Obligatory fields in plans (IP01)

hello all
I want to make main avtivity type field in transaction IP01 obligatory but, in IMG I found only the possibility to make fields visible or invisible.
other than a transaction variant is there another way? maybe a path in IMG I have not seen?
thanks

Helllo ,
why you want this to be mandatory
You are maintening  it in work centre then it will copy automatically
Regards
chandrashekhar

Similar Messages

  • Leaving dynpro with obligatory fields.

    Hi everyone.
    What I'm trying to find is some way to leave (using a cancel button) a dynpro that has obligatory fields without having to complete them.
    What I've done is including the following code in the PBO user-command module:
      case sy-ucomm.
        when '&CANC'.
          leave to screen 0.
        when '&OK'.
        endcase.
    What happens is that every time that I hit cancel, an error message that says that I must complete every obligatory field pops up and I have to do that in order to leave the dynpro. ¿Any idea about how to fix this?
    Thanks a lot,
    Fernando.

    Hi,
    IN the GUI STATUS for the function code &CANC .have the function type as 'E' (Exit command).
    Then in the PAI..have a new module ..
    MODULE EXIT_COMMAND AT EXIT-COMMAND.
    In that module have your code for CANC function code..
    Thanks,
    Naren

  • How to activate batch field in Planned Order

    Hi all Gurus,
    My customer asked me to activate batch field in Planned Orders (MD12) so that they can enter batch number before converting planned order to production order. By entering a variant in the table I could make it display in the table but not in change mode.
    Is it something to do with screen variant or do you have any suggestions?
    Thanks in Advance
    Sree...

    Hi,
    Please maintain following config...
    1. Go to Production --> Material Requirements Planning --> Procurement Proposal --> Planned Orders --> Define Layout for components list.
    2. Then go to Field Selection Profile. Select the profile and click on profile field selection fields
    3. Click on Change Field Selection and Select Batch or any other required field. Save the changes.
    This should work, pl come back to me in case you have any further doubts.
    Regards,
    Gaurav

  • Lock/ disable field in planned order MD12

    Dear expert,
    Can we lock the field in planned order? In my case, I want the purchasing staff to be able to change only the production version, for others field i want them to be locked. Therefore the purchasing cannot change any fields in there except the production version.
    this is due to the need for material subcon.
    Maybe u can give any advice. what should i do?? do i need to make new customizing t-code for ex: ZMD12 or just make new customizing from authorization t-code su3?
    Thanks
    Pauline

    Dear Pauline,
    Check in SE93,by creating a new T Code ,with the start object as Transaction with variant.
    Transaction type: Variant transaction
    In the SAP Reference IMG, under "Basis Components" -> "Application Personalizaion" -> "Tailoring of Application Transactions",  you can define transaction variants. These allow you to preassign values to fields within a transaction, define field attributes, or hide entire screens.
    To run a transaction variant, you define a variant transaction. On the next screen, enter the name of the transaction and the name of the variant.
    Note
    Variant transactions are client-specific.
    If you try to start a variant transaction and the corresponding variant does not exist, the transaction runs without a variant.
    If the above does not helps you means,check this link to explore more,
    Transaction variant
    Regards
    Mangalraj.S

  • FM  BAPI_SALESORDER_GETLIST obligatory field

    hi gurus,
    regarding about FM BAPI_SALESORDER_GETLIST, im developing a report base on MAT NUMBER for da sales. As client request the report should pull the data from sales quantity by MAT NUM , sales Org and Date in da selection screen. but the problem with  FM BAPI_SALESORDER_GETLIST is, customer Number is a obligatory field. End user just want to see the sales quantityfor each matrial.
    so, how can i skip or avoid using Customer Number field for  'BAPI_SALESORDER_GETLIS'   OR is there any FM where i can get sales quantity  data by using MAT NUM, SALES ORG and DATE..
    oh yeah... i did a coding for this in normal way, but its taking very - very  long time to display from table vbap. if user select mat Num.. it will display very fast. but, if the user execute using only  sales org it will take very very very long time.
    thanks in advance.
    Edited by: MAYAT on Dec 14, 2009 10:53 AM

    hi... the probelm is, its taking very long time to fetch date from da table.... the probelm is end user... end user will only select sales org and execute.
    this concept will take very long to just to display the output. in vbap table, there are more thna 5 million of data. thats why im looking for FM, to make the report more efficient.
    thanks...
    regs mayandi

  • Text data source for the field Position(PLANS)

    Hi Experts,
    I have an infoobject ZPOSITION which i am using in a cube for this i can able to display key values but i want to display text for this ZPOSITION. The source for this field is Position(PLANS) which i have tacken from pa0001 table.
    I have an another infoobject 0HRPOSITION for this i have already loaded data using data source 0HRPOSITION_TEXT.
    Is there any other text datasources for this field Position(PLANS)?
    And
    Is it possible to load data from one info object to another info object?
    Regards,
    Sridhar.K

    Hi Sridhar,
    Check out in the infotype PA0001 for the check table for this field. In this table you will have the description for the field PLANS (Position).
    I request you to catch hold of functional HR team member to know where the text value for the Position (PLANS) is stored. You can get the info from them immeadiatly.
    After knowing the table where the text values for Position (PLANS) are stored, you have to create a text datasource using RSO2 transaction and replicate in BW and load data from the R/3 table.
    Hope this helps you.
    Regards,
    Saravanan.

  • Two extra field in Planned Orders

    Dear Gurus,
    The client for which I am working on discrete and now some of their products want to go for REM.
    In discrete manufacturing, there is Production Order for the finished and assemblies made. Two extra fields were provided and recorded when Production order is made for eg entering a software version no, PO no in the order which is a reference.
    Now having going for REM, how to capture these two fields in REM backflush scenario?
    Can we have the two open fields in Planned Orders?
    or while backflushing, finally we have to give this two extra fields? Is there any provision? But at end of every backflushing booking, it is difficult for the user to give the two extra values.
    How to handle this scenario?
    Please guide me.
    Srini

    In REM there is one user exit - XMRM0001, by which you can make the system to popup a screen during backflush and enter the required data in this screen and make the system to uodate required field in std table where the rem data is stored. We used it for entering the SILO number. May be it will be helpful to you.

  • How to change the field 'Current Planning Period' in xRPM portal?

    Hello All,
    In xRPM portal, under portfolio management --> financial planning, we have a field 'Current Planning Period'.
    Can anybody tell how to change the values of this field for all the projects/items at once?
    Also, when I am trying to change for individual projects. its opening the F4 help but not  selecting the date on which I double click.
    Thanks
    Niti.

    No, you cannot add another vPC peer-keepalive configuration.
    Taking down vPC peer-keepalive will not affect your vPC peer-link and vPC operation. It will be a problem if and only if vPC peer-link went down after the peer-keepalive is down first, this will cause dual active.
    Regards,
    jerry

  • Purchase Requisition header text as obligatory field

    I need you help!!!
    Problem description: requestor forget to put some text in the header text of the purchase requisition, that cause that manager not release the requisition due missing information.
    So I have a request to do the header text of the purchase requisition (ME51N) as obligatory field, is that possible via configuration??

    Marco,
    No, this is not possible via configuration. You will need to look into some <i>user exit</i> to make this feasible.
    Hope this helps.
    H Narayan

  • Obligatory fields in a Maintenance View

    Hi All,
    I have a Z table. I have created a Maintenance View for this table. My requirement is to have a few fields as mandatory in this view so that when the user enters data, these fields should appear with the Obligatory symbol in the grid.
    Regards,
    Madhur

    Hi Madhur,
    Whenever u craete a table maintainence view one or two  screens are generated depending upon the option u have selected.
    goto SE11 ->utilities ->table maintainence .
    there find ur screen no ( 1 by default)
    click on that u will enter into screen painter.
    There find ur field and specify its attribute as required. Dont forget to activate the screen onece done.
    Thanks & Regards,
    Ankur

  • Obligatory Fields in Moule Pool

    Hi all,
    My requirement is such that...
    I have created 2 radiobuttons in the selection screen
    When I select the 1st button, a particular field in the same screen should become obligatory and when I select the 2nd button another field should become obligatory.
    Can anyone tell me how to achieve this?
    Thanks,
    Amrita

    Hi,
    You can try Loop At Screen Statement,
    That is in the PBO of the selection screen
    you can check the Screen Goup the one that is
    assigned to both the radio buttons in if else statements,
    If the first radio button is selected you can give the field names
    required for the first radion button selection output by giving
    screen-name = Field name and make
    field-required = 'X' .
    Same for the else statement for second radio button.
    Hope it helps
    Regards
    Mansi

  • Additional Field in Planned Order

    Dear Experts,
    Is there any additional field can be used to store additional informaton like shift?
    For an example:
    Shift Y appear in upload planned order program, then Y will be shown in Planned order.
    Is there any addinitional field or user exist can be used in planned order?
    Thank you.

    dear friend,
    there is NO any field you can use for your particular purpose.
    I suggest you can't use any user exist.
    Ask your abaper to extend the standrd table PLAF
    or
    to create a new custom table  and write a program which uses it.
    good luck!

  • How to set User-field in Plan order

    Hi
    could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
    thanks
    henry

    Hi,
    Actually these user defind fields are used/assigned in the routing.
    Initially u have to define your own user defind profile through OPEC transaction.
    Assign this profile in the routing.
    So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
    Then after executing the particular operation some amount of silver chips or silver scrap will generated .
    To keep chip/scrap qty operation and date which user defind is used.
    Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
    Regards
    Vijay

  • Skip validation of 'OBLIGATORY fields populated or not'? so that user GO_BACK

    Hello
    I placed a handful fields on selection screen, wherein there are push buttons are there and input free text fields.
    Based on these button cliks and controlling the other fields visibility. So, user thinks that there are 2 screens. I also placed a BACK button, bcz user when cliks BACK button then the user thinks he/she is navigating from 2nd creen to 1st screen.
    I made these free text input feilds as OBLIGATORY addition. So, when user cliks BACK button am getting error that 'Pls. enter required fields'
    Pls. let me know how can I skip this error upon clikcing of BACK button, I mean, in this case we don't need to chk mandatory.
    Thank you

    Its not possible if you use the obligatory functionality. It defeats the purpose of obligatory. Instead don't use obligatory but check if the field is initial by your own and then display custom error message.
    you can skip this check if the sy-ucomm is for the BACK button.
    Thanks,
    Vikram.M

  • Cjr2 - protect AND unprotect fields in planning layout1-701 for data input

    Where can I configure the field status of a field in teh planning WBS layout 1-702 (profile SAP ALL) in CJR2.
    I would like to protect and unprotect certain fields for input.

    standard planning layouts are protected. you can not change it. create your own planning profile..
    Or try by Using a transaction variant (SHD0)
    may be you can also try GuiXT settings..
    Please search the forum / internet for more informations.

Maybe you are looking for