OBJECTIVE SETTING

Hi all,
We have implemented Objective Setting and we find the following problem : When we want to enter the objective of an apraisee in the template via web, the number of characters we can enter in the objective setting box is limited to something like 40 although the box is bigger.
Does any body know where can we change this (via one of the body, directly in the BSP)?. Thanks everybody in advance.

Hi,
The criteria and criteria groups are element types VC and VB in the appraisal template (can be accessed through PHAP_CATALOG).
The description to criterias and criteria groups can be given in the template itself.
For this Goto PHAP_CATALOG-> double click on a criterias or criteria group
and then goto 'decsription' tab and give the description.
Or you can do the same in BSP provided you have made config in template to the column 'Objectives' and the corresponding criteria. Select Note under the column 'Note' for 'Objectives'.
Hope this helps you.
Regards,
Subbu.

Similar Messages

  • Error while saving for Objective setting

    Hi,
    While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
    <u>Error documentation is as follows</u>
    <b>Diagnosis</b>
    Entries in table HRPAD605 cannot be edited in connection with customizing object PDST      T as table HRPAD605 does not belong to customizing object PDST      T, according to the object definition.
    <b>System Response</b>
    The function terminates.
    <b>Procedure</b>
    Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
    Correct the object definition or the entry for the Transport Organizer interface.
    Thanks

    Hello,
    Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
    Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
    The report RHSOBJCH corrects the missing HR entries in the OBJS table.
    This step you need to perform only once. For OSA you need to overtake
    *5020 up to *5026, also PAD605,606 and 607 references.
    When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
    Hope this helps,
    Regards and Groetjes,
    Maurice

  • How do I check Business object set type for a particular field

    Hi,
    I have a requirement to make the  DESCRIPTION field editable  for Internal Goods and Service .I have done it for Limit shopping cart with following details in the below configuration
    Goto SPRO->SAP Supplier Relation ship Management
                             ->SRM Server
                                 ->Coss applications and settings -> Extensions and Field Control
                                          ->Configure field control->configure control for fields substructure (in tabs field)
    Bus. Object Set Type  32  
    Structure Field Name   DESCRIPTION
    Bus. Object Type        BUS2121
    Set Level                    ITEM    
    field editable               checked
    But for  Internal Goods and Service which Bus. Object Set Type should i use to achive this
    Thanks
    Vivek

    Hello Vivek,
    Execute transaction SM30 and display the Table/View /SAPSRM/V_ACTSET. Here you will find set type of all the fields.
    Regards,
    Arun Singh

  • Objective Setting and Appraisals in Portal

    Good Morning,
    I have that implement the component Objective Setting and Appraisals in the portal.
    I want know that report standard can display in the portal for this component and the functionality standard of this module in the portal for the employee and Manager in the portal not in ECC.
    Kind Regards,
    Sanew2

    Thank You Lincoln Gupta  for you response,
    If i want a report for the manager, i have that request for a consultant of BI?
    Kind regards,
    sanew2

  • Update Objective Setting & Appraisals(Received) tab in PA20

    Hi all,
    I am currently working on OSA appraisal. I managed to create appraisal. How can i update the Objective Setting & Appraisals(Received) and  Objective Setting & Appraisals(Created) tab in PA20, infotype 25 ?
    Appreciate your all help.
    Thank you.

    Hi Binu,
    I am not entirely clear about your requirement, but in OOHAP_VALUE_TYPE, for a specific proficiency value, if you have maintained a description for the value under 'Value description' then it will be displayed on the form within the 'Info' button.
    Regards,
    Priya.

  • Objective Setting and Appraisals: No BSP-Template found!

    I am implementing MSS and am getting an error under tab Employee Review for Objective Setting and Appraisals.  The error is:
    An error occurred: java.lang.Exception: Error in CFViewgroup.createListModel: No BSP-Template found!
    Any clues as to how to fix this?

    Now its been a while since ive seen that error .... id check the following:
    1. User Parameters in the backend HR system
    2. User Permissions in the backend HR system (although I dont think its related)
    3. In Security Zones - ensure that the com.sap.portal.ep50 node has sufficient privs for your user.
    BTW which versions of EP and HR are you using - that may have some bearing - ive only ever seen it on ECC5 and EP6.0 ...
    Haydn

  • Transport an Appraisal and Objective Setting Template

    Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
    Scenario:
    You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
    However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
    You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
    Cause & Resolution:
    The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
    Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
    If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
    Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
    If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
    Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
    Happy transporting...
    Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
    Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM

    >
    A. Jimenez wrote:
    > Hi Francois,
    >
    > I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
    >
    > You or anyone know how to transport this customization?
    >
    > Thanks in advance
    Hi Abe,
    what is the appraisal process you are talking about?  The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document?  if so SAP does not have a great straightforward solution, but they did provide us some options.
    you can check out this thread and if you want I can send you the full document that is referred to in the post. 
    EP4: Performance Management-Flexible-Transporting the Tab & Process config

  • Is it possible to configure Team calibration for Objective Setting Appraisals in EHP7

    Hi Friends,
    We are on EHP7. We have implemented objective setting appraisal for our client.
    We have created an appraisal template under category group "Personnel appraisals". We have configured the VA, VB, VC, Column ids.  Status tab flow is used from In preparation - Completed.
    The enhancements are used to accommodate customer specific calculations for the scores based on the final ratings.
    An additional requirement from the client is; once the appraisal process is over for a team; the team manager should be able to see the scores of his direct reportees in the MSS.
    1) He should be given a provision to modify the final rating score; incase if he finds that one of the team members deserve a better score in line with the comparison of other team members. He should be able to call the template and be able to revise the final ratings from his MSS directly.
    2) When he modifies the final ratings by calling the appraisal template on the MSS; that new score should be stored in the appraisal template (database tables); that is; this should overwrite the final scores which was initially calculated during the final appraisal discussion between the apprasier and appraisee. This new values should be taken for all reporting or new compensation revision process.
    Should this requirement be addressed by Assessment of Employees and Calibration Process for Employee Assessments standard configurations?
    If that is the option; I have already done these settings for flexible performance appraisal.
    But in the MSS > under Talent Management > Assessment
    We are getting a blank screen in the "In process & Completed " tabs. No employee is listed.
    The calibration grid is empty. But under under talent profile; we are able to see the names of the team members.
    Is there any other method available for this purpose ?
    Request your comments on options to deliver this functionality.
    Thanks.
    ER.

    Hi Srujan,
    For every paying company code you can have multiple sending company codes.
    You can make this configuration in FBZP > Paying company codes tab.
    Once in 'Paying company codes', here click on 'Company codes' button on top right.
    This means you will need all the FBZP setup for your paying company code only.
    Also, please refer to below link to configure cross company settings
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?QuickLink=index&overridelayout=true
    Also, this document will be useful:
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/FIBP/FIBP.pdf
    Cheers,
    Zubin

  • Objective Setting and Appraisals not appear in SPRO -- IMG

    Hello Experts,
    I need to activate "Objective Setting and Appraisals"
    its missing or not appear from SPRO --> Personal Management --> Personal Development -->Objective Setting and Appraisals in PRD System. In Development system its displayed but not in PRD, Patch Level is same and Client is Open.... so please tell how to activat it.
    try to give best solution
    Thanks and Regards
    Dhaval Thaker

    what is your EA-HR patch level?
    check the note: 904109. i am not sure if it helps you or not

  • Change of Column Width in Objective Setting and Appraisals

    Hi,
    Is there any way to change the delivered width of a column in Objective Setting and Appraisals?
    Thanks,
    Mary Ann Kolnik

    The only possibility would be with a custom BSP. Easiest way would be copying the standard and make your adaption in the copy.
    See also <a href="/people/sap.user72/blog/2007/02/20/objective-setting-appraisals-the-web-environment.
    Regards and Groetjes,
    Maurice

  • Performance Management/Objective setting and Appraisals - To Hide elements

    Hi All,
    In PMS/Objective setting and Appraisals module, is there any BADI available to Hide elements( Criteria & Criteria group) on Sub status wise. Meaning, suppose i have Substatus A, B, C & D in status "2" ( In planning) and one of the VC element should be hidden in Status = 2 & substatus = A, B. But in "C" & "D" sub stauts it should be visible.
    If BADI is not available then is there any possible way out for the same.
    Thanks,
    Ashwini.

    There is no badi for this, it slipped of radar during the development of the hide element functionality.
    The only why to achieve the same would be by having a customer own UI and control it on UI level, but its an ugly way which I do not recommend.
    Regards and Groetjes,
    Maurice Hagen

  • Multiple transports in Code Inspector object set

    I'd like to be able to put a Code Inspector object set together with multiple transports and my current version (46c)only supports a single input.  Anyone know how to input multiple transports?
    Tim Barrow
    ADP

    Tim,
    Even the current version (7.0) supports just one transport request. Looks like that is ruled out, then.
    You could use the first tab (Select object set) to include multiple packages? Or you could use the 'free selection' to specify objects..
    Hope this helps.
    Sudha

  • ID CS6 RGB objects set to overprint = KO in PDF

    Hello:
    While I wait on the phone for Adobe support (+60 minutes now) I thought I'd post here to see if anyone in the community had any feedback on this topic.
    We recently discovered that objects created with an RGB build but set to overprint in InDesign will end up as KO type in an exported PDF file. I'm trying to find out if this is the expected behavior or if this is some type of bug in CS6. This even ocurs when all colors must be converted to CMYK or spot color, such as when exporting to X1a.
    From a technical standpont, RGB objects set to overprint are tagged with 'OPM 0' and CMYK objects are tagged as 'OPM 1'
    From our Enfocus resources:
    There are two “overprint modes”:
    Standard overprint mode, also known as “OPM 0”
    Illustrator overprint mode, also known as “OPM 1” or “nonzero overprint mode”
    The difference between both modes lies in the effect of the tint value 0 for one of the CMYK inks:
    In standard overprint mode (OPM 0), the tint value 0 of one of the CMYK inks in the foreground object has a knockout effect on the color rendering of the underlying object. In other words, a foreground ink with a C, M, Y or K value of 0 % erases the corresponding background ink. Here, the “foreground inks win” principle applies.
    In Illustrator overprint mode (OPM 1), the tint value 0 is neutral: it is ignored (as if it were “not specified”) and has therefore no effect on the color rendering of the underlying object.

    I'm trying to find out if this is the expected behavior or if this is some type of bug in CS6.
    Seems like expected behaviour to me. What happens on an overprint depends on the CMYK values of the over and underlying object. So the results of 0|65|0|0 and 0|65|0|1 are very different
    An RGB version of the pink would have unknown CMYK output values because any CMYK profile could be used in the CMYK conversion for print.

  • Objective Setting & Appraisals VS Appraisal System

    Hello,
    Trying to understand the meaning of customizing Objective Setting Appraisals instant of Appraisal System,
    Does anyone know if there is a way to transfer all the old Appraisal Models (BS Object) into the new Appraisal Template (VA Object) ?
    Another Question : Is it possible to continue using the old way (Appraisal System) with running projects and the Objective Setting & Appraisals for new needs? meaning - BAPIs like BAPI_APPRAISAL_CREATE \ CHANGE \ GETDETAILS will still work ?
    thanks !

    Hi Binu,
    I am not entirely clear about your requirement, but in OOHAP_VALUE_TYPE, for a specific proficiency value, if you have maintained a description for the value under 'Value description' then it will be displayed on the form within the 'Info' button.
    Regards,
    Priya.

  • Objective setting Appraisal

    Hi,
    I want to configure objective setting with appraisal. The flow will be from employee to Immediate supervisor to Next Superior. I am new to appraisal system Please can you guide me
    Regards,
    Vaman

    Hi Veman,
    You are asking a very vast question. You actually want to know how to configure an appraisal process.
    I can give you the main steps:
    First, you need to configure the appraisal template. This is done by transaction code OOAM or PHAP_CATALOG_PA. In order to create a template you need to configure several objects:
    >> The highest level is the Category Group, which is provided as SAP standard - choose the category group "Personnel Appraisals" (or "Personnel Evaluations").
    >> Under it you need to create the Category. You can determine a single category for all your appraisals or divide them to groups (e.g. appraisals for permanent employees, for employees on probation, etc.).
    >> under it in the hierarchy you create the template (VA object) which consist of Criteria Groups (object VB) and of Criteria (object VC).
    You want to create a process for the employee, direct manager and indirect manager. This is done many steps, as:
    Choosing the roles: "Manager", "Higher-Level Manager" and "Self" on the Category level
    Choose which columns and VBs/VCs each participant will be able to access
    Determine the relevant statuses and sub-statuses
    Determine if the process will be done as parallel (simultaneously) or one after the other.
    Determine how the grade will be calculated, according to each manager's grading
    Which user interface will be used to enter the appraisals (an ECC/R3, BSP, Web dynpro etc.)
    Authorizations
    The heart of the templates lays in the configuration done mostly for the objects VA, VB and VC.
    There are so many configuration elements and so many options - too many to be discussed here.
    BUT,
    I advise you to look into course HR510 - Personnel Development and Performance Management
    You can read the book SAP ERP HCM Performance Management, of SAP PRESS
    If you have questions of specific configuration elements, I can assist you.
    Good Luck!
    Liran

  • Objective Setting and Assessments

    Hello,
    I am working in Objective Setting and Assessments HR Project, I need some Appraiser & Appraiser Type
    Which is available in 0PAH_DS01,My all the reporting requirment is based on Infoset 0PAH_IS01, But 0PAH_DS01 is not availabe in that infoset, so Can i include that 0PAH_DS01 in Infoset to get the Appraiser & Appraiser Type.
    Is it any harm to do that.
    and I also want one field JOBFAMILY which is coming from hrp1000 -OTYPE, so do i need to enhance for that, IF yes that which infosource I need to enhance.

    any update pls.

Maybe you are looking for