Object Type & Catalog profile
Hi PM Gurus,
I have created 100 object type in my company, now i want to create catalog porfile against that.Is it right to copy all the 100 object type and create catalog profile against those.either there is any other way for creating catalog profile.What is the best way to shorten our task by consider the total asset family
AR
Hi Amit Rana,
You have created 100 object type in your company,the object type & class can be same.Say example Pump,Motor,gearbox like that.If you create the Catlogue profile with this 100 object type then it will be very critical for the users to search & select the object list in those 100 list.
So better you can create the object part in catlogue specific to the business identification say example in object type if you create as centrifugal pump,reciprocating pump.then no need to create 2 different object type in catlogue,you can specify as the Pump only.
So it is depend on how it is user friendly to your users to classify the fault.
There is no hard & fast rule in this.But try to classify as minimal.
Regards,
Raj.
I have created 100 object type in my company, now i want to create catalog porfile against that.Is it right to copy all the 100 object type and create catalog profile against those.either there is any other way for creating catalog profile.What is the best way to shorten our task by consider the total asset family
AR
Similar Messages
-
Option 'Maintenance Order' missing in 'Allowed Object Types' tab in IMG of User status Profiles
Dear All
I have created a User Profile using T-Code OIBS.
Now I want to assign that User Profile to Maintenance Order. But in the 'Allowed Object Types' tab, the option "Maintenance Order" is missing due to which I am unable to assign it to Maintenance Order.
Could anyone tell how to add the option "Maintenance Order" in 'Object Types'.
Thanks in advance.
BKHi Peter
Thanks for your help.
I just found that in t-code BS13, the object categories ORI and ORH exist but 'No Status Profile' check is marked against them. That is the reason why the system is not showing the 'Maintenance Order' as an option in Allowed Object Types.
Thanks a lot !
Best Regards,
BK -
OBIEE 11G Web Services - How to find Catalog Object Type
Hi All,
I am trying to access the Web Catalog objects available in OBIEE 11.1.1.5 through the Web Services API. I am able to read object names in "/shared" folders using the getSubItems() web service. My objective is as follows
1. Categorize catalog objects based on their type (Analysis, Agent, Action, Condition, etc...)
2. If possible, read the presentation column information that each object is using
The ItemInfoType structure only provides for types - Folders, Link, Missing, Object, etc... and does not help me in identifying the actual catalog object type. Any help on this regard is appreciated.
Thanks,
Raj.Is there any solution for this? We also face similar issue recently...
-
Is there a way set the object type defaults in the Profile Matchup (PEPM)?
Our users would like to have the Profile Matchup (PEPM) default the object type to P (Qualifications profile of Person) and S (Requirements profile of Position). Currently launching PEPM defaults to U (user) and S (position). Is there a way to change the default value from U to P using a PID? or some other method?
Thanks in advance,
- LoraHi Lora,
I can't think of a way without changing the program behind it.
Regards,
Priya. -
Sender object type for price catalog in Generation of BizPackage
what is sender object type for price catalog in Generation of BizPackage and BIU under bizPackage Generate (SAP B1iSN Tools)
i should put PRICAT (the msgtype in the model view or PRICAT02 in standard basic IDoc types)
Thanks
elsonIf i correctly understood your problem, i think you have to manage (in your trasformation) the section between <Items_Prices> and </Items_Prices>.
<?xml version="1.0" encoding="utf-8" ?>
<BOM xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms">
<BO>
<AdmInfo>
<Object>4</Object>
<Version>2</Version>
</AdmInfo>
<Items>
<row>
<ItemCode>AAAAAA</ItemCode>
<ItemName>BBBBBBBBB</ItemName>
</row>
</Items>
<Items_Prices>
<row>
<PriceList>1</PriceList>
<Price>27.400000</Price>
<Currency>EUR</Currency>
</row>
<row>
<PriceList>2</PriceList>
<Price>0.000000</Price>
<Currency>USD</Currency>
</row>
</Items_Prices>
<ItemWarehouseInfo>
<row>
</row>
</ItemWarehouseInfo>
<ItemPreferredVendors>
</ItemPreferredVendors>
</BO>
</BOM>
BR -
Status profile not allowed for object type
hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
RameshRamesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type. -
Object Types in User Status profile for Investment managment
Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
Regards
Rama Shanker SharmaDear Ram,
User Status can be maintained in the system as foll
Maintain the Status Profile first in OK02
Status no Status Short text Initial status flag lowest Highest
10 NBU Not Budgeted ^ 10 20
20 BUD Budgeted 10 20
in
Status
NBU
maintain the required fields as required by your process requirement
Material purchase order
Material purchase requisition
Partially release project
Release etc
and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
Repeat the same logic for
Status
BUD
I hope this solves your problem, if not please write in detail your requirement.
Regards,
Vikat Verlekar -
CODE GROUP( Catalog Profile )
Hi Sapient,
Is it possible to assign more no. of code group with a single catalog type like damage ( Catalog type "C" ) for a single equipment only.If it is possible then can anyone tell me how to creat the same and display it.
Regards,
AR.
Edited by: Amit Rana on Apr 14, 2009 10:26 AMHi,
You can creat multiple code groups within same catalog.But when you define catalog profile for technical object you need to include all those code groups which you want to be available.If you want to include multiple then you need to put each code group against related catalog in catalog profile or add * for given catalog to include all code groups defined for damage catalog.
regds,
atul -
No catalog profile has been maintained for notification category
Hello
I have created the Catalog Profile with catalog code groups and assigned the codes..The profile have been maintained in technical object masters .No catalog profile is maintained for any notification type. Now when I am creating a notification M1 it says "No catalog profile has been maintained for notification category M1"...It copies the catalog profiel of the technical object after I maintain the technical object in Notification .
I want to avoid this info message..How do I avoid this message for the notifications without catalog profile...
The message details are:
No catalog profile has been maintained for notification category Z1
Message no. IM005
Procedure
Please maintain the corresponding entries for the catalog profile and allocate this catalog profile to the notification type.Hi Shaikh,
This message can not be skipped with any SPRO settings because this message
Viz.: < ELSE.
CLEAR E_RIWO02.
MESSAGE I005 WITH I_TQ80-QMART RAISING INITIAL_REPORT_CAT.
ENDIF.>
is hard coded in program LIWO2U05.
If at all you want to bypass this message then you need to change the above mentioned program for bypassing the message.
Sundar -
Change catalog profile in QM02 usinf workflow BUS2078
Hi All,
I have to change the catalog profile when a QN is created from transaction QM02. The system generates a workflow in the background using bus2078. The catalog profile by default is always copied from the material master and then task. I want it copied from the parent QN.
How do i go about changing BUS2078?
Regards.Do you want to change BUS2078 or the QN?
BOR object such as BUS2078 are changed using delegation see Extending Object Types: Inheritance and Delegation - SAP Business Workflow (BC-BMT-WFM) - SAP Library
If you only need to change the QN, link a function module to the event raised when the QN is created using transaction SWE2 or maybe check for a user exit or a BADI to do the same. -
"" No authorization for number range object type GTIN and activity SHOW ""
While creating number range in number range administration for GTIN system showing the error
"" No authorization for number range object type GTIN and activity SHOW ""
Pls help me to solve this issueHi ,
Please check roles for user assigend as [ This is for super administrator ]
SAP_AIN_ADMINISTRATOR
SAP_AIN_OER_ADMINISTRATOR
SAP_AIN_SUPER_ADMINISTRATOR
SAP_AIN_SUPERVISOR
SAP_AIN_WORKER
and profiles assgined as
SAP_ALL
SAP_NEW
Hope it will helps
Thanks .,
V.Rangarajan -
Error : software component version does not support this object type.
Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PMHi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles : Process Definition
Service Definition
Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed -
What is the Object type for Usage Decision
I am creating a status profile for UD, that is, If no result recording the no Usage Decision. Which object type should I assign against this newly created status profile?
Unless I assign a Object type, I cannot assign business transactions.
Vineeth VargheseHi Vineeth,
The required object types are insp. lot w/o plan or char, insp. lot with plan and char, insp. lot with plan w/o char.
I can suggest you to go through the following link, its beautifully explained step by step with screenshots.
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20fbc091-ea3a-2b10-f0a3-877ffbf36436?quicklink=index&overridelayout=true]
Hope this solves your issue. -
Appraisals object type VA and auth object P_HAP_DOC
The system is running 2005 version. While running
APPCHANGE tcode the program ignores values in PD Profile
for object type VA. Furthermore the program bypasses
the check against P_HAP_DOC object. Any hints why this happens? F.ex 2005 IDES system we have performs these checks ok.Hi Carlos,
The Otype VA - Template, VB- Criteria group and VC - Criterion.
The hierarchy is as follows
VC is blow VB is below VA.
The objects as such wil be created in the HRP1000 as usual.
In addition, there are tables which starts with HRHAP* which holds the appraisal document related data.
But the table contents cannot be seen from SE11 or SE16. Create a SQ01 Quick viewer query for the Database tables.
Hope this helps.
Reward points if it helps you.
Regards,
Subbu. -
Hi gurus,
I am just trying to create Catalog Profie. Clent Requirements is foe example i am cretaing one catalog of crane . Crane as catalog profile. Now i ahve maintained all object parts for crane using qs4, similarily damage and causes.
now when i am updating history in Notification, I have selectedone object part let say hose , so damage and causes related to hose only should come in drop down.so that only user should update history for hose only not for others. here i am getting complete list. how can i manage it.Hi
Its not possible in standard SAP....
I am not sure how much this gonna be useful for u....
Object defects, damage, cause.... dont not have co-relation.... every thing has to be entered and saved separately...
If u say... they have relation... then we can do the way u want...
All these are individual things... which u club together in as catalog profile
- Pithan
Maybe you are looking for
-
Monitor transaction is no longer available
Hi Forum members, When I do the CM on IC, I find a message that 'Function no longer available or terminated'...something like that..... Could you please give input as to why..... thanks.....
-
When will 10.2 Software come on Z10?
-
Deleted iTunes - pleassseee help!
Due to a virus, my computer had to be completely wiped out. Unfortunately, I was unable to back-up iTunes or do anything before having it fixed but I do still have everything on my iPod. How can I get all of my stuff off of my iPod on back onto a bla
-
I can t send via email my document
I can t send my document page by email.
-
Transfer:WM-managed non-HU managed stor location to WM and HU managed sloc
Dear All, I have one storage location that is Warehouse managed and non-HU managed. I have another sloc that is warehouse managed and also HU managed. I want to move stock from the first to the second. I use HU04 and specify the destination storage t