Object variable help - Note 1131320

Good Morning experts!
I've had a situation where an install was done and when modifying an application in the admin console, we get an error with object variable or object not set.  While searching the notes, I found note 1131320 that states that you should replace the admin templates under webfolders.
I did that.  However, there's a step that it asks you to do that I'm not very familiar with.  Step 5 states to publish all reports.  Anyone know how to do that off the top of their head?  I could figure it out over the weekend, but we have some deliverables that are being held up!
Your help is greatly appreciated!
Barton

The note you reference was posted for updgrades from versions 5.X to 5.1 SP1 and I wondered if you had upgraded to version SP3 instead of 1.  The process that the team suggests should have included the following:
You have to go through the Web Admin interface to Publish All Reports.
1. Enter the BPC Admin Web interface
2. Under Web Admin Task Click Publish Reports
3. Select all of the reports and click the green check mark to publish the reports.
This then pushes the new templates for use in the web interface. Hope this helps.
Edited by: Petar Daniel on Oct 6, 2008 10:50 PM

Similar Messages

  • Batch insert from object variable

    Any way to do this excluding the foreach loop container?  I have millions of rows and if it goes through them 1 by 1 it will take hours maybe days.  How can you do a batch insert from an object variable without putting the sql task inside
    a foreach loop container?
    thanks,
    Mike
    Mike

    I know how to use the dataflow task but it will not work with what I am trying to do as far as I know.  The script I am running is against a netezza box that creates temp tables and then returns a data set that I store in an object variable. 
    I then want to take the data from that object variable and batch insert it into a table.  The only way I can see this being done is by looping through the record set in a foreach loop while mapping the fields to variables and inserting records one
    at a time like I am doing in the screenshot above.  This takes way to long to do.  I am trying to figure out a way to do a batch insert using the data in this object variable.  Is this possible?  I am using SSIS Version
    10.50.1600.1
    thanks,
    Mike
    Hi Mike,
    Provide more details why you cannot use the data flow task for the processing.
    Let me repeat . Loading millions of records in object variable will not work. 
    SSIS Tasks Components Scripts Services | http://www.cozyroc.com/

  • Error in the Input scchduled.Object variable or with block varaible not set

    Hai Experts ,
    In the input schdueld , data is not accepting ..
    Its shows error : Object variable or with block varaible not set
    Please help..
    Regards
    Daya.........

    Hi SAP collegues,
    At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
    It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
    This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes.  Please check the following.
    Note before doing the following, close all other open Excel and BPC sessions.
    Within Excel go to File à Options
    Select the Add-Ins option on the left
    Select the <<COM Add-ins >> option in the Manage drop down, and click Go
    Make sure that the Planning and Consolidation option is selected.  If not, mark this box and click OK.
    If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
    Let me know if you have any queries,
    Kind Regards,
    robert ten bosch

  • Object variable not set (Error 91) in Input Enabled query

    Hello,
    I'm having the following issue.  I have created an input enabled query and included it in a planning workbook.  Every time I open the workbook or query, and I got to an input enabled cell, I get the error below:
    Object variable not set (Error 91)
    This client has not used planning workbooks before.  The system is on 7.10 SP10 for Bex Analyzer and SAP Gui 7.10 Patch Level 13. 
    I'm not finding any relevant so far in SDN.  Any help anyone can provide is greatly appreciated.
    Thanks,
    Senthil

    Hello,
    Just wanted to let you all know that this issue has been resolved after updating my SAP Gui to 7.2 Patch Level 4 (Patch Level 5 was causing some other issues so I decided to stay at Level 4).
    Thanks,
    Senthil

  • Error: Object variable or with variable not set while accessing

    Hi Friends,
    I am facing 'object variable or with variable not set' Error while opening BPC Excel.
    I have done, In Excel 2007, go to Excel Option -> Add-Ins -> Manage: COM Add-ins and Go...
    You look "BPC COM" disable and need enable again.
    But I am getting same Error message again and again. Please help me...
    I did BPC uninstall & install but still error massage poping
    Thank you in Advance

    Hi Kumar,
    I doubt if you are following the below steps. Please confirm. Thanks
    1. Open your normal Excel.
    2. Check for Planning and Consolidation tab on the top ribbon.
    3. I assume this wouldn't be available for you.
    4. If this is not present, open the Excel Options
    5. Click on Add-Ins and check the Active Application Add-ins
    6. Is Planning and consolidation present in it?
    7. If not, select "Disabled Add-ins" in the drop down below besides "Manage".
    8. Click "GO"
    9. Select the Planning and Consolidation add-in from disabled add-ins and "Enable" it.
    10. Check once again if this add-in is prersent in "Active" add-ins .
    11. Now close and re-open excel
    12. The Tab should be present now (Planning and Consolidation)
    Regards,
    Sanjeev

  • Object variable or With Block variable not set

    Hi - We have saved a working input schedule to a new name and modified it to use for another company.  There is a report tab to bring down the historical units from BPC, a tab to trend the history, and a tab that references the other two tabs to forecast the units into the future and send the forecasted units back up to BPC.  The input schedule that was saved to a new name and modified works fine until we attempt to Send and Refresh the active worksheet on the forecast tab.   When we do so, it indicates the number of records that will be sent, but when it attempts to Process the upload to BPC we receive an error message that indicates  Object variable or With Block variable not set  and no records are sent to BPC.
    We have retested the original input template that was copied and the original template still transfers data successfully to BPC.  We have also tried starting with a blank input template and copying in the formulas from the working template and we still get the same error message.  
    We have read several postings on this error and it seems to be a pretty general error, and so far none of the suggestions have worked for us.  One suggested checking for special characters, but the only non alpha non-numeric characters used are dashes in the values of one of the dimensions and spaces and underlines in the formulas used to forecast the units, but both of these are present and don't seem to cause any problem in the working input schedule. 
    We are currently on BPC 7.5 SP6 and using Excel 2010.
    Any help would be appreciated.

    >Note 1494285 seems to be in reference to BPC for Microsoft and we are using NetWeaver.
    Sorry, 1513080 is for NW (there's link to it in bottom of 1494285) :
    - Currently only BPC 7.5 NW SP05 and above support Office 2010
    - Note: BPC NW 7.5 NW cannot work on office 2010 (64-bits), office 2010 (64-bits) is not supported.
    Check your proxy settings (note 1592560: Getting "Error 91 Object variable or with block variable after upgrade to SP06" in the Excel Client.)
    Try 1576893: After upgrading to SP06, the EVDRE reports stop working.
    PS. Maybe I wrong, but some problems with 2010 Office clients in our system dissapear after patching to SP08.

  • "Object Variable or With Block Variable not set" Error on Adobe Presenter 8 Ribbon on PPT 2010/2007

    Returning back from Adobe training at KEDRIYA VIDYALAYA no 1  Jalhalli Bangalore when I started Powerpoint to use Adobe Presenter 8  I am getting : "Object Variable or With Block Variable not set " error on clicking any of the menu features of the Presenter Ribbon. My Config are :
    i)             WINDOWS XP SP 3
    ii)            POWERPOINT 2007 / 2010 ( for both same error is coming)
    iii)           MS XML Library 4.0 installed.
    iv)           Adobe Presenter 8
    I am using all liscenced copies of softwares.
    Hardware specs are also as per Minimum Adobe standards.
    I Have tried a lot removing Data Execution Prevention Mode , but all in vain the problem still exists
    Why is this happening. Please help.
    Kamal K Gupta
    PGT Comp. SC.
    KV No. 2 Srivijaya nagar

    This is not really a "Downloading, Installing, Setting Up" question; you may get better help if you ask in the Presenter forum.

  • Object variable or With block variable not set (Error 91)

    I am not a developer, however i have to help to run a VB program.
    when using a local administrator to run this program there will be error :
    Object variable or With block variable not set (Error 91)
    however using a DOMAIN Administrator to run without problem.
    any idea

    Do you have the source code? The error itself is a nullreference error. It means the code is trying to use some object to access a property of method of that object, but the object is currently null so it fails. The fact that it runs different when you run
    as a domain admin versus local admin could mean that it does something via a network location or resource, and when running as a domain admin, it has access to that resource and succeeds, but the local admin doesn't have access to the needed resource, and
    the code doesn't check to see if the object is null before using it. If you don't have the source code, then it will be difficult to fix, other than giving the local admin the ability to access whatever it is the program is looking to access.
    Matt Kleinwaks - MSMVP MSDN Forums Moderator - www.zerosandtheone.com

  • Error in BatchLoad process - Object variable or with block variable not set

    Hi All,
    We are working on FDM version 11.1.1.3 with Essbase as a target system.
    To automate the data load process, we are loading the batch loader feature.
    I have taken the backload script from admin guide and it is working fine in our test environment.
    When, I am trying to use the same script in our QA environment, we are getting the below error message-
    Error: An error occurred running the script:
    *91 - Object variable or with block variable not set*
    At Line: 24
    QA environment has same version as Test environment (11.1.1.3). In QA, it the same script which I am using in Test environment.
    Please help us on this issue. Any help will be highly appreciated.
    Thanks & Regards,
    Mohit Jain

    Hi,
    As suggested by you, I have placed the code given by you and now my scripts looks like-
    'Declare Local Variables
    Dim lngProcessLevel
    Dim strDelimiter
    Dim blnAutoMapCorrect
    Dim BATCHENG
    Set BATCHENG = CreateObject("upsWBatchLoaderDM.clsBatchLoader")
    BATCHENG.mInitialize API, SCRIPTENG
    'Initialize Variables
    lngProcessLevel = 12 'Up-To-Check
    strDelimiter = "~"
    blnAutoMapCorrect = 0
    'Create the file collection
    Set BATCHENG.PcolFiles = BATCHENG.fFileCollectionCreate(CStr(strDelimiter))
    'Execute a Standard Serial batch
    BATCHENG.mFileCollectionProcess BATCHENG.PcolFiles, CLng(lngProcessLevel), , CBool(blnAutoMapCorrect)
    But still, I am getting the same error.
    Have I placed the your given code at wrong place? please help me on this.
    Thanks a lot for your help!!
    Thanks & Regards,
    Mohit

  • BPC 4.2 Optimization error (object variable or with block variable not set)

    Hi All,
    I am getting the following error when I try to optimize application from the front end:
    Run-time error '91':
    Object variable or With block variable not set
    From the back end the optimization works just fine. This is the new application I created from the AppShell. As soon as I created this new application set, I tried to run optimization and I am getting this error. Optimization in the AppShell works just fine. I wonder what the problem is since this is a brand new application set. I tried a few things all day yesterday and day before but in vain.
    We are using BPC 4.2 (OutlookSoft CPM). Any help is greatly appreciated, the sooner the better.
    Thanks in advance!

    Depending on your version of 4.2, here are two possible issues and remedys.
    Possible issue #1
    Do you only have 1 application in the appset? - Add another application.
    Possible issue #2
    This problem will occur if you have copied 4.2 SP2 Apshell or copied an existing appset.
    This happens when a table named tblAdminTaskMessage exists and a stored procedure named INPUTMESSAGE does not exist.
    The table and stored procedure are created when you run optimize for the first time and when you make copy of Apshell that has been optimized once, it can copy the table but it cannot copy the stored procedures.
    The workaround is to delete the tblAdmintaskMesssage table in SQL Enterprise Manager within the problem appset.
    Hope this helps.

  • FDM Error - object variable or with block variable not set

    Hi all,
    When i try to configure the authentication provider in the fdm load balance manager, I've got an error "object variable or with block variable not set".
    version: 11.1.2.1
    If anybody can help me to resolve this. I will be thankful to him/her
    Waiting for replies.
    Regards,
    Edited by: Antoine on Aug 9, 2011 10:33 AM

    Try the following resolution
    The error "Object Variable or With Block Variable Not Set" is caused when the FDM Service account does not have "Write" share permission to the FDMDATA folder structure, which resulted in the FDM Service account being unable to write the text file that is produced when running a SQL Integration Script. Without being able to write to the directory, the import process cannot complete successfully. Could you please verify the following and update the SR accordingly.
    1) From the FDM Login screen select "Add Application" from the drop down list
    2) Login with a valid user
    3) Highlight the application that is experiencing the issue and click "modify"
    4) Locate the "Application Path", this is the location of the FDM Application Files. Connect to the server hosting the FDMDATA folder.
    5) Right-click on the FDMDATA folder and choose "Properties"
    6) Click on the "Sharing" tab and click the "Permissions" button
    7) Click "Add" and enter the id of the FDM Service Account used for all the FDM Configs and click OK
    8) Check the "Full Control" box and click "Apply"
    9) Click OK to save the changes.

  • Error - Object variable or with block variable not set while running report

    Hi,
    I am trying to run BEx reports through portal.
    However I am not able to run any report. I am getting following error.
    "Run time error '91':
    Object variable or with block variable not set"
    This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
    Also I have authorization to those reports. So doesn't seem to be authorization issue.
    Please help me to resolve this problem.
    Thank you in advance.
    Regards,
    Deepti Jain.

    Hi Deepti,
    Can i knw how you solved this issue?
    Regards,
    Maili

  • Object variable or With block variable not set error message

    When processing the Rate application I get a "Object variable or With block variable not set error message" What is causing this error and how do I fix it?

    Hi Brian,
    I'm afraid that in some ways this reply won't be very helpful though it may help you save some time. 
    The error message you describe is a very generic one thrown by Microsoft .NET (the programming platform that SAP is written with, see the link at the bottom of this message) and not being 'handled' by SAP. 
    This means from a SAP perspective that any one of many unrelated things may be causing the error and that it gives you virtually no help in tracking the problem down in SAP.
    We've plagued by this message quite a bit, my advice is to look for clues at to what may be happening elsewhere, e.g. try:
    1. The windows event viewer, if you are in a multi-server environment then check the event log on all machines.
    2. The SQL Server event log (this can be found in Management Studio - Management - SQL Server Logs assuming you're using SQL Server 2005)
    3. IIS logs, usually these are text files in the following location -
    HTTP.SYS Error Log - %windir%\System32\LogFiles\HTTPERR
    IIS Website Log - %windir%\System32\LogFiles\W3SVC#
    It is dull work trawling through all these places looking for error events with a timestamp similar to the time your error was encountered, but by doing this we've been able to troubleshoot some issues that otherwise would have taken us ages to rectify via trial and error.
    Sorry that there is no definitive answer, but if itu2019s of any help there's many more of us out there who this error message causes trouble for.
    Regards,
    Iain
    Microsoft "Object variable or With block variable not set" error message link:
    http://support.microsoft.com/kb/316478

  • Drill Through - Object variable or With block variable not set.

    Hi
    I've set up all the relevant drillkeys, the table and the query but I'm getting a "Object variable or With block variable not set." in the browser page when it comes up
    The title looks fine in the page and takes on the correct description....help!
    Thanks very much in advance

    Hi,
    This frequently happens in a multi-server environment. It is a result of the encryption key between the two servers becoming corrupt.
    Go to Server manager on the app box.
    Delete the encryption key. (backup first if you like)
    Re-create the encryption key
    Register msolap90.dll on both servers
    I don't have the text for this handy. I think it's: regsvr32 "C:\xxx\xxx\xxxx\xxx\msolap90.dll"
    Note: you must use the quotes!
    Reboot the DB box
    Reboot the App box
    Hope this helps. Kindly award points if helpful.

  • BPC MS 7.5 - "Object Variable or With Block Variable Not Set"

    Our BPC Users login to BPC via Citrix. Some of our users keep on having issue with the above which we do not know what cause it. This will cause the BPC Menu Planning & Consolidation missing.  We know the workaround by going into Excel Option and to enable Add Ins again but that will not be a permanent solution. Any help please as this has been going on for few months.

    Hi Roberto, actually there is no pop up message coming from the excel. It just happen when the user try login, it pop up with that "object variable....." error
    HI Akim, our users don't have the option to choose 2nd option, all our users is default to 2nd option

Maybe you are looking for