Object Versions invalid after DB actions (table copy)
Hi all,
recently I have encountered some weird issues during a little archiving run I'm doing on MM_MATBEL.
Tables involved:
IMEXT
MKPF
MSEG
MSEGO1
MSEGO2
NAST
OIAQB
After the archiving was done I logically went for an online reorg of these tables. This worked for all tables, except for MSEG. The reason was the following:
BR1962W Table SAPSR3.MSEG has more than 255 columns
BR1967W Table SAPSR3.MSEG would be implicitly decompressed during reorganization
BR1111I Reorganization of table SAPSR3.MSEG will be skipped
So apparently the table had been compressed in the past (when it had less than 255 columns) and now cannot be rebuilt anymore with compression.
In the following note they mention a workaround/solution:
http://service.sap.com/sap/support/notes/1872983
The solution consists of copying the compressed table into a newly created table. After some problems with the script (which will be fixed) and consulting SAP Support I finally succeeded in rebuilding the tables.
After this rebuild there are numerous dumps (LOAD_FORMAT_ERROR, DDIC_TYPE_INCONSISTENCY, LOAD_TYPE_VERSION_MISMATCH, etc...) in SAP itself, rendering the system practically unusable.
One workaround is to manually re-activate the object generating the shortdump, this does solve the issue on that object, but that's it.
I can hear you think: "Run SGEN, you stupid". Well, I did, and it did not help, or at least not much. It did regenerate some objects, but apparently it's not sufficient.
To me it seems like some inconsistency in the Dictionary, caused by the tables that were rebuilt. Is there a way that we can regenerate the Data Dictionary of SAP? Or at least fix the DDL inconsistencies?
The tables that I have recreated using note 1872983 are:
LIPS
MSEG
VBAP
VBRP
ZEKPO
N2CA02
N2CA03
N2CA04
N2CA05
N2CA09
PA0008
PA0146
PA0701
PA0706
PA0764
PA0897
PB0008
T5ITT7
RSEUMOD
COMPMOVE
WDFR_POS
N3BGF1008
OIUH_RV_JE
OIUH_RV_RJE
TTONFTVZZBEPP
TLVC_DFT_ASSGN
If you have any suggestions, I'd love to hear them.
Thanks in advance
Dieter Waelkens
Ps:
I've found notes
http://service.sap.com/sap/support/notes/1567187
http://service.sap.com/sap/support/notes/162991
I'll analyze them and come back with an update
Message was edited by: Dieter Waelkens (added notes in the end)
Hello Dieter,
Looks like your errors are more related to DDIC problems than program problems, this might be why SGEN could not help.
Report RUTMSJOB could help, at least to identify if there are inconsistencies, that could be fixed by re-activating the tables.
Check note 1538932 - RUTMSJOB error with check DDTYPES
You could also use report RSNTABCONSISTENCY from note 1167784 - Runtime error DDIC_TYPE_INCONSISTENCY
Regards
Options for RUTMSJOB in expert mode.
Similar Messages
-
"Object is invalid" after three loops
This script is placing objects on pages (in reverse order, as it happens). It works correctly for three pages, then stops and gives me the following error:
Object is invalid
Line: 15
Source: img = doc.pages[pageNo].place(fileList[a]);
I have no clue why, so any help would be very appreciated.
var doc = app.activeDocument;
var totalPages = parseInt(app.activeWindow.activePage.name);
var inFolder = Folder.selectDialog("Please select folder to process");
if(inFolder != null){
var fileList = inFolder.getFiles(/\.(tif)$/i);
for(var a = 0 ;a < fileList.length; a++){
if(fileList[a] instanceof File){
var fileString = fileList[a].name.split("_",1);
var fileNo = parseInt(fileString);
var pageNo = totalPages - fileNo;
img = doc.pages[pageNo].place(fileList[a]);
imgFrame = img[0].parent;
var Bound = imgFrame.geometricBounds;
var h = Bound[2]-Bound[0];
var scalePercent = 7.75/h;
var imgMatrix = app.transformationMatrices.add();
imgMatrix = imgMatrix.scaleMatrix(scalePercent, scalePercent);
if(fileNo[0]%2 == 0){
imgFrame.transform(CoordinateSpaces.PASTEBOARD_COORDINATES,AnchorPoint.topRightAnchor,imgM atrix);
} else {
imgFrame.move(["-.125in", "-.125in"]);
imgFrame.transform(CoordinateSpaces.PASTEBOARD_COORDINATES,AnchorPoint.topLeftAnchor,imgMa trix);be carefull with var totalPages = parseInt(app.activeWindow.activePage.name);
the pagename can be (for ex.) "MXIV", if you use roman numbering.
use .documentOffset to be on the safe side. -
Hi All,
Is there any way to findout when(date / time) an object got invalid, as the LAST_DDL_TIME and TIMESTAMP columns of the DBA_OBJECTS do not change if the parent object gets affected and child become invalid right?Enfact I want to know at what time an object became INVALID,
there are 2 n more DBA's applying the Script for the Database, One is working on an assignment to remove the unwanted Objected from DB and the other is working on normal development , now both executed their script which invalidated around 200 Objects, I want to know Invalid objects by each action (Cleanup or Development action) As I am aware of the time the statements were executed, one way to get the list, is to revert the changes and work pro-activly, but it would be very easy for me if I group the list of objects invalidated by the time.otherwise I would have to get the list of all objects before and after every action activity, which is frequent
Thanks -
BI 7.6 Latest Trail version after RSA1 action MaxDB stopped
Hi,
BI 7.6 latest trail version i installed after RSA1 activation once system restarted my DISP+WORK.EXE got stopped, please tel me how to resolve when i see log stated below;
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2560] Thu Dec 27 22:17:56 2007
[Thr 2560] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2556
[Thr 2560] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2556) [msxxserv.c 1824]
[Thr 2560] MsInitAclInfo: acl file D:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2560] MsGetOwnIpAddr: my host addresses are :
[Thr 2560] 1 : [200.200.200.201] jagadesh (HOSTNAME)
[Thr 2560] 2 : [127.0.0.1] jagadesh (LOCALHOST)
[Thr 2560] 3 : [192.168.0.100] jagadesh.hsd1.nj.comcast.net. (NILIST)
[Thr 2560] MsHttpInit: full qualified hostname = jagadesh
[Thr 2560] HTTP logging is switch off
[Thr 2560] set HTTP state to LISTEN
[Thr 2560] ms/icf_info_server : deleted
[Thr 2560] *** I listen to port sapmsNSP (3600) ***
[Thr 2560] *** I listen to internal port 3900 (3900) ***
[Thr 2560] *** HTTP port 8100 state LISTEN ***
[Thr 2560] CUSTOMER KEY: >R1490247412<
[Thr 2560] Thu Dec 27 22:19:09 2007
[Thr 2560] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from jagadesh_NSP_00 [msxxserv.c 4679]
[Thr 2604] Thu Dec 27 22:19:14 2007
[Thr 2604] MsSExit: received SIGINT (2)
[Thr 2604] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2556) [msxxserv.c 5944]
++++++++++++++++++++++++++++++
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2564
Thu Dec 27 22:17:57 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2564) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 27 22:18:02 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F20040
DpShMCreate: allocated wp_adm at 04F21A28
DpShMCreate: allocated tm_adm_list at 04F232E0
DpShMCreate: allocated tm_adm at 04F23310
DpShMCreate: allocated wp_ca_adm at 052935A0
DpShMCreate: allocated appc_ca_adm at 05293A50
DpShMCreate: allocated comm_adm at 05293F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05314DB0
DpShMCreate: allocated gw_adm at 05314DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05314E20
DpShMCreate: allocated wall_adm at 05314E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >jagadesh_NSP_00 <)
DpStartStopMsg: start msg sent
Thu Dec 27 22:18:03 2007
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Thu Dec 27 22:18:42 2007
ERROR => W0 (pid 2640) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2648) died [dpxxdisp.c 14318]
ERROR => W2 (pid 2656) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 2664) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2672) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 2680) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 2688) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:52 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Dec 28 03:18:52 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2640 Ended no 1 0 0
1 DIA 2648 Ended no 1 0 0
2 DIA 2656 Ended no 1 0 0
3 UPD 2664 Ended no 1 0 0
4 ENQ 2672 Ended no 1 0 0
5 BTC 2680 Ended no 1 0 0
6 SPO 2688 Ended no 1 0 0
Dispatcher Queue Statistics Fri Dec 28 03:18:52 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Fri Dec 28 03:18:52 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Dec 28 03:18:52 2007
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:57 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2624) (SOFT_KILL)
Stop icman
killing process (2632) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2624 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2624 HANDLE:1636)
wait for end of icman
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2632 HANDLE:1644)
DpStartStopMsg: send stop message (myname is >jagadesh_NSP_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Dec 27 22:19:10 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2564) [dpxxdisp.c 10333]
Good Bye .....
+++++++++++++++++++++++++++++
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 27 22:18:03 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 2640
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2640) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04F20040
M DpShMCreate: allocated wp_adm at 04F21A28
M DpShMCreate: allocated tm_adm_list at 04F232E0
M DpShMCreate: allocated tm_adm at 04F23310
M DpShMCreate: allocated wp_ca_adm at 052935A0
M DpShMCreate: allocated appc_ca_adm at 05293A50
M DpShMCreate: allocated comm_adm at 05293F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05314DB0
M DpShMCreate: allocated gw_adm at 05314DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05314E20
M DpShMCreate: allocated wall_adm at 05314E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 27 22:18:04 2007
M ThInit: running on host jagadesh
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Thu Dec 27 22:18:05 2007
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server jagadesh_NSP_00 on host jagadesh (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 27 22:18:05 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2640) [dpnttool.c 327]
+++++++++++++++++++++++
Regards
JackHi,
BI 7.6 latest trail version i installed after RSA1 activation once system restarted my DISP+WORK.EXE got stopped, please tel me how to resolve when i see log stated below;
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 2560] Thu Dec 27 22:17:56 2007
[Thr 2560] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2556
[Thr 2560] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2556) [msxxserv.c 1824]
[Thr 2560] MsInitAclInfo: acl file D:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2560] MsGetOwnIpAddr: my host addresses are :
[Thr 2560] 1 : [200.200.200.201] jagadesh (HOSTNAME)
[Thr 2560] 2 : [127.0.0.1] jagadesh (LOCALHOST)
[Thr 2560] 3 : [192.168.0.100] jagadesh.hsd1.nj.comcast.net. (NILIST)
[Thr 2560] MsHttpInit: full qualified hostname = jagadesh
[Thr 2560] HTTP logging is switch off
[Thr 2560] set HTTP state to LISTEN
[Thr 2560] ms/icf_info_server : deleted
[Thr 2560] *** I listen to port sapmsNSP (3600) ***
[Thr 2560] *** I listen to internal port 3900 (3900) ***
[Thr 2560] *** HTTP port 8100 state LISTEN ***
[Thr 2560] CUSTOMER KEY: >R1490247412<
[Thr 2560] Thu Dec 27 22:19:09 2007
[Thr 2560] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from jagadesh_NSP_00 [msxxserv.c 4679]
[Thr 2604] Thu Dec 27 22:19:14 2007
[Thr 2604] MsSExit: received SIGINT (2)
[Thr 2604] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2556) [msxxserv.c 5944]
++++++++++++++++++++++++++++++
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 2564
Thu Dec 27 22:17:57 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2564) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Dec 27 22:18:02 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
DpShMCreate: allocated sys_adm at 04F20040
DpShMCreate: allocated wp_adm at 04F21A28
DpShMCreate: allocated tm_adm_list at 04F232E0
DpShMCreate: allocated tm_adm at 04F23310
DpShMCreate: allocated wp_ca_adm at 052935A0
DpShMCreate: allocated appc_ca_adm at 05293A50
DpShMCreate: allocated comm_adm at 05293F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05314DB0
DpShMCreate: allocated gw_adm at 05314DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05314E20
DpShMCreate: allocated wall_adm at 05314E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >jagadesh_NSP_00 <)
DpStartStopMsg: start msg sent
Thu Dec 27 22:18:03 2007
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Thu Dec 27 22:18:42 2007
ERROR => W0 (pid 2640) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2648) died [dpxxdisp.c 14318]
ERROR => W2 (pid 2656) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 2664) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2672) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 2680) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 2688) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:52 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Dec 28 03:18:52 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2640 Ended no 1 0 0
1 DIA 2648 Ended no 1 0 0
2 DIA 2656 Ended no 1 0 0
3 UPD 2664 Ended no 1 0 0
4 ENQ 2672 Ended no 1 0 0
5 BTC 2680 Ended no 1 0 0
6 SPO 2688 Ended no 1 0 0
Dispatcher Queue Statistics Fri Dec 28 03:18:52 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
4
4
2000
4
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 7, udp 7 (100%), shm 0 ( 0%)
since last update total 7, udp 7 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Fri Dec 28 03:18:52 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Dec 28 03:18:52 2007
=============================
Slots: 20, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:57 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_NSP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2624) (SOFT_KILL)
Stop icman
killing process (2632) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2624 HANDLE:1636)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2624 HANDLE:1636)
wait for end of icman
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:18:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2632 HANDLE:1644)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1665
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Dec 27 22:19:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2632 HANDLE:1644)
DpStartStopMsg: send stop message (myname is >jagadesh_NSP_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Dec 27 22:19:10 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1600 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1600 (pos=2)
SiSelNRemove: removed sock 1600
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/7
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1600
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2564) [dpxxdisp.c 10333]
Good Bye .....
+++++++++++++++++++++++++++++
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Dec 27 22:18:03 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
B Library 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' loaded
B Version of 'D:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' is "700.08", patchlevel (0.95)
B New connection 0 created
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 2640
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2640) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04F20040, size: 4205552)
M DpShMCreate: allocated sys_adm at 04F20040
M DpShMCreate: allocated wp_adm at 04F21A28
M DpShMCreate: allocated tm_adm_list at 04F232E0
M DpShMCreate: allocated tm_adm at 04F23310
M DpShMCreate: allocated wp_ca_adm at 052935A0
M DpShMCreate: allocated appc_ca_adm at 05293A50
M DpShMCreate: allocated comm_adm at 05293F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 05314DB0
M DpShMCreate: allocated gw_adm at 05314DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05314E20
M DpShMCreate: allocated wall_adm at 05314E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Dec 27 22:18:04 2007
M ThInit: running on host jagadesh
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Thu Dec 27 22:18:05 2007
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server jagadesh_NSP_00 on host jagadesh (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Dec 27 22:18:05 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2640) [dpnttool.c 327]
+++++++++++++++++++++++
Regards
Jack -
Error: TSV_TNEW_PAGE_ALLOC_FAILED after SCCL Tables copied before 19785 of
SAP 4.6 C
Windows 2003 R2 SP2, MS SQL 2005 SP2 (64 bits)
RAM 8GB
Hi,
We made a homegeous copy (detach/attach) from PRD to QAS everything ok
The problem is when we use sccl to copy a client (500) to 400 the following message appear (st22).
TSV_TNEW_PAGE_ALLOC_FAILED
No storage space available for extending table "IT_17".
The internal table "IT_17" could not be enlarged further.
To extend the internal table, 15992 bytes of storage space was
needed, but none was available. At this point, the table "IT_17" has
166826 entries.
I have changed parameters:
ztta/roll_area = 8000512
ztta/roll_extension = 2000000000
abap/heap_area_dia = 2100297728
abap/heap_area_nondia = 2100297728
abap/heap_area_total = 2097152000
em/initial_size_MB = 8191
Same problem, after that I changed the following param:
rdisp/PG_SHM = 120000
rdisp/ROLL_MAXFS = 120000
rdisp/ROLL_SHM = 120000
The internal table "IT_17" could not be enlarged further.
To extend the internal table, 15992 bytes of storage space was
needed, but none was available. At this point, the table "IT_17" has
147818 entries.
Numbetr entries of the the table "IT_17" reduce from 166826 to 147818
Tabled copied are 19.785 from 19.811
Is it normal ? maybe I am wrong with something...
TIAHi,
The swap has 20 Gb, the problem was
Note 601196 - Client copy: Problems with report RCTXTCPY
Symptom
Within a client copy, long runtimes or terminations occur with report RCTXTCPY.
Solution
Completely replace the source code of report RCTXTCPY by the version specified in the attachment.
or apply patch: SAP_APPL 46C SAPKH46C44
Guess.. we have SAPKH46C43
So we changed program and it works perfect
Thak you -
Refreshing Entity Objects after Altering the table
Hi,
My Entity Object is based on a table... and View Objects on the Entity Objects. Now if I alter the table (just changing the width of the column), that change is not visible on the Entity Object. Is there any way I can automatically refresh the Entity Objects after altering the table(only column width is changed).
(Changes made to Entity Objects manually are reflected in the View Object correctly.)
Regards
Faiyaz'changing the width of the column' means changing the size of the column in the table description in the database. For e.g.. In the original table I had a column OIL_KEY NUMBER(6). Now I change the column to be of size 12 i.e. OIL_KEY NUMBER(12). This does not get refreshed in the Entity Object.
-
When try to call Sub in Excel Objects > SheetXX after the original xlsm is modified and saved by another user in diff machine, getting an error below and seems Excel cannot identify any subs exists in Sheet.
Compile error:
Object library invalid or contains references to object definitions that could not be found
Note: it seems that this problem has been occurring After December 2014 update and still exists even after applying the fix:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/11/forms-controls-stop-working-after-december-2014-updates-.aspx)Hi Kwlee324,
Thanks for sharing the workaround with us. It would be very helpful for others who have the same issue.
Also I found a two useful links about the error message "Object library invalid or contains references to object definitions that could not be found":
https://support.microsoft.com/kb/2703186
http://blogs.msdn.com/b/vsod/archive/2009/06/05/visual-basic-6-controls-stop-working-after-security-advisory-960715.aspx
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE
Hello ,
Could not able to Roll up the request in the cube. When i am clicking the Roll up Tab its getting short dump .
So while doing RSRV checks for the particular Cube getting below errors -
"Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE"
Due to this data is not available for reporting. Can anyone help to resolve this issue.
thanks.Hello ,
Could not able to Roll up the request in the cube. When i am clicking the Roll up Tab its getting short dump .
So while doing RSRV checks for the particular Cube getting below errors -
"Entry for InfoCube/DataStore object *** is invalid in table RSMDATASTATE"
Due to this data is not available for reporting. Can anyone help to resolve this issue.
thanks. -
Switch On versioning after the decision table is created
Hi All,
I have created a custom application and created some decision tables etc in it. While creating and activating the application, i did not switch on the versioning and hence all the decision tables i created did not have the version switched on and also the switch is not editable. Now we have realised that we need versions to be created for these decision tables when ever there is a change in the content. I have turned on the versioning at the application level, but still the versioning option at the Decision Table is not editable. Can you please suggest on how i can change the versioning option on the Decision Tables now.
Thanks & Best Regards,
KiranOn application level you can set the default for objects. You may have to manually switch the versioning on for your objects. In NW >= 7.03 you can use the mass change tool. Further the default can be set to enforced which will not let you change and activate an object unless versioning is switched on.
Anyway, I highly recommend to use the mode to version on transport and/or deployment (also on application level). This will make sure the current version is frozen whenever there is a transport or a deployment (with NW DSM only).
Do you have this feature or are you on an older version? -
Dp lib version mismatch-After kernel upgrade
Hi All,
After kernel upgrade from 700 162 to 179 all the workprocess are not coming up i am getting the below error:
Full qualified hostname = XXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 00:33:37 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
XXXXXXXXX:ts2adm 30% pg sapcpe.log
================ >>> main =======================
INFO: sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#18 $ SAP
=================================================
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/TS2/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
=================================================
Update Local Programs (dir-sync + file-path + ln)
=================================================
Starting at 2008/10/20 00:33:34
ERROR: can't change to central Executable-Dir /usr/sap/TS2/SYS/exe/ctrun (No such file or directory) [sapxxcpe.c:1488]
Mon Oct 20 00:50:19 2008
ERROR => gateway (pid 24413) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
please help in solving this problem
Thanks
Giridhar
Edited by: giridhar n on Oct 20, 2008 12:47 PMHi,
We faced an issue with workprocesses which are not coming up after the kernel(700) upgrade from patch 162 to 179. below are the error logs:
Error Log
(XXXXXXXXX is the hostname)
Dev_W1:
XXXXXXXXX:ts2adm 9% more dev_w1.old
trc file: "dev_w1", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 01
M sid TS2
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 162
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 3867
M
M
M Mon Oct 20 03:59:26 2008
M kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 1 1 3867) [thxxhead.c 1281]
M ThInit: running on host XXXXXXXXX
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C
C Mon Oct 20 03:59:27 2008
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPTS2's password
C Connecting as /-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Attaching to DB Server TS2 (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598)
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now '/-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Got SAPTS2's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106f02248,usrhp=0x106ef2398)
C Now I'm disconnected from ORACLE
C Connecting as SAPTS2/<pwd>-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now 'SAPTS2/<pwd>-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance TS2 is running on XXXXXXXXX with ORACLE version 10.2.0.2.0 since OCT 20, 2008, 03:49:47
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081020 035926 XXXXXXXXX
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
.sar,.gif
I
I Mon Oct 20 03:59:30 2008
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff64c00000, size: 20000768)
M SHM_ROLL_AREA (addr: 0xfffffffe40000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0xfffffffe36000000, size: 134217728)
M SHM_ROLL_ADM (addr: 0xffffffff7597a000, size: 3715586)
M SHM_PAGING_ADM (addr: 0xffffffff79a00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe2c004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7a900000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 1 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0xfffffffe2c092088, size: 576)
B dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe2c0922c8, size: 798968)
B dbntab: Buffer FTAB(item array) (addr: 0xfffffffe2c1553c0, size: 3195648)
B dbntab: Buffer FTAB(data area) (addr: 0xfffffffe2c4616c0, size: 30740480)
B dbntab: Buffer IREC(hash header) (addr: 0xfffffffe2e1b6088, size: 576)
B dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe2e1b62c8, size: 798968)
B dbntab: Buffer IREC(item array) (addr: 0xfffffffe2e2793c0, size: 798912)
B dbntab: Buffer IREC(data area) (addr: 0xfffffffe2e33c480, size: 6148096)
B dbntab: Buffer STAB(hash header) (addr: 0xfffffffe2e91c088, size: 576)
B dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe2e91c2c8, size: 798968)
B dbntab: Buffer STAB(item array) (addr: 0xfffffffe2e9df3c0, size: 798912)
B dbntab: Buffer STAB(data area) (addr: 0xfffffffe2eaa2480, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0xfffffffe2ed94088, size: 3072)
B dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe2ed94c88, size: 798968)
B dbntab: Buffer TTAB(item array) (addr: 0xfffffffe2ee57d80, size: 1997280)
B dbntab: Buffer TTAB(data area) (addr: 0xfffffffe2f03f760, size: 14580144)
B db_con_shm_ini: WP_ID = 1, WP_CNT = 24, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 0xfffffffe28012008)
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe24000100, size: 60000256, end: 0xfffffffe27938900)
B dbtbxbuf: Buffer TABLP (addr: 0xfffffffe20000100, size: 40960000, end: 0xfffffffe22710100)
B dbexpbuf: Buffer EIBUF (addr: 0xffffffff5d800108, size: 4194304, end: 0xffffffff5dc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe2fe30108, size: 5120000, end: 0xfffffffe30312108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe59800108, size: 4194304, end: 0xfffffffe59c00108)
B dbcalbuf: Buffer CALE (addr: 0xffffffff75d08000, size: 500000, end: 0xffffffff75d82120)
I *** ERROR => ShmProtect(62,3) shmat(268435641,0x0xfffffffe5a000000,(SHM_RND | 0)) (22: Invalid argument) [shmux.c 2782]
I *** ERROR => ShmCreate: ShmProtect( 62, 3) failed [shmux.c 1359]
I *** ERROR => ShmCreate( ATTACH 62, 86228824) failed 1 [mpixx.c 855]
M *** ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 5064]
M in_ThErrHandle: 1
M *** ERROR => ThInit: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10506]
M
M Info for wp 1
M
M pid = 3867
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Saving TBX statistics:
B dbtbxbuf: 0 object entries written.
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3867) [dpuxtool.c 269]
dev_icm:
trc file: "dev_icm", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 177
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3865
[Thr 1] started security log to file dev_icm_sec
[Thr 1] ICM running on: XXXXXXXXX.saipc.XXX.com
[Thr 1] MtxInit: 30001 0 2
[Thr 1] IcmInit: listening to admin port: 64999
[Thr 1] ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2_mt 681]
[Thr 1]
[Thr 1] * LOCATION ICM runing on host XXXXXXXXX
[Thr 1] * ERROR dp lib version mismatch, please check installation
[Thr 1] *
TIME Mon Oct 20 03:59:28 2008
[Thr 1] * RELEASE 700
[Thr 1] * COMPONENT DP
[Thr 1] * VERSION 241000
[Thr 1] * RC -9999
[Thr 1] * MODULE dpxxtool2_mt.c
[Thr 1] * LINE 688
[Thr 1] * DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
[Thr 1] * COUNTER 3
[Thr 1] *
[Thr 1] *****************************************************************************
[Thr 1] *** ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2_mt 369]
[Thr 1] *** ERROR => IcmInit: IcmIPCInit failed (rc=-9999) [icxxman_mt.c 1741]
[Thr 1] *** ICM shutdown completed (pid: 3865) ***
dev_ms:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Mon Oct 20 03:59:24 2008
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 145
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3853
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3853) [msxxserv_mt. 1834]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/TS2/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] 3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
[Thr 1] 4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = XXXXXXXXX.saipc.XXX.com
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = saipc.XXX.com
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsTS2 (3601) ***
[Thr 1] *** I listen to internal port 3901 (3901) ***
[Thr 1] CUSTOMER KEY: >C0395101982<
[Thr 1] Mon Oct 20 04:01:28 2008
[Thr 1] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from XXXXXXXXX_TS2_01 [msxxserv_mt. 4687]
[Thr 1] Mon Oct 20 04:05:07 2008
[Thr 1] MsSExit: received SIGINT (2)
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3853) [msxxserv_mt. 5998]
dev_rd:
trc file: "dev_rd", trc level: 1, release: "700"
Mon Oct 20 03:59:26 2008
***LOG S00=> GwInitReader, gateway started ( 3864) [gwxxrd.c 1757]
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 176
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3864
gateway runs with dp version 241000(ext=110000) (-(#) DPLIB-INT-VERSION-241000-UC)
gateway (version=700.2008.06.23)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Oct 20 03:59:27 2008
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
Full qualified hostname = XXXXXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 03:59:27 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
dev_rfc24:
Trace file opened at 20081020 031506 EDT SAP-REL 700,0,162 RFC-VER U 3 985555
======> User is locked. Please notify the person responsible
ABAP Programm: SAPLTMSC (Transaction: )
Called function module: TMS_CI_START_SERVICE
User: DDIC (Client: 015)
Destination: TMSADM-TS2.DOMAIN_DV2 (handle: 2, 11671309, {48FC3006-2FF4-60E5-E100-0000945C1F31})
dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 162
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3854
Mon Oct 20 03:59:25 2008
kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3854) [dpxxdisp.c 1257]
shared lib "dw_xml.so" version 162 successfully loaded
shared lib "dw_xtc.so" version 162 successfully loaded
shared lib "dw_stl.so" version 162 successfully loaded
shared lib "dw_gui.so" version 162 successfully loaded
shared lib "dw_mdm.so" version 162 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >XXXXXXXXX_TS2_01 <
DpShMCreate: sizeof(wp_adm) 42240 (1760)
DpShMCreate: sizeof(tm_adm) 150350080 (30064)
DpShMCreate: sizeof(wp_ca_adm) 31232 (104)
DpShMCreate: sizeof(appc_ca_adm) 208000 (104)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2080)
DpShMCreate: sizeof(wall_adm) (1000056/862328/88/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff66000000, size: 153051096)
DpShMCreate: allocated sys_adm at 0xffffffff66000000
DpShMCreate: allocated wp_adm at 0xffffffff66002218
DpShMCreate: allocated tm_adm_list at 0xffffffff6600c718
DpShMCreate: allocated tm_adm at 0xffffffff6600c778
DpShMCreate: allocated wp_ca_adm at 0xffffffff6ef6f078
DpShMCreate: allocated appc_ca_adm at 0xffffffff6ef76a78
DpShMCreate: allocated comm_adm at 0xffffffff6efa96f8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0xffffffff6f02f3d8
DpShMCreate: allocated gw_adm at 0xffffffff6f02f458
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff6f02f488
DpShMCreate: allocated wall_adm at 0xffffffff6f02f490
Mon Oct 20 03:59:26 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4048 MB allocated
<ES> 4047 blocks reserved for free list.
ES initialized.
Mon Oct 20 03:59:31 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1659]
***LOG Q0K=> DpMsAttach, mscon ( XXXXXXXXX) [dpxxdisp.c 12153]
DpStartStopMsg: send start message (myname is >XXXXXXXXX_TS2_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
ERROR => DpWPCheck: W0 (pid 3866) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3866) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => DpWPCheck: W1 (pid 3867) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3867) exited with exit code 255
ERROR => DpWPCheck: W2 (pid 3868) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3868) exited with exit code 255
ERROR => DpWPCheck: W4 (pid 3870) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3870) exited with exit code 255
ERROR => DpWPCheck: W5 (pid 3871) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3871) exited with exit code 255
ERROR => DpWPCheck: W6 (pid 3872) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3872) exited with exit code 255
ERROR => DpWPCheck: W7 (pid 3873) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3873) exited with exit code 255
ERROR => DpWPCheck: W8 (pid 3874) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3874) exited with exit code 255
ERROR => DpWPCheck: W9 (pid 3875) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3875) exited with exit code 255
ERROR => DpWPCheck: W10 (pid 3885) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3885) exited with exit code 255
ERROR => DpWPCheck: W11 (pid 3888) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3888) exited with exit code 255
ERROR => DpWPCheck: W12 (pid 3890) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3890) exited with exit code 255
ERROR => DpWPCheck: W13 (pid 3902) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3902) exited with exit code 255
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 162
Release check o.K.
Mon Oct 20 03:59:51 2008
my types changed after wp death/restart 0xbd --> 0x81
ERROR => DpWPCheck: W14 (pid 3903) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3903) exited with exit code 255
ERROR => DpWPCheck: W15 (pid 3904) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3904) exited with exit code 255
ERROR => DpWPCheck: W16 (pid 3905) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3905) exited with exit code 255
ERROR => DpWPCheck: W17 (pid 3908) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3908) exited with exit code 255
ERROR => DpWPCheck: W18 (pid 3911) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3911) exited with exit code 255
ERROR => DpWPCheck: W19 (pid 3914) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3914) exited with exit code 255
ERROR => DpWPCheck: W20 (pid 3915) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3915) exited with exit code 255
ERROR => DpWPCheck: W21 (pid 3916) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3916) exited with exit code 255
ERROR => DpWPCheck: W22 (pid 3919) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3919) exited with exit code 255
ERROR => DpWPCheck: W23 (pid 3924) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3924) exited with exit code 255
Mon Oct 20 04:00:11 2008
ERROR => gateway (pid 3864) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
kill(3869,0) successful -> process alive
killing W3-3869 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Oct 20 08:00:21 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3866 Ended no 3 0 0
1 DIA 3867 Ended no 3 0 0
2 DIA 3868 Ended no 3 0 0
3 DIA 3869 Run yes 0 0 0
4 DIA 3870 Ended no 3 0 0
5 DIA 3871 Ended no 3 0 0
6 DIA 3872 Ended no 3 0 0
7 DIA 3873 Ended no 3 0 0
8 DIA 3874 Ended no 3 0 0
9 DIA 3875 Ended no 3 0 0
10 UPD 3885 Ended no 3 0 0
11 UPD 3888 Ended no 3 0 0
12 UPD 3890 Ended no 3 0 0
13 UPD 3902 Ended no 3 0 0
14 ENQ 3903 Ended no 2 0 0
15 BTC 3904 Ended no 2 0 0
16 BTC 3905 Ended no 2 0 0
17 BTC 3908 Ended no 2 0 0
18 BTC 3911 Ended no 2 0 0
19 BTC 3914 Ended no 2 0 0
20 BTC 3915 Ended no 2 0 0
21 SPO 3916 Ended no 2 0 0
22 UP2 3919 Ended no 2 0 0
23 UP2 3924 Ended no 2 0 0
Dispatcher Queue Statistics Mon Oct 20 08:00:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
4000
0
0
--------++++--
+
DIA
4
4
4000
4
0
--------++++--
+
UPD
0
0
4000
0
0
--------++++--
+
ENQ
0
0
4000
0
0
--------++++--
+
BTC
0
0
4000
0
0
--------++++--
+
SPO
0
0
4000
0
0
--------++++--
+
UP2
0
0
4000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 2 ( 66%), shm 1 ( 33%)
since last update total 3, udp 2 ( 66%), shm 1 ( 33%)
Dump of tm_adm structure: Mon Oct 20 08:00:21 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Oct 20 08:00:21 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >XXXXXXXXX_TS2_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
please help me to solve this.
Thanks
Giridhar -
i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*" VALUE(POHD) TYPE ZPOHD OPTIONAL
*" VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*" RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
ls_pohdx TYPE bapimepoheaderx,
lt_poit TYPE TABLE OF bapimepoitem,
lt_poitx TYPE TABLE OF bapimepoitemx,
ls_poit TYPE bapimepoitem,
ls_poitx TYPE bapimepoitemx.
MOVE-CORRESPONDING pohd to ls_pohd.
MOVE-CORRESPONDING poitem to ls_poit.
ls_pohdx-comp_code = 'x'.
ls_pohdx-doc_type = 'x'.
ls_pohdx-vendor = 'x'.
ls_pohdx-purch_org = 'x'.
ls_pohdx-pur_group = 'x'.
ls_poit-po_item = '00010'.
APPEND ls_poit to lt_poit.
ls_poitx-po_item = '00010'.
ls_poitx-po_itemx = 'x'.
ls_poitx-material = 'x'.
ls_poitx-plant = 'x'.
ls_poitx-quantity = 'x'.
APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
POHEADER = ls_pohd
POHEADERX = ls_pohdx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* PARK_COMPLETE =
* PARK_UNCOMPLETE =
* IMPORTING
* EXPPURCHASEORDER =
* EXPHEADER =
* EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = lt_poit
POITEMX = lt_poitx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
* POCOMPONENTS =
* POCOMPONENTSX =
* POSHIPPING =
* POSHIPPINGX =
* POSHIPPINGEXP =
* SERIALNUMBER =
* SERIALNUMBERX =
* INVPLANHEADER =
* INVPLANHEADERX =
* INVPLANITEM =
* INVPLANITEMX =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". -
Time_building_block_id and object version number
Hello,
could someone help me out with an explanation how the time_building_block_id and object version number to be interpreted?
Are these independent? What actions create new ID and new ovn?
My first idea was that one ID can have different instances in the table with different object version numbers. However I found cases belonging to the same parent buildingblock where both the id and ovn are different.
So based on this only one of the columns could be primary.
However for the joins both are used typically at the same time, suggesting that the two together constitutes a primary key.
Are the DETAIL level records belonding to the same DAY level record to be treated as co-existing entries and their measure to be summarized? Or only the latest (bigger ovn?) to be considered, so it is an updated version of the record with the previous ovn?
thanks!The version number in the TC Building blocks is used to identify changes to timecard building blocks. It is not the same as an object version number on a record in a table.
OTL keeps an audit history of all changes to the timecard, at whatever level they occur. It uses this in retropay processes to identify the 'true' hours to use.
TC Building blocks have a 'scope', for example there are building blocks at these levels:
Timecard
Period / Application
Day
Detail
If you entered 8 hours on a new timecard for Monday 07/09/09 it would create a building block record for that date and call it version 1.
If you later make a change to that DAY, OTL will create a new record with version 2. Say this one shows 7 hours.
OTL can then interpret this as -8 + 7 = -1 and make the appropriate adjustment.
Hope that helps explain it!
Regards
Tim -
Object library invalid or contains references to object definitions that could not be found problem
Hello,
Yesterday I got the following error on the server: "object library invalid or contains references to object definitions that could not be found problem".
I found this documentation, followed the steps and all was OK on the server:
http://support.microsoft.com/kb/2703186/en-us
https://social.msdn.microsoft.com/Forums/office/en-US/e94f2fc3-71f1-4dad-bbf1-37f906e28e8e/object-library-invalid-or-contains-references-to-object-definitions-that-could-not-be-found?forum=exceldev
Our server is used to do batch processing for refreshing our excel's. This morning, after the excel's got refreshed on the server, I've got this error on the
client computers (everything works fine on the server computer). I did the steps above on the client computers, but the problem still persists.
It looks like there is a difference in version between server and client.
If I do the refreshing on the same computer there is no problem. But when the server does the refreshing and I try to open it on a different computer, I get this error.
The security update has been removed from the computer, but I can't use my excel's anymore.
Does any one have some advice for me?
Best regards,
WouterHi Wouter,
Thanks for the further explaintation.
According to the description, the issue seems that the Workboook on the client side(with lower Excel version) couldn't run the VBA after it opened by server(higher version Excel application).
If I understood correctly, that sounds that the issue is relative to the specific version of Excel product or the updates.
I suggest you contacting Microsoft support to raise an incident so that our engineer could work closely with him to identify the root cause and resolve this issue as soon as possible.
If the support engineer determines that the issue is the result of a bug the service request will be a no-charge case and you won't be charged.
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Javascript Error! Error number: 45 error string: Objects is invalid line: 387, Line 428
I am running Indesign CS3 on an XP computer. I installed a plugin for barcodes from teacup Software, Barcodemaker for Indesign CS3 win and this has crashed my Indesign CS3.
Everytime I startup I get this Javascript error! Error number: 45 Error string: objects is invalid line: 387 I hit enter and iget the same message line: 428.
The adobe knowledge base has a message http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402389&sliceId=2
I can't find the file Pluginconfig.txt on my computer to delte as suggested in this article. Can anyone help with this issue.
I have uninstalled the plugin and I have try to repair/reinstall my copy of Indesigh CS3 version 5.0.4 but it still is not possible to use Indesign.
Has anyone encoutered this problem? Can you tell me where to find this file Pluginconfig.txt.C:\Documents and Settings\[username]\Local Settings\Application Data\Adobe\InDesign\Version 5.0\Caches\InDesign Recovery
This is a hidden folder, so you'll need to set Explorer to show hidden files if you haven't already. Start by just renaming the folder to _InDesign Recovery and it should rebuild on the next launch if this is going to work. If it doesn't work, you won't have lost anything.
Might work even better if you were to try a system restore, however. Do you have a restore point from before the plugin was installed?
Peter -
Hi all,
i have copied a few existing tables and used it in my program.after activating my tables(tables that are copied)
i ve sent it for transport from development to quality.but my basis consultant replied me with RC = 8.
and in the report output it showed like this.
Activate table YQM_TBL_TC_REF
/ | Key field TCNO has unpermitted type |
/ | Field TCNO: Component type or domain used not active or does not exist |
Field TCNO cannot be used as key field because no default exists for type
/ | Nametab for table YQM_TBL_TC_REF cannot be generated |
Table YQM_TBL_TC_REF was not activated
Activate table YWBG
/ | Field EXCESSM: Component type or domain used not active or does not exist |
/ | Field MOIST: Component type or domain used not active or does not exist |
/ | Nametab for table YWBG cannot be generated |
| Table YWBG was not activated
but i have activated all the tables and even adjust and activated.i have to transport these tables along with the program. any help in resolving wud be greatfull.
Thanks,
narenHi Naren,
First activate all the Data Elements, Domain in the Package. Then activate all the structures and then finally the Database Tables. It so happens that sometime during Generation, some problem happens and this doesn't gets generated properly. And hence inactive Objects are locked in a Transport Request. And when it reaches the Q system, the dependent transport fails.
So, I would suggest you to regenerate all the Objects. And then check for any generation related errors. Then lock them in a new transport and release the request. I hope this will solve the problem.
Have a look at the Runtime Object of the DDIC Tables. The way to navigate is SE11 --> Open the DDIC Table --> Utilities --> Runtime --> Check. This will tell you the status of all the Runtime Object.
Hope this helps.
Thanks,
Samantak.
Maybe you are looking for
-
Why won't the raw files from my new Nikon D810 open in ACR?
I just shot a newborn session on my brand new Nikon D810 and my RAW files will not open in ACR or CC or PSE. Everything is up to date. This is my first time using the new camera and the photos are for a paying client. Am I screwed until the new ACR u
-
Installer exits at start of installation
Sir, I am installing on computer with following conf. OS: Windows 2000 Pro , Service Pack 3 Norton Internet Security Processor:P4 RAM:1GB Pagefile:2GB When i starts the installation it ask for path , i specify it and choose Enterprise Edition option,
-
Doubt on Text Variable in report
Hi All, Currently i am working on Bex Reporting. I have created the text variable of type replacement Path and reference charactistic is 0FISPER. I have made all the settings in report level. While running the report, the description is displaying as
-
Hello I would like to know if it is possible to convert received OTF files to PDF with SAP NetWeawer? I have received som OTF files, which I need printet - so therefore I would like to convert them to some printformat that my own printer accepts! If
-
Downloads different file type.
I'm downloading Word documents, from email for example, and they are being saved to hard drive as application files. Jeopardy files to be exact, a program I have for Classroom Jeopardy. Help????