Objects disappeared

Post Author: yoav
CA Forum: Administration
Hi all,
All the objects in my CMC have disappeared although I can see them in the Webi and I the Object Repository Helper
I can also see under cmc >hom>folders: total folders:6 but I can't actually see themu2026
Does anyone have a clueu2026?
Yoav

If you have the OWB projects's backup as mdl file then you can create a new OWB repository and import those mdl and you will have the OWB design metadata . But you will loose the runtime information i.e execution , deployment .

Similar Messages

  • Make a parallax scrolling object disappear?

    I've been messing around with parallax scrolling and I'm at a point where I want to make the scrolling object disappear. So far the only way to make it vanish is to let it scroll off the edge of the page by default or to adjust the Opacity Scroll Effect to make it "fade". However, I'd like to have the object give the illusion that it's going inside/behind a stationary object on the page. The only thing I can think of is defining a viewport or something of the sort, but I don't know if that's possible in Muse. Anybody have any suggestions to create this illusion?

    Hi
    Using fading effect is the correct approach to the purpose you are after disappearing an object with scroll.
    Regarding the illusion that you want to create will be somewhat manual , where you have to use 2 identical scroll items . One starts scrolling normal as you have mentioned above and then disappears , other one starts scrolling on behind the page object on same time when previous identical object has disappeared. A bit tricky but you will have to specify the key position of both identical items such as way that one fades in and another fades out. This way it would be exact same effect.
    You can give it a try.
    Thanks,
    Sanjit

  • Interactive objects disappear in Reader 9.

    I don't know if anyone else is having this problem and I can't seem to find anything when I google it. I'm using Indesign CS3 to create a form with interactive objects such as checkboxes and pop-up windows. I then use Acrobat Pro 8 to add text fields and enable usage rights so that the form data can be saved. As long as I don't enable usage rights in Acrobat I can open the form in Reader 9 and all the text fields, checkboxes, and pop-ups are fine ... i just can't save any data that is input. If I do enable usage rights then when I open the form in Reader 9 I see the interactive objects for a split second and then they disappear. Reader 7 & 8 don't seem to have this issue so I'm not sure if this is a bug or I'm just missing something in the export options.
    I've uninstalled and reinstalled everything and have tested this on multiple computers so I'm at brick wall now. I would appreciate any advice anyone can give.
    Thank you

    >my department is dealing with thousands of students that need to be able to save what they type on the pd
    Better be careful with that. You could very possibly be violating the End User License Agreement.
    Enabling forms with Acrobat is for low usage amounts. You wouldn't want to get your school in hot water.

  • ADF BC View Objects: Disappearing where clauses

    Playing around with the 11g Technical Preview I find out that sometimes the where clauses - added to View Objects by means of the new "Join Type" field in the VO-editor UI - disappear.
    I'm not able to reproduce exactly and "on demand", but it seems to happen when the sources of more than one View Object are open simultaneously and/or the XML definition of a View Object is edited directly on the Source-tab.

    Today I succeeded in reproducing:
    Two tables:
    TAB_MASTER:
    ID NUMBER NOT NULL
    DESCRIPTION VARCHAR2 NOT NULL
    TAB_DETAIL:
    ID NUMBER NOT NULL
    MASTER_ID NUMBER NOT NULL
    DESCRIPTION VARCHAR2 NOT NULL
    TAB_DETAIL.MASTER_ID is a foreign key referencing TAB_MASTER.ID.
    Steps to reproduce:
    1. Generate default ADF BC objects from database tables.
    2. Open definition of TAB_DETAIL View Object.
    3. Go to the Entity Objects tab
    4. Add TAB_MASTER Entity Object to the Selected Entities Objects. Association and Join Type are filled in automatically.
    5. Go to the Query tab and go to SQL tab in de Property Inspector. Where clause is filled.
    6. Go to the Attributes tab and click Add from Entity...
    7. Add TAB_MASTER.DESCRIPTION attribute.
    8. Again, go to the Query tab and go to SQL tab in de Property Inspector. Where clause is still filled.
    9. Go to the Attributes tab and select MASTER_ID attribute.
    10. Click icon to add List Of Values
    11. In List Of Values dialog add View Object TAB_MASTER and add the correct pairs of List Return Values for the ID and (MASTER) DESCRIPTION attributes.
    12. After completing the List Of Values dialog go to the Query tab -> SQL tab again. The where clause added to join the Entity Objects (see step 5.) is cleared, resulting in a wrong SQL statement for the View Object.

  • Live Office SP3.4/Office 2010 - Live Office objects disappear on conversion

    I am testing Live Office XI 3.1 FP3.4 on a Windows 7 laptop with Office 2010 installed and have a question.
    I take an Excel 2003 file (XLS) file that has Live Office connections and open it in Office 2010. Then I save as an XLSX file. While saving I get a message that states:
    "The name, [1]_1_CRADDIN_DataGrid, either conflicts with a valid range reference of is invalid for Excel. The name has been replaced with 11__1_CRADDIN_DataGrid. You may still need to manually update any references to this name used in VBA code or as text arguements in functions. You must close and reopen the workbook before these changes take effect."
    I complete the save then close and reopen the file. When I go check for my Live Office objects, they seem to have disappeared (meaning I right click on what used to be a Live Office object, but I no longer see Live Office on the popup menu).
    Can't I convert my old data models to the new excel format? I am doing this because the XLF is taking a LONG time to open in Xcelsius 2008 SP4 with multiple server busy messages. I thought updating the Excel file might speed things up but since the Live Office objects are disappearing from my spreadsheet this is not working as expected.
    If any pointers can be given that would be great. If I have missed any documenation that may help me out, please let me know. I checked the Live Office documentation and the highest thing for XI 3.1 I see is SP3, no FP3.4 (or even SP4).

    How do I know if Office is 64 bit? If I go to the control panel, I see that "Microsoft Office Professional Plus 2010" is installed.
    There are no named ranges in my sheet.

  • Object disappears after pressing enter key

    I need to attach the transaction J1B3N to keep the connection objects.
    Perform the steps as the help of SAP:
    Object links to other SAP objects
    You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
    In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
    The processing logic must follow that of screen 1204 in program SAPLVC130.
    Create function module OBJECT_CHECK_XXXX (XXXX = object name)
    If the object can be classified, this function module already exists .
    Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
    After performing these steps can see the screen with the number of document tab Link Object, but I am having the following problem: I inform the document number field and press Enter this number some of the screen.
    Already remade several times but can not find the point I'm failing.
    Thank you,

    Hi Michely,
    could you please check if the necessary object is correctly mainatined in structure MCDOKOB too. Here the following coding part could be useful to analyse why the value disappears after hitting enter:
    Main Program     SAPLCVOB
    Source code of   LCVOBU02
    FUNCTION         KEY_ZU_OBJEKT
    SELECT SINGLE * FROM TCLO
           WHERE OBTAB EQ OBJEKT.
    IF SY-SUBRC NE 0.
      RAISE NO_OBJEKT.
    ENDIF.
    NAME = 'MCDOKOB'.
    IF NAME CP '*# '. ENDIF.
    WRITE '-' TO NAME+SY-FDPOS.
    IF NAME CP '*# '. ENDIF.
    IF NOT TCLO-KEYF0 IS INITIAL.
      WRITE TCLO-KEYF0 TO NAME+SY-FDPOS.
      ASSIGN TABLE FIELD (NAME) TO <KEYF1>.
      DESCRIBE FIELD <KEYF1> LENGTH LEN1  IN CHARACTER MODE.
      KEY1 = NAME.
    ENDIF.
    IF TCLO-KEYF0 EQ SPACE.
      KEY1 = ' '.
      LEN1 = 0.
    ENDIF.
    Here the keyfield is read from table TCLO and then the length is read from structure MCDOKOB for example. So it is necessary that the same data is maintained in table TCLO and structure MCDOKOB to grant the correct working for new individual objects.
    Best regards,
    Christoph

  • NetworkInterface objects disappear on Mac computers

    In our Java 6 program, we are trying to get the Mac address of all the network interfaces on the machine. It calls NetworkInterface.getNetworkInterfaces() to get a list of them. On Windows with the Sun JRE, everything works fine. However, on Mac computers, this method only returns instances of NetworkInterface for interfaces that are active. If the ethernet cable or wireless card are disconnected, the interfaces are no longer returned.
    Why would it do this? Running ifconfig still returns all of the interfaces regardless of their state. If I only wanted the active interfaces, I could call isUp() on the returned NetworkInterface instances to find and discard the inactive ones. However, the Apple JRE developers seem to have predetermined that we would never want them.
    Is there any way to get the inactive interfaces to show up? I could get it to run ifconfig and parse out the mac addresses, but I don't want users to be able to replace it with a dummy program and fool our application into thinking a nonexistent interface is there.

    it's hard to explain every situation but i created an example and as i was doing it i thing i know what's happening but still not sure why.
    here is the file i made
    download
    what i did
    1. made a symbol to be used as a mask (the symbol is just a rectangle with a black and white pattern fill)
    2. drew a blue rectangle
    3. made an opacity mask for the rectangle and placed in the masking symbol
    - so far that works as expected. if i make a pdf or print at this point it show up as it should
    if i do the following things, the pdf/print goes wrong
    1. if i duplicate the blue rectangle containing the masking symbol, the front most blue rectangle does not show up in the pdf or print
    2. if i insert an instance of the masking symbol, it too does not show up in the pdf
    3. if the masking symbol instance is the bottom object, all the objects containing the mask show up as the masking symbol plus i get an instance of the mask in the bottom left corner of the document
    4. if i make a symbol out of the blue squares then i can duplicate the symbol without it disappearing, but all symbols disappear in the pdf if an instance of the mask exist in the bottom most layer of the document.
    you can test this situations by changing the layer order of the objects in my document and looking at the icon preview.
    it seems like if i use a symbol as a mask, instances of that symbol can't exist in the same space.
    i know some of you may ask "why do you want to do this?"
    i deal with very complicated patterns and clients want to see them rendered out in different materials with shadows etc.

  • Anchored objects disappeared

    My anchored objects inserted into text have all disappeared. All layers are on. The text is there but the objects are not. How can I get them back?

    All layers are on
    @Annie – this is not relevant, because anchored objects ("inline" or "custom" makes no difference) are tied to the layer of their parent text frame.
    1. The objects could be "hidden".
    There is a contriol for that to bring back all hidden objects on a spread:
    alt + cmd + 3 (for InDesign on Mac OSX)
    2. The objects could be set to "No Printing" and you look at your document with the "View / Overprint Preview" checked. You can control the "No Printing" in the Attributes Panel.
    3. A combination of 1. and 2.
    4. The objects are removed…
    Could happen with a TEXT or GREP search/replace action that happens to include all anchor characters in your text.
    5. …
    Uwe

  • Anchored Objects Disappear When Page Moved

    I'm working in InDesign CS2 in XP environment. I duplicated a page that contains anchored objects. It was page one; the duplicate page is now page 5. I modified the duplicate page 5. Now I want the altered page 5 moved into page 1 position.
    When I move the pages either by dragging or by right clicking on the page icon and using the Move Page command, all anchored objects on the page disappear. I also cannot release the anchored objects because the release command is disabled when I select an object with the selection tool.
    Any suggestions?

    I got your file, and after looking at it, it's probably better not to post it publicly. For the lurkers, it's a draft government document, not yet ready for release.
    Anyway, I took a look at the file, first in CS2 where it was created, and then in CS3 to see if it would behave differently.
    First, the anchored objects aren't really gone, just temporarily invisible. if you select the objects and move the page, you can still see the selection outline. It's some sort of screen display bug/glitch, I think, in CS2. Exporting to .inx didn't fix it, so I think it's not corruption, and it doesn't happen at all in CS3.
    The bad news is I have no way to explain what the problem is, or how to prevent it from happening. The good news is I found a way to make them reappear! Select the text frame with the selection tool, and change its stacking order. I tried Ctrl + Shift + [ to send to the back, and Ctrl + ] to bring forward, and both seemed to work, though it may make a difference where in the order they start out. If one attempt doesn't work, try again, or send all the way back or forward.
    For what it's worth, this is only a display problem. Even when the anchored objects are not visible on the screen they show in both printed and exported PDF.
    Peter

  • Flex Objects disappearing automatically from QTP Object repository

    Application : Flex 3
    Automation Tool: QTP 10
    Plug-ins installed - Flex 3.0.0
    Whenever we try to add the flex objects in our application to QTP Object repository, the same is getting analyzed, added and gets disappeared automatically in seconds.
    Could there be a reason for this, we tried to uninstall & reinstall all plug-in & QTP as well. Still issue persists.
    Please help.

    Hi
    I am facing the same issue; but for our application. I am able to work fine with other Flex application, the issue is with only one application.
    Is there any reason or solution to this. Please advice.
    Thanks
    Komala

  • Imported Objects Disappear After Saving

    I have been working on a project into which I've imported 4 Illustrator objects (If you look at the first image below, the objects are a lightpost, two figures, the word StoryFirst and the word Media). I saved the 4 objects as separate files in Illustrator and then imported each one as "Composition" while leaving the "Illustrator/PDF/EPS Sequence" box unchecked.
    After saving the AE project last night, I reopened the project this morning and found this:
    As you can see, the lightpost and figures objects are still visible in the composition pane, but the StoryFirst and Media objects have disappeared. The files are still listed in the project pane, however, and you can still select the object layers in the timeline and you will get the object wireframes in the composition pane as if they were still there, but the actual objects themselves are no longer visible. As you can see in the picture, when I select a layer of the StoryFirst object in the project pane, the mini-preview in the upper left corner doesn't even display it.
    I've tried closing and reopening the project a few times as well as toggling on and off the eye switch on each layer in the timeline, both to no avail. I also tried right clicking on each layer and choosing "Replace File" and bringing everything back in again new. This makes the objects reappear at the moment I have the project open, but as soon as I save the project again, close it and reopen it, they've disappeared again! All object files are in the same place in my hard drive as they've always been. AE never prompted me with an error message that it couldn't locate files. This is a very bizarre problem I've never encountered before.
    Any help in solving this mystery would be greatly appreciated! Thanks everyone!
    Michael
    Founder/Director, StoryFirst Media
    www.storyfirstmedia.com

    In AI, check your layers palette and inspect the structure of your groups. There may be odd combinations of e.g. groups with empty clipping masks (that cover the entire artboard and are only there, because the graphics were imported from a legacy version of AI or another program). That could lead to misinterpretation where then AE would clip the entire artwork. Similarly, look for things like Livepaint groups or live pathfinder groups. Same for art brushes, pattern brushes, pattern fills etc. In case of doubt, always do an Object --> Expand, then select the artwork and choose "Release Clipping mask". Often a bit optimization will do wonders. Also, one thing that came to mind after I wrote my last reply, is to check your swatches. Since AE operates in RGB mode only, it may not deal correctly with spot color swatches (Pantone) and CMYK swatches...
    Mylenium

  • Making and unwanted object disappear

    I took notes while listening to the videoclip about removing unwanted objects and  tried to apply what I had learned to a photo that had some telegraph wires I wanted to remove. I am working on a Mac OSX 10.7.5.
    I right clicked on the spot healing brush , selected the 'content aware' option but couldn't get the wires removed. Then I  also tried to lasso the wires. I  selected in the Edit menu, the option 'fill'. I repeated the exercise three times but the wires did not disappear.
    I also tried again one time lassoing first but then got this message:
    "Could not rasterize because the pixel data for this layer is not directly editable."
    So I then had to undo the lasso in the edit menu at the top of the screen.
    Where could I have gone wrong?

    Hi Randy
    Thank you so much for trying to help me. I am a complete novice with Photoshop and am trying to teach myself from the videos so I apologise if I appear incompetent! 
    I tried to do as you suggested. I clicked on the image and then at the top scrolled down and discovered that 'RGB' was already selected so left it selected. I then selected 'Layer' on the top of the screen and scrolled down but could not find ‘root layer’. The only choices available were: new, duplicate layer, new fill layer, new adjustment layer, smart objects, video layer and none of these had an option of root layer in their drop down menus. Have I misunderstood you?
    Also was I supposed to lasso the wires before following your instruction?
    In addition, I have tried to insert the image to send to you and failed to do that too- how frustrating! I clicked on the camera symbol above  this box , then 'choose file' from my computer , clicked on the image I wanted to insert and despite  it coming up in the dialogue box and  clicking 'insert image'  nothing happened. I closed the dialog box and the image was not attached.  I tried twice more with no luck. I don't think the link below will help you as it appears to be a link you need to use on my computer not for someone else to access from afar.
    file://localhost/Users/Leora/Desktop/My%20Pictures/USA%20and%20Canada%202013/IMG_1870.
    I am truly sorry for not understanding your instructions but would really appreciate further help

  • Graphics object disappears

    Hi,
    My question is - why when I paint a graphics object (a java 2D object) onto a Frame , my graphics object appears on the screen for literally a split second and then disappears.
    How can I prevent this?
    Here's the code:
    public void paintSimple()
    Graphics h = null;
    show();
    h = this.getContentPane().getGraphics() ;
    Polygon p = new Polygon();
    p.addPoint(1,34);
    p.addPoint(23, 344);
    p.addPoint(234, 3);
    p.addPoint(12,42);
    h.setColor(Color.magenta);
    h.drawLine(1,222,333,44);
    this.getContentPane().update(h);
    Thanks,
    rpodolny

    Hi,
    Just a quick idea ...
    Your class possibly extends frame ...
    then overwrite the following:
    public void paint(Graphics g) {
    update(g);
    and ...
    public void update(Graphics g) {
    Graphics2D gd = (Graphics2D) g;
    Polygon p = new Polygon();
    p.addPoint(1,34);
    p.addPoint(23, 344);
    p.addPoint(234, 3);
    p.addPoint(12,42);
    gd.setColor(Color.magenta);
    gd.drawLine(1,222,333,44);
    //probably draw you Polygon somewhere ....
    I hope this is helping a bit. I think that the image is drawn and the over-drawn immediately after in the underlying methods. Now your drawing should be painted in every update so it should stay on the screen ...
    Hope this helps,
    Tim

  • Object disappears when camera zooms - help!

    I have a camera and an object. In the active camera view, when I zoom in close, th eobject disappears from the view. Curiously, when seen from above, eveything looks good. What's going on?

    Hi
    Does the Camera have
    • electronic/digital Zoom
    or
    • optical Zoom
    What Camera - Brand and Type id. ?
    Yours just curious - Bengt W

  • My multi-state object disappear's when I export to PDF but works in Preview mode?

    I created a multi-state object which is a series of logos that appear when a button is clicked. There are two buttons one is set to go the the previous state and one is set to go to the next state. When I view it in the preview mode it works fine but when I export it to PDF nothing happens when I click the buttons. Any help would be greatly appreciated.

    Multi-state objects are NOT supported in PDF. The PDF standard preceded the development of multi-state objects. It's now under the control of the ISO so may be slow to adapt.
    They work when exporting to SWF or with the Adobe Digital Publishing Suite.

Maybe you are looking for

  • Automatic payment not working. Why?

    I recently changed my credit card information and it looks like the automatic payment is set up. When I go to my skype number information it shows the updated credit card number. However, I received a notice that my number was being shut down for non

  • RAM - on app server x32

    Environment: Oracle App server X32 on RedHat X64 with 32G RAM My question is : APP Server it will user only 4G ram and 28 is unuse?

  • Optimizer_index_cost_adj

    Hi, Is there any documentation link by which i may know the formula for calculation of optimizer_index_cost_adj parameter in oracle version 10.2.0.1 for windows 32 bit machine. I knows that the value of this parameter influence index access, so i wan

  • Adobe creative suite

    Why doesn't Mountain Lion support Adobe Creative Suite? What options do I now have?

  • Synching issues

    i recently tried to synch one of my tablets [i have 2] with my desktop. I get an error message that my desktop software cannot connect with the connected device. despite trying to 'retry' [without any luck],  I decided to update/repair the os to corr