Objects to show at different times on a slide not showing up

Hi Everyone,
I hope this problem is minor and that I’m just missing a small step but here it goes…
I’m using Captivate 4 and I’ve only been using it on one particular computer. I updated a captivate project that I’ve been working on since September and I’ve finished all the edits (added a picture, changed a few words) as requested by colleauges when all of a sudden, some objects that were suppose to show at different times on the slide were not showing up at all. The frustrating part is I actually finished the project! When I do a preview within the edit view, the objects appear as it should, however, when I publish it or do a preview on wepage, the objects are not appearing at all (ie a word at 10 sec, another at 20 sec). Anway, there were only 3 slides acting like this, all with objects are suppose to show up at different times on the slide (these were not the slides that I recently edited). My video works fine, my quiz works fine, and I’ve uploaded an initial version of my work on a Pathlore LMS with no problems (publish specs: flash 8, AS2).
I have several other projects that are less complicated (ie no video, no objects showing at different times within the slide) and they are OK. I’ve checked on other computers and same problem.
I tried deleting the slides, and redoing it again within the same project but still wont work I tried copying everthing on a new project with the same size with no luck.
I tried making a 2 slide project with objects showing up at different times and it works.
Is my project corrupted in some way? What are the possible culprits for this problem?
I really hope I don’t have to start from scratch…
Thanks in advance!

Hi there
While it's certainly possible that the project has somehow become corrupt, you might find that simply closing and restarting Captivate changes things.
Have you tried that? I've seen it where bits and pieces are suddenly missing. After I restarted, things were just fine again.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Similar Messages

My Hotmail watcher has stopped working for the past week or so. I've uninstalled and reinstalled it several different times, but it did not help

My Hotmail watcher has stopped working for the past week or so. I've uninstalled and reinstalled it several different times, but it did not help

Hi,
It appears that the developer has released a newer version of Hotmail Watcher. Version 2.13 located at https://sites.google.com/site/sonthakit/hotmailwatcher. You should try updating it to see if it works then.
From https://addons.mozilla.org/en-us/firefox/addon/hotmail-watcher/<br>
'''IMPORTANT -- I had changed my add-on to self-host. New version had been released at my site. Please install new version'''

Why did the iTunes update screw up the already installed iTunes on my computer? I can't sync my iPod to my computer because it now says iTunes was installed incorrectly. Re-install iTunes. I've tried to install it 3 different times. It's NOT working.

I had attempted to update my iTunes so I could go ahead and clear out some of my songs on my iPod that I no longer care to listen to at the moment. When I finished updating and attempted to open iTunes, I was given an error
These are the two error messages. I've tried uninstalling and re-installing several times. Still receiving the same errors.... Help.

Hi carmekino,
Try using the following article to help you uninstall iTunes and its related components, keeping in mind that these components need to be uninstalled in this specific order:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If this does not resolve your issue, this article provides some further troubleshooting steps:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

How do I set up a standard letter to sned to many people at different times??

Hi
Are you referring to email?
I don't believe you can send an email to different people at different times automatically, at least not with Yahoo Mail by itself.
You can compose multiple emails and leave them as drafts until they're ready to send if that's possible for you to do.
When sending an email to multiple people, you need to use the "CC/BCC" option of the "To" line to indicate that you're sending it to more than one person. Add each email to either the "CC" or "BBC" line. "CC" lets each recipient see who else received the email. "BBC" doesn't let the recipients see each other.

Hello,
Unfortunately this is not a Firefox issue and so we cannot help you out with this. Please contact your blog provider for more assistance.
Thanks!

Different times showing for an event

I received in invite from someone who is one hour behind me. He sent me a test invite ("Fake 2") for 10am my time, which is 9am his time.
In the Calender, the time is shown correctly, but when I click on it, it shows his time zone. Why is that? Why won't it show the time of the meeting in my time zone? Note that on my iPad, I see 10am in both cases.
This looks like this has something to do with the "Turn on time zone support" preference. However, I'd like to be able to use that function to change times if I want to set my Calendar to different time zones I'm visiting but see the actual time of the event in my time zone when I click it. If not, it can be a bit confusing to see two sets of times.
What am I missing?
Thanks,
Tony

Dispatching event from any component by either by using this or simply without this
can not be listen by each and every componet of the application,depends upon where you have write addListner. Check Event life cycle
in the flex. While if you are using the system manager for dispatching the event and
also for listenting the event so in that case you will always listen the event.
You can visit this link for making it simple to use and understand.By this way you can always listen your event
inside any component in your application.
http://shardulbartwal.wordpress.com/2009/04/15/managing-custom-events-in-flex-30-in-a-easy -way/
Hope it will help you.
with Regards,
Shardul Singh Bartwal

Why do my MacAir and iPhone show different times?

I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
Any idea how I can get them in synch with each other?
Many thanks!
James

I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
Any idea how I can get them in synch with each other?
Many thanks!
James

Events booked on icloud show up at different times on iphone calander?

The times I book in events on iphone change when I bring them up on icloud.. or if booked in on icloud show up in a different time on iphone. usually a few hours different but sometimes around day either side of when the event was actually booked for... can this be fixed?
Thanks in advance
Nick Parkin

Welcome to the Apple Community.
Check that the time zone is set correctly on each device.

Alert Log time showing a different time

Hi,
Our Oracle 10g database is hosted on HP-UX B.11.31 U ia64 server. Recently after Rebooting the server
we noticed the time in the alert.log and the time in the server is entirely different.
when we queried the date in the database and in the server it shows the same time, but the alert.log is giving
the different time.
Whether anyone experienced this sort of problem and plz share how you rectified it

"When you query the time from database say select sysdate from dual, it is taken from system time"
It is a bit more complicated.
When you use the BEQueath protocol, the time is taken from the system clock, modified by the TZ variable for your session.
When you connect using the listener, the time is taken from the listener, modified by the TZ variable for the listener session.
When you are on RAC, the listener inherits the time from the global services daemon, modified by the TZ variable for the global services daemon.
I had to investigate this, as Oracle 9i doesn't understand the M3.5-M10:4 syntax I need to make sure the summertime switches on the Europan moment.
Regards,
Sybrand Bakker
Senior Oracle DBA

Droid X showing 3 different times at once

Droid x displays 3 different times simultaneously. At this moment the lock screen show 9:23 pm the digital clock widget on my home page shows 10:25 pm and the small clock in upper right show 10:21
I've tried rebooting both with and without auto update turned on
It is unpredictable when my alarm will go off and I have lots of times too choose from to get someplace on time...
Should mention that this past weekend (during DST) I traveled from MA to NS Canada. But have traveled to Nova Scotia many times without having this issue.
how do I fix?
Wayne

Oh no, WayneL! That's not good.
I would like to help.
Just as bearone21 mentioned, this can be application related as well as location related. What zip code are you located in? Have you downloaded any particular Clock widgets? If so, remove the widget and see if the time shows correct. Also, let me suggest you power off the device and remove the battery for approximately 30-60 seconds, then once powered back on reprogram by dialing *228 and select Option 1. Once reprogrammed, see if the time displays correctly.
Let me know the results of your testing so I see if we need to further troubleshoot.
Thanks,
AnthonyTa_VZW
VZW Support
Follow us on Twitter @VZWSupport

Console Access to CPO Server in a different time zone: Verifying Security

Hello,
I noticed this on multiple instances, when CPO console in one timezone (example: CST) tries to access a CPO Server in a totally different timezone, the console is not able to login to the CPO Server and I see this error message:
"An error occurred when verifying security for the message"
Is there any known issue with console accessing the CPO server and some handshake happening?
From the logs:
@@Logging from process Tidal.Automation.Console.Loader.exe(id=13248)
||8|2013/03/06 19:20:00.365|13736||||Could not get server ID for assembly store connection:
||9|2013/03/06 19:20:00.366|13736||||EXCEPTION (System.ServiceModel.Security.MessageSecurityException): An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail.
Stack Trace:
Server stack trace:
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
   at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId()
   at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles()
||10|2013/03/06 19:20:00.366|13736||||   INNER EXCEPTION (System.ServiceModel.FaultException): An error occurred when verifying security for the message.
Stack Trace:
||11|2013/03/06 19:20:37.696|13736||||Could not get server ID for assembly store connection:
||12|2013/03/06 19:20:37.696|13736||||EXCEPTION (System.ServiceModel.Security.MessageSecurityException): An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail.
Stack Trace:
Server stack trace:
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
   at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId()
   at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles()
||13|2013/03/06 19:20:37.696|13736||||   INNER EXCEPTION (System.ServiceModel.FaultException): An error occurred when verifying security for the message.
Stack Trace:

More important than whether their timezones differ is whether their *times* differ.
12:00 in EST = 9:00 in PST as far as everyone (including Windows) is concerned.
If both are showing 12:00 then time sync is the problem, and this would cause authentication handshake issues. NT authentication only allows something like 10 minutes of clock skew. My example here has 180 minutes of clock skew.

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

How to create an event in two different time zones?

Hello,
I am traveling a lot and I would like to be able to enter the flight details in iCal - whether on my iPhone, iCloud, i... whatever. The problem is that I cannot manage to enter these details without calculating the time difference. Example:
I am flying on Saturday from Frankfurt to Japan. My flight takes off at 19:00h local German time and arrives in Tokyo at 13:00h local time (in Japan)
I can either specify the time zone for Germany or for Tokyo, but is there a way to enter the event from 19:00h German time to 13:00h Tokyo time?
Thank you very much for your time.
Larry

Hi Alex,
this applies only when the event takes place in one time zone, but in my case I start the event on one time zone and ends in a different time zone. As it is known, the airlines show always the local times on the ticket. Which means that I start my travel at 19:00h German time (UTC +2) and end it at 13:00h Tokyo time (UTC +9). When I create the event I can choose From Date/Time... To Date/Time and below I have Time zone. Ideally I should have two time zones, one for the start and another for the end.
Since this situation only applies to travelling (I can't think of another case right now), I believe that Apple didn't take this into consideration.
Any other thoughts/ideas? Other than manually calculating the difference, of course.

Two objects created at the same time with the same hashcode

We have this object with the following constructor:
2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(3)(pid:24312)] INFO com.intel.swiss.sws.netstar.application.caching.framework.data
set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
/d81], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0
2010-06-24 00:10:31,260 [LoadBalancerClientSubscriber(5)(pid:24315)] INFO com.intel.swiss.sws.netstar.application.caching.framework.data
set.synchronizer.DatasetSynchronizer - Initializing dataset synchronizer for: [/nfs/iil/iec/sws/work/damar/ds_cama/tmp/ds_126631277304794
/d31], i am com.intel.swiss.sws.netstar.application.caching.framework.dataset.synchronizer.DatasetSynchronizer@2ed3cae0Note that two objects are created by different threads with exactly the same hash code. Any idea if/how this is possible?

isocdev_mb wrote:
The last part definitely suggests already that relying on uniqueness is incorrect. Hash codes are very often equal on distinct objects, viz. new String("java").hashCode == new String("java").hashCode(). Use a class level counter as suggested earlier.For that case we would of course expect the hashCodes to be equal, since the objects are equal. But even in the case of non-equal objects that don't override hashCode, you can still get the same value. Or, for that matter, non-equal objects that do override it. There are 2^32 possible hashCode values. There are 2^64 possible Long values. That means that there are 2^32 Longs that have a hashCode of 1, 2^32 Longs that have a hashCode of 2, etc.
And for non-equal objects...
package scratch;
import java.util.Set;
import java.util.Map;
import java.util.HashMap;
public class HashCodeIsNotUnique {
public static void main(String[] args) throws Exception {
    Map<Integer, Integer> hashCodeCounts = new HashMap<Integer, Integer>();
    int numObjects = 10000;
    for (int i = 0; i < numObjects; i++) {
      Object obj = new Object();
      int hashCode = obj.hashCode();
      if (!hashCodeCounts.containsKey(hashCode)) {
        hashCodeCounts.put(hashCode, 0);
      hashCodeCounts.put(hashCode, hashCodeCounts.get(hashCode) + 1);
    for (Map.Entry<Integer, Integer> entry : hashCodeCounts.entrySet()) {
      int key = entry.getKey();
      int value = entry.getValue();
      if (value > 1) {
        System.out.println(key + " occurred " + value + " times");
9578500 occurred 2 times
14850080 occurred 2 times

In iOS 4, you could make separate photo slide shows with separate songs. In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show. Is there any way to fix this? This is something I

In iOS 4, you could make separate photo slide shows with separate songs.
In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
Is there any way to fix this? This is something I use every day.
I am on an iPad 2, 32gb, wifi...
Thank you

My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

How do i create a new event in a different time zone in iCal ios7?

New update seems to have made this disappear in iphone.
I'm also looking for same solution on MacBook Pro
THanks
j

Several settings in Settings > Mail, Contacts, Calendars affect Calendar and your calendar accounts. These include:
Syncing of past events (future events are always synced)
Alert tone played for new meeting invitations
Default calendar for new events
Default time for alerts
Calendar time zone support, to show dates and times using a different time zone
Which day starts the week

Objects to show at different times on a slide not showing up

Similar Messages

Maybe you are looking for