OBJECTS_OBJREF_NOT_ASSIGNED while transporting.

We are trying to transport Infoobjects and it fails with the following Error "OBJECTS_OBJREF_NOT_ASSIGNED"
We also tried to Install the infobjects in the target system form BI content and it gave the same error.

Hi
Check with your basis guys whether transport system connection is fine or not?
Regards,
Chandu.

Similar Messages

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error while transporting webservice datasources

Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.Sen

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error while transporting infospoke with BADI in BW7.0

Hi:
We have an infospoke with Transformation ( ie with BADI) in BI7.0.
While transporting to Quality box it gives error.
"Transfer structure /BIC/CZZTXXXXX3 could not be generated
Error when activating InfoSpoke ZTXXXXX3.
Message no. RSOH010 "
Could you please help in rectifying the error.
PS: we tried transporting BADI first and then the infosoke but still its failing.
Regards!
Saniya

Hi
Check the forum link below
Transport Problems with Spokes that have BADIs
Thanks

Error while transporting the transfermactions

hi,
i am transporting transformations dev to qty. while transporting i am getting error msg:
1) No Rules exists.
Transformation : Rules 1 could not be imported.
Transformation : Rules 2 could not be imported.
Transformation : Rules 3 could not be imported.
No fields were supplied.

Hi Shilpa Reddy
Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
Hope its clear a little..!
Thanks
(P159793)K M R
**Assigning points is the only way of saying thanks in SDN***
>
shilpa Reddy wrote:
> hi,
>
>
> i am transporting transformations dev to qty. while transporting i am getting error msg:
>
> 1) No Rules exists.
> Transformation : Rules 1 could not be imported.
> Transformation : Rules 2 could not be imported.
> Transformation : Rules 3 could not be imported.
>
>
> No fields were supplied.
Edited by: P159793 on Dec 30, 2008 4:55 PM

Error while Transporting Request

Hi All,
we have ECC 6.0 on Unix environment.
we had copied a production client with group selection, as we wanted all the three system PRD,DEV,QLT in sync.
the export was succesfully done.i copied Cofiles & Datafiles which are generated in DEV & Quality server,then i add request no in transport queue. the time when i copied transport request was not releasing from development.we checked the destination it was full so we removed the old request. then req is releasing.
after that i deleted the Cofile & datafile from OS level of DEV & QLT & trying to delete the reques from request queue. it is deleted but when im refreshing the queue its coming back in the queue.
while transporting other request its giving me error.
please help out me.

Hi Aasmi Gawas,
Please could you post the error?
We don't have a crystal ball to see the errors in your system...
Best Regards,
Erick ILarraza

Error While Transporting Smartforms from 832 client to 834 client

Hi
I released my Smartform and Program...
and i told our basis ppl to Transport the Code from 832 to 834
but while transporting they are Getting this error
Transport Control Program tp ended with error code 0212
Errors:could not access file as supposed.
My question is
Y they r getting this error?
is it link to Abap Program..
bcz they are telling that there is a wrong in my Program...
Bt my Program is working fine in 832 client...
Can any one help me on this?

Smitha,
If you haven't done any changes in the program then there is no need but you are saying you have created error messages.Haven't you tagged the changes related to the smartform as well as the Error messages (ie message class) in the same request?
If you have different requests one for error message and one for Smartform,then see to that both are transported.If smartform is using any of those error messages then you need to move the request which has got error messages first and then only the smartform related requests should be moved otherwise it will give a dump becuase by the time Smartform is moved to 834 the error messages request is not yet moved.Hence sequnece while moving the transport requests is very important.It is always advisable to have all the changes related to a program in one request.
And added to that do check the link given by Gautam too.
K.Kiran.

Error while transporting Datasources in Production

Dear All,
I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
Such errors have occured for most of the Datasources.
Can anyone let me know
1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
2) The possible solution to correct the error.
Request your kind help to overcome this problem.
Regards
Shalabh

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error While Transporting the DSOs

Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Can anyone please help me out with this problem.
Thanks,
Shalaka.

Hai shalaka,
jus check some points in u r transportation.
check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow after,or in data flow before ,might be u have selected the in data flow before ,so the datasource error is happening here
check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
Suri..

Error while transporting function grp from lower version to higher version

Dear Experts,
While transporting the function group and function modules from system A to system B, I am getting the below error
"Program SAPLZATSCSNG_EINB, Include LEINBF10: Syntax error in line 000068
Field 'GF_ETS_MODIFIED' is unknown. It is neitherin one of the specified tables nor defined by a 'D"
System A is a lower version SAP system and system B is a higher version. I compared the code of Include LEINBF10 in both the systems and there is a data declaration of field GF_ETS_MODIFIED in system B. But this is missing in system A.
Please guide me for this issue.
Thanks in advance.

Thankyou for your reply Rob.
Actually I am transporting the function group and modules from my development system to the client development system.
I dont have any other option but transport the files.
Is there any possibility to modify the include without applying a patch or upgrading my system?
Edited by: ShwetaD on Apr 15, 2010 10:24 PM

Error while transporting using CTS

Hello Everyone,
While transporting the ESR changes from Dev to integration environment i am getting this error.
Its a SOAP to RFC scenario and first time it worked fine. today when i did some changes and wanted to move again through CTS its giving a problem . Its SAP 7.11 version.
CTS Deploy Service - Version 0.93 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL =
SoapFaultCode:5 Authentication failed. For details see log entry logID=1ADC6A3175029F4D000000040025
>>>80B2 in security log.
Deployment
End date and time : 20120119234349
Ended with return code: ===> 12 <===
Thanks
Ravi

Hi Ravi,
Please check this forum thread which talks about same issue:
CTS+ For PI Error: SoapFaultCode:5 Authentication failed
Regards,
Ashutosh

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while transporting the TR to production

Dear experts,
I am facing the issue of TR error while transporting it to PRD. I have already checked, the table is active both on DEV & on QUI. What should I do to transport this without any error? Thanks in advance.(Please find attached screenshot.)

Hi,
this looks like you forgot a transport request or have transported in the wrong order.
Check that the table ZPLANTS is active (or has been activated with this transport request in step IMPORT).before the generation starts. Please check also the complete IMPORT protocol.
Regards,
Klaus

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

OBJECTS_OBJREF_NOT_ASSIGNED while transporting.

Similar Messages

Maybe you are looking for