Object Restriction / User exit in Plant Maintenance Module

Dear experts,
Can anyone guide me if i want to put certain restrictions like :
1. other Department will not be able to create Order using other dptt. Maintenance work center, equipment etc.
2. user should not be able to cancel TECO status of order, or not allowed to to put deletion flag on order or notification.
3. Order Release retriction.
4. Should not be able to release/operate other dptt order.
How can i find Object where i can restrict or user exits related to all this.
Thanks
DM

Hi,
1--You can use field exit for checking and validate the workcenter and equipment, but abaper only can do that.
This user exit also u can use "IWO10009 Maintenance order: Customer check for "Saving""
2--please test below user exit can use "IWO10026 User check when setting status "Do not perform""
3-- Use below user exit for validate before release order.
IWO10002 Maintenance order: Customer check for order release
Regards
Sen.

Similar Messages

  • CATS--- How it is transferred to plant Maintenance module

    Hello HCM Guys,
    Currently we are confirming Manhours using IW41 against the reservations of the respective manhours made in the Maint work order.After confirmation , the cost of the manhours is accumulated on the work order which is settled on the sender Cost Center maintained in the Work center master data. After TECO of the work order, Settlement of the maint work order is done in Controlling module thru KO88/KO8G(mass) and the cost transferred from the sender to the receiver cost center maintained in the CO during month end closure activity before period end close. Also standard Activity re-evaluation is done for consecutive month activity price update thru the link of activity type---Cost center assignment. This is the standard process of confirmation of manhours in SAP.
    Now since the business needs indiviual employee manhours confirmation(Internal and external employees(Contractors), I understand it can be achieved by the CATS component of HR module. I understand that in this process of CATS we do the daily attendance/absence/overtime thru the standard data entry profile maintained in CATS by HR team. After the employee has entered his daily time sheet and released, it is approved by Time administrator of HR dept which finally goes to Manager-HR for his approval. The approved time sheet manhours are then  transferred to respective module like PS, PM, CS modules. As we have never used this before I wnat to know how the transfer of costs happen when transfer to Plant Maintennace module is done. How the cost gets booked. How the cost is charged and transferred to payroll in PM...Does this happen against Maint Orders or CO Internal orders?Please explain me the detail procedure after transfer of manhours to Plant maintenance module and the cost transfer to respective receivers from sender objects....
    Thanks
    Murad Shaikh

    usually there is one step approval in CATS, You can do so via cats_appr_lite in backend
    Transfer to other components is done via CAT6
    Refer help.sap.com on various target components CATS can do transfer. you need to define the correct attributes
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/f1/76a97879a311d38e720000e81de309/frameset.htm

  • Plant Maintenance Module

    Hi Expert,
       I am new to Plant Maintenance module, I want to know flow of this module, transaction codes involved, few objects if possible for better understanding. Thanks in advance.
    Regards ,
    nagaraju  Tankala

    hi ,
    look at  this...
    http://help.sap.com/saphelp_nw04/helpdata/en/66/158661547611d182cc0000e829fbfe/frameset.htm
    regards,
    venkat.

  • Creating Z report for material stock (plant maintenance module)

    hello,
    we are implemented Plant maintenance module (SAP PM)  in our organization.
    our requirement is to create a stock report which will incldue
    followings:-
    1)material number
    2)plant number
    3) storage location
    4) material type
    5)valuation type
    6)Opening Stock 
    7) OpValue 
    8)Received Stock  
    9)   ReceiptValue      
    10)   Issue Stock          
    11)  IssueValue        
    12)  Closing Stock      
    13)  Closing Value
    we want above details in ALV grid format.
    to gert all the details for perticular material, we calcute closing stock and closing value in following manner:-
    opening stock + received  stock - issue stock = closing stock
    opening value + recipt value - issue value = closing value
    we are unable to find table name for  accessing  opening stock,  received  stock , issue stock  & opening value ,recipt value , issue value from system. please suggest table name information for getting above details  for creating Z report

    Dear friend,
    Before to make a decision to bulid a custom report make sure you have checked out the following standard transactions:
    MB5T Stock in Transit
    MMBE Stock Overview
    MD04 Stock/Reqs list
    MB53 Plant Stock Availability
    MB52 Warehouse Stock
    MB5M Expiration Date list
    MB5B Stock for Posting Date
    MB5T Stock in Transit
    MBBS Valuated Special Stock
    MBLB Stock with Subcontractor
    The possible tables are:
    MARA, MARD, MARC, VBEP, VBAK(VBAP), EKKO(EKPO), EKBE, EBAN, EBEW, MSEG, MKPF,...
    Good luck!

  • Creation of Sub Job Order/ Maintenance Order in Plant Maintenance Module

    Dear SAP Expert and Gurus,
    I am new in SAP Plant Maintenance Module, and right now having problem to create sub Job Order/ Sub Maintenance Order. Kindly provide the step on it.
    Thank you
    Regards
    Leonard Tan

    hi
    check out this link
    http://help.sap.com/saphelp_40b/helpdata/EN/5b/ae2e484b8611d182ba0000e829fbfe/content.htm

  • Urgent Issue in Plant Maintenance Module

    Dear Experts,
    We have requirement as described below, please give us your solutions / comments on this.
    We have GTC company which is having around 800 trucks for transporting the products. I n this company we have implemented SAP Plant Maintenance Module, as we have the maintenance activities done for vehicles.
    Under the same group of companies, we have PM1,PM2,PM3 companies which provide maintenance to GTC. These companies are not external to the group.
    When I raise a maintenance order for a vehicle then I will mention hours of work and material that need to be used in the activity. This maintenance work / labour is provided by PM1/PM2/PM3 company.
    In plant maintenance we have external service management, but that is for external vendors who provide service to GTC.
    But how to handle the same with internal vendors like PM1/PM2/PM3.
    Please tell me how to handle this kind of scenario.
    Thanks in advance.
    Nagesh

    Hi,
    this is a major topic and cannot be covered in a blog. Even if it can it will take a lot of time to clarify. So, first do your checks within your module. Check if u really need to treat the services from the other company as external services. You might as well create workcenters in the plants of the other companies. And make a single maintenance planning plant for all the plants in these companies. This will make a better solution technically. But think also from the perspective of the cost of this solution. Meaning, is it worth doing all the jobs such as maintaining activity prices, work centers in the other plants etc..
    In general, my suggestion is include the FI and CO consultants at least in the discussion. It will b good if u can have the MM consultant also during the discussion.
    Bala

  • How to read the configuration for SAP GUI elements in Plant Maintenance module from SPRO and leverage the same in NWBC for HTML.

    Dear Members,
    Greetings for the day!
    I am working on NWBC for HTML in Plant Maintenance module.
    We have configured some changes in SPRO for customizing the UI elements( like visibility, mandatory ) like tabs and fields in transactions like IW21( Create Notification).
    As of now separate parallel configuration needs to be carried out in NWBC for HTML in PM module to achieve the same UI features for creating notifications and this is time consuming.
    Is there any way to read the configuration done in SPRO for the SAP GUI's and leverage the same in NWBC for HTML.
    Appreciate your time in responding to this.
    Thanks & Regards,
    Ram.

    >
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
    MatchExpression /app1
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    <IfModule mod_weblogic.c>
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    MatchExpression /app2
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    PathTrim /weblogic
    </Location>
    >
    This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
    Try something like this ...
    <Location /app1>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
    DebugConfigInfo ON
    </Location>
    <Location /app2>
    SetHandler weblogic-handler
    WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
    DebugConfigInfo ON
    </Location>
    where /app1 and /app2 are contexts of your weblogic applications.
    http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
    http://httpd.apache.org/docs/2.0/mod/core.html#location

  • Cancellation of backflushing in plant maintenance module

    Hi all,
    Can we stop the backflushing in plant maintenance module? i have not activated backflushing in the material and also in the work center. Still, when i give the materials in the order while confirming it, the materials are issued from the stores. how to stop this background process?

    Hi Reddy,
    It is in the PM orders. Actually for simplifying their work they are doing the maintenance order confirmation using TCode "IW42 - overall completion confirmation". since the materials are entered in the operations they come in the confirmation screen and hence gets confirmed.
    Should i do the process of time confirmation and material issues through goods issue for order?
    thanks
    parthasarathy

  • Fund management in plant maintenance module

    Hi.
    can anyone explain how fund management works in plant maintenance module. Actually to say we have implemented FM. We make FM entries in orders in GOTO -> assignment -> Fund Management.
    The question is, when we make entries in PM orders, it creates auto reservation No. for the materials (components) which are added in component tab of order. though in PM order we have made FM entries it is not carried by the system in auto generated reservation no. Plz advice.
    Harish

    Hi,
    Plz find below te error occured in program.
    Program RFFMRP_MAT_RESERVATION does not exist
        Message no. DS017
    Diagnosis
        The program you specified does not exist.
    Procedure
        If are creating a new program, acknowledge the message and continue.
        If you are trying to access an existing program, check the spelling. For
        a list of existing programs, select Utilties -> Find program.
    Can You suggest the alternate answer for the problem.
    Regards,
    Harish.

  • Issue related to maintenance package in Plant maintenance module

    Hi ,
    Has anyone worked related to Task lists and Maintenance packages in Plant Maintenance module? i have a requirement where in i have to list all the Task lists whose maintenance packages have been changed.
    i need to get the current maintenance package assigned as well as last maintenance package used and the changed date.
    I need to know where can (i mean tables) we get all these info. 
    Thanks
    Raj

    Hi,
    Has anyone got any info regarding my query
    Regards
    Raj

  • Installed Base / Fleet Objects - Plant Maintenance Module

    Dear Experts,
    Can anyone guide me what are fleet objects and Installed base in relation with Plant Maintenanace Module?
    Please do throw some light on it.
    Thanks
    DM

    Hello Deepak,
    IBASE -> A collection of function modules used for VC or Hierarchcal structures.
    Fleet   -> Is used for example if you have to maintain many vehicals i. e. car park etc.
    this is the easiest way to describe the use of both elements.
    Hope that this helps
    Regards,
    Isabelle

  • Withdrawl quantity Restriction - Plant Maintenance Module

    Dear Experts,
    In standard SAP, we can issue more than the material quantity created in reservation. Can we restrict the same, user will not able to issue more quantity than the quantity reserved while creating reservation.
    Any idea?
    Thanks
    DM

    hi,
    You can do that with user exit while saving a material movement, which checks reservation quantity and issue quantity.
    Hope it helps.

  • Restricting user exit ZXEDFU02 to one customer in WE20

    I'm new to SAP. I've just written a code in user exit 002 (include zxedfu02) for the bill-to party invoice IDOC generation (FUNCTION IDOC_OUTPUT_INVOIC). My code is working perfectly. The only problem is I would like to restrict the use of this user exit to only one of my customers. From my understanding once I've programmed the user exit, every IDOC that is generated using IDOC_OUTPUT_INVOIC will perform my user exit, however I would like to be only executed for one partner. How do I do this?
    If possible, please post a step by step solution to my problem, I would really appreciate your help.
    Thanks in advance.
    Edited by: mrisad on Jul 29, 2010 4:21 PM

    Hello Mrisad,
    As per your input, your exit function module EXIT_SAPLVEDF_002 contains CONTROL_RECORD_OUT as the import parameter.
    Within your include please check the value of the following(which are the reciver related values) in the debugging mode.On top of your current code you can add this check, and include ur current code within this check.
    RCVPOR
    RCVPRT
    RCVPRN
    RCVSAD
    RCVSMN
    RCVSNA
    RCVSCA
    RCVSDF
    RCVSLF
    RCVLAD
    Hope this will help you..
    Regards,
    Antony Thomas

  • SAP Enterprise  Structure for Plant Maintenance Module

    hi,
    please explain me SAP Enterprise  Structure for Plant maintenance (PM) module.

    Hi,
        As SAP PM enterprise structure comprises of Company, Maintenance Planning plant & Maintenance Plant. Company will be defined in Financial Accounting. Production plant will be the maintenance plant. Seperate plant would be created as Maintenance Planning Plant. All the plants (Maintenance Planning plant & Maintenance Plant) should be assigned to the company. All the maintenance plants should be assigned to Maintenance Planning Plant. For all the Maintenance Plants, technical objects would be created.
    Company --> Maintenance Planning Plant --> Maintenance Plant.
    Relation between Maintenance Planning Plant & Maintenance Plant will be 1:1 or 1:n or n:1.
    Regards,
    Maheswaran.

  • What is the use of service entry sheet in plant maintenance module.

    Hi Expert,
    I want know about, What is the use of service entry sheet in plant maintenance?
    Regards,
    Ram Rathode

    Hi dear,
    Service entry sheet concept is used in all the modules.
    Service entry sheet is created to do the service confirmation and to pay the vendor for the services which he has performed.
    Based on the service entry sheet invoice is booked by Finance.

Maybe you are looking for

  • How to format an account to show date format with MDX function @FORMATDATE

    Hello, I am working with an ASO cube where all accounts are set as numeric type. We have some accounts which hold date information for eg Date1 member which is a stored member will have data as 20120601 for June 1st 2012. In financial reports, i need

  • X200 hotkey driver on Win7

    Hello, i upgrade system to Win7 and i have a problem with hotkey driver. It can't install driver and write - "cann't copy file to destination directory". This problem only "on screen display" driver. I hope that i explain correctly. I am from Russia

  • Mandatory variable error of report design in Netweaver 2004s

    Hi.   I have created a query contained a variable, this variable is provided by sap named 0I_FPER (Period/Fiscal Year (Interval Entry, Required)). I run this query by BEX Analyzer, the system will popup a dialog to ask me input Fiscal Year/Period, Wh

  • HT1296 Syncing my contacts with my iPad

    I have tried syncing my contacts with my iPad and I only seem to get 886 of my contacts added - leaving out over half of them (I have 1700 plus contacts) - why can't I add ALL my contacts?  Has anyone else had this problem?  Cheers

  • Handle textfields

    Hi, I'm working on a J2EE web application using struts Framework and INFORMIX 9.0 Database. I have a form with a textfield which can contain more than 255 characters and I dont know which java type should I use to handle it. I cant use String type co