Objects did not added to the transport request

Hi team
Pls advise, I've been trying to create a transport for some workschedules in client DDD.
But although I've created a transport and saved it, when I look at the transport or task, there's no objects saved in it. For the other clients BBB, CCC, when I do the same process, I would see the table T552a in the transport task and the list of entries generated. But in client DDD, it is always blank.
Can you please tell me how to investigate this issue.
Regards
Bhaskar
Edited by: bhaskar1818 on Dec 10, 2008 10:04 AM

You can manually add the object into that transport request number. Login into client DDD and go to SE01 -- Select the request-- go to Request/Task- object list - include objects- freely select object.
The reason could be behind this that transport request has been not allowed for the client DDD, if i understand correctly the problem
Regards
Subhash

Similar Messages

Object not added to the Transport Request

Hi,
We have a z-tcode thats a replica of SPAD for creating printers.
Once the printer is created, a prompt asks for creating a new Transport request(TR in short) and once the TR gets created, the printer finally gets attached to this TR.
This tcode works fine in 4.6 version. But not in ECC6.0 version.
In ECC6.0, the TR gets created and the printer too is created but its not attached to the TR.
I checked the codes in both the versions but could not find any difference between them.
One thing I noticed that the statement CALL transaction... within one of the sub routines(that adds the printer to the TR) has a parameter for message and it doesnot get populated with any entries,
while it does in 4.6 version.
Please suggest.
Regards,
Binay.

Hi,
In debug mode try passing the same message & check whether it works.
if yes, then you may hardcode the same.
Best regards,
Prashant

When is the entire function group added to the transport request

When you modify a functionmodule in a function group, only the object of the functionmodule( LIMU FUNC) is added to the transport request.
When you modify an include of the function group, the reportsource of that include (LIMU REPS) is added to the transport request.
But under some circumstances the entire function group is added to the transport request (R3TR FUGR).
Can somebody clarify under what circumstances the entire Function Group is added to the transport request?

I was actually looking for the reason why I would find R3TR FUGR objects in requests for existing function groups.
What I found out is that R3TR FUGR is added to the request when :
- the function group is created
- a function is renamed
- the function group is deleted
- you choose : Write Transport Entry, in the context menu of the Function group.
The actual problem was that in our upgraded system (ERP2005) we had a transport containing the function group (R3TR FUGR) and we thought none of these actions had been taken. After talking to the developer in question, I found out he did rename a function module, so I have my solution.
But thanks everybody for the insight.
Message was edited by: Dries Horions

Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

How to find the transport request........

Hi,
For particular info object I want to see the transport request
by which it has been locked.
Is there any way to find the transport request by giving the
object name ? (Not by SE10 , where we already knows the trnsport request)
Thanks,
Jeetu

Hi,
I will add one more option.............
In RSA1, goto Transport Connection. There Select your info object, drag and put on right side. Here you can see all the details (Last Changed by, Transport No, Package Name, etc......)
Hope this helps...........
Vivek

The RADIUS request did not match any configured connection request policy (CRP)

I setup NPS server and added a RADIUS Client access point, my project is to get a wireless user to authenticate using his/her AD credientials, my problem is i can't seem to authenticate my user
my NPS server is giving me this error log under Event Viewer > Server Logs > Network Policy and Access Services
    Reason:                The RADIUS request did not match any configured connection request policy (CRP).
but from my understanding i don't need to setup Connection Request Policies because i am using Network Policy
Please Help!

thanks for your reply, i setup a new NPS policy here is my error log
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
    Security ID:            NULL SID
    Account Name:            csdomain\rsingh
    Account Domain:            csdomain
    Fully Qualified Account Name:    csdomain\rsingh
Client Machine:
    Security ID:            NULL SID
    Account Name:            -
    Fully Qualified Account Name:    -
    OS-Version:            -
    Called Station Identifier:        0026.992f.6761
    Calling Station Identifier:        2477.0392.b0f8
NAS:
    NAS IPv4 Address:        192.50.2.2
    NAS IPv6 Address:        -
    NAS Identifier:            MYWAP
    NAS Port-Type:            Wireless - IEEE 802.11
    NAS Port:            35290
RADIUS Client:
    Client Friendly Name:        MYWAP
    Client IP Address:            192.50.2.2
Authentication Details:
    Connection Request Policy Name:    PEAP
    Network Policy Name:        -
    Authentication Provider:        Windows
    Authentication Server:        MYSERVER.csdomain.com
    Authentication Type:        EAP
    EAP Type:            -
    Account Session Identifier:        -
    Logging Results:            Accounting information was written to the local log file.
    Reason Code:            22
    Reason:                The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.

Function Module not being displayed in the Transport Request

Hi,
I Created a FM "RH_ACTIVATE_WFOBJECT_AFTER_IMP" in my SAP System. After I created due to problem in editing I have deleted the FM and also deleted it from the request.
I have re created the function module and if I see the object directory entry I find the following
Identical request locks
Request User Task/request Object
**** ***** R3TR FUGR RHWS
In the request I cannot find the function module but only the function group. Please help me to get my function module visible in the transport request.

Hi ,
When your creating the FM for first timw with new FGRP then no need to worry .
You can see only the FGRP in the transport request number and when you move this transport request to further systems your FM automatically transport with the FGRP.
Next time when your creating a new FM under the FGRP which is already moved to production you can see only your FM name under the transport request.
When you go to FGRP main program by follwing the path
FGRP -> Disply FGRP in SE37 you can see the main program of the FGRP there if you see one include with TOP and XX .
double click on the XX Include.
there you can see allthe FM under that FGRP.
Thanks
Naresh

I got a new lenovo desktop windows 8.1,installed itunes and synced my ihone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to ap

i got a new lenovo desktop windows 8.1,installed itunes and synced my iphone 4 no problems. then i imported a cd of songs which showed up in recently added but not in main library ,therefore it did not sync to the iphone. how can i get new songs to appear in the main library and sync properly
thanks
john

Check the songs are really not in the Music section of the library by clicking the magnifying glass in the search box and unticking Search Entire Library if it is ticked, then typing in the name of the album. If the tracks still don't show try closing iTunes and deleting a hidden file called sentinel from inside your iTunes folder. This should make iTunes run an integrity check on the database when you start it again. Make sure the tracks are checked before you try syncing again.
tt2

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))

One of my clients has his dpm server turned off for a long time. Now when that server is back online I cannot re-sync backup. First was database in suspect mode and I was not able to acess dpm console. Now when I fix that I cant re-sync job. I even tried
to delete on PG and recreate it but without success. Agent showing OK and it can comunicate with server. I have even tried to uninstall agent and re-install it but without luck.
ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))
That is the error what I get on all protection groups. Is there any one who can help with this?
And last thing is that DPM is crushing on recovery tab

Hi
Do you still need assistance with this?

Identify the transport request for released Objects from BW(any BW Object)

Hi
How do i identify the transport request in which i have collected the BW Object(Say Transfer rule) which got released to the testing system.
Please guide me.
Thanks,
Satya

Hi Satya,
Just follow these steps,
1)Go to the Update Rule and Double click on the Rule.
2)Click on Extras->Object Directory Entery>In hte Heading u can c Object.
3)This Objectr has Detials>R3TRUPDR-->Tech Name of Update Rule
4)Come to SE03
5)Come to Eiight Row-8 and Enter UPDR in the 3 Column adn the Tech Name in the 4 Column,TICK it and Execute
Now it will display when and all it gpot transported.
Similarly u can do it for Objects like MPRO for Multiprovider,ODSO for DSO,ETC
Rgds
SVU123
Edited by: svu123 on Dec 10, 2009 12:05 PM

Today I imported quite a lot of Audio CDs. When I wanted to listen to them I realised that most of them aren't in my library. And they did not appear in the recently added list either. Can anyone tell me what happened and where to find them? Thanks!

Today I imported quite a lot of Audio CDs. When I wanted to listen to them I realised that most of them aren't in my library. And they did not appear in the recently added list either. Can anyone tell me what happened and where to find them? It's really strange because all the imorts definitely finished. Thanks!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Changing the Transport Request of an Object(Report)

Hi,
By mistake I have saved one of my Custom Transaction Code( of a custom Report) under wrong Ttransport Request Number.
Could you please let me know the procedure to change the Transport Request number of any object like Report, TCode etc.
Regards,
Nitin

Hello,
Delete that perticular object from the request.
And save that object again , so , system will ask you for the request again.
Regards,
Naimesh

Error: A 'with' action failed because the specified object did not exist.

The weird thing is when i play the file on my computer it
gives me the little error but shows up, but when its live on the
internet it says its not working and doesnt show up. Can anyone
help me with this error?
Level #0: Frame=20
Movie Clip: Frame=1 Target="_level0.instance2"
Movie Clip: Frame=1 Target="_level0.mc_0"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_1"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_2"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_3"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_4"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_5"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_6"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_7"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_8"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_9"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_10"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_11"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_12"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_13"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_14"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_15"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_16"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_17"
Shape:
Movie Clip: Frame=1 Target="_level0.ctrl_mc"
Movie Clip: Frame=1 Target="_level0.instance1"
Movie Clip: Frame=1 Target="_level0._root.prev_photo"
Shape:
Movie Clip: Frame=1 Target="_level0.mc_current_photo"
Shape:
Movie Clip: Frame=0 Target="_level0.mask_mc"
Movie Clip: Frame=1 Target="_level0.mask_mc.mask_clip_mc"
Movie Clip: Frame=0
Target="_level0.mask_mc.mask_clip_mc.mask2_mc"
Movie Clip: Frame=1 Target="_level0.soundControl"
Movie Clip: Frame=1 Target="_level0.soundControl.instance8"
Shape:
Movie Clip: Frame=0 Target="_level0.mask_whole_mc"
Movie Clip: Frame=1 Target="_level0.control"
Movie Clip: Frame=8 Target="_level0.control.myLoader"
Shape:
Movie Clip: Frame=1
Target="_level0.control.myLoader.instance9"
Edit Text:
Target="_level0.control.myLoader.instance9.instance10798" Variable=
Visible=true Text = loading."
Movie Clip: Frame=1 Target="_level0.tishi"
Shape:
Edit Text: Target="_level0.tishi.instance5" Variable=
Visible=true Text = CONTROL PANEL"
Movie Clip: Frame=1 Target="_level0.mc_mouse"
Shape:
Movie Clip: Frame=2 Target="_level0.mc"
Movie Clip: Frame=1 Target="_level0.mc.booor"
Shape:
Button: Target="_level0.mc.booor.next"
Shape:
Shape:
Button: Target="_level0.mc.booor.prev"
Shape:
Shape:
Movie Clip: Frame=1 Target="_level0.mc.booor.autoplay"
Button: Target="_level0.mc.booor.autoplay.instance6"
Shape:
Shape:
Edit Text:
Target="_level0.mc.booor.autoplay.instance6.instance7" Variable=
Visible=true Text = PAUSE"
Text:
Edit Text: Target="_level0.mc.booor.photo_title" Variable=
Visible=true Text = exterior18"
Error: A 'with' action failed because the specified object
did not exist.
Error: A 'with' action failed because the specified object
did not exist.
Error: A 'with' action failed because the specified object
did not exist.

show your code with the trace() function that indicates the
object is defined (along with the output panel's result).

My password is no longer working.. I did NOT change it. I requested that it be re-rest and it would email me the steps to re-set. I've done this several times... I dont get the email w/ instructions.. Ive checked spam folder also.. please help

my password is no longer working.. I did NOT change it. I requested that it be re-rest and it would email me the steps to re-set. I've done this several times... I dont get the email w/ instructions.. Ive checked spam folder also.. please help

You can send iTunes an email about your password and they can reset it on their end and email you the temp password. When they reset the password they usually make it something generic like Apple06.11
You can email them here: http://www.apple.com/support/itunes/contact.html?form=el&topic=Express%20Lane%20 inquiry
If they don't get back to you, you can also call AppleCare: 1-800-275-2273 and see if they are able to reset.
Hope that helps.

Objects did not added to the transport request

Similar Messages

Maybe you are looking for