Objects locked in different tasks while implementing the oss note

Hi frnds,
I am facing a problem while implementing the oss note and it shows the message that the objects are locked at different tasks.
Can anybody give the solution.
Sur

Hi Suresh,
Locked in different tasks means there were some repairs carried out for the objects and the transport request is not yet released. Some possible solutions are
1. Ask the owner of the original transport to release the transport. The the object will be unlockedand you can make modifications to it.
2. Ask the user of the above said task to add another task for you in the transport request.
3. See if you can delete the object from that transport and include all the changes in a separate transport of your own and transport. (Please check if any dependencies are there with the other objects in the transport).
Regards
Barada

Similar Messages

Implementation of OSS Note-304290

Hi,
This is Kiran Kumar. We have an issue with the US tax classification.
Issue is Tax classification is not passing to the subsequent documents like Invoice to Debit Memo Request /Credit Memo Request. Hence Tax values are becoming zero. ususally XR1, X2, XR3,... are coming from the Vertex system (US tax system). Hence SAP suggested to implement the OSS Note-304290
if you refer the OSS Note-304290 they are suggesting to new condition base formula and attaching the source code (Given in correction instructions-167690 ) in the base formula and finally assigning this Condition base formula to the tax conditions in the pricing procedure.
if we refer the current pricing procedure , Tax conditions XR1,....XR6 are with the AltCty is 301 to 306 and AltCBV is 16.and the requirement is ZERO.
Please suggest me where the new condition formula has to be applied- is it to be implemented in AltCty or AltCBV
guide me to proceed furthur
Regards,
Kiran Kumar

Hi ,
Please go through the folowing points to implement the new source code.
1. Use transaction VOFM to create a new condition base formula for Application 'V' (Sales/Distribution) in the customer name range.
2. Implement the attached source code into the newly created formula. Save and activate this.
3. Now assign the new base formula to the affected tax conditions in the used costing procedures (transaction V/08) for field Alternative condition base value.
Hope it helps.
Regards,
Pasapula.

HT4623 I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?

You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6

'No Administrator found for the task' while releasing the task in AR31

Dear Gurus,
i am facing the issue 'No Administrator found for the task' while releasing the task in AR31 while doing Mass Asset change.
Please help to provide the solution.
Many thanks.
Kumar

Dear Kumar,
error 5W141 indicates that the configuration for workflow is not in place fully.
1. SWU3 => Automatic customizing
You find the customizing of the workflow under Basis -> Business
Management -> SAP Business Workflow. There you can check the minimum
customizing for workflow:
2, Please check in transaction OAWF if the responsible users are
    assigned to the workflow tasks
    Menu path: Basic Functions
                 Assign tasks to agent
                    Correct worklist
                    Release worklist
                    Correct and release worklist
3, In addition check if the users are assigned to the workflow-tasks      in the basis-component (transaction
     PFTC).
   Menu path: Task type: TS   - Standard task
       Task     : corresponding task (e.g.8010 - correct worklist
The relevant logic is: if the system finds that the agent or user is defined, it will go straight to T-code SO01. And the user can edit the work list there.
Following is a reference notes :
            322526 Analysis for workflow problems
Regards Bernhard

Issue in implementing the sap note 1401975

Hi All,
I am trying to implement the sap note 1401975 in the 4.7 version( SAP_APPL 470, Patch level 26). to implement this note i have to create a Function Module with export parameter of TYPE SEPA_STR_DATA_MANDATE_DATA. the problem here is the structure SEPA_STR_DATA_MANDATE_DATA not available in my system and no instructions are given in the note to create this structure. i have also implemented the prerequisite notes 1305012, 1360908.
your Quick response will be highly appreciated.

Reason and Prerequisites
As a prerequisite, you require Noter 1090321 for SEPA Direct Debit and the two SEPA credit transfer Notes 1305012 and 1360908. Check whether these notes have already been implemented (search in the ABAP Dictionary (transaction SE11) for the structures FPAYHX_MDT and FPM_SEPA and check in transaction SE37 whether the function DMEE_EXIT_SEPA_21 already exists) and implement them if necessary.
To be able to use the B2B (Business to Business) function, you also require enhancements in the SEPA third-party management (SAP Basis) that are delivered in a separate note.
Check this prerequisite notes 1090321, 1305012 and 1360908 and its corrections present in your system
Edited by: praveen reddy on Feb 1, 2011 2:47 PM

How to implement the security notes in Java System.

Hi All,
For the ABAP systems we use RSECNOTE to implement the security notes, but how do we do that in Java systems?
Any reference or guidance will be of great help.
Thanks,
Akash.

RSECNOTE is for ABAP only, and I dont think there is any equivalent for Java.
For Java , security note will guide you on how to implement.
It could be manual changes or via SDM or JSPM.
Regards,
Pinkle

While creating the credit note getting error

hi
while creating the credit note getting error
MsgType       Message                                       Msg.no.
E                  Enter country                                 216
E                  Sales document was not changed   219
pls suggest me

Is COPA activated? If yes go to teh button PA and give country value in the line item.
Reward if useful
sarma

How to implement an OSS Note if you only know the key??

Hi,
I wanted to know if we can implement an OSS NOte if we only know the SSCR key.
Any help will be appreciated.

Hi,
You can implement an OSS note through transaction SNOTE.
Just download the OSS note from SNOTE and it will automatically be inserted in the standard code.
If you are not able to download the note check for the note correction given.
Implement the note correction in the standard program after getting access key.
Regards,
Subhashini

How to export &import the OSS note?

Hi Team?
How to export &import the OSS note?

Dear Jagadish,
Download SAP Notes from the SAP Service Marketplace and upload them in Note Assistant.
Start Note Assistant (transaction SNOTE).
Download the SAP Note from SAPNet - R/3 Frontend. To do this, choose "SAP Note Download" (Ctrl + F8) and enter the relevant SAP Note number. The downloaded SAP Note appears in your worklist under the category New.
Read the SAP Note!
Check whether the SAP Note entails manual activities. (See also answers to questions concerning ABAP Dictionary objects and messages.)
If this is the case, first perform the manual activities.
Implement the SAP Note. To do this, choose Implement SAP Note. During implementation, Note Assistant may download prerequisite SAP Notes that must be implemented before.
Also read and check the prerequisite notes! This is necessary, since they may also contain manual activities. If you don´t do this, the syntax check can bring up an error of the relevant field of the function module, for example.
Reward points if it helps.
Regards,
Naveen.

Implement an OSS note

hi everybody
i have to implement an OSS note 99507
where its said to create a program zlisdel
ive created it,should it be executed when the note is still in process or i shd wait, during the implementation of the note, the program is executed automatically?

If the note says to execute the program, then do so anytime after the program has been activated. I assume that you needed to create the program and the note put the code in it for you? If so, go to SE38 and make sure there is code in the program and activate, then you can run it directly from there. The note will not execte the program for you.
Regards,
Rich Heilman

Revert back the OSS notes

Hi Experts,
I have implementaed one OSS notes through SNOTE T.code. This OSS notes is not a solution for my issue. Now i need to Revert back the OSS Notes( Means don't required this OSS notes in my system).any body tell me what are ways i will reach this.
Thanks
Jaya reddy

Hi,
Select the SAP note you have implemented and press CTRL + F2 or choose option deimplement SAP NOTE or RESET SAP NOTE Implementation.
KR Jaideep,

What's the oss notes?

what's the oss notes ?
is this offical technology documents?
somebody of you can tello me ?
thanks!

SAP provides support in the form of Notes also and this is called OSS. Can check the link Sree provided.
Just for an example if you face any error in your system. Then there is error number associated with the error. Then you can search for the OSS not for the error number, and the note will give you possible solution to your problem.
You do have notes for any details for every thng and any thing related to SAP.
Regards,
Rohini

Photoshop CC - Cannot control + click to select a different shape while using the pen tool?

I used the pen tool constantly in photoshop cs6 and would often use control + left click to select a different shape while still using the pen tool.
I'm now forced to switch to the move tool to select another layer? Why was this feature removed / changed?
Fix: After fooling around more, here is how I fixed it:
The new Direct Select Tool by default is set to "active" layers. Switch it to "all layers"
Message was edited by: Joe Horan

A new problem = Selecting multiple points with control + click + drag is selecting ALL shape layers... Jesus christ, why was this changed????
I now have to double click the shape I want to select? Why? What is the point of this?

Not getting the Tasks while defining the project parameter in PJM ?

Hello Guys,
Can any one help me on this query,
Tasks defined is not available in the list while defining the Project Parameter in PJM ?
I have done the below neccessary setups,
The control level is set to Project in PJM Parameters.
Project Cost-Collections is enabled for Inventory Organization.
Cost group is set to projects.
Inventory Organization has been mapped to same OU as Project Organization.
added Project Manufacturing classification to Inventory Org.
Iam just checking did I miss any setup ?
Regards,
Satish

Hi
If the PJM organization is setup with Control Level = Project & Task, then the material transactions , and WIP jobs completion locators will expect you to enter the project number, and task number.
If the PJM organization is setup with Control Level = Project, then the material transactions , and WIP jobs completion locators will only expect you to enter the project number, not the task number. In that case you will need also to setup the Task Auto Assignment Rules, so system will pick up automatically the task number when transactions are cost collected and interfaced to Projects Costing.
In any case, the Project Parameters form deals only with the list of projects (not tasks), and thier assignment to the costing and planning groups.
Dina

Creating the BAdI implementation: se19(OSS note )

Hi Experts,
I have to apply a Note 1330434 ( FBL5N: Performance improvement by changed selection.) in our ECC.6.0.
The 1330434 note says,
Solution
When you implement a new BAdI in the line item display, the selection logic can be optimized. The system only reads the clarification case attributes for the line items that are also displayed.
Import the specified Support Package.
To implement the correction instructions manually, proceed as follows:
1...
2. Implement the corrections in accordance with the correction instructions.
3. Creating the BAdI implementation:
Call transaction: SE19.
Under "Create Implementation", choose "Classic BAdI".
BAdI name: FI_ITEMS_CH_DATA
Implementation name: FDM_AR_ITEM_ATTR_GET
Implementation short text: FSCM-DM: Selection of attributes in FBL5N
Activate the implementation.
How to do the third step --> .."3. Creating the BAdI implementation: " ?
when I go to se19,
Under "Create Implementation", choose "Classic BAdI"... give FI_ITEMS_CH_DATA or FDM_AR_ITEM_ATTR_GET
and then press button 'create impl.'
then it says "Badi definition FI_ITEMS_CH_DATA does not exist."
I struck up at 3rd part of the note (BADI creation/implementation part of the note.).
Please suggest me how to apply this Badi part of the note ?
YOUR HELP WILL BE HIGHLY APPRECIATED!
Thanks in advance.
Edited by: sam kumar on Jul 22, 2009 12:22 AM

Are you sure this note is for your system. I am also working in ECC6. I checked but I couldn't find the defibition too. Make sure note is for your component version and if it is report this problem to OSS.
Edited by: Gungor Ozcelebi on Jul 22, 2009 8:37 AM

Objects locked in different tasks while implementing the oss note

Similar Messages

Maybe you are looking for