Objects jumping after releasing mouse/entering information manually

Hello all,
I hope I can explain this without the benefit of video... I just started having a weird problem in Illustrator CS5. When trying to do some precise placement of objects and points, I notice that the objects/points are moving slightly from where I intended. For example, I am trying to place the end point of a line on top of the end point of another line. I am zoomed in all the way, I drag the point into JUST the right place, smart guides are on and read "intersect"—in other words, it's locked in, right in place. Then, when I release the mouse button, the point jumps diagonally up or down a few clicks. It's really weird too, because sometimes it will jump say, up and to the left, sometimes down and to the right. The only constant is that I can't place things where I want them. It is driving me nuts!
Also, I just noticed it happens even if I enter numerical information. For example, if I have a shape and I enter the width as 20 mm, after I hit return, it changes it to 19.756 mm.
Has anyone else had this problem? I have tried everything. Smart guides on/off, all the guides are off, snap to point, snap to grid, etc. all off. I have deleted my preferences and .plist and restarted... This is version 15.0.2 and I don't think there is an update available.
Any help or advice you could offer would be greatly appreciated. Thank you so much in advance!

You are welcome, ornmnt.
I believe you should have a look at the File>New document settings. The setting was introduced in CS5, seemingly under the assumption that all users would prefer to have it on, at least in RGB documents with the Web document profile or Flash Catalyst document profile.

Similar Messages

New object M_LPET_LGO after release change

Hello,
we are in the progress of a release change from ECC 5.0 to ECC 6.0.
Now we are testing the authorizations and roles.
Some user got the error (/nSu53) that the object M_LPET_LGO is missing.
When we analyze this object in SU24, we did not find any transaction assigned to object M_LPET_LGO ????
Gruß
Toni

Hi ,
guessing, found a note from 2004 there is correction note (770961) probably SAP has created the object by themselves for ECC6.0 so that customer can add this element manually based on the need.
lets wait for some expert from SAP to answer, I have seen two major objects like this so far. Did SAP forget to insert them into a transaction or they found it be useful along with various other MM transactions?

Object locked after Release and Transport to QAS/PRD

During an attempted recovery of our DEV system, a tranport request that had been previously released and transported to QAS/PRD was copied back into the DEV system, over-writing an open change request (and associated lock) on the program.
As a result the object shows as 'Locked' in DEV, but the lock entry is on a 'Released' transport.
I have reviewed tables E070 and E071, and as expected the entries for the program show that the transport was released.
Table TLOCK contains an entry for the program indicating that it is locked under the change request described above, that has already be released.
I logged a message with SAP, and was directed to create a new change request and assign the program to that request. While this does work, and allows me to make corrections and transport them, it does not assign a lock to the new transport, and does not clear the existing lock.
The other comment in the message was that once a transport is released, the only other option is to 'hack the tables', but I am not sure I am ready to go that route.
Has anyone ever encountered this situation, and if so, do you have any situations as to how to clear the lock entry ?
Thanks in advance for any assistance you can provide.
R. Runtz
SAP Support, Government of Manitoba

Hi Robert
You can unlock objects using transaction SE03:
SE03 > Requests/Tasks > Unlock Objects (expert tool)
Imre Takácsi-Nagy
Senior Support Consultant II.
SAP Global Support Center Austria
Netweaver WEB Application Server ABAP / JAVA

Object disappears after pressing enter key

I need to attach the transaction J1B3N to keep the connection objects.
Perform the steps as the help of SAP:
Object links to other SAP objects
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130.
Create function module OBJECT_CHECK_XXXX (XXXX = object name)
If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
After performing these steps can see the screen with the number of document tab Link Object, but I am having the following problem: I inform the document number field and press Enter this number some of the screen.
Already remade several times but can not find the point I'm failing.
Thank you,

Hi Michely,
could you please check if the necessary object is correctly mainatined in structure MCDOKOB too. Here the following coding part could be useful to analyse why the value disappears after hitting enter:
Main Program     SAPLCVOB
Source code of   LCVOBU02
FUNCTION         KEY_ZU_OBJEKT
SELECT SINGLE * FROM TCLO
       WHERE OBTAB EQ OBJEKT.
IF SY-SUBRC NE 0.
RAISE NO_OBJEKT.
ENDIF.
NAME = 'MCDOKOB'.
IF NAME CP '*# '. ENDIF.
WRITE '-' TO NAME+SY-FDPOS.
IF NAME CP '*# '. ENDIF.
IF NOT TCLO-KEYF0 IS INITIAL.
WRITE TCLO-KEYF0 TO NAME+SY-FDPOS.
ASSIGN TABLE FIELD (NAME) TO <KEYF1>.
DESCRIBE FIELD <KEYF1> LENGTH LEN1 IN CHARACTER MODE.
KEY1 = NAME.
ENDIF.
IF TCLO-KEYF0 EQ SPACE.
KEY1 = ' '.
LEN1 = 0.
ENDIF.
Here the keyfield is read from table TCLO and then the length is read from structure MCDOKOB for example. So it is necessary that the same data is maintained in table TCLO and structure MCDOKOB to grant the correct working for new individual objects.
Best regards,
Christoph

I want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?

This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6.

Plus sign after entering information in PDF Form

Good morning!
I have a PDF form that I made. I'm relatively new at this. Actually this is my first form and my boss is now wanting me to turn more of our forms into fillable PDF's. Which is fine. It was easy to figure out but now I am running into a problem where a plus sign is poping up after entering information. She wants me to fix it but seeing as I am playing around making these it's a bit above my head. Do you know how to get rid of these plus signs? Do you know why this is happening? It only seems to be doing it in these fields as well.
Thanks for the help! It's greatly appreciated.

The "+" is used to indicate an text overflow condition or there is more formatted text than can be displayed. One gets rid of this by either making the font size smaller or the size of the text field larger.
Acrobat does not have a dynamic field type or a field that reflows to match the entered text. LiveCycle has this type of form and PDF format but mobile devices cannot yet process LiveCycle created forms.

Way to Send Purchase order Information to XI after Release?

Hi All,
Can anybody suggest me a way how can I send purchase order information to XI immediately after releasing the PO.May be User exit, Idocs,BTE?
Thanks in advance?
Anil

Hi,
Since you have to send the Release information to XI.
Best way is to send thru IDOC.
IDOC Type is :ORDERS05
Thanks

Live meeting - After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually

Live meeting issue:
After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
1. It seems OK on Live meeting client settings.
2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
3.can schedule live meeting success.
but issue persists.

Live meeting issue:
After click Join the Meeting, it prompted for MeetingID, Entry and Location are blank, need to key in information manually
1. It seems OK on Live meeting client settings.
2. Then uninstall and reinstall live meeting client and addons. live meeting version now is 8.0.6362.41
3.can schedule live meeting success.
but issue persists.

WHEN-MOUSE-ENTER ? Developer 10g release 2

Developer 2.1
WHEN-MOUSE-ENTER
but developer 10g release 2 not exists this trigger
?

Hi!
Can somebody tell me why triggers WHEN MOUSE LEAVE and WHEN MOUSE ENTER don't execute on web?
What shall I use instead?
null

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

Transform box "jumps away" on mouse click

When I work with many smart object, I often move them around using ctrl-T (Transform tool). But sometimes they're smart objects which almost jump out of the canvas the moment I click on them or when I try to resize the box, it gets squished at the moment when I hold down the mouse. Sometimes the objects jump so far out of the canvas that I can't reach them anymore.
This doesn't happen when I completely disable OpenGL. But it still happens when OpenGL is activated, but extended drawing is disabled.
This is maybe the ony problem I have with OpenGL, but it's an ultra-annoying problem. It's impossible to work with Photoshop when this bug kicks in.
Now the question would be: Does anyone else have this problem? And what can be done against it apart from disabling OpenGL?

There are a lot of Nvidia 8600m GT in laptops that are defective. I used to own one and took it back. The GPU chips are defective and over heat. There was a fix out that updated the bios and also some driver fixes that turned up the speed on the laptop cooling fan. Google the 8600 and you will get a lot more information.
Ninarama wrote:
Well I got a laptop with an nVidia 8600m GT card. I would rather not disassemble my laptop and change my graphics cards to operate a program I already spent a fortune on buying it.
This card has 512MB and I think it should be able to handle this when I work on a small 160x600 banner (that's where the problem happened last time).
The drivers for this card are another issue: They're about lets say 20 different versions of which some work, some don't work so good, and the newest one is unfortunately a big bunch of sh*** so I have to use an older one. Choosing the right one was a hard task, the one I have right now is the only one that doesn't freeze my computer every 2 days or so. So if I touch that driver again I risk the whole stability of my work station.
In my opinion, it's one of the many openGL bugs adobe should take a look at. I use many other applications that use openGL (like blender3d, games) and there never have been any problems. And I have seen many other people having photoshop openGL bugs in other areas.
It cannot be that there are maybe just 4 graphic cards overall where photoshop runs okay and on all other 500 remaining graphic cards they're bugs.
But thanks for your effort anyway!

Print after releasing PO.

Hi Friends,
I am taking print immediately after release. Now I am getting 1 copy.Can I take 2 copies. What i Have to do for this?
Regards,

Dear Prasanna
Please do to ME9F, enter the Document no( PO no. ) in the message data application- EF, if you have already taken print out please enter "1" in procesing status. and execute.
you will have list of the document and no of times print taken in the screen.
Tick the check box and go to message details you will find output line, select the line by clicking in the extreleft and press the button " repeat output" and save the arrangement.
Come out and again use the ME9F screen with details as earlier but processing status as " 0" instead of 1. Execute it, inside you will fine the document alone for processing.
Take out as many prints as you want directly or if u have SPOOL request getting generated you can go to either SP01/SP02 Txn code and can give as many prints as you want. Do not delete the spool number if you wish to have more prints in future and remember the spool no for future use.
Regards
SAM

Changes in PR even after release

Dear Gurus
In purchase Requisition change (ME52N) it is allowing to change PR Quantity and Price even after released from the higher authorities.
What Configuration has to be done so that After release of PO system should not allow to do any changes in Purchase requisition.
Where as the purchase requisiotn changes has to be done only after the higher authority asks to make changes i.e the higher authorities has sent for revision.
Also plz let me know how can the higher authority set the purchase req for Changes in SAP (Any configuration has to be done for that).
Or any customizing settings required.
If the Changes is done in PR then again release strategy should be applicable.
Please guide me.
Regards
shailesh

Hi SHailesh,
In your release procedure for PR's. For the release indicator, in the field changebill enter
Options:
1 - Cannot be changed (no changes possible)
4 - Changeable, but new release in case of value change or strategy change
The above will resolve your issue.
if helpful award points
Regards,
Vivek

Errors when entering responses manually

I have been encountering an error, when manually entering responses to an existing (and open) Form in Adobe FormCentral.
We are currently collecting registrations for an annual event, and the majority of people register online (via the form). However, less than a quarter of all of the participants still use snail mail for registration. This is not a problem, it just means we have to enter them manually.
My coworker has been entering them, and has had a number of issues. She was clicking to 'Add a Row' and then typing the information in. This worked for awhile, but has sinced caused a number of issues. For instance, she will click on the first field and start typing and the information will be visible, but then it will go blank when she clicks to enter the next field. We have tried to 'Clear Formatting' and deleting cell contents, but it just seems like there is something wrong in the program. She has stopped clicking 'Add a Row' and instead has just resorted to hitting return from the last field, which allows her to add a new row, in which she has to clear formatting before it will accept any content being added.
This adds an extra step, which is slowing down the process considerably.
In addition, when she is entering in longer information, if she pauses, it will automatically clear the contents of the cell. So, if she starts typing 123 Longwood Blvd, but pauses to double check spelling or the number, it disappears. She is frustrated to say the least! Is there a setting to change how long you can be active in a cell? Is there a field, much like the formula bar in Excel, where you can type the content in instead?
Is there something we are missing? I did a few searches, and didn't see anyone else with a similar error or issue, so I have decided to start my own. I thought it might be an issue with browser, but that doesn't seem to be the case.
Any thoughts and potential ways to fix these issues?
Thank you in advance!

Sorry about the problem.
Can you please share the form with me ([email protected]) so I can investigate.
Also can you tell me what OS/browser and Flash Player version are you using? To check Flash version you can use http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html. If you don't use the latest one, please upgrade to see if helps.
Is there a setting to change how long you can be active in a cell? Is there a field, much like the formula bar in Excel, where you can type the content in instead?
No, we don't have such field, only in place editing allowed.
Thank you,
Roman

Update teminated message after releasing and saving PO

Hello Friends,
After releasing and saving PO in ME29N ...when pressing BACK button...i am getting a pop message with "updated terminated".
then i enter...in inbox the below message i am getting.
System ID....   DEV
Client.......   600
User.....   ABAP
Transaction..   ME29N
Update key...   BAC6150D3B4CE853F588CFC55F23
Generated....   17.04.2007, 11:08:13
Completed....   17.04.2007, 11:08:53
Error info...   00 671: ABAP/4 processor: PERFORM_TOO_MANY_PARAMETERS
Even I debugged ...with break point satement with 'message' but not able to capture the "updated terminated'.
Let me know how to sort this bug??
With Ever Smile & Warm Regards,
Madhu..!!

Hi,
Go to ST22 Transaction and Analyse the DUMP of this clearly in detail
and discuss the same with a MM functional consultant and solve the issue.
reward if useful
regards,
Anji

Objects jumping after releasing mouse/entering information manually

Similar Messages

Maybe you are looking for