Objects does in QA/PRD remains inactive after transporting.

Hi,
I've been having an extrange problem.
some objects remains inactive in QA/PRD after they are trasnported from DEV.
when I see the transport log, everything is perfect, and the final code is 0.
¿does anyone knows why the objects does not activates in destitation system??
thanks for the help.
Mauricio

hi,
I check the job logs (User DDIC and job name RDDIMPDP), and there is no warning or error message.
The object I was trying to transport is an Update Rule. This Rule connects an ODS with an Infocube, and they both are ACTIVE in the QA System, and in the DEV system too.
Any suggestion??
thanks
Mauricio

Similar Messages

What are the objects that goes inactive after Transportation

Hi,
Usually,What are the objects that goes inactive after Transportation?
If you have any links for tranportation ,please send.?
Regards.,
Naresh.

HI,
the main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
u2022The Infobjects should be transported first in a separate request.
u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
Hope this helps.
regards,
mahesh.

Calendar object issues ... recompute remaining fields after change?

Hello all. I'm doing date manipulation and arithmetic, but I'm running into a problem.
I'm taking a date provided by a user and comparing it the current date. However, it's the month-end that I'm interested in.
I'm already creating GregorianCalendar objects from each one, and doing the set on the DAY_OF_MONTH field to the value from getActualMaximum(DAY_OF_MONTH).
The problem I'm having is that when dealing two dates from the same month, the two Calendar objects are >NOT< returning as EQUAL. After converting each object to a Date and running compareTo() (Side Bar: Why isn't compareTo() available in the Calendar class?) I'm not getting zero.
I tried a toString() on the two objects, and I can see that some of the fields are not exact ... the time field is "?", WEEK_OF_YEAR, WEEK_OF_MONTH are different, etc. I can see the protected method complete() in the API, but attempts to execute them (gcCurrDate.complete()) yield compile errors stating the method is not visible.
So how does one ask the system to fill in the remaining fields?
Thanks!
Steve

According to the API docs for Calendar:
"set(f, value) changes field f to value. In addition, it sets an internal member variable to indicate that field f has been changed. Although field f is changed immediately, the calendar's milliseconds is not recomputed until the next call to get(), getTime(), or getTimeInMillis() is made."

Infospoke inactive after transport

Experts,
In version 3.5, I have created an infospoke with transformation and unit tested in Dev box. After transport I have got an error 8 while importing in QA. I checked all objects if anything missing or inactive in dev box related with this transport. But could not find anything.
Looking into QA, I noticed infospoke was in revised version. Do you have any suggestions about what could be missing in transport? Or what should be the next possible steps to resolve the issue, please. Thanks.
Regards,
Nimesh
Message was edited by:
Nimesh Patel

Hi Anil, I am having the same problem. My ABAP routine puts the correct selection variables, but the infospoke is getting into 'Revised' version. Can you please let me know, if you have a fix for this?
Thanks,
Naveen

Info Objects Inactive after transport

Hi,
I have done a transport from PRD to DEV by collecting some info objects.
While doing the transport 'Overwrite' option has been taken. Most of the objects in Transport are overwritten in traget System(DEV).
But the info objects are inactive. Can anybody give reason why the info obejcts are inactive.
Any ideas are helpful.
Thank you,

Hi ,
I have checked the transport request and it is giving return code 4 at method execution.
the log says that program 'RDDEXECL' is cancelled, because of an ABAP Dump
'DBIF_RSQL_TABLE_UNKNOWN'.
Any ideas..
Thank you.

Report does not work in 2nd instance after transported

My SAP Script report does not come out correctly after its transport into a 2nd instance. The fonts displayed in the report don't look the same like what we have in instance #1.
The report originally created in the instance #1 is good, but after the transport, the fonts in instance #2 are larger and some of the contents are not properly aligned. Some part of the boxes are also missing. I would appreciate any suggestions of how to fix them. Thanks, Sam

Hi,
There might be a possiblity that the necessary style used in the SapScript is not transported to the New Instance and hence the Cosmetic issues...
Check whether all the associated objects like Style are transported to nre Instance or not?

Modified WAD report does not reflect in Production even after transport

Dear Friends,
We are using BI7.00 with Nw2004S. One of my report had been created in WAD (Web application designer). I have transported this report to production from Quality as in our case the Quality client is the base client for WAD report development. I collected the objects from the transport connection in RSA1 and transported the request.
After the above since user wanted changes in the report,i again modified the report and checked. Everything was fine in my Quality client but when i transported it to production, the new modifications are not appearing.
I have done the transport more than 2 times but still not changes is shown.
Experts kindly provide your helping hand.
Regards,
M.M

Dear Arun,
Thank you for your feedback. As per your guideline we executed the program RS_TEMPLATE_MAINTAIN_70 in both QAS and PRD clients and found that the html codes are same. Moreover we are still not able to get the modified web items in our PRD clients. All the caches were deleted and still no improvement. Following are the other activities and obeservations done by us.
1) Deleted the web item again in QAS client, Saved the report, recreated the web item, saved and then collected it in the request and transported and found that it is still not reflecting.
2) In our observation, we find that the objects are found collected in the transport request and the task of the transport request contains no element. We do not know whether it is right.
3) Missing of authorisation was also checked and found that it is not the culprit.
In the above context we are still groping in the dark. Kindly provide your expert comments.
Regards,
M.M

Form is inactive after transport

Hi,
I have a smartfrom it is available in DEV and Quality.
I have made some changes to the form in DEV and transported the same to QA but I can see the form is inactive in QA. whereas active in DEV.
I tried by creating a new TR and transprted the Form but I can still the form in inactive in QA.
the transport log tells the transport is successful, can anyone please advise me what can be the problem ?
Thanks & Regards,
Kalyan

Hi All,
Thanks a lot for your input,
I have checked the form in QA by uploading in DEV there are no errors in the Form.
I am not getting the reason why the Form is showing as inactive in QA even if all the other things are transpoerted.
The transport log also tells that import is successful.
Thanks & Regards,
Kalyan

CRM datasources inactive after transport

Hello,
I have few CRM data source which I have transported from Dev to QAS.
The datasources in Dev are fine however the datasources which are transported to QAS are in inactive status when I look in BWA5 except for datasource 0CRM_SALES_ORDER_I. All the other datasource are inactive in BWA5
When I check in RSA3 I get an error as Errors occurred during the extraction Message no. RJ012
However the Datasources are transported and are available in RSA6.
Is there a step I need to do to activate them. Could you please help me with this.
Regards,
KK

Hi KK
I debugged this and found that the missing component is an entry in table SMOXHEAD_S for your datasource which must match the entry in SMOXHEAD exactly.   Check in your dev box to be sure - the entry is there.
So I wrote this program which copies the entry from SMOXHEAD to SMOXHEAD_S.
Run the program at your own risk your CRM QA box. If the entry is there already then it will do nothing.
Please post to say if it works for you.
Good luck,
Guy
report zbi_fix_extractor.
data: ld_datasource type smoxhead-datasource value '0CRM_SALES_ACT_1',
        ls_smoxhead   type smoxhead.
*.check that the smoxhead_s table is empty
select single * from smoxhead_s into ls_smoxhead
    where datasource = ld_datasource.
if sy-subrc ne 0.
*..only do if there was no entry in the shadow table
    select single * from smoxhead into ls_smoxhead
      where datasource = ld_datasource.
    if sy-subrc eq 0.
       insert into smoxhead_s values ls_smoxhead.
    else.
       write 'no data available in SMOXHEAD for datasource'.
    endif.
else.
      write 'no change made: entry already in SMOXHEAD_S'.
endif.

In which situation I need to active objects after transport

Hi Experts,
I'm wondering in which situation I need to active object after transport? In some cases, I have to active transformation, DTP, infoobject, multiprovider.... Does any one make a conclusion of that?
thanks in advance.
Eric

Sometimes, because of impact of a transport some other objects will be deactivated, then we need to manuaaly activate the objects after transport.
Also, sometimes transport after import process could not be able to activate the objects, then also we have to activate them manually.
Or suppose, you have moved and infoobject, due to which some other objects become inactive (where ever infoobjects is being used), then we have to activate them manually, if you dont want to transport them.

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Object does not exist : MESSAGE OL 826 - Production issue

R/3 release 4.6C
Transaction: FB03
Custom WF: Triggering events: FIPP-CREATE and FIPP-COMPLETED
When we try to post a document (journal) the workflow gets triggered and reaches the approver. The approver approves it and then it gets posted.
Here in this case, after the approval the workflow running into error with u201Cmessage OL 826 Object does not existu201D
When I click on the message I get this information
Object does not exist   :   Message no. OL 826
Diagnosis :   You tried to create an instance of the object type EMPLOYEET with the
                    key 1234520080603. No instance of this kind exists.
                PERNR u2013 12345
     Date      - 03.06.2008
I checked this using the FM P_EMPLOYEE_CHECKEXISTENCE and it is working fine there. This FM is used in EMPLOYEET object for existence check.
Initially I thought the problem was with document and the buffer but after checking u201Cdiagnosisu201D message, it confirms me that this is related to Employee.
This is happening only to one employee and all other have NO issues.
I have checked with HR team and they reckon everything is fine from their side.
Since this is in Prod I am unable to debug and test.
I was looking into the previous forums to find the solution but couldnu2019t find RIGHT one. Could you please suggest any solution for this ?
Your help greatly appreciated.
Sreethan
Edited by: SAP User on Jun 12, 2008 12:13 PM

Dear Mike/Martin,
        Could you please explain a bit about the authorization problem?
        PERNR    A, B, C, and D do the posting the docs through FB01 and PERNR X usually do the approvals. the problem is happening onlyl with PERNR A ... if the approver has the auth problem then it could be same issue with other... please correct me if I am wrong.
    As Martin suggested I have contacted HR team but they say .... they dont see anything different or changes for this EMP. The personal record is coming from the EVENT FIPP-CREATE or COMPLETED so there is no manual interaction.
Just guessing: if this is the problem for all the employees then what could be the reason ? guessing that in random it is happening to this emp. He has posted 6 docs....all of them have the same issue. I checked last 3 months records and I did see Couple of workflows in last 3 months with the same error.... so just thinking if this is the problem with all emp happens onlly ramdomly.
Thoughts ??
Thanks & Regards,
Sreethan

Error IW351-------System: Status object does not exist

Hello,
I am getting bleow error while saving service order.
System: Status object does not exist. Message Numner IW351
Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
USEREXIT_SAVE_DOCUMENT_PREPARE in MV45afzz.
When i Try to save the service order i get the error messages which is coming from my validation
After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
As soon as i click on that i get a STOP messgae.
Which i as below.
System: Status object does not exist
If I comment all my code and write only error message then it comes.
but it does't come for information and warning message.
actually steps are
1. go to IW51
2. create notification then service order then sales order
3. if product hierarchy is different for material then it should display error on saving
4. it is giving error message(my error message)
5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
which turn me out of transaction.
but if i click on advance shipment icon without pressing enter its working fine..
my error message is a normal error message .
message e038(zcrm)
" service line must be same".
pls suggest.
Regards
LOKESH

Hi,
After MESSAGE add STOP. :
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
STOP.
or If ambiguity with usage of STOP being obselete use EXIT after message.
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
EXIT.
BR
Dep

Get ORA-12545: Connect failed because target host or object does not exist

Hi all,
My database is in RAC on a RHEL 5 and oracle 10.2.0.4 release, when i connect from client at the first time it's connected and after exit and connect again it gives the error ORA-12545: Connect failed because target host or object does not exist. and trying to tnsping i can reach the server and connect again it's connected and after disconnect and reconnect it gives the same error.
Here is my tnsnames from windows client:
CDRMGRAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.116)(PORT = 1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.117)(PORT = 1522))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cdrmg)
In this tnsnames , i'm using the virtual ip address.
Thanks for your help
Lucienot

hi,
check the ping trace.. for how long the connection establish..
check whether its breaking ,.
regards,
Deepak

ORA-12545: Connect failed because target host or object does not exist(EBS)

Hi All,
We are using Oracle EBS R12 on Linux x86 Enterprise Server.
We have installed vision database (both apps and db on same machine)
Host name: ERPDEV
IP:192.168.1.211
We can connect from client machines to our database using sqlplus i.e.
sqlplus apps/****@vision
Similarly tnsping is also successfully returning results.
Also following commands are returning results
ping erpdev
ping 192.168.1.211
ping erpdev.domainname.com
All above commands are running fine.
However we are trying to create new "Legal Address Entry" through "Legal Entry Manager". After filling all the details like Location,Country,City etc, when I push the apply button, getting following error messages:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1674 ORA-12545: Connect failed because target host or object does not exist in Package xle_legal_address_swi Procedure create_legal_address
I dont know why this ORA-12545 error is occuring through application although all of the above tests are running fine from client terminals.
Do any one have any solution for this???
Thanks
Farooq

Hi,
I really am new to this application.
I could not get this document.
Can you pls guide me, how can i fix this problem.
It's really imp to me to fix this.
--Satish

Objects does in QA/PRD remains inactive after transporting.

Similar Messages

Maybe you are looking for