Object Services - What are the space restrictions?

Hi experts -
Our finance team wants to start saving documents in Object Services. Can you tell me the space restrictions, if any?
Many thanks!
Mark

Hi Mark
If they are using Create Attachment as a storage area, I would strongly suggest they look at configuring ArchiveLink (it should be a greyed out area called Store Business Document in object services) so they can store securely. The GOS create attachment option is not recognised as a secure document storage area and its just designed for adhoc working documents. Its also an area that can be deleted by basis as part of the system cleanup if they run a specific transaction.
They are no hardcoded limitations, but in our experience, the limitations kick in with individual files sizes in excess of 100MB however this will be dependent on the SAP architecture, bandwidth as its largely to do with the file size being so large that the file times out before it can be completed copied to the server.
Regards,
Athol

Similar Messages

What are the space requirements for creation of a Oracle database.

Hi,
How much space do we require to create a database, say the data
size is 2GB.., is there any estimate like the space should be 3
times or 4 times of the data size..?
Regards,
G. Rajakumar.

It really depends on how you set up your tables. Storage
parameters, block size, etc etc.

What are the network restrictions for a Tuxedo MP configuration between the Master and Backup? Can they be on separate networks?

We are migrating from one data center to another and want to keep 100% uptime during the process. The two data centers are on separate networks but in the same city. I want to migrate the Master and the Backup to the new data center with zero downtime.

Hi Harvey,
Tuxedo machines just need TCP/IP connectivity. So machines can be in different subnets, different Ethernets, etc. I know of one customer that has a 13 machine MP configuration that is distributed across the entire country. So as long as there is a route between the machines, you should be fine. Here's an old but probably useful white paper on bridges, multiple networks, etc., from Aurora Information Systems: "Exploring High Availability Issues with BEA Tuxedo and Third Party High Availability Software". While it's a pretty old white paper, from what I can see most of it is still applicable.
Regards,
Todd Little
Oracle Tuxedo Chief Architect
PS You should write some articles about what you've been up to and how you've accomplished it!

What are the lock modes in Lock object

What are the lock modes in Lock object ?
what are the divfferences between
Exclusive , cumulative
Shared
Exclusive , not cumulative
Could any body explain what happens in each table lock ?
How the lock consists ?

HI
Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm</a>
Regards,
Gunasree.

What are the objects that support variables?

What are the objects that support variables?

Using Variables: The Variable Wizard and the Variable Editor
Definition
Variables are parameters of a query that you defined in the Query Designer and that are filled with values when you execute the query or Web application. They serve as a store for characteristic values, hierarchies, hierarchy nodes, texts and formula elements, and can be processed in different ways.
The processing type determines how a variable is filled with a value for the runtime of the query or Web application.
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
Variables are reusable objects. This means that when you define a variable for a query in the Query Designer, this variable can be used in all other queries. Variables are not dependent on the InfoProvider, only on the InfoObject. A variable that you define for an InfoObject is available in all InfoProviders that use this InfoObject.
Use
Variables enable you to customize queries flexibly (parameterize the query) possible. If you use variables in the Query Designer, do not select any fixed characteristic values, hierarchies, hierarchy nodes, texts, or formula elements. Instead, set up variables as place holders. These are then filled with values when the query is running (when you insert the query into a workbook, when you refresh the workbook or when you execute the query on the Web. You can use one query definition as the foundation for many different queries if you use variables.
You want to create one query for all the people responsible for customer groups, who each only evaluate the data for one customer group. In the Query Designer, you insert a variable for the characteristic u2018customer groupu2019. Just before the query is executed, decide for which customer group(s) you want the query to apply to.
There are two tools in the Query Designer for designing and changing variables.
The variable wizard takes you step-by-step through the process of defining a variable. Each individual step is context-sensitive and is adjusted according to the combination of variable and processing types used. This means that the variable wizard only offers the selection options that are permitted for that combination of variable and processing types. For more information, see Defining Variables with the Variable Wizard.
The variable editor dialog box offers all of the selection options for changing an existing variable. The individual fields in the dialog box show the settings affected in the variable. You can change these settings here. If you want to make the changes using a step-by-step process with explanatory texts, you can jump to the variable wizard using . For more information, see Changing Variables in the Variable Editor.
Integration
The variable wizard and the variable editor are functions in the Query Designer and are context-sensitive.
In principle, the two dialog boxes appear wherever you can enter constants (that is, values) in input fields. One of these input fields is the Entry of Variables checkbox. If you select this option, the following options for using a variable appear, instead of a fixed value:
·        The variables that are available appear in the dropdown box for the input field. You can select a variable from the dropdown box.
·        The symbol Change Variable appears next to the Entry of Variables checkbox. You can change the variable using . The Variable Editor dialog box appears.
·        The symbol New Variable appears next to the Entry of Variables checkbox. Choose if you want to create a new variable. The Variable Wizard dialog box appears.
By way of an example, when defining conditions for the value limit of the condition, you can not only enter fixed values but also formula variables. Mark the Entry of Variables checkbox and you can then use the options described above. The settings are context-sensitive so that the formula variables that only those formula variables that are available appear in the dropdown box. The variable wizard is set up automatically in the same way for entering formula variables.
You can also get to the variable wizard and the variable editor from the context menu of those objects for whose values you can define variable placeholders. From the context menu, choose New Variable. The SAP BW Variables Wizard appears. In the context menu for variables that have already been defined, you can choose Edit. The SAP BW Variables Editor appears.
In the InfoProvider objects dialog box, you select a characteristic (for example, Order) and from the context menu, choose New Variable. You reach the variable wizard, which is already set up for you to enter a characteristic value variable.
In the InfoProvider objects dialog box, you select a characteristic value variable and from the context menu, choose Edit. You reach the variable editor where you see all of the settings for the variable. You can make changes to the variables here.
Variable Types
Definition
The type of variable being used. This determines the object that the variable represents as a placeholder for a concrete value.
Structure
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
·        Characteristic Value Variables
Characteristic value variables represent characteristic values and can be used wherever characteristic values are used.
If you restrict characteristics to specific characteristic values, you can also use characteristic value variables. See, Restricting Characteristics.
·        Hierarchy Variables
Hierarchy variables represent hierarchies and can be used wherever hierarchies can be selected.
If you restrict characteristics to specific hierarchies or select presentation hierarchies, you can also use hierarchy variables. See Selecting Hierarchies
·        Hierarchy Node Variables
Hierarchy node variables represent a node in a hierarchy and can be used wherever hierarchy nodes are used.
If you restrict characteristics to specific hierarchy nodes, you can also use hierarchy node variables. See Restricting Characteristics: Hierarchies
·        Text Variables
Text variables represent a text and can be used in descriptions of queries, calculated key figures and structural components.
You can use text variables in the description of calculated key figures, restricted key figures, selections and formulas when you create them. See Defining Calculated Key Figures, Defining Restricted Key Figures, Defining Selections, and Defining Formulas.
You can change the descriptions in the properties dialog box. See Query Properties Calculated Key Figure Properties Restricted Key Figure Properties, and Selection/Formula Properties.
·        Formula Variables
Formula variables represent numerical values and can be used in formulas. See Defining Formulas.
In addition, numerical values are used for selecting exceptions and conditions and you can also use formula variables here. See Defining Exceptions and Defining Conditions
You can use a formula variable for the interest rate in order to process the current interest rate, after you have executed the query or Web application.
http://help.sap.com/saphelpnw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm_

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

While transporting the objects from dev to q or production what are the err

Hi all,
While transporting the objects from one system to another what are the errors we get?
Thanks
Kiran Kumar

Hi Kiran,
The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
Best Regards,
Matt

What are the avlble methods to Measure Quality of Customer Service in SAP

Hi
We are in Retail business, and I would like to know what are the available methods to measure the Quality of Customer service in SAP CRM. Help us to get the required information?
Best regards

Venkat,
there are two aspects to this :
1. The overall philosophy ( for want of a better word ) of QOS for any service - there is a lot of thought that has gone into measuring QOS for a service - hence I would say that QOS is more related to the specific service than the entire domain.
2. Measuring the quality of service in terms of what ? - there are a lot of KPIs for the same some of them could be :
Average time taken to service a customer
Does the customer get all that they want in the store or only some of the items ( partial fill)
Are the products neatly arranged and easy to access
average time taken for the customer to get what h/she needs
customer facilities like parking / childern play area etc
Availability of attendants / helpers for the customer
home delivery
credit options... etc etc and the list could go on endlessly ... as you can see it is very specific to the service being provided and accordingly you will get KPIs for the same.
As for measauring the same - there are umpteen ways to do the samedepending on the place it gets recorded - you can have surveys / web surveys / POS details etc etc - what is it that you are looking for specifically ?
Arun
Hope it helps....
Message was edited by:
Arun Varadarajan

What are the precautions to be taken to move the objects from BI Dev to Pro

What are the precautions to be taken to move the objects from BI Dev to BI Production.
how to move the objects from BI Dev to BI production.
Thanks
sapsdnhelp

Hi,
Please check out this PDF
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b1d20e-c1e8-2c10-d9b9-d48eb3a83d89?QuickLink=index&overridelayout=true
Hope it helps
Regards,
AL

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the settings for automatic service PO?

What are the settings for automatic service PO?

Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you!

What are the different messages that OCOD may return for a web service requ

Hi,
Please give me feedback on the questions below, concerning the limitations of web service, and messages which may return.
1) What are the different messages that OCOD may return for a web service request? I need all the messages of all the scenarios which OCOD can meet, for example:
- If the file is rejected (Error message)
- If the file is accepted (to clarify that the records have been created)
- if the application is unavailable (maintenance or web service is down)
2) How many request can we send simultaneously, and how many records we can make per second?
Best Regard,

Have a look here Jquery slideshow tutorial for beginners | WEBTUTS

What are the best practies for naming symbols (spaces OK,etc.)?

What are the best practices for symbol naming for ease, flexibility, & to avoid "gatchas" down the road?
Does it make any difference if one includes spaces in the names of symbols? Are there any widely followed conventions for naming them like using camelCase or underscores?
Thanks!

Hi Gina D 3333,
Best-practice file-naming conventions for PDF files are the same as for any other file. I found this article on Apple's website that contains some useful pointers to consider when you're naming files that will be used on multiple platforms: OS X: Cross-platform filename best practices and conventions
I hope this helps!
Best,
Sara

What are the order of interactive objects

If you have two interactive objects on top of each other what are the rules regarding which shows up on top.
for instance if you have a MSO slideshow and you try to put a button on top it will disappear behind the MSO on the iPad, I can work round this by putting the button inside all states of the MSO
But are there any guidelines about which form of interactivity out ranks another?

In most instances, the z-order determines which overlay stays on top when overlays are in a stack. In your example, you mention that when you place a button on top of an MSO, the MSO covers the button. That's not my experience. In a quick test, I overlapped buttons and an MSO, and I moved the top buttons to the front and the bottom buttons to the back. Here's what I got:
In this example, DPS honors the z-order. You can interact with both the buttons (even if they're hidden) and the MSO.
When you overlap interactive objects such as image sequences, inline videos, and slideshows, the z-order of the source objects determines which objects move to the front. Activating an overlay brings it to the front of inactive overlays. If multiple overlays are activated, the z-order determines which object is in the front.

What are the differences between Oracle Service Bus 10g and WLI 10g?

Hi,
To me both Oracle Service Bus 10g R3 and Weblogic Integration 10g seem to offer the same functionalities for implementing an enterprise middleware.
I would be grateful if someone could:
1. provide me with the two products' differences.
2. describe what their roadmap is?
3. what are their positioning in the Oracle product catalog? Are they both members of Oracle SOA Suite? Fussion Middleware?
Thanks a lot,
Best regards,
Babis.

Thanks everyone for taking the time to reply,
Eduardo: the answer to your questions are that all the flows will be short-lived but if we can make long-lived flows then we might consider developing them. We would need to persist the state of the flow somehow.
I understand that some of our requirements would be better accomodated by WLI or bpel but we don't have an option but only to use OSB.
So, do you think we could overcome the stateless nature of OSB by:
1. writing to appropriate tables and reading from there and calling plsql procedures from the flows
2. using JMS queues.
In detalis:
1. Regarding the writing/reading from Databases (in our case it would be oracle 10g R2 - probably RAC), is there something like a Database control in WLI, which we could use in OSB? What i have seen are using xquery execute-sql function or a JCA DB adapter but both of them seem to me not very easy to use. Is there another option?
2. Regarding the JMS, in case that i want:
a service that writes to a JMS queue what are the servicetype and transport that i should use?
a service that reads from a JMS queues what are the service type and transport that we should used?
Any information that you may share with me in the design and implementation of the above would be great.
Thanks a lot.

Object Services - What are the space restrictions?

Similar Messages

Maybe you are looking for