ObjectTAG with JDK1.3.1_01

Hi,
I have an urgent problem with the object tag and the <b>jdk1.3.1_01</b>.
I've used the html converter to transform the applet TAG to the object TAG with the 1.3.1_01 SDK.
There is allready the JRE 1.3.1_01 installed on the PC, but everytime I access the html-page, the download-dialog opens and wants to load the jdk from SUN.
Due to our customers we have to use only the allready installed jdk version. On the destination pc there will be no internet connection available.
Can anybody please help me, how I can solve this problem?
Greetings Tim
<OBJECT classid="clsid:CAFEEFAC-0013-0001-0000-ABCDEFFEDCBA"
WIDTH = "400" HEIGHT = "300" NAME = "objRefGrid" codebase="http://java.sun.com/products/plugin/1.3.1/jinstall-131-win32.cab#Version=1,3,1,0">
<PARAM NAME = CODE VALUE = "com.tsystems.ezn.kubenetz.presentation.servlets.listener.Applet1" >
<PARAM NAME = CODEBASE VALUE = "/kubenetz" >
<PARAM NAME = ARCHIVE VALUE = "applets.jar" >
<PARAM NAME = NAME VALUE = "objRefGrid" >
<PARAM NAME="type" VALUE="application/x-java-applet;jpi-version=1.3.1">
<PARAM NAME="scriptable" VALUE="false">
<COMMENT>
<EMBED type="application/x-java-applet;jpi-version=1.3.1" CODE = "com.tsystems.ezn.kubenetz.presentation.servlets.listener.Applet1" CODEBASE = "/kubenetz" ARCHIVE = "applets.jar" NAME = "objRefGrid" WIDTH = "400" HEIGHT = "300" scriptable=false pluginspage="http://java.sun.com/products/plugin/1.3.1/plugin-install.html"><NOEMBED>
</NOEMBED>
</EMBED>
</COMMENT>
</OBJECT>

Sir g would u plz, tell me:
This download work fine.... I mean have u installed plugin through this tag?
As i have tried this and a few others i.e 1.4 ,1.3.0.1, ... but none of them downloaded completely in the end give error.
"The file is corrupt try to download again ......"
One moere thing i am trying it on IE 5 , IE 6.
Waiting for your response....
Ahmad Jamal.

Similar Messages

Compiled with jdk1.3.1_01 and run under VM 2.0

I have compilied all my source code with jdk1.3.1_01 and ias6.0 sp3 uses jdk1.2.2 or 2.0VM....is this difference going to affect my application?

Hi,
It depends upon how your application is coded. If you use some of
the functionalities which JDK 1.2 uses and incase JDK 1.3 doesn't likes
that, you are likely to get errors. Infact, iAS encourages you to use
the JVM which is bundled along with iAS SP3 and using JDK apart from
that troubles. Please refer to my previous posting on iAS SP3 & JDK 1.3,
I've tested them, which threw lots of errors. Hope this helps.
Regards
Raj
Mansoor Quraishi wrote:
I have compilied all my source code with jdk1.3.1_01 and ias6.0 sp3
uses jdk1.2.2 or 2.0VM....is this difference going to affect my
application?
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

What is official stand on WL51 and jdk1.3.1_01 ?

I went to the WL platform certification detail page and I see that WL51 is
only certified on Windows NT with jdk1.3.0
However, from past experience we have found that this is not always the most
updated page. Also, I dug into past posts (this question had come up before)
and did not find any official word on this. Can someone from weblogic
confirm if we can use weblogic with jdk1.3.1_01 on winnt?
Thanks.

I believe I have fixed it. I have uninstalled all the Java applications (JDK, Forte for Java, Poseidon UML, ...), rebooted and then removed all directories left behind in C:\ and in C:\Program Files.
I also searched and removed all Obvious registry keys (looked for jdk and java). I found a couple of registry keys that indicated the "active" version. I changed those from 1.3 to 1.3.1.
I then re-installed all the packages and everything seems to be working Ok.
Greetings!

Classes not found when compiling for jdk1.3.1_01 on red hat 7.2

I have just installed jdk1.3.1_01 (rpm) on linux red hat 7.2
I have written a small program to test, however, the compiler isn't able to locate the classes.
import javax.swing.*;
public class JTest {
public static void main( String args[] )
JOptionPane.showMessageDialog( null, "Hello", "Test Dialog",
JOptionPane.INFORMATION_MESSAGE );
System.exit( 0 );
When compiled it generates the error:
JTest.java:10: error:Variable "JOptionPane" is not defined in current context
I have the path and classpath set to what I think are the correct directory paths.
Any advice would be much appreciated!
Thanks..

Sorry, typo in the classpath... but now when I compile
I get error: "segmentation fault" then nothing else.
This also happens when I execute a precompiled app (eg
"java OldApp").This is to do with GLIBC-2.2, I believe. :/ (Pointed out by Niteen. :)
"ulimit -s 2048" should fix this. Adding this line to /etc/profile or your ~/.profile shall automatically run this command every log in.
Bhav

Configuring the PATH for jdk1.3.1_01 in WindowsXP

I need help in configuring the autoexec.bat file for jdk1.3.1_01 . I am running on WindowsXP. (I used to have win 98 on my old pc that crashed and had jdk1.2.1 and working just fine) Now I have a new pc and have tried the following:
windir=C:\WINDOWS
SET winbootdir=C:\WINDOWS
SET COMSPEC=C:\WINDOWS\COMMAND.COM
SET PATH=C:\WINDOWS;C:\WINDOWS\COMMAND;C:\jdk1.3.1_01\bin
SET PROMPT=$p$g
SET TEMP=C:\WINDOWS\TEMP
SET TMP=C:\WINDOWS\TEMP
When I type in C:\path ...it does not show the path I entered. I have no clue what I am doing and the instructions I printed out from sun just do not help me out at all. I really need to get this working so I can continue learning. If anyone can please straighten me out on this I would really appreciate it. Feel free to email me at [email protected]
Thanks Reba

Your PATH appears to be correct. However, to verify your PATH you should be able to type the following:
c:\>echo %PATH%
This will display your PATH setting on the console. In addition, you can verify that your PATH setting is correct by typing:
c:\>java -version
If your path is set correctly, you should see something like:
java version "1.3.0"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.0-C)
Java HotSpot(TM) Client VM (build 1.3.0-C, mixed mode)
If, instead, you get something like:
"Bad command or file name"
Then your PATH is not configured correctly.
Hope this helps.

Weblogic 10.0 Comatability with JDK1.6

I have installed weblogic 10.0 on unix machine. And when i istalled it JDK1.5 will automatically installed with it inside weblogic folder.
And when i create a new instance of weblogic with existing JDK1.5 the instace will start properly and application executes also.
But when i point the weblogic to JDK1.6 at the time of instace creting. it will not work properly. When i stop the server below error is display.
javax.naming.CommunicationException [Root exception is java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.io.StreamCorruptedException: invalid type code: 88]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:74)
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:32)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:773)
org.python.pycode._pyx18.f$0(/newpluto/weblogic10/bea/citiSchedPayliteDomain/vb2java/shutdown.py:1)
at org.python.pycode._pyx18.call_function(/newpluto/weblogic10/bea/citiSchedPayliteDomain/vb2java/shutdown.py)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyCode.call(PyCode.java:14)
at org.python.core.Py.runCode(Py.java:1135)
at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
at weblogic.management.scripting.WLST.main(WLST.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.io.StreamCorruptedException: invalid type code: 88
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:222)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:224)
at weblogic.common.internal.RMIBootServiceImpl_1002_WLStub.authenticate(Unknown Source)
at weblogic.security.acl.internal.Security$1.run(Security.java:185)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.acl.internal.Security.authenticate(Security.java:181)
My question is that Weblogic 10.0 is only comapatable with jdk1.5 only or either any way so we can point it to JDK1.6

WLS 10.0 is not supported for JDK 6.
This is strict violation that you need to use only JDK 5

JTable selection problem with jdk1.5.0_05

Today I tried the new jdk1.5.0_05 release and noticed with a JTable I can only select a single column and row with the mouse. With jdk1.5.0_05 I could select multiple cols and rows with the mouse. I looking at the listselectionmodel for the jtable i see it is set to mulitple. Is this a bug in the new java 1.5 release?

Yeah, the .jar files are definitely there and the
small class I just wrote is in the Classes directory.Yes, but you're calling javac.exe, not some jars. Did you check that javac.exe is there? Stupid question, yes, but I've seen it all...
I changed the path in Control Panel -> System ->
Advanced -> Environment Variables. I've also beendoing this is the command prompt:
set
CLASSPATH=%CLASSPATH%;C:\Java\jdk1.5.0\bin;C:\Java\Cla
ssesNo need to add the /bin directory to the classpath, there are no classes in it...

Java webdynpro development with jdk1.5.7

hi,
I have installed the CE server and the Netweaver Developer Studio, to try some java developments.
I was working with jdk1.5.7, but the server has only version 1.5.017.
Is it possible to upgrade the java in the server, so it can work with the current jdk version?
thx,
Erik

hi again,
I could solve the problem:
in the developer studio you can chose to compile for lower versions.
To do so, go to windows>preferences>java-->compiler and chose compliance level 5 or 1.4(it was on 6), and now the development works fine.

Signed applet with jdk1.4.2

Hello, friends! I'm having difficulties running an applet with jdk1.4.2. This applet was working properly with the previous version, jdk1.4.1. Perhaps I've forgotten some details or some changes in the new version. Any idea?
Thank you.

Hi there,
I am also facing similar problem. Please read the following.
I have a query regarding JRE 1.4.2_03. What does it have, which makes it differ from JRE 1.4.1_02 ? Actually, I am asking this question, because I have a signed JApplet where, user's select a file displayed in client JApplet's JTable and stores it to the specified location on his/her local drive. The JApplet runs perfectly well running in IE 6.0 with JRE 1.4.1_02. But, gives error on IE 6.0 with JRE 1.4.2_03.
Any help regarding the same will be helpful...
I tried a Signed applet with no GUI in it which runs well on JRE 1.4.2_03.
Both the applets are signed with jdk1.1.6.
Thanking you in advance,
Ganesh A Baviskar.

Weblogic 5.1 SP8 with JDK1.3 installed as an NT Service Fails

I've just completed the installation of sp8 of Weblogic Server. I used wlconfig to set the environment parameters as outlined in the sp8_readme.html file. I have Weblogic Server installed as a NT Service. When I start the service with Weblogic configured to use JDK1.2 it works just fine. However, when I switch Weblogic to use the JDK1.3, using wlconfig, I receive an Application error stating:"The instruction at "0x04e4d0d6" referenced memory at "0x00000000". The memory could not be written."If I start the WEblogic Server from the command line and configure the environment to use the JDK1.3, everything works fine. It's only when you are trying to run the Weblogic server as an NT Service.Any suggestions?

I don't think this problem was specific at all to SP8 - I ran into
this with an earlier version of the fixpack and just decided to run it
from the startweblogic.cmd file, instead. I never did try to set the
compiler to none as you did. BTW - it wasn't just as a service that
this problem existed for me - it also happened if you used the program
shortcut to start the server - i.e. any way you started it that used
those registry settings would experience the problem.
How has the stability been under 1.3 - have you seen any problems with
that? I was running with 1.3 and the Sun Server Hotspot VM and the
server kept crashing after just a few pages being displayed from my
site. This problem could have also been the -noclassgc switch though
since with that switch I was still seeing the problem under 1.2 - just
not as fast.
On Tue, 23 Jan 2001 09:49:05 -0800, "Christopher A. Mathrusse"
<[email protected]> wrote:
Seeing as no one has come up with a solution for me, I thought I would at
least post the fix. If you use JDK1.3 with WLS and are running the server as
an NT Service, you will need to set your JAVA_HOME value to the JDK1.3 using
wlconfig, and then set your java.compiler=NONE using
wlconfig -Djava.copiler=NONE. After completing these changes, WLS will run
as a service with JDK1.3.
"Christopher Mathrusse" <[email protected]> wrote in
message news:[email protected]...
I've just completed the installation of sp8 of Weblogic Server. I usedwlconfig to set the environment parameters as outlined in the
sp8_readme.html file. I have Weblogic Server installed as a NT Service. When
I start the service with Weblogic configured to use JDK1.2 it works just
fine. However, when I switch Weblogic to use the JDK1.3, using wlconfig, I
receive an Application error stating:"The instruction at "0x04e4d0d6"
referenced memory at "0x00000000". The memory could not be written."If I
start the WEblogic Server from the command line and configure the
environment to use the JDK1.3, everything works fine. It's only when you are
trying to run the Weblogic server as an NT Service.Any suggestions?

XSQL with jdk1.2.2 - javai.dll error

I successfully used the xsqlCommandLine utility with jdk1.1.7. When I try with jdk1.2.2, I get an error that javai.dll is not in the path. If I put javai.dll from the 1.1.7/jre/bin in my path, the xsqlCommandLine process runs without end, as if windows (NT) is searching for something else. I'm using the latest classes12.zip and the xmlparserv2.jar files. Any help?
Thanks.

robert strzelinski (guest) wrote:
: Running a small sample program to test connection to Oracle
: 7.3.4 server. Works OK using thin client connection mode. Using
: OCI connection causes run-time exception labelled:
: "java.exe - Unable To Locate DLL"
: The text in the popup complains of not finding the dynamic link
: library "javai.dll".
: This DLL does not exist anywhere in my java distribution tree.
: What is this library, where does it come from, and where should
: it be found?
: -- rjs
no oracle jdbc oci driver for jdk 1.2 yet ---
also --
The only oracle JDBC driver that can run with JDK 1.2.x is in the
OTN download area and is named "816SDK for JDK 1.2"
it will work with the JDK 1.2.X using the JDBC 1.22 spec from JDK
1.1.X.
IT DOES NOT PROVIDE THE FULL JDBC 2.0 FEATURES/ FUNCTIONALITY
THAT ARE INCLUDED IN THE JDK 1.2.X CLASSES.
you're using a jdk 1.2.x/jdbc 2.0 feature -- which is anticipated
to be included in the 816 driver later this year -- it's not in
the "816SDK" JDBC driver you're using now..
816SDK can be thought of as stepping stone between 815 using jdk
1.1.x and 816 supporting jdk 1.1.x and 1.2.x.
i think of it as "8.1.5 and a half" to avoid the naming confusion
between "816sdk" and "816" .
SEE the following FAQ link for additional details :
http://technet.oracle.com/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm
i hope this helps ...
null

Oracle 8i connectivity with JDK1.4.2 - Failure - Help Needed

I'm new to Java-ORACLE connectivity.
I have installed Oracle 8i v8.1.5 in my Windows 2K Adv. Server with JDK1.4.2.
But I could connect to Oracle from Java neither thru JDBC-ODBC nor JDBC thin drivers.
What are the files ( or classes ) needed for connectivity and where can I download them.
Do the Oracle8i 8.1.7 JDBC drivers have backward compatibility with Oracle8i 8.1.5 ?
Please help me in this regard with utmost information possible and sample code.
Thanks in Advance.
Hara Gopal

For your kind information (more)
When I used JDBC-ODBC Bridge,
It just gave an error message : [Microsoft ODBC for Oracle]
and
when I tried the command at DOS prompt,
javap oracle.jdbc.driver.OracleDriver
it gave message ERROR: javap oracle.jdbc.driver.OracleDriver could not be found
Please Help me
Hara Gopal

Problem with jdk1.3 and WLS5.1.0

I have a problem a when I start WLS5.1.0 with jdk1.3.0
I get AccessControlException when I try to create connection pool.
<WebLogicServer> Failed to invoke startup
class weblogic.jdbc.common.internal.JdbcStartup=weblogic.jdbc.common.inte
rnal.JdbcStartup
java.security.AccessControlException: access denied (java.sql.SQLPermission
setLog)
at
java.security.AccessControlContext.checkPermission(AccessControlContext.java
:272)
at
java.security.AccessController.checkPermission(AccessController.java:399)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
at java.sql.DriverManager.setLogStream(DriverManager.java:397)
at weblogic.jdbc.common.internal.JdbcInfo.initLog(JdbcInfo.java:66)
atweblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:187)
at
weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at
weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)Thanks in Advance,
Anil
RealPrompt, Inc.
575 Harrison Street, Suite 206
San Francisco, CA 94105
415.546.5600 ext. 204
415.546.0202 fax
510.526.6508 Res.
http://www.realprompt.com

Check the documentation on how to correctly configure your policy file.
Michael Girdley
BEA Systems Inc
"Anil Kumar Kona" <[email protected]> wrote in message
news:39d29030$[email protected]..
I have a problem a when I start WLS5.1.0 with jdk1.3.0
I get AccessControlException when I try to create connection pool.
<WebLogicServer> Failed to invoke startup
class weblogic.jdbc.common.internal.JdbcStartup=weblogic.jdbc.common.inte
rnal.JdbcStartup
java.security.AccessControlException: access denied
(java.sql.SQLPermission
setLog)
atjava.security.AccessControlContext.checkPermission(AccessControlContext.jav
a
:272)
at
java.security.AccessController.checkPermission(AccessController.java:399)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:545)
at java.sql.DriverManager.setLogStream(DriverManager.java:397)
at
weblogic.jdbc.common.internal.JdbcInfo.initLog(JdbcInfo.java:66)
atweblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:187)
at
weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
at
weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)Thanks in Advance,
Anil
RealPrompt, Inc.
575 Harrison Street, Suite 206
San Francisco, CA 94105
415.546.5600 ext. 204
415.546.0202 fax
510.526.6508 Res.
http://www.realprompt.com

Is there any change in the constant pool entires with JDK1.4?

Hi,
Here is my simple java class,
class Base
String manuf = "MRF";
class Derived extends Base
Derived() {
manuf = "ABC";
After compiling this class with JDK 1.3 and JDK1.4, i could see the difference in constant pool entries
so please let me know more about these cahnges.
P.S. : written a java program TClass.java to browse the constant pool entries.
i.e if compiled with JDK1.3 , constant pool entries looks as follows,
E:\bugs\jdk1.4\pramila>java TClass E:\bugs\jdk1.4\pramila\Derived.class
There are 21 + 1 entries in the Constant Pool:
Index Tag Reference(s)/Value(s)
1 10 5 15
2 8 16
3 9 5 17
4 7 18
5 7 19
6 1 <init>
7 1 ()V
8 1 Code
9 1 LineNumberTable
10 1 LocalVariableTable
11 1 this
12 1 LDerived;
13 1 SourceFile
14 1 Test.java
15 12 6 7
16 1 ABC
17 12 20 21
18 1 Derived
19 1 Base
20 1 manuf
21 1 Ljava/lang/String;
There are 1 methods:
Code array in method <init> of length 11 starting at byte 231.
If compiled with JDK1.4 constant pool entries looks as follows,
E:\bugs\jdk1.4\pramila>java TClass E:\bugs\jdk1.4\pramila\Derived.class
There are 21 + 1 entries in the Constant Pool:
Index Tag Reference(s)/Value(s)
1 10 5 15
2 8 16
3 9 4 17
4 7 18
5 7 19
6 1 <init>
7 1 ()V
8 1 Code
9 1 LineNumberTable
10 1 LocalVariableTable
11 1 this
12 1 LDerived;
13 1 SourceFile
14 1 Test.java
15 12 6 7
16 1 ABC
17 12 20 21
18 1 Derived
19 1 Base
20 1 manuf
21 1 Ljava/lang/String;
There are 1 methods:
Code array in method <init> of length 11 starting at byte 231.
There is a change in the index 3 can be noticed.
i.e
with JDK1.3 it is "3 9 5 17"
with JDK1.4 it is "3 9 4 17"
Thanks in advance.
Pramila

javac v1.4 emits by default Java 1.2 compatible .class files while all javac implementations since between 1.1.0 and 1.3.1 emit byte default Java 1.1 .class files.
Check to see what effect using the -target option in javac to get the two versions to produce Java 1.1, 1.2, or 1.3 .class files.
Chuck

How to start weblogic with jdk1.4.0

anybody can tell how to start weblogic with jdk1.4.0 correctly?

"jacky" <[email protected]> wrote in message news:<[email protected]>...
anybody can tell how to start weblogic with jdk1.4.0 correctly?Take a look at:
http://www.genuitec.com/products/JDK14_WLS61.pdf

ObjectTAG with JDK1.3.1_01

Similar Messages

Maybe you are looking for