Objects RecordWrapper and RecordSetWrapper not available

Hello,
after calling a SAP-function I receive an Object "MappedRecord" as result. The MappedRecord contains a set and while iterating the set I receive either "com.sapportals.connectors.SAPCFConnector.execution.structures.RecordWrapper" or a "com.sapportals.connectors.SAPCFConnector.execution.structures.RecordSetWrapper" as value. I do not know how to work with that Objects due to I didn't found any of them in the jar-files. Does anyone know where to find this classes? Or how to get the values correctly out of the MappedRecord by using a different way?
Thanks for any help!
Martina Dilger-Klett

Problem is fixed.
Use the interface IRecord instead of RecordWrapper or IRecordSet instead of RecordSetWrapper.

Similar Messages

Error in object definition, DOMA is not available

Hi Gurus,
While loading data from PSA to datatarget(0IC_C03), I am getting this error.
I have scheduled the dataloading and the job is getting cancelled....
The job log in sm37 looks like this:
Job started
Step 001 started (program RSNEW1, variant &0000000000004, user ID BWTRAINING)
Reconstruction / addition started for InfoCube 0IC_C03
Caller 36 data packet 000001
Reading data from PSA started
Caller 39 data packet 000001
29 records read from PSA 2LIS_03_BX_BA
Caller 52 data packet 000001
InfoCube 0IC_C03 will be updated
Caller 55 data packet 000001
Start of update-rule processing for InfoProvider 0IC_C03
Caller 59 data packet 000001
End of update-rule processing for InfoProvider 0IC_C03
Error in object definition, DOMA is not available
Job cancelled
I am working in BI7.0.
Please help me in solving the issue.
Vinod.

Check all number range objects related to that cube.

Health Service in which the location monitoring object is contained is not available

Hello,
When i am trying to discover new machines I am getting this error:
Health Service 'OPMGRRMS1.xxx.xxx.xxx.xxx' in which the location monitoring object is contained is not available
All services have been restarted successfully without error... on the RMS Server.
- System Center Data Access
- System Center Management
- System Center Management Configuration
- System Event Notification Service
but still having the error...
Date: 10/27/2009 10:14:00 AM
Application: System Center Operations Manager 2007 R2
Application Version: 6.1.7221.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.LocationMonitoringObjectNotAvailableException: Health Service 'OPMGRRMS1.ad.medctr.ucla.edu' in which the location monitoring object is contained is not available. Make sure that the computer hosting the Health Service is available and verify that the Health Service is running.
at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleSubmitTaskIndigoExceptions(Exception ex)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.AdministrationOperations.LaunchDiscovery(Guid batchId, List`1 jobDefinitions)
at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
DW works (Datawarehouse) I restarted the System Center Management successfully
MS works (2nd Management Server) I restarted the System Center Management successfully
ACS works (Audit Control Server) cannot access the reporting server but I restarted the System Center Management successfully
RMS DB 48 % Free
DW DB 18% Free
ACS DB 13% Free
I can ping the RMS Server what other test could I do?
I removed the new items:
Delete the six modules of Windows Failover Clustering Management Pack (SCOM Console > Administration > Management Packs > Right Click delete on it)
Uninstall System Center Operations Manager 2007 R2 Authoring Resource Kit (Add/Remove Programs)
Uninstall System Center Operations Manager 2007 R2 Authoring Console (Add/Remove Programs)
Reboot the RMS Server
SAME ERROR!!!
Any idea
Thanks,
Dom
Altiris Support / System Center Configuration Manager Support

Hi Marius,
In the Operations Manager Log I have some errors:
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:06 PM
Event ID: 4506
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Data was dropped due to too much outstanding data in rule "Microsoft.SQLServer.2008.LoginsPerSecCollection" running for instance "MSSQLSERVER" with id:"{24345584-0FD5-0FAB-2293-D4C82BEDB086}" in management group "SCOM-MED".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">4506</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:06.000Z" />
<EventRecordID>4126486</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>Microsoft.SQLServer.2008.LoginsPerSecCollection</Data>
<Data>MSSQLSERVER</Data>
<Data>{24345584-0FD5-0FAB-2293-D4C82BEDB086}</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126487</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectEntityHealthStateChange</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectEventData", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126488</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectEventData</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: HealthService
Date: 10/28/2009 10:15:50 PM
Event ID: 1107
Task Category: Health Service
Level: Error
Keywords: Classic
User: N/A
Computer: OPMGRRMS1.ad.medctr.ucla.edu
Description:
Account for RunAs profile in workflow "Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData", running for instance "OPMGRRMS1.ad.medctr.ucla.edu" with id:"{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}" is not defined. Workflow will not be loaded. Please associate an account with the profile. Management group "SCOM-MED"
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="HealthService" />
<EventID Qualifiers="49152">1107</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-10-29T05:15:50.000Z" />
<EventRecordID>4126489</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>OPMGRRMS1.ad.medctr.ucla.edu</Computer>
<Security />
</System>
<EventData>
<Data>SCOM-MED</Data>
<Data>{DF927679-EAC0-B8EC-F8CC-F0031A36AD4F}</Data>
<Data>OPMGRRMS1.ad.medctr.ucla.edu</Data>
<Data>Microsoft.SystemCenter.DataWarehouse.CollectPerformanceData</Data>
</EventData>
</Event>
these errors are recurrent...
the RMS is doing yoyo between Green as healthy and grayed out under Monitoring > Windows Computers or Administration > Device Management > Management Servers (2-3 minutes green then grayed out) there is no event in the Windows Event Log as System Center Management service remains running...
This MP for the Data Warehouse Internal Library has been removed and restored two weeks agao with Premier Support as the RMS was already fleaky and doing gray-green...
I have tried again but I will need to check again as it seems these errors are pointing to the Data Warehouse Library and not only the Data Warehouse Internal Library Management Pack. The main problem with this is that the Data Warehouse Library is [b]94[/b] Management Packs which depends on this Data Warehouse Library in our environment so if I need to remove this one it is almost a complete reinstallation of 50% of our MPs :(
Heartbeat failures: The Heartbeat State view ( Health Service Watcher (Agent) - All) is giving me 10 Critical and 1 Warning
[b]Any way to delete All MPs and restore them at once?[/b]
I have an issue trying deleting "Notifications Internal Library":
The User does not have sufficient permissions to perform the operation"
I am using my own account which is supposed to have all accesses.
I tried the hotfix 938510 but it does not seem to apply to SCOM R2
Thanks
Dom
Altiris Support / System Center Configuration Manager Support

Could not load an object because it is not available on this machine

Have been trying to use the BI Publisher Add-in in Word 2010 on Windows 7 64 bit. The problem is that BI Publisher appears as an Add-in but when I try to log in a lot of error message appers " Could not load an object because it is not available on this machine". The next error is ' The macro cannot be found or has been disabled because of your Macro settings'.
I have followed others on this forum with a similar issue and it appears that there may not be a solution. My macro settings are set to allow all. I tried removing and renaming the EXD files and still doesnt work.
On the same machine I have installed add-ons of Publisher 11g, this could be a problem???
Help meeeee.

Hi
I would check out other posting - Getting BI Publisher to work after down grade from Word 2010 to Word 2007
The problem is cached EXD files.
1. Close Word
2. Do a search on C drive *.EXD (include hidden files)
3. Rename them to .BAK
4. Go back into word and you should be able to Load Data
Removing/renaming the EXD files in the following folders resolved the issue for me.
C:\Documents and Settings\[user]\Application Data\Microsoft\Forms
C:\Documents and Settings\[user]\Local Settings\Temp\Excel8.0
C:\Documents and Settings\[user]\Local Settings\Temp\VBE
C:\Documents and Settings\[user]\Local Settings\Temp\Word8.0

On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.

On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

How can I log onto iCloud from my iPad when the option is in grey and therefore not available

How can I log onto iCloud from my iPad when the option is in grey and therefore not available. I deleted my account as it was showing up with an old Id ( I'd changed my email) but now I've done that it won't give me the option of logging back on. Do I have to do this on another device Or computer linked to iTunes first?
THanks

Hi Kate, have you perchance enabled restrictions on your device. (Settings > General > Restrictions)

When my Nano is connected to my computer, it shows that I have music downloaded to it, but when i touch the screen to play the music, it is not showing up and is not available to play. I've tried reloading it with no success

When my Nano is connected to my computer, it shows that I have music downloaded to it, but when i touch the screen to play the music, it is not showing up and is not available to play. I've tried reloading it with no success

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday

Just erased my disk, whent to install Maverick and get : "Not available now" message since yesterday. Can someone help me revive my dead IMac!!

If you are selling or giving away the computer then follow these instructions:
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must
           be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be sure
              to opt for that.
          Destination means a freshly erased external backup drive. Source means the internal startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See What to do with iCloud before selling your computer.
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible
                    because it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list.
              Click on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

HT5958 Existing projects will not update and are not available for Final Cut Pro 10.1.1?

I have updated to Final Cut 10.1.1 but existing projects from previous version will not update and are not available. Have tried to re-install Final Cut as well as bring the projects to another computer which has the update, but they still will not update. Has anyone else encountered this problem and is there anyone who can assist?

In the Finder take a look at the path where your old projects and events are stored. They should be in Final Cut Projects and Final Cut Events folders respectively. Those folders need to be in Users/user/Movies on the boot drive and/or at the root level of other drives for FCPX to see them.
If that's indeed the case, then you should be able to get them updated ny using the Update Projects and Events command form the File menu and then clicking on Locate.
Russ

Spy menu only showing some items and properties not available

I am having some issues with the spy menu. In order to try and fix my issues I built the menu from scratch again on one of my pages. Everything works now on that page and when I upload it to the server, it is all there.
However, when I then copy and paste the menu to all the other pages and upload the the server, the submenu doen't show anymore. When I go and troubleshoot it and highlight the menu in its entirety and click properties, no properties will show. On the working page, this ation delievers me a properties bar where I can + or - menu items. Why is this? As this must be why the submenu is not showing either?
The page where everything works is this (See sub menu under coaching clinics) http://www.golifecoaching.com.au/go-beyond-registration-test but on every other page on this website, this submenu disappears.
Can anyone help? I am tearing my hair out and don't fancy having to build the menu from scratch for every page. There has to be a better way.
I use CS4 and this is my menu;
   <div id="navigation">
    
    <ul id="MenuBar2" class="MenuBarHorizontal">
      <li><a href="index.html">Home</a>        </li>
      <li><a href="what-is-coaching.html">What is Coaching</a></li>
      <li><a href="coaching-benefits.html">Coaching Benefits</a>        </li>
      <li><a href="do-you-need-a-life-coach.html">Do You Need a Life Coach</a></li>
      <li><a href="about-go-life-coaching.html">About Go Life Coaching</a></li>
      <li><a href="#" class="MenuBarItemSubmenu">Coaching Clinics</a>
        <ul>
          <li><a href="holdsworth.html">Coaching for Carers</a></li>
          <li><a href="coachingclinic.html">The Coaching Clinic</a></li>
        </ul>
      </li>
      <li><a href="contact-us.html">Contact Us</a></li>
      <li><a href="http://www.golifecoaching.com.au/blog">Blog</a></li>
    </ul>
        
Jen

That is brilliant, that is exactly it! Thank you sooooo much for your suggestion. I am so relieved.
Yes a template would be best, but I am not sure how to do that, so I am left with doubling my work evertime I make a change on this site.
Thanks Jen
Date: Sat, 13 Aug 2011 16:43:59 -0600
From: [email protected]
To: [email protected]
Subject: Spy menu only showing some items and properties not available
Disclaimer: I am new to coding in general and this is my first attempt to help someone.
I think the properties bar with the + - has to do with the javascript coding that is generated when you create a new tag, and it is located near the bottom of the page just before the closing body tag.
looks something like this:
<script type="text/javascript">
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", );
</script>
so dont forget to copy that over too. Also, check the CSS that is associated within each page and make sure they are all in the same style.
P.S. Have you considered using a template for the menu bar so you dont have to copy it over each time?
>

HT201272 Hi there, I recently purchased an app and I need to re download it onto my iphone 4s. The app is saved on my laptop and is not available on my app store download history. Can anyone advice how I can redownload it from my laptop?

Hi there, I recently purchased an app and I need to re download it onto my iphone 4s. The app is saved on my laptop and is not available on my app store download history. Can anyone advice how I can redownload it from my laptop?

You just resync your iPhone with iTunes on your laptop.
If you are logged with the same Apple ID on both devices it should be available to download from your phone:
Open App Store app > Updates > Purchased

Web Dynpro application callable object error: Page Builder Not available

Hi, SDN Fellow.
I created a callable object of Web Dynpro application. The callable object is atatched to an Action, and Action --> Block, and Block --> Process.
I initiate the process in GP Runtime, when it comes to the Action screen the Web Dynpro application atatched to, I got the following error:
The page builder required to display this application UI inside the portal environment is not available.
As aa comparison, another callable object that atatched to a Web Dynpro component (that implement GP interface) is working fine.
Please advise.
Thanks in advance,
KC

Hi KC,
When you start your process from GP Runtime, does the actual action/callable object open in a new window?
Have a look at this SAP Note:
[Error when executing a GP task - Page builder|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_gp/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393831353137%7d]
Although the error message you are getting is different, but if your callable object opens in a new window, then the problem (in most probability) is the same as mentioned in the SAP Note.
Also, try testing the Web Dynpro callable object in standalone mode. For more information on this, see:
[Testing Callable Objects|http://help.sap.com/saphelp_nw04s/helpdata/en/4c/588041a17e060de10000000a1550b0/frameset.htm]
Bye
Ankur

Catalogs, code groups and codes not available in service order in Web UI

Hi,
I have created and maintained a subject profile for the service orders that i am using for my business scenarios. The same is visible under the objects tab in transaction data of the service order business transaction in the SAP GUI.
However the same are not visible anywhere in the Web UI (they are not available in the list of available fields as well in BSP_WD_CMPWB for BT116H_SRVO).
Can some1 pls advice me with the steps so as to make the catalogs, code groups and codes in my service orders available in the Web UI screen as well.
Will really appreciate if detailed steps are provided since I am new to Web UI technology.
Warm regards,
DP

Deepak,
I'm 99% sure (although dont quote me as I dont have a developer key so I cant finish my testing) that you're missing the context Nodes - so although you have the assignment block yuo have no link between the code set and the service order header. You havent referenced them in your comments on this post in any case.
Try this:
Go into BSP_WD_CMPWB
In the Browser component Structure open folder Component > Views
Double-click BT116H_SRVO/DetailsOV and in the structure expand to BT116H_SRVO/DetailsOV > BT116H_SRVO/DetailsOV > View Controller > DetailsOV.do > Context
Right-click on folder Context Node and click Create
Follow through the wizard defining a Z context Node (e.g. ZBTSubject) and a Model Node of BOL Entity BTSubject
Define any Dependencies etc you may wish to have and so on (most of the wizard is optional)
Repeat the same for the BOL Entity BTSubjectSet
Now go back in and see if your values are populating. I'm not a developer (and never have been), so I cant guarantee this will work as I dont have a developer key to test this, but I am quite sure that this needs to be done for you to get your values populating.
Good luck, Merry Christmas and a Happy New Year (& please award points if useful!)
Andrew Griffin.

Auth Objects for Class - PP not available on PFCG

Hi,
We have upgraded the syetem from GTS3.0 to GTS8.0. The scenario is -- although a TCode for the PP Class ( e.g CC11 or CC12 ) has been maintained in SU24, the corresponding check maintained authorization objects are not available within PFCG. I even tried to create a dummy role and add only trx: CC11, only the S_TCode got updated.....whereas the check maintained objects like C_AENR_BGR, C_AENR_ERW & C_AENR_RV1 were not available.
But if I add trx from any other class like SU53 or WE21 within the same dummy role, the corresponding check maintained authorization objects get updated within the role.
Any help regarding this to fix the issue is highly appreciated.
Regards,
Dipesh

Looks like someone toasted your proposals from a lower release or even in a DB table copy.
I would look into this and track the cause down, to stop it.
Take a look in the menus of SU24 for change documents. (USOB*CD tables).
Cheers,
Julius

Analyze and fix not available in project timeline, fcpx

When I imported media into my event, I did not select Analyze and Fix but now want to use this function. Analyze and Fix is available when I have a clip selected the events library, but Analyze and Fix is grayed out and not available when I select a clip in my project timeline. According to a lynda.com tutorial, this feature should be available in the timeline. Does anyone know why or am I doing something wrong? Thanks.

Hmm...looks like my shots didn't come through. Let me try again using Insert Image.

Objects RecordWrapper and RecordSetWrapper not available

Similar Messages

Maybe you are looking for