Object selection wont stay on selected object

Does anyone know of a setting or fix for this. Everytime I select an object or group above any other object, M3 grabs the the next object below. I find myself avoiding alot of elements that would look better just to avoid this bug. Any suggestions?
This is stopping what little creativity I do have dead in its tracks.
Nava

Any luck on this? I use a wacom myself and didn't see this, but maybe my projects aren't complex enough...
Patrick

Similar Messages

Why can't I open the filter gallery in Photoshop CC 2014? I've converted the photo layer into a smart object, but the filter gallery selection is still grayed out.

Why can't I open the filter gallery in Photoshop CC 2014? I've converted the photo layer into a smart object, but the filter gallery selection is still grayed out. How do I make it active?

Please go to Help, System Info and Copy then paste here.
Benjamin

How do you select an object that is directly under another object?

How do you select an object that is directly under another object?
I was working from a template and I wanted to make a text box the same size as a column box that was put there in order to keep the text in the confines of the paper that is was being printed to.
I could actually put text in each column fine but I wanted it to be in a text box so that I could slightly tilt the test box to compensate for my printer feeding it in slightly wrong. I accomplished this on another template but I could not on this one. If I was working in InDesign or something I know I could just select that layer but I'm at a loss of what to do here. How do I select a column right under a text box? I just thought of something. Once I make the text boxes the same size as the columns I think I can just delete the columns from the inspector. But that would be kind of a work around. I know you can hold down command when nothing is selected from outside the document and then highlight but this is not working. Does anyone have some tips and tricks when it comes to having control over which objects you are selecting when it comes to objects that are overlapped as well as directly over each other.
Thanks.
Tim

I'm not sure it's documented any where, but it's not too difficult. First, ⌘-click outside of the layout area to enter object mode then drag the cursor towards the two objects until you see the handles. Now, again ⌘-click on the top object to deselect it. You can now move the underlying object to the front to edit, delete, etc.
After typing this, it dawned on me, why not just click the top object to select it & move it to the back? I've only done the other way a bazillion times & now I think of this.

Why i am unable to select between 2 anchor points with in a object while dragging with direct select

why i am unable to select between 2 anchor points with in a object while dragging with direct selection tool instead it moves

Another option is to temporarily change your view to outline mode, when your done switch back to preview mode. Ctrl-Y or View>Outline {View>Preview} The menu option will change depending on which mode you are in.
And another option, double click on the object in question to place it in Isolation mode. You can now edit to your hearts content. When done, click on the gray border at top of document.
So as you can see there are multiple ways of accomplishing the same thing.

The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group). You can use Join command to connect two or more paths, paths in groups; ot to close an open path.

Hi I was trying to join two Ractangle Tool objects but getting this type of Error in illustrator cs6 :-
The selected objects cannot be joined as they are invalid objects,( Compound paths, closed paths, Text Objects, Graphs, Live Paint group).
You can use Join command to connect two or more paths, paths in groups; ot to close an open path.
Please assist me asap.

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
This sound like a firewall issue. I would start by disabling the firewall and seeing if you can connect. If this works then you know where the problem is,
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Drag Select Inside Points With The Direct Selection Tool While Above An Object?

I'm trying to modify a path in InDesign CS5 (Fig. 2), as it is now I have to select each point individually. Becasue while you're zoomed in (Fig. 1), you can't drag and select the points. When you attempt to do that, you end up dragging the whole image.
Is there a way to drag select inside points with the direct selection tool while your directly above the image with the paths you want to select?
Fig. 1
Fig. 2

FAIL #1:
No. When you copy paste the Cliiping Path [NOT the frame] into Illustrator, then alter the path and paste back into Indesign, it pastes it back as a FRAME, NOT a CLIPPING PATH.
FAIL #2:
Why do people comment on this stuff without first testing what they are suggesting?
What you suggested doesn't work or even make sense.
Apprently in InDesign, you can't have a CLIPPING PATH without an IMAGE there to begin with. When a FRAME OBJECT contains an IMAGE the option to convert the object to an UNNASSIGNED OBJECT is greyed-out, as in UNSELECTABLE, as in NOT POSSIBLE, which is another way of saying IMPOSSIBLE, which in most circles pertains to MAJOR FAILAGE.
When you CUT [hold command then press X] the CLIPPING PATH, from the FRAME/OBJECT you can then unassign the object, but when you paste the CLIPPING PATH back in, it invariably pastes the IMAGE along with the CLIPPING PATH, and once again the UNASSIGNED OBJECT is simply an ordinary frame with an image, and thus NO LONGER AN UNASSIGNED FRAME.
People like you make life harder dude, seriously.
Again, like some of the folks above, you're confusing a FRAME PATH [that you can alter and create with the pen tool as well] with a CLIPPING PATH. They are NOT the same thing.
Know the difference between the two before you feel inclined to respond.
My kingdom for someone out there with some merit and sense of accountability.
It's like, where do you people work? Are you serious? SMH.

I moved from an old macbook to a new one. I copied all my files onto a hard drive. On trying to setup my mail, i went into documents, microsoft user identities, office 2011 and it shows the database but wont let me select it. Urgent help pls

I moved from an old macbook to a new one. I have installed Office for Mac 2011. I copied all my files from my old notebook onto a hard drive. On trying to setup my mail, i went into my hard drive and accessed microsoft user identities, office 2011 and it shows the database but wont let me select it. Its almost as if the file is there but not accessable. I desperately need to access my old mail. How do I do this? I am fairly confident that I copied all files off my old notebook. Is there a way for me to search for the Database file? Maybe I copied it to a different location? Urgent help please.

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

When importing images in Pages, how do I set the default object placement to "stay on page" and "no text wrap"?

when importing images in Pages, how do I set the default object placement to "stay on page" and "no text wrap"?

Then use a Layout template.
I am a designer and I use Word Processing templates with layout breaks and all the other tools available because Layout templates are just WP templates with a lot of options removed.
Pages is not Indesign, but then Indesign is not Pages, …and Pages 5 is not Pages '09.
Unless your flyers are for the Web, why are you using Pages at all?
I am curious, what does your post have to do with the O.P.'s question? …and why are you posting it here?
Peter

IPhoto is asking me to use iPhoto Library Upgrader, downloaded it and it wont let me select iPhoto or the libraries on my desktop.

I have iPhoto 9.5.1. The other day I tried to open an old library that I moved from another laptop. Since then, I have been getting this error message. I have downloaded iPhoto Library Upgrader and it wont let me select my 9.5.1 version of iPhoto or the old library on my desktop.

You do not need the iPhoto library upgrader for a library created by iPhoto 9.5.1 - only for libraries form iPhoto '08 (version 7.x.x) and older
The iPhoto Library Upgrader is a tool that prepares libraries from iPhoto '08 (v7.x) or earlier so that you can upgrade them with the current version of iPhoto. If your library is from iPhoto '09 (v8.x) or later, you don't need to use this tool.
iPhoto '11 or later: About the Library Upgrader - Apple Support
LN

How to add selected values from table(selected using checkbox)to table?

Hi All,
i have created simple page with search panel with table in table i have created one column as check box for selecting.
here what my requirement is i need to do search multiple times to add some roles to from some different categories.here whenever i searched i ll get some roles into table there i ll select some role and i ll click add buttion. whenever i click add i need to add those roles into some other table finally i ll submit added roles.
here i followed one link http://www.oracle.com/technetwork/developer-tools/adf/learnmore/99-checkbox-for-delete-in-table-1539659.pdf
i used same code and able to see selected row in console, as object array how to add these into table.
please help me out
Thanks in advance
siva shankar

Thank you for a quick reply
i used the same thing before i go for table check box concept.here what i observed is when i search i am getting some results i am able to shuttle.but if i search again the shuttle is refreshing with new values even not available list its refreshing selected list. IF dont want refresh selected ones.
my usecase after make some searches I will select some roles from different categories at finally i ll submit.
i hope you understand me requirement. please suggest me is this requirement is possible in shuttle component? if yes please guide me.
thanks
Siva Sankar

How to create an collection/array/object/thingy from a bunch of objects for eventual export to CSV.

This is a follow-up to an earlier post (How
to output a bunch of variables into a table.) Now that I can ouput data for a single computer I need to to do the same for a list of computers into a CSV. In more general terms how do I get a bunch of $Computer objects into a single collection/array/object/thingy
with a clever name like $Computers?
# http://ss64.com/ps/get-wmiobject-win32.html
# http://social.technet.microsoft.com/Forums/en-US/da54b6ab-6941-4e45-8697-1d3236ba2154/powershell-number-of-cpu-sockets-wmi-query?forum=winserverpowershell
# http://serverfault.com/questions/10328/determine-cpu-processors-vs-sockets-though-wmi
# http://social.technet.microsoft.com/Forums/windowsserver/en-US/8443fcfd-5a0b-4c3d-bda7-26df83d2ee92/how-to-output-a-bunch-of-variables-into-a-table?forum=winserverpowershell
Param(
[Parameter(Mandatory=$false,ValueFromPipeline=$true)]
[string]$ComputerName = $env:COMPUTERNAME,
[Parameter(Mandatory=$false,ValueFromPipeline=$false)]
[ValidateScript(
If ( $_ -ne $null ) { Test-Path $_ }
[String]$ComputerListFile
Function Get-Computer
Param(
[string]$ComputerName
$Win32_PingStatus = $null
$Win32_PingStatus_Result = $null
$Win32_OperatingSystem = $null
$Win32_Processor = $null
$Win32_PhysicalMemory = $null
$Win32_ComputerSystem = $null
$Win32_BIOS = $null
$Computer = $null
$Win32_PingStatus = "select * from Win32_PingStatus where address = '$ComputerName'"
$Win32_PingStatus_Result = Get-WmiObject -query $Win32_PingStatus
If ( $Win32_PingStatus_Result.protocoladdress )
"$ComputerName ping succeeded."
$Win32_OperatingSystem = Get-WmiObject Win32_OperatingSystem -computer $ComputerName -ErrorAction SilentlyContinue
If ( $Win32_OperatingSystem -eq $null)
"$ComputerName WMI failed."
} Else {
"$ComputerName WMI succeeded."
$Win32_Processor = [object[]]$(Get-WmiObject Win32_Processor -computer $ComputerName)
$Win32_PhysicalMemory = [object[]]$(Get-WmiObject Win32_PhysicalMemory -computer $ComputerName)
$Win32_ComputerSystem = Get-WmiObject Win32_ComputerSystem -computer $ComputerName
$Win32_BIOS = Get-WmiObject Win32_BIOS -computer $ComputerName
$Computer = New-Object -Type PSObject -Property @{
Name = $Win32_OperatingSystem.CSName
Win32_BIOS_SerialNumber = [string]$Win32_BIOS.SerialNumber
Win32_ComputerSystem_Manufacturer = [string]$Win32_ComputerSystem.Manufacturer
Win32_ComputerSystem_Model = [string]$Win32_ComputerSystem.Model
#Win32_ComputerSystem_NumberOfLogicalProcessors = [int32]$Win32_ComputerSystem.NumberOfLogicalProcessors
#Win32_ComputerSystem_NumberOfProcessors = [int32]$Win32_ComputerSystem.NumberOfProcessors
Win32_ComputerSystem_TotalPhysicalMemory = [long]$Win32_ComputerSystem.TotalPhysicalMemory
Win32_ComputerSystem_TotalPhysicalMemory_GB = [float]($Win32_ComputerSystem.TotalPhysicalMemory / (1024*1024*1024))
Win32_OperatingSystem_Caption = [string]$Win32_OperatingSystem.Caption
Win32_OperatingSystem_CSName = [string]$Win32_OperatingSystem.CSName
#Win32_OperatingSystem_OSArchitecture = [string]$Win32_OperatingSystem.OSArchitecture
#Win32_OperatingSystem_SerialNumber = [string]$Win32_OperatingSystem.SerialNumber
Win32_OperatingSystem_ServicePackVersion = [string]$Win32_OperatingSystem.ServicePackMajorVersion + "." + [string]$Win32_OperatingSystem.ServicePackMinorVersion
Win32_PhysicalMemory_Capacity = ($Win32_PhysicalMemory | ForEach-Object { $_.Capacity } | Measure-Object -Sum).sum
Win32_PhysicalMemory_Capacity_GB = (($Win32_PhysicalMemory | ForEach-Object { $_.Capacity } | Measure-Object -Sum).sum / (1024*1024*1024))
Win32_Processor_Count = [int]$Win32_Processor.Count
Win32_Processor_NumberOfCores = [string]$Win32_Processor[0].NumberOfCores
Win32_Processor_NumberOfLogicalProcessors = [string]$Win32_Processor[0].NumberOfLogicalProcessors
#Win32_Processor_Description = [string]$Win32_Processor[0].Description
Win32_Processor_Manufacturer = [string]$Win32_Processor[0].Manufacturer
Win32_Processor_Name = [string]$Win32_Processor[0].Name
} ## end new-object
$Computer
} Else {
"$ComputerName ping failed."
$ComputerNameMgmt = $ComputerName + "-mgmt"
$Win32_PingStatus = "select * from Win32_PingStatus where address = '$ComputerNameMgmt'"
$Win32_PingStatus_Result = Get-WmiObject -query $Win32_PingStatus
If ( $Win32_PingStatus_Result.protocoladdress )
"$ComputerNameMgmt ping succeded."
} Else {
"$ComputerNameMgmt ping failed."
"$(Get-Date -Format o) Starting script $($MyInvocation.MyCommand.Name)"
If ( $ComputerListFile -eq $null -or $ComputerListFile.Length -eq 0 )
"Processing computer $ComputerName"
Get-Computer( $ComputerName )
} Else {
"Processing computer list $ComputerList"
$ComputerList = Get-Content $ComputerListFile
$Computers = @{}
$Results = @()
ForEach( $ComputerListMember in $ComputerList )
"$(Get-Date -Format o) $ComputerListMember"
# Get-Computer( $ComputerListMember ) | Add-Member -InputObject $Computers -MemberType NoteProperty -Name $_
# http://social.technet.microsoft.com/Forums/windowsserver/en-US/e7d602a9-a808-4bbc-b6d6-dc78079aafc9/powershell-to-ping-computers
# $Compuers += New-Object PSObject -Property $Props
# $Computers += New-Object PSObject -Property Get-Computer( $ComputerListMember )
Get-Computer( $ComputerListMember )
"$(Get-Date -Format o) Ending script $($MyInvocation.MyCommand.Name)"
If I try something like this:
Get-Computer( $ComputerListMember ) | Add-Member -InputObject $Computers -MemberType NoteProperty -Name $_
I get the following, even though $_.Name is not null.
Add-Member : Cannot bind argument to parameter 'Name' because it is null.
At <path to my script>Get-Hardware_Memory_OSVersion_CPU_Cores_ver04_sanitized.ps1:111 char:107
+ Get-Computer( $ComputerListMember ) | Add-Member -InputObject $Computers -MemberType NoteProperty -Name <<<< $_
+ CategoryInfo : InvalidData: (:) [Add-Member], ParameterBindingValidationException
+ FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.PowerShell.Commands.AddMemberCommand
Or if I try this:
$Computers += New-Object PSObject -Property Get-Computer( $ComputerListMember )
I get this:
New-Object : Cannot bind parameter 'Property'. Cannot convert the "Get-Computer" value of type "System.String" to type "System.Collections.Hashtable".
At <path to my script>Get-Hardware_Memory_OSVersion_CPU_Cores_ver04_sanitized.ps1:114 char:47
+ $Computers += New-Object PSObject -Property <<<< Get-Computer( $ComputerListMember )
+ CategoryInfo : InvalidArgument: (:) [New-Object], ParameterBindingException
+ FullyQualifiedErrorId : CannotConvertArgumentNoMessage,Microsoft.PowerShell.Commands.NewObjectCommand

Hi Aenagy,
If you want to combine all the computers' information to a single array, and add the property computername in the output, please also try the script below, which I make a little modification of the function Get-Computer, pleaese make sure the account running
the script has the admin permission of the remote computers, or you need to privide cridentials in get-wmiobject, also note I haven't tested:
$output = @()#to output information of the all the computers
ForEach( $ComputerName in $ComputerList ){#loop all the computers
$Win32_PingStatus = "select * from Win32_PingStatus where address = '$ComputerName'"
$Win32_PingStatus_Result = Get-WmiObject -query $Win32_PingStatus
If ( $Win32_PingStatus_Result.protocoladdress )
"$ComputerName ping succeeded."
$Win32_OperatingSystem = Get-WmiObject Win32_OperatingSystem -computer $ComputerName -ErrorAction SilentlyContinue
If ( $Win32_OperatingSystem -eq $null)
"$ComputerName WMI failed."
Else {
"$ComputerName WMI succeeded."
$Win32_Processor = [object[]]$(Get-WmiObject Win32_Processor -computer $ComputerName)
$Win32_PhysicalMemory = [object[]]$(Get-WmiObject Win32_PhysicalMemory -computer $ComputerName)
$Win32_ComputerSystem = Get-WmiObject Win32_ComputerSystem -computer $ComputerName
$Win32_BIOS = Get-WmiObject Win32_BIOS -computer $ComputerName
$Computer = New-Object -Type PSObject -Property @{
Computername = $ComputerName #add the property computername
Name = $Win32_OperatingSystem.CSName
Win32_BIOS_SerialNumber = [string]$Win32_BIOS.SerialNumber
Win32_ComputerSystem_Manufacturer = [string]$Win32_ComputerSystem.Manufacturer
Win32_ComputerSystem_Model = [string]$Win32_ComputerSystem.Model
#Win32_ComputerSystem_NumberOfLogicalProcessors = [int32]$Win32_ComputerSystem.NumberOfLogicalProcessors
#Win32_ComputerSystem_NumberOfProcessors = [int32]$Win32_ComputerSystem.NumberOfProcessors
Win32_ComputerSystem_TotalPhysicalMemory = [long]$Win32_ComputerSystem.TotalPhysicalMemory
Win32_ComputerSystem_TotalPhysicalMemory_GB = [float]($Win32_ComputerSystem.TotalPhysicalMemory / (1024*1024*1024))
Win32_OperatingSystem_Caption = [string]$Win32_OperatingSystem.Caption
Win32_OperatingSystem_CSName = [string]$Win32_OperatingSystem.CSName
#Win32_OperatingSystem_OSArchitecture = [string]$Win32_OperatingSystem.OSArchitecture
#Win32_OperatingSystem_SerialNumber = [string]$Win32_OperatingSystem.SerialNumber
Win32_OperatingSystem_ServicePackVersion = [string]$Win32_OperatingSystem.ServicePackMajorVersion + "." + [string]$Win32_OperatingSystem.ServicePackMinorVersion
Win32_PhysicalMemory_Capacity = ($Win32_PhysicalMemory | ForEach-Object { $_.Capacity } | Measure-Object -Sum).sum
Win32_PhysicalMemory_Capacity_GB = (($Win32_PhysicalMemory | ForEach-Object { $_.Capacity } | Measure-Object -Sum).sum / (1024*1024*1024))
Win32_Processor_Count = [int]$Win32_Processor.Count
Win32_Processor_NumberOfCores = [string]$Win32_Processor[0].NumberOfCores
Win32_Processor_NumberOfLogicalProcessors = [string]$Win32_Processor[0].NumberOfLogicalProcessors
#Win32_Processor_Description = [string]$Win32_Processor[0].Description
Win32_Processor_Manufacturer = [string]$Win32_Processor[0].Manufacturer
Win32_Processor_Name = [string]$Win32_Processor[0].Name
} ## end new-object
$output+=$Computer #combine all the "$computer" to "$output"
Else {
"$ComputerName ping failed."
$output
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support

Not able to put data selection condition in data selection tab of infopakag

I was loading data from data source as data mart ( export data sauce from ODS) to other ODS.
when I tried to do delta Initialization with data transfer , I am not able to put data selection condition in data selection tab of infopakage.
when I choose Full Update in Update tab . It enables data selection fields in data selection tab. and I could put the condition.
I have checked in transfer structure as well , the fields are marked for selection.
Please advice .
Please tell me what could be the reason for this problem

Ashutosh,
As you are doing delta upload the data selection tab will be disabled, if you want to do the selective load then you need to do init update with your selection.
When you do the full updtae then definitely the data selection tab will be enabled for all the objects.
Hope this helps...
*******Assign Points if it helps********
Thanks,
Gattu

Itunes purchase wont stay off my phone

I'm running iOS 7 on an iPhone 5s. Old song purchases wont stay off of my phone. I've unselected 'show all songs', 'automatic download', etc... I've logged off from iTunes app, and re-logged on. This technique has made the songs "go away", but once I shuffle songs or connect to bluetooth, these songs reappear. I cannot figure this out. Any hints?

Hello simplyamazingyu,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
If you go to music > songs > and store does it open?
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Restoring your iOS device
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. Select the Summary tab, and click the Restore button.
Click Restore.
iTunes may prompt you with a software license agreement. If you click Agree, iTunes will download the iOS software file (.ipsw file) before restoring.
After a restore, the iOS device restarts. You should then see "Slide to set up". Follow the steps in the iOS Setup Assistant.
If needed, restore your device from a previous backup.
Best of luck,
Mario

View objects from different Schema from Web Object Browser

I am logged in as dba and try to view the tables of another schema.
However in the object browser I can only select my own schema.
This happens with whatever user I use.
From sqlplus I can access or create tables for another schema without any problems.
Is this not supported or am I doing something wrong?
Thanks for the help.

Can you assign multiple schemas to a workspace in the XE version of HTML DB?
I haven't found where to do it.
Is it not possible because there aren't really workspaces in this version?

[Duplicate:ignore]Mapping Errors: no table selected, but unable to select

Sorry Duplicate Posting. I am unable to delete.
[Lost Cause] Mapping Errors: no table selected, but unable to select one
Message was edited by:
RWBerg

Update: I unmapped connections to the problem causing table object (Group), and deactivated the descriptor. After deleting the named query dependencies, the mapping report succeeded.
However, when reactivating the mappings from the other descriptors they would still not allow me to select a reference table for the Groups class. The same is true going out to those descriptors from the Groups class.
Does anyone know why the reference tables are not populating the drop-down on the "Table Reference" tab?
Screenshot available [more can be provided as needed]: http://www.rwberg.org/ref/help/oracle_forums_ss_mapping_11-29-07.PNG

Object selection wont stay on selected object

Similar Messages

Maybe you are looking for