Obligatory node 'E1OILKV' missing, Not getting'12'Status fromR/3 to XI Port

Hi,
I am sending the Customer Master Data from R/3 to XI. I enhanced the Idoctype OILDEB06 to ZOILDEB06. I am getting the message code status as 03. "Data sent to the Port". But if i execute the the Report RBDMOIND. It is not moving to status 12. "Despatch Ok".
I Got the error message in the tRFC as "Obligatory node 'E1OILKV' missing in the structure".
I am able to see the structure E1OILKV in the IDoc with data. But why this error is coming.
Could any one can help on this Issue.
Thanks and Regards,
Venkat.

The Idoc is going to the Recieving End only till the General View and Company Code view. E1OILKV Segment comes under the Sales View. Since Sales view is not changed it is not capturing the Change Pointers. If Sales view is avilable in the Idoc it is not going to the XI Port. tRFC gives the error.
We checked for other Idocs Which were enhanced. Those other IDocs{example Cost center,Vendor Idocs} are going.
I tried to send the Standard Idoc OILDEB without the Enhancements. It is going to the XI Port. Once i Send the OILDEB06 With Enhancements. It gives that error.Obligatory node 'E1OILKV' missing in the structure. As i already said, I am able to see Data in this segment using the Idoc editor. But not fully moved to the Configured XI Port.
Thanks,
Venkat.

Similar Messages

Obligatory node 'E1KONP' missing in the structure

Hi Experts,
I am extending cond_a04 idoc. am adding the custom segment as the child segment of E1KONH. Am populating the custom fields of this segment in an enhancement in LVKOEF01. This segment is populating and the idoc is successful but its not reaching PI side. In SM58 it shows status text as "Obligatory node 'E1KONP' missing in the structure" and the function module it shows in SM58 is "IDOC_INBOUND_ASYNCHRONOUS". Am confused. When sent without this extended segment its reaching PI side. What might be the problem??

hi
they have imported and updated the idoc definition.
Problem solved.
Need to check the structure in IDX. structure in IDX was wrong. when changed this it is reaching PI.Thanks.
Regards
Sridevi S
Edited by: Sridevi Sivanandam on Aug 5, 2010 2:59 PM

Obligatory node 'ZMAT_SPO' missing in the structure IDOC

Hello,
Scenario is : File - IDOC
I am trying to post the contents of the file into Matmas
The file gets picked and shows up a red color flag with the error : :Obligatory node 'ZMAT_SPO' missing in the structure Matmas04 Matmas04 "
I tried by disabling segment ZMAT_SPO, tried mapping to a constant.
nothing worked
When I copy the payload from moni, and do test in MM, its successful
What could be the problem?
thanks
nikhil.
Edited by: nikhil a on Jan 21, 2008 9:52 AM

Here is the error message:

<Trace level="1" type="T">Message-GUID = 8F7E3AA0C7FD11DC9E5600132165C741</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0000</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
I disabled that field in the course of MM in IR
do I need to reimport when i do this? i dont think so .....
nikhil

Error: Obligatory node 'E1MAKTM' missing in the structure

Hello All
   I extended material master IDOC.
After extending, the segments look like this:
ZMATMAS05
     - E1MARAM
            - ZEXTENDED_SEGMENT
            - E1MARA1
            - E1MAKTM
            - E1MARCM
so on and so forth.
When I create idocs, I get a message saying that the message is successfully sent. When I see in SM58, I see the message "Obligatory node 'E1MAKTM' missing in the structure".
The idoc which is created has E1MAKTM segment, but it is still giving the error.   Am I extending at the wrong position?
Thanks
Naga

looking at this
ZMATMAS05
- E1MARAM
- ZEXTENDED_SEGMENT
- E1MARA1
- E1MAKTM
- E1MARCM
makes me just feel that all your segments are at the same level.
but usually the E1MAKTM is a sublevel to E1MARAM
so it should look like this:
ZMATMAS05
- E1MARAM
- -ZEXTENDED_SEGMENT
- -E1MARA1
- -E1MAKTM
- -E1MARCM
- - -E1MARDM

Not getting N status for E3000

I just reconfigured my router after some problems and I'm not able to get N status on it.
My wireless adapter only reads G right now, so I only get speeds of 54 max Mbps rate. How can I go about letting it get N status? I know it's not my wireless adapter because I live in a crowded area and I can pick up N on other wireless routers around me. But I don't see any options in the router settings to force N status.
Thanks for your help.

You can try to set the router’s network mode to wireless-N only and to manually set the card to wireless-N. In the event that this will not work, then perform a firmware upgrade and reset the router afterwards.

Am not getting correct status of IDOC after using MASTER_IDOC_DISTRIBUTE FM

Hi,
Am triggering an out bound custom IDOC by using my_custom_FM for sales orders. With in my_custom_FM am calling standard FM 'MASTER_IDOC_DISTRIBUTE' and distributing custom IDOC. If IDOC got failed I have to send an error message to SAP inbox (am achieving this, explicitly by using a standard FM). But, immediately after executing FM MASTER_IDOC_DISTRIBUTE, i checked the IDOC status in 'communication_idoc_control' parameter, its saying '30'(am keep on refreshing EDIDS table and WE05), even though IDOC went well. After am completely coming out from debugging the status has changed to '03' in EDIDS and WE05!
1) Let me know how to get the correct status of IDOC immediately after executing the FM MASTER_IDOC_DISTRIBUTE (because, in next line am calling my message sending FM based on IDOC status).
2) Or do i need to place my message sending FM some where else?
Thank you

Thank you.
Unfortunately this is happening in an UPDATE task, still as a trial i tried to use COMMIT WORK, as expected it thwon a dump. Also tried only with DEQUE_ALL, no use.
Are you sure that I can process the subsequent step/block of code(calling error message sending FM to SAP inbox) based on SY-SUBRC of MASTER_IDOC_DISTRIBUTE FM, not based on the IDOC STATUS?
Because, just as trial, i have given a junk value(say, XXXXXX) for Message type in IDOC control, just before triggering the MASTER_IDOC_DISTRIBUTE FM.......but, still am getting SY-SUBRC = 0!! with a status of 29. Hence am thinking to do not relay on SY-SUBRC=0, sorry if am wrong
Should i put my code of (calling error message sending FM) in any user-exit?
Thank you

Obligatory node missing in the structure

HI,
I am posting an idoc from XI to SAP. I'm getting a message
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Obligatory node 'E1MBXYH' missing in the structure WMMBID01 ZMCTWAHR</SAP:P1>
I am getting the same message for all of my sap inbound interfaces. Do u think this is a mapping issue ?
The metadata in IDX2 looks good to me and if you look at the payload , it looks like the idoc is formed correctly
<?xml version="1.0" encoding="UTF-8" ?>
- <ZMCTWAHR>
- <IDOC BEGIN="1">
- <E1MBXYH>
<BLDAT>20070114</BLDAT>
<BUDAT>20070109</BUDAT>
- <Z1CT000>
<WHSENUM>6</WHSENUM>
<ERDAT>101002</ERDAT>
<SEQNBR>3</SEQNBR>
</Z1CT000>
- <E1MBXYI SEGMENT="1">
<MATNR>25-50093-01</MATNR>
<BWART>R</BWART>
<LIFNR />
<ERFMG>69</ERFMG>
- <Z1MCTIN>
<OWNER_ID />
<MODEL_LOT />
<CTRY_CODE />
<SINGLPLATE>0</SINGLPLATE>
<IBNDORDNUM />
<IBNDORDTYP />
<ORIGHOLCAT>HOLD</ORIGHOLCAT>
<NEWHOLCAT />
</Z1MCTIN>
</E1MBXYI>
</E1MBXYH>
</IDOC>
</ZMCTWAHR>

ZMCTWAHR is the enhancement to WMMBID01.
Please also look at another example
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Obligatory node 'Z1CT000' missing in the structure ZDCTDSTA</SAP:P1>
<SAP:P2 />
<?xml version="1.0" encoding="UTF-8" ?>
- <ZDCTDSTA>
- <IDOC BEGIN="1">
- <Z1CT000>
<WHSENUM>6</WHSENUM>
<ERDAT>20070101</ERDAT>
<ERZET>110101</ERZET>
<SEQNBR>6</SEQNBR>
- <Z1DCTS0>
<VBELN>7080056</VBELN>
<BOLVL />
<OUTORDTYPE>SYST</OUTORDTYPE>
- <Z1DCTS1>
<POSNR>10</POSNR>
</Z1DCTS1>
</Z1DCTS0>
</Z1CT000>
</IDOC>
</ZDCTDSTA>

0NOTIFICATN Status - Newly defined status does not get extracted?

Hi All,
There are few status defined in the SBIW under NTF1 and when extracting 0NOTIFICATN all these status are showing up. I need a new status need to be brought in from ECC. I went and added the status DLFL in the status maintenance of SBIW and when extracting 0STATUSNTF1_TEXT, I see the newly added status shows up, but However when I extract 0NOTIFICATN_ATTR, the new status does not come for any of the notifications.
Does any one know why it is not picking up the new status that I defined? Is there any other steps missing to get the status?
Any help is appreciated.
Thanks,
Alex.

Dazed,
I think you can assign any status to any STATUS* field. If you look closely you can see same status such as 'DLT' etc is assigned to multiple status. I am thinking more in line with order of status may be working here.
01 - OSNO
02 - NOPO
03 - NOPR
04 - NOCO
05 - DLFL
but the record has status in the following order
NOCO OSTS DLFL. Since it finds NOCO before DLFL and the value of NOCO is given 04 and DLFL is given 05. NOCO seems to be taking the priority. I just want some one to confirm the way it behaves. Because the system is already defined with first 04 values and has been running the process for the past 2 years, and now I want to introduce the 05 as a new status.
Does it makes sense?
Alex.

Application deployed on one node is not getting displayed in second node

Our environment is linux x86_64 and FMW version 11g,weblogic 10.3.4.0 ,soa 11.1.1.4.
We have installed weblogic cluster :
node1: Admin server,soa_server1
node2:soa_server2
when we deploy any soa application in one node it is not getting published in second node.We have taken oracle support also still problem is not solved.
They told us to configure coherence ,we have taken owc from metalink .
very urgent.
Any one can help me.

You have a cluster consisting of soa_server1 and soa_server2 or are these stand-alone WebLogic instances?
Is soa-infra active on soa_server2?
Can you check if soa-infra can be reached on both the server instances (http://hostname:port/soa-infra/)
When soa_infra cannot be reached on soa_server2 can you check the logging to see what errors
are occuring.
Some examples that set-up a clustered envionment can be found here: http://middlewaremagic.com/weblogic/?p=6872
and here: http://middlewaremagic.com/weblogic/?p=6637

Initialization parameters not getting populated correctly during DBCA

This problem is observed on Oracle 10.2.0.1 Linux x86 and RedHat Enterprise Linux 4 ES Update 5.
I tried to use DBCA template file to create an Oracle database (see below for the template file content). The DB creation was successful, but the initialization parameters did not get populated into /oracle/u01/app/oracle/admin/ora10g/pfile/init.ora the way I would expect.
ora10g.dbt template - file content
========================
<DatabaseTemplate name="ora10g" description="" version="10.2.0.0.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="true"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
<option name="HTMLDB" value="false"/>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="audit_file_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/adump"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/bdump"/>
<initParam name="compatible" value="10.2.0.1.0"/>
<initParam name="control_files" value="(“/u01/oradata/{DB_UNIQUE_NAME}/control01.ctl“, “/u02/oradata/{DB_UNIQUE_NAME}/control02.ctl“, “/u03/oradata/{DB_UNIQUE_NAME}/control03.ctl“)"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/cdump"/>
<initParam name="cursor_sharing" value="EXACT"/>
<initParam name="db_block_size" value="16384"/>
<initParam name="db_cache_size" value="1" unit="GB"/>
<initParam name="db_domain" value=""/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="ora10g"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="0" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="log_buffer" value="64000000"/>
<initParam name="open_cursors" value="300"/>
<initParam name="pga_aggregate_target" value="1" unit="GB"/>
<initParam name="processes" value="300"/>
<initParam name="recyclebin" value="off"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="sessions" value="335"/>
<initParam name="sga_target" value="1600" unit="MB"/>
<initParam name="shared_pool_size" value="128" unit="MB"/>
<initParam name="sort_area_size" value="4194304"/>
<initParam name="transactions" value="610"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_retention" value="10800"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>80</percentageMemTOSGA>
<customSGA>false</customSGA>
<characterSet>WE8ISO8859P1</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}/admin/{DB_UNIQUE_NAME}/pfile/init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="false">{ORACLE_HOME}/dbs/spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="control01.ctl" filepath="/u01/oradata/{DB_UNIQUE_NAME}/"/>
<image name="control02.ctl" filepath="/u02/oradata/{DB_UNIQUE_NAME}/"/>
<image name="control03.ctl" filepath="/u03/oradata/{DB_UNIQUE_NAME}/"/>
</ControlfileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/sysaux01.dbf">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">500</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/system01.dbf">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">500</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/temp01.dbf">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">100</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/undotbs01.dbf">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">100</size>
<reuse>true</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/sysaux01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>false</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/system01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>2</allocation>
<uniAllocSize unit="KB">1024</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>false</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/temp01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<bigfile>false</bigfile>
<datafilesList>
<TablespaceDatafileAttributes id="/u01/oradata/{DB_UNIQUE_NAME}/undotbs01.dbf">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">1048576</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="redo01.log" filepath="/u01/oradata/{DB_UNIQUE_NAME}/"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">1048576</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="redo02.log" filepath="/u02/oradata/{DB_UNIQUE_NAME}/"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">1048576</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="redo03.log" filepath="/u03/oradata/{DB_UNIQUE_NAME}/"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
Right after DB creation using DBCA, I would expect to see the following initialization paramaters populated in /oracle/u01/app/oracle/admin/ora10g/pfile/init.ora file that match the values I specified in the template file, but it appears that some initialization parameters are either not populated or incorrectly populated.
db_cache_size=1g
(this parameter entry is missing, not getting popultated at all)
sga_target=1600m
(sga_target populated with 1211105280)
pga_aggregate_target=1g
(pga_aggregate_target populated with 403701760)
shared_pool_size=128m
(this parameter entry is missing, not getting popultated at all)
large_pool_size=0
(this parameter entry is missing, not getting popultated at all)
java_pool_size=0
(this parameter entry is missing, not getting popultated at all)
log_buffer=64000000
(this parameter is correctly populated)
transactions=610
(this parameter is correctly populated)
recyclebin=OFF
(this parameter entry is missing, not getting popultated at all)
cursor_sharing=EXACT
(this parameter is correctly populated)
Does anyone know why some initialization parameters did not get populated or incorrectly populated into init.ora?
Thanks in advance.
Ken

Likely dbca currently uses the spfile to store the parameters, as you should do too.
Apart from that the pfile Oracle uses is located in $ORACLE_HOME/dbs/init<sid>.ora
It is possible this file is soft-linked to the file you mention.
If it isn't the file you mention is not being used at all.
Hth
Sybrand Bakker
Senior Oracle DBA

Some clients do not get software deployment, actions missing after OSD

We have Win7 SP1 x64 rollout going on from XP, a refresh scanario on ConfMgr 2012 SP1 non-CU site server. Our testing phase went fine with 100% success, but just before starting rolling, I approved updates November 2013 - January 2014 and did too
quick test. So there was lot of issues, after that I had to disable those patches during OSD and let them be deployed via Software Center, after OSD.
Still, about 10% clients comes out with missing actions in ConfMgr client, or/and do not get desktop deployment software. We have 2 additional apps comming up to to user profile, so after first logon these 2 apps gets installed. And in 10% this does not
happend.
- bounderies are fine, client location .log is clear.
- usually ccmsetup /install -> reboot -> ccmsetup install with MP paraments solves the problem, but not always. It´s also too slow solution
- I noticed, that in this enviroment, the 3rd scheduled task called "Configuration Manager Maintenance" is missing. I only see Idle and health eval. I had similar case in my lab with R2, and that maintanced task fixed my client with missing in
10 minutes!
- our guys who installs Computers, claim that this behavior is seen more with refresh TS rather than with PXE boot - new machine scannario.
- there are additional role based applications with required deployments, and they do not appear, even if the actions are fixed
Any hints what to do? I would like to avoid upgrading site server to R2 or updating it during active rollout.

Skywalker - I agree, solving Software Updates issues in OSD is a challenge. It´s shooting ducks to figure what KB fix breakes the OSD hook. Recapturing .wim in a middle of a rollout is not the option here, but you´re right. In other side,
if patches breakes OSD during deployment and install software update step, it´s no guarantee the capture will solve your problems. I will check the registery, didn´t know that before. I have my suspesious, that TS might not finnish properly, though there is
no errors. MDT brings lot of more logs and status messages, so solving this isn´t easy.
Torsten - sometimes, waiting for hours, rebooting, killing and restarting prosess isn´t enough. Even if all actions are precent. Also, in a real life users can´t wait for hours. I´m very keen do understand, why there is no 3rd schduled task
of maintance.

User Status Profile not getting copied to Objects (ECM)

Dear Experts,
I Have created Change Type assign with Status Profile, This Profile is correctly appearing in Change NO (ECR),
In Header but After Selecting some of the Objects like, BOM or Material the Status Profile is not getting copied.
I have two level of Approvals required.
do am i missing something here...
Please suggest
Thanks
Regards
Raghu
Edited by: raghu m on Nov 12, 2009 10:34 AM

Closed!

I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have. would love some good tips.

Try this:
Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

Hier Node with character (e.g. 11100A) is not getting displayed in report

Hi All,
I have loaded the Finanacial Statement Version Hier in BI. It is perfectly loaded in the InfoObject 0GLACCEXT.
Some Hier Nodes contain charcters in the Node name like 1100A and 1100B and rest are all number like 1100, 1200, 11000 etc.
While I run the Report the Hier Nodes with nos (like 1100, 11000) are perfectly getting displyed in the report. But the Hier Nodes having the characters (like 1100A and 1100B) are not getting displayed into the Report and all the GLs under it are going into Unassigned node in the Reports.
Plz help me.
Regards,
Sandeep

Sandeep,
Your hierarchy is made up of characteristics with the values 1100, 11100A etc.
In your hierarchy is RSH1, does each node have the specific characteristic value Node 1
-1100
-11100A etc
Or is it a range i.e.
Node 1
1000 : 11100A
Regards
Gill

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

Obligatory node 'E1OILKV' missing, Not getting'12'Status fromR/3 to XI Port

Similar Messages

Maybe you are looking for