Objects panel in different versions of Fireworks

Hi,
I am doing a "LearnDirect" online course which teaches
"Fireworks 4". I
own Fireworks MX 2004.
Question 1:
Which is the later version FW 4 or FW MX2004?
Question 2:
In connection with animations, the course refers to the
Object Panel (to
be opened via the Window menu). I cannot find an Object Panel
anywhere
in my version of Fireworks.
Where is the equivalent tool/panel that I should be looking
for, and
what is its name?
Thanks for your help.
Adrian

Adrian,
1. FWMX2004 is two versions newer than FW4.
2. More than likely in the Properties panel after you click
on the object.
alex
adrian stock wrote:
> Hi,
>
> I am doing a "LearnDirect" online course which teaches
"Fireworks 4". I
> own Fireworks MX 2004.
>
> Question 1:
>
> Which is the later version FW 4 or FW MX2004?
>
> Question 2:
>
> In connection with animations, the course refers to the
Object Panel (to
> be opened via the Window menu). I cannot find an Object
Panel anywhere
> in my version of Fireworks.
>
> Where is the equivalent tool/panel that I should be
looking for, and
> what is its name?
>
> Thanks for your help.
>
> Adrian

Similar Messages

Shape Object panel disapear in french version of MOTION3 !

I found a bug in motion 3. It's about shapes and paintings.
When you draw a shape with the paint tools and make few changes in the in the shape object panel, this panel disapears. You can't access any paramaters after that.
I found a solution
This bug appears when you use the French version of motion 3 (PPC and Intel MAC).
Use a litle program call LANGSWITCH to switch in the ENGLISH version of motion and the bug disapear. Very strange.
Hope this topic can help the french users.
Cheers
Sorry for my ENGLICH, I'm french

Thank you very much for your update, Ravikumar, I appreciate it.
I run the command on English version OS and French version OS, please see the result below, the first one is from English version OS.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>systeminfo | findstr "Memory"
Total Physical Memory: 955 MB
Available Physical Memory: 375 MB
Virtual Memory: Max Size: 1,979 MB
Virtual Memory: Available: 1,380 MB
Virtual Memory: In Use: 599 MB
C:\Users\Administrator>
I ran the command systeminfo | findstr "Mémoire" and got the result below.
Microsoft Windows [version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.
C:\Users\Administrateur>systeminfo | findstr "Mémoire"
Mémoire physique totale: 2 047 Mo
Mémoire physique disponible: 1 213 Mo
Mémoire virtuelle : taille maximale: 4 095 Mo
Mémoire virtuelle : disponible: 3 095 Mo
Mémoire virtuelle : en cours d'utilisation: 1 000 Mo
C:\Users\Administrateur>
Can guys who are in charge of French version OS have a look on this problem ? Thanks.
Jemy

Same object size (front panel) with different screen resolution

Hi everybody,
I realised an application, and I try to instal it on various computer. The probleme is that they haven't the same screen resolution, so the front panel is not the same on each computer. It is possible to build an application which have the same front panel with different screen resolution ?
Kriss.

Hi Krisss,
switch off any "adapt to screen resolution" switches in the VI properties...
You should also define "same front panel" and "same object size"! Do you mean the same pixel size or size in mm or size in percent of screen?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Different versions of Siebel

Please let me know whether we can use JCA or any other api to connect to different versions of Siebel namely 7.5 and 7.8 without invoking any jars provided with Siebel. If incase anybody has faced this problem.
thanks in advance.

Yes. You can use http to post a Siebel XML-formatted
message to Siebel. You specify one of the following actions to be performed on the XML message:
Delete
Upsert (Insert/Update)
Query
The result is that a corresponding Workflow is executed to process the message. A Siebel Workflow is a customized business application for managing and enforcing business processes.
Use http to POST the message to the Web server. The Siebel WebServer Extension invokes the specified Business Service which, in turn, starts an internal Workflow.
The Workflow invokes the Siebel EAI XML Converter, which converts the information from XML into the Siebel internal format and presents it to the Siebel EAI Adapter. The information is then sent to the Siebel Server via the Siebel Object Manager. If any data is to be returned, the Siebel EAI Adapter can pass the result to the EAI XML Converter and send the data back to the http client as a Siebel XML message.
You may want to consider using the httpsoap Binding Component. You can go to http://java.sun.com/javaee/index.jsp and click on the free downloads tab and download the Netbeans 5.5 Enterprise Pack Early Access to start playing with this.
Good Luck.
Fred Aabedi

Can NI-PSP be used to communicate between machines developed with different versions of LabVIEW?

Hi all,
A customer has a large PC application developed with LabVIEW 2010 SP1.
They would like to add extend their system with a cRIO-9075. According to this document (ftp://ftp.ni.com/pub/devzone/tut/crio_software_versions.htm ), the minimum supported version of LabVIEW (with Scan Engine support) is LV 2011.
To minimize risks, it is preferred that we don't upgrade LabVIEW for the main application, which is atively being used in production.
I was thinking of developing the cRIO software in a newer version of LabVIEW (say, LV 2013 SP1), and using shared variables only to communicate between the PC and the cRIO.
Is this a viable option? Does it matter if the PC and the cRIO have different versions of the LV runtime?

It shouldn't matter, but then with shared variables you can never know for sure -- there are so many things that can make them break.
You might be money ahead to write the comm using TCP/IP. You know that will work.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Different versions of animated image in single swf file

I am making a game which has several objects (beds, crates, tables) that can be placed on a grid.
The objects are created in flash and exported as individual .swf files. Each object can be rotated. To do this I create 4 frames in each .swf and draw a different version of the image in each frame. This allows me to 'rotate' an object in actionscript by simply going to the next frame of the swf movieClip.
This simplifies things a lot for me, as it follows logically that an object will have one image file (swf) for all orientations. However, I've hit a problem in that I would like the object to have an animation. Does anyone know if there is a way to do this? or perhaps another technique I could use.

I think It's best to explain with an example. Let's say I have a television that I draw in four different frames with different rotations. The first frame has the television facing in a south west direction. The 2nd frame has a south east facing television and so on. This is what I have at the moment. What I'm wanting to do next is add an animation to the television, e.g. display something moving on the screen.

I cannot download the trial version of fireworks!

i cannot download the trial version of fireworks!

This is the only technote that I could find relating to downloading CS4 products.
http://kb2.adobe.com/cps/407/kb407699.html
See if anything there applies to you. Other than that, I have no idea why it would crash 2 different browsers - sorry.

Navigation within swf files that use different version of actionscript

I have multiple swf files that need to link up together, the problem is this, some of the files was developed a few years ago with Flash MX and actionscript 1 while some of these files was developed recently in CS 5 with actionscript 3.
Is it possible to navigate within different version of actionscript files in the same flash player?
I found that actionscript 1 file will not work once i have navigated to actionscript 3 file.
Any suggession or solutions would be highly appreciate.

Actually, it will not work properly. Given, the code behind all these swf(s) is Object Oriented then there is a solid chance of getting them to communicate with each other without any issue. Once suggestion would be to centralize the navigation into its own swf and then dispatchEvents and have the listeners handle the rest. I am sure there are other avenues, but I would do it this way so if there any other such file(s) in the future, all you will need to do is hook the plumbing up and off it goes. Now if the code is anything but 'Object Oriented' then it will take good chunk of time to get the navigation going. However way you decide to pursue it, test it rigorously so there aren't any foo surprises.
Thanks.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.

The current version of Aperture requires 10.7.5 or later.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Downloading previous version of Fireworks CS4

I own Fireworks CS4. A while back I subscribed to Creative Cloud and it replaced my Fireworks CS4 with the latest version CS6, I believe. But now I changed my subscription to Creative Cloud LightRoom and PhotoShop only and now would like to get my Fireworks CS4 back. I was given a download page on which I clicked on the Mac/English version of Fireworks CS4 File 1 (Trial) and File 2 (Extras). Both of these resulted in an error page with this error dialog:
HTTP ERROR: 404 /support/downloads/dlm/main.jsp
RequestURI=/support/downloads/dlm/main.jsp
Can someone help me around this error and get these downloads to work?
TIA,
BB

Make sure you have cookies enabled. If it continues to fail try using a different browser.
An alternative download option:
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running the current version. The backup file should be restored to a server with version '14.0.0.6106' or later

while Restoring a Site Collection from a different server i got below error in SharePoint 2010.
Kindly let me know , which patch i have to install along with the download link please. i am unable to find the correct patch to download..
Thanks in Advance,
Tarun
TARUN

Hi,
According to your post, my understanding is that you get an error when you restore a site collection from a different server in SharePoint 2010.
I recommend that you can try to click the “KB2536599” for SharePoint 2010 version 14.0.0.6106 to download the patch from the following links and install the patch in your environment.
http://blogs.technet.com/b/moss_it/archive/2011/08/15/lista-di-versioni-di-sharepoint-server-2010-o-sharepoint-foundation-2010-wss-4-0.aspx
http://support.microsoft.com/kb/2536599
After the installation, you need to run the Configuration Wizard. Later you should be able to restore this site collection successfully.
For more information, you can refer to:
https://ammarfassy.wordpress.com/2012/11/29/restore-spsite-your-backup-is-from-a-different-version/
https://social.technet.microsoft.com/Forums/en-US/cb9fb524-2a65-4a59-8f09-fc86366dd1c2/restore-errorversion-of-14006106-in-power-shell?forum=sharepointdevelopmentprevious
http://blogs.technet.com/b/stefan_gossner/archive/2011/07/12/june-2011-cu-for-sharepoint-2010-has-been-re-released.aspx
http://www.sharepointdesignerstepbystep.com/blog/SitePages/SharePoint%20versions.aspx
Best Regards,
Yumi Fu

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running The backup file should be restored to a server with version '12.0.0.6318' or later.

am trying to restore the bak file into a new site collection in my sp 2010 standalone env.
am getting error
PS C:\Windows\system32> stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C:\mBKUPCOPY\Sharepoint_bankup.bak"
STSADM.EXE : Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running
the current version. The backup file should be restored to a server with version '12.0.0.6318' or later.
At line:1 char:1
+ stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C: ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Your backup is ...6318' or later.:String) [], RemoteException
+ FullyQualifiedErrorId : NativeCommandError

As stated in the other thread on this topic you can't restore a 2007 backup to 2010, it needs to be upgraded.
https://social.technet.microsoft.com/Forums/en-US/31c70f0a-5d89-4308-895b-af0c2b249114/restore-the-site-collection-from-moss-2007-to-sp-2010-site-collec?forum=sharepointadminprevious

Have just been told by BT that I need a new/different version of Thunderbird to work with the new BTMail system (used to be BTYahooMail) - do I?

I have had btinternet email for years, and Thunderbird for a long time too and have been happy with both. Unfortunately, I am not technical enough to understand most of the help or instructions on the Thunderbird support/info pages, but did manage to get TB set up in the first place (ages ago) and it seems to have worked well since. However, on Friday both of my BT accounts (two numbers, therefore two sets of BT email addresses) were moved over to the new BT Mail from the old BT Yahoo mail. I was unable to log in to one of them, but the other one was fine - I had some 'screen sharing' help from a BT technical chap to sort it out. However, Thunderbird was unable to conect with the email servers. I told BT and the tech chap tried to sort it out on the screen share, but was unable to (and I was unable to follow what he was doing). Some months ago, I made some changes, as requested by BT, to enable the transfer to go smoothly (!) but the man changed some things on Friday, I think, as well. He was unable to fix the TB problem and I can't figure it out at all, and the lady from BT Tech help who I spoke to this morning (and who had managed to sort out my BTID log-in problem, thankfully) had a look and suggested that maybe I needed an updated/new/different version of TB or 'another email'. Well, I'd really like to stay with Thunderbird and was hoping someone here could explain it in plain english for me, please? I was wondering what would happen, supposing I need to download an updated/different version, if I did that and then sort of re-installed my existing BT email addresses (just as if I was starting again with Thunderbird)? I do hope there is someone here who can help - please - I'm rather fond of that little blue bird. Thank you.

Just add the account again.
File|New|Existing Mail Account…
There should be no need to delete or reinstall anything. Re-installing Thunderbird itself is rarely useful, since doing this doesn't delete account data. Don't delete the old yahoo-based account until you're sure that everything you need to keep is in the new criticalpath-based account.
CriticalPath is the name of the business providing email services to bt.com.
Some not very reassuring reading [http://www.theregister.co.uk/2014/03/13/bt_likely_to_have_breached_data_protection_act_after_email_accounts_were_allegedly_compromised_over_http_and_details_kept_in_log_files/ here].
You'd think bt could run their own email service, wouldn't you? Yahoo was generally seen as a poor choice. I'm not sure that criticalpath is any better.

Could there be independent VI paths for different versions of LabVIEW?

Hello,
When jumping between different versions of LabVIEW (6.1, 7.1, 8.5) it is annoying that the current path for one becomes the current path for the other.
If I am working with LV 7.1 in a folder dedicated to 7.1 VI's, and then open LV 8.5, I don't want 8.5 to go to that 7.1 folder by default. Alternately. if I was working in LV 8.5, closed it out, and then I click on a 7.1 VI, I don't want it to open in LV 8.5.
I've tried changing the path options in each version of LabVIEW, but that doesn't seem to help. Is there any way of isolating these folder paths from one another? One of our newer LV guys accidently opened some 7.1 code in 8.5.1 and then saved it. Luckily, I had archived code to return to, but it could have been a disaster.
Thanks for any ideas,
McSynth

You're actually asking two different questions.
The first question has to do with which version of LabVIEW gets launched when you double-click a file. This is an operating system thing. The one that gets launched is the last one that got used. (Your first question will be: can this be changed? Answer: Change the operating system. Or, play around with the registry each time you quit out LabVIEW.)
The second question has to do with search paths. These are independent. However, a VI will contain information about its subVIs in terms of where to find them. This is not a function of LabVIEW, as it is a function of the VI. Thus, it will make no difference which version of LabVIEW you use to open the VI. You can, if you wish, modify the search paths that LabVIEW uses to find VIs for each version of LabVIEW from the Tools->Options menu. However, this will not eliminate the problem, and your best bet is to keep those backups frequent.

Objects panel in different versions of Fireworks

Similar Messages

Maybe you are looking for