Objects last change and history of task/method usage

Dear all,
I'd like to find out the last modifcation date and also the user who did it. Do you know if there is a possibility to display the user and also the date of the last change within UCWB for instance for task or method change?
The task/method settings in SEM-BCS are time dependent: Do you have any idea if it's possible to see the time frame in which a method is in use?
Example:
I've assined method M1 to task A in period 01/2009. Since 01/2010 method M1 is not any longer in use and was substituted by method M2.
Is there any report, transaction, table or option to check this constellation? At the moment, I've always to change the parameters in order to find out differences, but this is not very comfortable.
I thought that if I change a task for a period that then this change will become effective for all following periods. But this is not the case. Is this system behaviour correct? For instance, customize a task in period 01/2009 and afterwards the same task in period 01/2008. Settings in period 01/2009 remain the same.
Thanks in advance for your help!
Best Regards,
Daniel
Edited by: Daniel Lampe on Aug 26, 2010 4:42 PM

Hi Daniel,
Is there any report, transaction, table or option to check this constellation?
- none that I'm aware of.
I thought that if I change a task for a period that then this change will become effective for all following periods. But this is not the case. Is this system behaviour correct? For instance, customize a task in period 01/2009 and afterwards the same task in period 01/2008. Settings in period 01/2009 remain the same.
- it's the real system behaviour. When you do everything consequently (by time) - everything is ok. But, if you change something in the past periods and do not repost all entries afterwards- expect the trouble. Though, even reposting may not correct the situation - because of the SAP's time dependency treatment.

Similar Messages

  • [svn] 4394: Adding last changes and comments on behalf of Kaushal for his radial and linear gradient transform calculations .

    Revision: 4394
    Author: [email protected]
    Date: 2009-01-05 13:13:51 -0800 (Mon, 05 Jan 2009)
    Log Message:
    Adding last changes and comments on behalf of Kaushal for his radial and linear gradient transform calculations.
    QE: Not yet.
    Doc: No
    Checkintests: Pass
    Modified Paths:
    flex/sdk/trunk/modules/fxgutils/src/java/flash/fxg/swf/AbstractFXGGraphics.java
    flex/sdk/trunk/modules/fxgutils/src/java/flash/fxg/swf/TypeHelper.java

    After posting I and lots of research I realized that I need to dive into
    PaperVision 3D as way to get where I need to go.
    However, if anyone has a solution to adding text to this code which rotates with the cube - let me know.
    Thanks

  • Material specification and Inspection plan - Task list usage

    Dear Friends,
    In inspection type  Task list usage is assigned
    For Example
    inspection type 01  -  usage - 03
    inspection type 05  -  usage - 05
    inspection type 06  -  usage - 07
    inspection type 10  -  usage - 06
    In my scenario i want to use all the above inspection type for a product
    if i use mateial specification there is no any problem with my  Task list usage
    If suppose i use inspection plan do i need to create different inspection plan with different usage
    or is it possible to create one inspection plan with all the above usage
    what about universal usage 03  can i use it
    i try to use but system does not triggering inspection lot
    can any one Suggest some ideas
    Many Thanks & Regards
    Raj

    Hi Raju,
    All of first pls understand the concept of Task list and specification.
    If you need to inspection any material in very systematic manner, where you will have well segregated operations where the appropriate Work Centers will be bind and under that hierarchy MIC will be attached. The inspection will be governed by some inspection points. And according the the same Samples will be calculated. When you wanna go with all these functionality then you must have to use Task list (Inspection plan).
    And if you don't wish to have these functions then simply go with the material specification.
    Now it comes the actual query about task list usage.
    If there is a common inspection plan is supposed to be used for all the inspection types for your material then you can prepare only one inspection plan, put ant of the Usage to it it can be 05 or 03 universal. But what you have to do is,
    Go to SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute and set the Task list usage as the same it is set in the inspection plan for all those Inspection types for which that common inspection plan is supposed to be used.
    Note:- There is no any link between inspection lot creation and task list usage of inspection plan.
    Regards,
    Shyamal

  • Get last changed date by Program ID/Object type/Object name of a task

    Hi to all.
    I'm looking for a way to get last changed date of an object by task number(CR). Any SAP function or utility someone has??
    For example if I have a task with the object list:
    R3TR PROG  ZSD_ORD_COND_P
    R3TR TABL    ZCNDSLCTN
    LIMU  REPS  ZSD_ORD_COND_CLS
    R3TR TRAN   ZZDIS
    R3TR VIEW   ZSD_VBAK_KONV
    I need to get last changed date for each object.
    Thanks,
    Yuval Kaduri, Cellcom, Israel.
    Edited by: yuval kaduri on Mar 2, 2008 2:59 PM

    Hi Venu, thanks for the input.
    In the table I don't have all changes made in objects that the CR is not released. I need to know all changed date of objects even if the CR is not released. There are  few tables containing the date and time object last changed for the deferent types but I'm looking for a function or some utility someone wrote that gets the CR line info as - PgmID/Obj/Object name - and gives back last changed date and time.
    Thanks,
    Yuval Kaduri, Cellcom, Israel.

  • Need FM to get Last change date of Objects in package

    Hi All,
      Is there any Function module to get Last changed date of all Objects in a package .
      How to get the last change date of class,methods,function module.....
      I can get last change date of programs from TRDIR....UDAT....Similarly how can I get for Function Module and Class Methods. 
    With Thanks,
    Dina.
    Message was edited by: Dinamol Sasidharan

    Go/double click on the affected cubes you want to see the time stamp.
    click the Extras(tab on the upper of part of SAP) or simply 'Ctrl + F5'.
    Box will appear.
    Click on Logs for Save/Activate so you will see the linfo for the users who used this cube.
    Then put time restriction for From and To(always the current day and time).
    Then execute, all of the users who changed then saved/activated that cube will appear on that timeframe you view.
    Hope this help.

  • MS Project to detect task level changes and record a date modified in custom field

    I need to know the date and time that a task field (mainly task name, start, finish) has been changed. 
    I found this topic within EE and it works great but...
    http://www.experts-exchange.com/Software/Office_Productivity/Project_Management/Q_27879745.html#a38636192
    If (for instance) you change a duration which affects predecessors and only the task that you changed gets a date/time stamp.

    John,
    Thanks for the help.
    I have posted this to EE and received one response from the guy who answered the question in the link I provided.  Here is his recommendation to a similar question (underlined at end) and it works great but does not work for changes to successors. 
    Only the record that receives the actual change gets stamped.
    I did think of the change highlighting but not sure how to take advantage of it.  I need to know the order that the changes occur in a session as well as the time of day.  That is why I thought a time date/time stamp would work for both. 
    Is there and event for rescheduling of successors?
    What is project looking at to see changes for the "change highlighting" format.  Is it an event that can be captured.
    Hi,
    the pointer to events above is correct. This is what you need to do:
    1. in Microsoft Project open the VBA Editor (Alt+F11). On the left side you'll see the "ProjectExplorer". Expand the "ProjectGlobal (Global.MPT)" piece.
    2. In the first section of "ProjectGlobal(Global.MPT)
    " you see "Microsoft Project Objects" and below that "ThisProject(Global.MPT)".Doubleclick it and insert the text between
    the --- into the Editor window on the right.
    Sub Project_Open(ByVal pj As Project)
        Call modEvents.StartEvents
    End Sub
    3.  In the second section "Modules" add a new MODULE. Name it "modEvents". Copy the text between the --- into the new module:
    Private oMSPEvents As clsEvents
    Sub StartEvents()
            Set oMSPEvents = New clsEvents
    End Sub
    4. In the third section "Class Module" insert a NEW CLASS MODULE. Name it "clsEvents". Doubleclick and insert the text between the --- into it
    Private WithEvents MyMSPApplication As Application
    Private Sub Class_Initialize()
        Set MyMSPApplication = Application
    End Sub
    Private Sub MyMSPApplication_ProjectBeforeTaskChange(ByValtsk
    As Task, ByVal Field As PjField, ByVal NewVal As Variant, Cancel As Boolean)
        tsk.Date1 = Now()
    End Sub
    Sounds like hell? Yes, but that's how it works: the first part is always executed when you open a project -> the "StartEvents" initialises the new class and tells Microsoft Project to use events (which
    is does NOT in the default). The last part "watches" all changes and whenever you change something it sets the Date1 field to the current date and time.
    Please let me know if you need any help!
    Regards
    Thomas

  • Last change date and time of Reservation Record

    Hi All,
    I have a requirement to find out the last changed date / time of a reservation (table - RESB). I was not able to find any change document object for reservation. Please let me know what I can do for this.

    Hi Mitrajit,
    You can find the change history for any Data element from CDHDR and CDPOS, if for that data element Change Document is enables.
    If you check SBTER in SE11 unser tab Further Characteristics, there is one chekc box 'Chnage Document'.
    If you tich this checkbox, a change entry will be populate in CDHDR and CDPOS Table.
    Check Table DBTABLOG if its maintan the chnage entry for SBTER.
    Thanks
    Piyush
    Rewards points, if helpfull

  • I've changed my last name and want to change the details in my .mac account. Any ideas?

    I've recently changed my last name and although I've created an alias (now @icloud.com sadly instead of @mac or @me!) I can't figure out how to change my name so that the 'sender' name reflects my name change. Any help gratefully received! Just one of the many tasks I need to complete to change my name and not off to a good start!

    Hey Newgirl85,
    Thanks for using Apple Support Communities.
    After reviewing your post, it sounds like you need to change the name on your Apple ID. Sending email with the wrong name can be a frustrating situation for sure. You can update your name at https://appleid.apple.com/ .
    Frequently asked questions about Apple ID
    http://support.apple.com/kb/HT5622
    How do I change my Apple ID Name or personal information?
    You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.
    iCloud: Create or change email aliases
    http://support.apple.com/kb/PH2622
    Have a nice day,
    Mario

  • I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!!

    I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!! That's wierd because I didn't download any app or anything else since my last backup and on the other hand about 3000 pictures are gone, how come there is not enough space left! I also check my usage on my phone and it shows that i have about 7.0 GB pictures!!! BUT my photos is empty! I want my picture back on my phone any solution anyone?

    Thanks for your reply!
    I just called the guy who changed my LCD and asked him what happend, he said there were no pictures on your phone when you gave it to me! i know he is lying tho!
    My apple warranty is over and I have to pay them to get some help over the phone!

  • Project Server 2010 - Modification date and name of the person who made the last change in the project

    Hello everybody
    I'm with a doubt.
    I got in the business
    environment Project Server 2010 and
    would like to get the publication date,modification
    date and name
    of the person who made
    the last change in
    the project. It is possible
    to doby the native
    resources or is
    there any query in
    SQL Server to perform a
    query of this information.
    Thank you.
    Obrigado por contactar o fórum Microsoft Technet!

    Hi Hezequias,
    You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
    get the data based on the projectUID. 
    The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
    For the "last modified by", I think it is not stored in any place.
    But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
    date and username automatically into a custom enterprise field.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

    I recently changed my iCloud account because someone stole my last phone and changed all my passwords for both my iCloud and emails account. So when I changed my account I accedently erased all my contacts is there anything I can do? (It wasn't backup)

    I'd say your best bet is to try to regain access to your old account. Call 1-800-MY-APPLE, and ask to talk to the account security team. Hopefully they can verify you are the account owner, and then reset the password for you.

  • How do I change an Apple ID payment method to 'None'? I've tried everything and the only solution is to get a new e-mail and start all over again. Any other options?

    How do I change an Apple ID payment method to 'None'? I've tried everything and I found the only solution is to apply all over again with another e-mail address. Any other options?

    Buy an iTunes Music Card and redeem it to your account - the "none" option should be available then.

  • HT201272 I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore the

    I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore these?

    "I did make a full back up of my phone prior to updating the iOS"
    Itunes content is not incliuded in the backup that itunes performs.
    Audiobooks are not part of icloud and cannot be redownloaded.
    You can try contacting itunes support and asking for an exception.

  • I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd li

    I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.

    You can download Creative Suite 5 here:
    Other downloads
    To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
    Adobe ID, sign in, and account help
    See the bottom of the page for a link

  • I set iCloud up last week and the next day when out in the field I could not get Outlook to open up.  I want to change my settings so I can get mail at home or in the field

    I set iCloud up last week and the next day when out in the field I could not get Outlook to open up.  I want to change my settings so I can get mail at home or in the field, not just when i'm at home.  I have a PC and fios internet with Verizon at home.  I have a Sprint air card in the field or access an available wifi.  I want to change my settings to allow for receiving email in the field.  What's the point of an air card and icloud for backup fi it doesn't work in the field for some odd reason?

    Apple - Support - Mail Setup Assistant

Maybe you are looking for