the system name, client and then try once again. It is nothing related with technical and business system.
step by step:
double click on SWCV->
Interface Import ->you have to provide system name , client then ll try to import
pls refer : http://forums.sdn.sap.com/thread.jspa?threadID=2143371&tstart=0

Question of Business Object Data Service

hi Expert,
Now we are doing project for CRM integration to BODS (Business object Data Service).
There is business request for deduplicate check whole CRM Business partner data base.
The data quantity is 10Million and most of them are consumer role, we prefer to clean up the BP data via BODS and in CRM we use standard account merge functionality.
but I not sure whether BODS support deduplicate check for 10M consumer and how to do it?
Is there any one had experience or idea for this request?
Br.
William.

Sure DS can do that, no doubt about it. But before starting, I recommend you to carefully read the Match Consolidate Transform wiki page. Pay special attention to the setting of the BREAK_KEY that will have a significant impact on the performance and throughput of the matching process.

Business Object Data Services (BODI) without SAP MDM?

Hi,
From an architectural point of view; do you always have to use SAP MDM when you want to use the Business Object Data Services (e.g. for data validity checks when creating customers)?
Or can you use Business Object Data Services in combination with SAP ECC without MDM?
Best regards,
Marius

All Depends on your business needs.
1) As in if you want to use most effective cleansing (BODS contains inbult infor for Adderess cleansing) along with some data governance(Validation, assignments,MDM Workflow) I would say fo with BO-MDM Integration.
2) Here I am not sure via BODS - ECC you can handle ongoing maintainance , it is supreb for first time data load.
so it is better if you use ECC-BO-MDM ---> BI/ECC for smooth transition through out landscape.
3) Here also try to check the data structure compactiblity between BODS and ECC as per their version, it can also create a big impact.
Hope these points can clear many doubts
Rgds
Deep

Pagination +Business Objects Web Services SDK

hello there
please help me,
i use pagination with Business Objects Web Services SDK but i can't limit number of records to aspecific number like
NameValuePair[] objNameValuePair = new NameValuePair[2];
        objNameValuePair[0] = NameValuePair.Factory.newInstance();
        objNameValuePair[0].setName("page.records.horizontal.limit");
        objNameValuePair[0].setValue("15");
        objNameValuePair[1] = NameValuePair.Factory.newInstance();
        objNameValuePair[1].setName("page.records.vertical.limit");
        objNameValuePair[1].setValue("600");
        view.setMediaArray(objNameValuePair);
waiting for your help.
thank you.

i waiting your help?
is the Question more difficult to answer it??

Business objects data services

Hi,
We are doing some feaibility study to implement the reports distribution by splitting the file according to vendors and sending the mail accordingly. As part of this i would like to know can we split the file as mentioned above and send email to the vendors using To and CC in the mail with the attachment of either .TXT file or XLS file using the Business objects data services.
Thank you
Best regards,
MANREDDY
Edited by: MANREDDY on Aug 13, 2011 8:28 AM

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

What SAP Business Objects Web Services to use with XI3.0

I'm new to BO and is tasked to install it.
What I've installed already is the BOE XI3.0 version and now want to install Xcelsius 2008 Enterprise.
What I can not figure out from the Xcelsius manual or SDN or OSS is what the Business Objects Web Services are the manual instructs you to install with Xcelsius.
I did find something called
BusinessObjects Web Services XI for Windows and downloaded it but is not sure if this is what I need to install as the business Object Web Services on XI 3.0
Can someone please direct me in the correct direction
Thanks in advance
Liezel

Hi,
i am not sure if i understand your question. If you mean Query as a Webservice (QaaWS), this component should be part of your XI 3.0 Enterprise installation. You could also use the flynet (www.flynet.co.uk) which is part of Xcelsius Enterprise 2008 SP1.
Best Regards
Ulrich
Edited by: Ulrich Hambuch on Sep 29, 2008 1:09 AM

Sample for Business Objects Web Services for Admin Tasks

Hi,
Anyone has any idea that where can I get a sample using Business Objects Web Services for Admin Tasks like:
- How To Set Security Rights
- How To Manage Categories
- How To Manage User Accounts
- How To Manage User Groups
Thanks,
Harshad

Samples are available at:
https://www.sdn.sap.com/irj/sdn/businessobjects?rid=/webcontent/uuid/e02e0a54-6471-2b10-c99c-d66e07fab102&startindex=21
Check BOSAP notes and other samples page for more info.

SAP Business Objects Data Services 3.2 - Homogenous System Copy

Hi All,
We have a SAP Business Objects Data Services 3.2.
I wanted to know if it is possible do a homogenous system copy or any alternate procedure. I just need to perform this on a Development system and move all its content to a new Sandbox installation.
Any info on this will be much useful.
Thanks
Jaianandh V

Hi,
you could extract an ATL File from DEV and import it to Sandbox.
This can be done via the DS DEsigner. Please Check the DS Designer User Guide for more information.
Regards
-Seb.

SAP Business Objects Data Services (free) Trail version!

Hello guys,
I am trying to learn SAP Business Objects Data Services.
After a long search, i couldn't find any (free) trail versions in sap website.
Are there any free trail versions available for Data Services!!, if so please post the link!!
Your help would be appreciated!
Thanks,
Dhee

hmmm... maybe 'recently' was back in Summer 2010 ?
if you are a small to medium enterprise, and are looking to buy, take a look at our offerings over here: http://www54.sap.com/solutions/sme/software/overview.html
Else, if you are an existing customer, with an active support/maintenance agreement and license, please download your software from the marketplace here: www.service.sap.com/swdc
Regards,
H

Business Objects Data Service notify Busienss Objects Reporting ?

Hi,
Do you see me if it's possible to notify Business Objects reporting when the Business Objects Data Services has finishing these jobs ?
It's a standard integration or customization in your side ?
Thanks for your help
Gilles

We had to customize it by putting in script code, at the end of the job, that updates a table with the job name time it started and time it completed. This table is then cross-referenced with the Universes and finally reports that it involves. The end users logon to a JSP page that we created that allows them to search by report name to determine if all jobs related to the report have completed. If even just one job is in progress or hasn't started, it shows the report as not being avaialble for execution.

Business Objects Data Services - Accelerators

Hello,
Can someone point me to where the SAP accelerators( ATL files) for Business Object Data Services (3.2) could be downloaded ?
Thanks,
Mahesh

Notice the description of what this forum is for (top of page):
This forum is dedicated to all other development-related questions which are not directly addressed by other forums. This includes Business Objects SDKs, products, or technologies which do not fall under BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server, or Crystal Reports (for example Desktop Intelligence SDK, Universe Designer SDK, Portal Integration Kits, Java User Function Libraries, and other third party technologies or development languages).
Perhaps this link will help:
http://www.sdn.sap.com/irj/sdn/bwa
Ludek

Object Relationship Service 6.10 (BC-SRV-GBT) & Document

Similar Messages

Maybe you are looking for