OBPM 10.3.1 Configuration issue in Linux (RedHat Enterprise Linux AS rel 4)

Hi,
OBPM enterprise version: OBPM 10.3.1 for WL @ linux, 32 bit version
WLS: 10.3.0
OBPM directory configuration wizard is empty / blank. (graphical mode)
Am using vnc viewer 4.1.1 free edition in my windows XP desktop. I connect to the linux box using the desktop details obtained when vncserver is run in the linux. When OraBPMwlHome/bin/obpmadmcenter is run, the Oracle BPM Admin Center opens up showing the Configuration link. After clicking the Configuration link, another window opens showing the Directory tab. When Add button is clicked, shows up an empty / blank window. I do not see any of the check boxes /radio buttons / buttons. If windows keyboard ESCAPE is done, do you want to cancel this wizard, yes /no comes up.
I tried searching the net and gettig under the documentation, but could not find any resolutions.
Please LMK,
1. how to do hybrid directory service configuration using console mode
2. if any patches to be applied for resolving graphical mode issues.
Thanks & Regards,
Swamy

Hi Ariel,
Thanks a lot for the reply.
I do not see any desktop effects like Compiz, Beryl installed in my windows XP desktop. The X windows client that i am using, the vncviewer, does not seem to have any special X effects. Could you please suggest, how I can disable X effects and any workarounds / alternatives for my linux version.
I also tried using the omni-X windows server (a different box, on windows 2000 server), setting the DISPLAY in the linux box. I face the same problem. The 3rd window (directory type provider selection) is blank.
Appreciate all your help.
Thanks,
Swamy
Edited by: user8994281 on 15-Feb-2010 21:40

Similar Messages

Trying to configure RedHat Enterprise 4.3 linux jumpstart server

I am trying to configure a system under RedHat Enterprise 4.3 linux to jumpstart
a Sun Ultra 60 and install Solaris 9. Web pages and SysAdmin 4/2005 article
"Portable JumpStart Environment" have not addressed my problem. I am using
Internet Systems Consortium DHCP Server V3.0.1. The bootblock is
delivered to the sun client and executes.
The entries in dhcpd.conf conform to those published in various Web
pages and the article "Portable Jumpstart".
The Solaris 9 OS distribution is exported thus:
/wks xxx.xx.xx.0/24(ro,wdelay,no_root_squash,mountpoint)
The load fails upon execution of .../Solaris_9/Tools/Boot/sbin/rcS
I think the problem may be with NFS. The mount request of the
exported filesystem appears to work:
rpc.mountd: authenticated mount request from sunxxx.xx.xx.xx:1023 for /wks/dist/sun/sparc/sunos5.9/9_404/Solaris_9/Tools/Boot (/wks)
The first errors reported are:
/sbin/rcS: /dev/null: cannot open
/sbin/rcS: /dev/null cannot create
I have captured the conversation between the linux jumpstart server and
the Sun client using tcpdump: tcpdump -vvv -s 192 host server and client.
I am not highly skilled at interpreting the tcpdump output; the cause of
the failure is not obvious to me.
I have successfully used a jumpstart server under Solaris 9 for quite some time. ISC DHCP is deployed on the Solaris jumpstart server.
Thank you,
D. Castellano

While some have reported success doing this, I have heard of many failures. The common thread appears to be that when accessing device files, the Solaris client gets back something odd from the Linux NFS server.
Certainly this was the case for every attempt I knew about from a 2.2 kernel and earlier. I have see success reports, but do not have details about exactly which kernel or NFS patches were present.
This works fine from Network appliance and FreeBSD NFS servers, so I think there's some sticky point with the Linux NFS server that just doesn't handle the device files in the same manner.
See this newsgroup post (and the accompanying thread). It contains some discovered issues and some Linux servers that are reported to work.
http://groups.google.com/group/comp.unix.solaris/browse_frm/thread/448f37ee205860c1/e224fe968442d3c3
Darren

Configuration issue of syslog.conf

Dear All,
My client is facing a configuration issue of syslog.conf.
They have set a cacti on a Linux server for monitoring of all servers snmp & syslog.
The part of snmp has set up successfully but cannot send the syslog to the cacti.
My client want the syslog can keep on the localhost and send to cacti for monitoring
we have tried to do the following things for make it work:
Insert the information (*.* @10.251.99.74) in /etc/syslog.conf
Restart service of system-log
Deleted all word of loghost in the /etc/hosts file
But still not work. Anyone can give me suggestion or idea about this?

Thank you for your reply.
It is tab. But I think the problem is solaris cannot use *.* to represent all logs.
I have used the following is work
*.err;ker.debug;daemon.notice;mail.crit @10.251.99.74
If that is not the mail reason, please put me right.

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue
=============================================
Hi All,
I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's happening is that when I run my report, it looks for the library attached to it. If I define the REPORTS_PATH in reports.sh, it works fine.
What I want to achieve is to push reports to use REPORTS_PATH environment variable from rwserver.conf instead of reports.sh
Someone told me to remove the REPORTS_PATH from reports.sh and add the REPORTS_PATH from reports.sh to a default.env in rwserver.conf, but it didn't worked.
What I know about the report server stuff in 11g Fusion Middleware is that it consists of two different servers (Standalone and In Process). Our application runs report using SRW.RUN_REPORT which basically use In Process report server setting in rwserver.conf to run the report.
The heirarchy in which reports try to look for the REPORTS_PATH is
1) REPORTS.sh
2) rwserver.conf
3) Settings as per Oracle Enterprise Manager Configuration Settings.
My standalone report server name is ReportsServer_hostname_asinst_F and the In Process Server name is rep_wls_reports_hostname_asinst_frd. When I define rep_wls_reports_hostname_asinst_frd (In process Report Server Name) for the server name parameter, I do not get any results for the report run using srw.run_report. Also I can't see the reason behind the report executed because of the following issue
http://hostname:8888/reports/rwservlet/showjobs?server=rep_wls_reports_hostname_asinst_frd
REP-51019: System user authentication is missing.
** the Singlesignon in rwservlet.properties is defined as no
But when I define ReportsServer_hostname_asinst_F (Standalone Report Server Name) as server parameter and ran the report using srw.run_report, I get result with the REPORTS_PATH defined in reports.sh not using rwserver.conf file.
http://hostname:8888/reports/rwservlet/showjobs?server=ReportsServer_hostname_asinst_F
(which shows the report just run).
Can someone who did Report Server configuration using ENV files (changing rwserver.conf), pls. send me the screenshots. Want to make sure if I am changing the correct files under correct location.
Pls. feel free to ask me questions related to the environment set up.
Thanks

Your question belongs in {forum:id=84}
John

How to configure DHCP on linux jumpstart for solaris installation

I have configured jumpstart on linux and able to install solaris on SUN sparcs
using rarp and bootparams files.now im trying to use linux DHCP for solaris clients. I have the done the DHCP setup on linux using this doc http://www.sun.com/bigadmin/content/submitted/setup_dhcp.jsp.
but when im trying to boot the sun spac client with boot net:dhcp - install command it is failing with error "panic - boot: Could not mount filesystem.
Program terminated". exports file is ok and NFS service is also running.
Please help me on this issue.
Thanks in advance.
Shashi

Darren,
Thanks for the response.
I tried to install client60001dev (sparc client) from server60060pxe (linux jumpstart) as follows
client60001dev is able to get the IP address from server60060pxe DHCP and then the boot file also, but after that the client is not showing any NFS queries.
{0} ok boot net:dhcp - install
Boot device: /pci@1f,4000/network@1,1:dhcp File and args: - install
Using Onboard Transceiver - Link Up.
Timeout waiting for BOOTP/DHCP reply. Retrying ...
Timeout waiting for BOOTP/DHCP reply. Retrying ...
2aa00
Server IP address: xx.xx.xx.119
Client IP address: xx.xx.xx.111
Subnet Mask : 255.255.255.0
Using Onboard Transceiver - Link Up.
panic - boot: Could not mount filesystem.
Program terminated
tcpdump on server60060pxe
03:16:12.292836 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.303646 IP client60001dev.20759 > server60060pxe.42445: UDP, len
gth 4
03:16:12.303669 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.314479 IP client60001dev.20759 > server60060pxe.42445: UDP, len
gth 4
03:16:12.314501 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.325313 IP client60001dev.20759 > server60060pxe.42445: UDP, len
gth 4
03:16:12.325347 IP server60060pxe.42445 > client60001dev.20759: UDP, len
gth 516
03:16:12.336158 IP client60001dev.20759 > server60060pxe.42445: UDP, len
/var/log/messages on server60060pxe
Feb 26 03:15:35 server60060pxe dhcpd: DHCPDISCOVER from 08:00:20:fe:4a:23 via eth0.
369
Feb 26 03:15:35 server60060pxe dhcpd: DHCPOFFER on xx.xx.xx.111 to 08:00:20:fe:4
a:23 via eth0.369
Feb 26 03:16:08 server60060pxe dhcpd: Dynamic and static leases present for 139.185
.168.111.
Feb 26 03:16:08 server60060pxe dhcpd: Remove host declaration client60001dev or remove
139.185.168.111
Feb 26 03:16:08 server60060pxe dhcpd: from the dynamic address pool for xx.xx.xx
/24
Feb 26 03:16:08 server60060pxe dhcpd: DHCPREQUEST for xx.xx.xx.111 (xx.xx.xx.
119) from 08:00:20:fe:4a:23 via eth0.369
Feb 26 03:16:08 server60060pxe dhcpd: DHCPACK on xx.xx.xx.111 to 08:00:20:fe:4a:
23 via eth0.369
Feb 26 11:16:09 server60060pxe in.tftpd[10266]: RRQ from xx.xx.xx.111 filename 8
BB9A86F
Feb 26 03:22:00 server60060pxe kernel: eth0.369: dev_set_promiscuity(master, -1)
Feb 26 03:22:00 server60060pxe kernel: device eth0 left promiscuous mode
Feb 26 03:22:00 server60060pxe kernel: device eth0.369 left promiscuous mode
Shashi

OC4J Configuration issue

Hi,
I tried to put my database in Archivelog mode through EM , at the time of restarting the database it didnt start... instance is starting but database is not opening....
I tried this command but its giving error... ( I am running 10g r2 , on RHEL 5 which is install on Oracle virtual toolbox )
emctl start dbconsole
OC4J Configuration issue. /opt/oracle/oraclehome_112/db_1/oc4j/j2ee/OC4J_DBConsole_myhostname_orcl not found.
where orcl is the instance name.
and this directory, OC4J_DBConsole_myhostname_orcl, does not exist on the file system.
In some article I read ... the solution I tried to type...
http://kamranagayev.com/2011/03/21/step-by-step-installing-oracle11g-on-linux/
Feedback no. 19
./emca -deconfig dbcontrol db -repos drop
bash : ./emca : No Such file or Directory
./emca -config dbcontrol db -repos create
Thanks and regards...

Hello;
I'm thinking this step was either missed of you have a typo :
Change the entry of .bash_profile file of the oracle user and add following lines:
vi /home/oracle/.bash_profile
export ORACLE_HOME=/u01/home/oracle/product/11.2.0/db_1
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export PATH=$ORACLE_HOME/bin:$PATHIf your ORACLE_HOME is set it should find the "emca".
You can test by running these export commands at the Linux prompt.
The which command is your friend
which emca
/u01/app/oracle/product/11.2.0.2/bin/emcaBest Regards
mseberg
Edited by: mseberg on Feb 29, 2012 2:52 PM

EM Configuration issue : file not found

I have installed Oracle 10g db on Linux & my Enterpise Manager Url is not working
When I give a command emctl dbconsole start ,I get the an error EM Configuration issue : file not found
Help is appreciated.
Savitha

Did you ever get an answer for this? I am experiencing teh same error after running the upgrade script.

[EPM Configuration] OracleDB - OC4J Configuration issue .... not found

Hello,
after analysing endlessly the existing workarounds for this problem, i conclude that mine is not posted yet.
Intro
In order to install EPM, i had to install Oracle Database 11g. After the installation, an error ocurred stating that configurations were not saved and i could run manually "ECMA.bat" later.
I tried to configure it by creating environment variables such as:
- ORACLE_SID
- ORACLE_HOSTNAME
- ORACLE_UNQNAME
So far, i haven't tried to executed ECMA.bat for the last time, since I am quite sure that i will fail due to not recognizing the hostname.
The issue
Whili trying to make sure that the database is correctly configured, i tried to access to the webpage, unsuccessfully.
Then i found my problem in the forums:
When i type in CMD:
--> (I type)
C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1>emctl status dbconsole
--> (returns)
OC4J Configuration issue. C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1/o
c4j/j2ee/OC4J_DBConsole_HPCM.lab.pt_orcl not found.
In fact there was no folder with that name, nor something like "/OC4J_DBConsole_localhost_orcl" as many posts suggests.
I only have folders like:
- "home"
- "oc4j_applications"
- "OC4J_DBConsole"
- "OC4J_Workflow_Component_Container"
- "OC4J_Workflow_Management_Container"
- "utilities"
- "deploy_db_wf"
Some posts suggests me to change my /driver/etc/host file, but i think my current file is correct:
--> (Content of host gile)
127.0.0.1 localhost
XX.XXX.XXX.XXX HPCM.lab.pt
Honestly, i am out of ideas and i wish any experienced colleague could give me a hint.
Thanks in advance

Hi,
It is worth having a look at the following document on Oracle support.
Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole_<HOSTNAME>_<DBNAME> not found *[ID 555218.1]*
Linux 64bit DBConsole Fails With "OC4J Configuration issue cannot find /oc4j/j2ee/oc4j_DBConsole_..." *[ID 462325.1]*
Thanks,
HyperEPM

How to configure DSN in Linux for use in Essbase?

Hello everyone,
Can anyone help me out about how to create a DSN in Linux to load data from Oracle into Essbase?
Configuration:
Oracle 10g R2 installed on the same box as Essbase (11.1.1.1)
OS: RedHat Enterprise Linux 5.0
(Since no DSN is configured, I am getting an error "No data sources defined. Please create one to continue" every time I try the 'Open SQL' option in a rule file)
Thanks,
Sayantan

I am no expert on this subject, mind you, but I did recently work with Oracle support regarding an ODBC issue. My issue was primarily with a Teradata ODBC connection, but while we were looking at the .odbc.ini, he helped me fix my Oracle connection as well.
He mentioned that we were connecting with the 'Oracle Wire Protocol', and my Oracle ODBC description in .odbc.ini looks like below. I'm not sure what all the entries are, but I do know that Driver, Hostname, SID, and Portnumber are mandatory (there may be other mandatory entries as well, should be some documentation somewhere on it)
Here is my .odbc.ini definition for an Oracle Wire Transfer database connection
[LBR_FCT2]
QEWSD=39264
Driver=/opt/hyperion/common/ODBC/Merant/5.2/lib/ARora22.so
Description=Merant 5.2 Oracle
ApplicationUsingThreads=1
Hostname=ora-godev2a
SID=godev2a
PortNumber=6364
ArraySize=60000
CatalogIncludesSynonyms=1
CatalogOptions=0
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=
OptimizeLongPerformance=0
Password=
ProcedureRetResults=0
UseCurrentSchema=1

Configuration Issue in User Mapping ..

Hi,
Pls help resolve this issue..
When i go to " UserMapping " option using the "Personalize " link , i get the following error msg..
"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
Also , if i go thru "User Administration -> User Mapping "
then it says,
--"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system .
Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
I am not able to solve this problem..Pls help
Thanks in advance

Hi Venkat,
Here the quick and dirty solution:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
I would rather recommend to install the unlimited strength jurisdiction policy files.
For more info on this, check this thread:
JCE Jurisdiction does not allow Portal to start
Hope this helps,
Robert

Anti-relay filter configuration issues

Configuration issues with the anti-relay filter in Messaging Server 4.1x.
The following information addresses common questions about configuration issues
with the anti-relay filter in Messaging Server 4.1x: 

<OL>
<LI>Question: 
What is the difference between the delivery
and submission
options? 

Answer: 
The submission option
allows specified users to send email to any email address in the world.
These users are typically internal users.

The delivery option
allows specified users to receive email from anybody. These users
are also typically internal users.

A standard filter will appear something as follows: 

# This is the anti-relay config file written by Jay at iPlanet
# The first section sets default conditions
resolvehostnames:0
useauthinfo:0
advertiseauthinfo:1
# This section sets domains to be delivered to by anybody
delivery:*@my.domain.com
# This section sets domains that can send any place
submission:129.12.4.*


<LI>Question: 
The delivery
option works properly. However, why doesn't the
submission option
appear to be allowing emails from specified users to pass through?

Answer: 
The problem with the submission behavior could be due to the setting of the
the resolvehostnames
parameter. If this parameter is turned on
(resolvehostnames:1),
then all entries in this configuration file must be fully qualified
host names. Although wildcards will work, you cannot specify IP
addresses with this configuration setting.


<LI>Question: 
Is it possible to allow people outside of my network to connect to the server
and send mail out?

Answer: 
Yes. To allow outside users to connect to the server and send mail
to any address, without granting the same privilege to the rest of the world,
activate the authenticated SMTP portion of the filter via the
useauthinfo option.
Setting this parameter to "1" (i.e., useauthinfo:1
) will require a user who is not in a
submission address and who is attempting to send email to an address not in
the delivery range to authenticate with a user ID and password.
</OL>

For additional information on the anti-relay filter, please refer to the
Messaging Server 4.1 Administrator's Guide at 

http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/ubefiltr.htm#1073677

Prashant:
Are you using a UBE filter to configure domain-based anti-relayinging? We had better luck with the anti-relay plug-in. There is some info on this (for 4.15) at
http://docs.sun.com/source/816-6044-10/ubefiltr.htm#1069973
You have to enable the plug-in using configutil, per the above. The anti-relay plug-in is controlled by antirelay.conf. Be aware that the pattern matching rules are very limited, and not well documented. Fortunately, the source code to the plug-in is included, and you can see what it is doing. To pass the tests we had to add a hard-coded test for a "%" in the source and recompile:
*** antirelay.c.orig Thu Oct 31 04:42:13 2002
--- antirelay.c Thu Oct 31 04:22:07 2002
*** 934,939 ****
--- 934,940 ----
* Weight must be non-zero to begin with so that matches on just "*"
* will work.
+ if( strchr(text,'%') != NULL ) return ABORT;
weight = TRUE;
for ( ; *p; text++, p++) {
if (*text == '\0' && p != '')
Not a really elegant hack, but we didn't need a fully functional regex engine.

Profit cebter and copany code configuration issue

i am making one sales order in which the item number level when i put profit center GB03100004 earlier i was getting company
code in profit segment as GB03, but now i am getting as GB01.
is this related to any configuration issue, please let me know.

Hi,
Goto the T.Code KE53.
Enter the Controlling area.
Enter the profit centre.
Click on Company Codes.
Check for which company code the field "Assigned" is ticked.
Please check with your FICO consultant for more information and modifications.
Regards,
Krishna.

EM Configuration issue.

I have installed grid agent on different server. When i ran emctl status agent i am getting below error.
EM Configuration issue. /u01/app/oracle/product/10g/hostname.com_ORCL.
OS is AIX
Thanks in advance...

I am in AGENT_HOME.You are under Agent installation that's one thing. You also need to make sure your environment variable ORACLE_HOME point to AGENT_HOME not the database installation.

Lync 2013 to Exchange 2013 Oauth problem - Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer

Hi,
I am having a problem getting OAuth to work from Exchange 2013 to Lync 2013.
I have read and following the instructions online and cannot see what I am doing wrong.
On the Exchange 2013 server, I get the following error when I run:
Test-OAuthConnectivity -Service EWS -TargetUri
https://exchserver2.domainname.local/ews/ -Mailbox "Jack"
RunspaceId : 920118a3-6ab2-45dc-9b68-de68133de95e
Task : Checking EWS API Call Under Oauth
Detail : The configuration was last successfully loaded at 01/01/0001 00:00:00 UTC. This was 1059263714 minutes
ago.
The token cache is being cleared because "use cached token" was set to false.
Exchange Outbound Oauth Log:
Client request ID: 19ad80f6-7751-429f-aac5-e802105fbbc6
Information:[OAuthCredentials:Authenticate] entering
Information:[OAuthCredentials:Authenticate] challenge from
'https://exchserver2.domainname.local/ews/Exchange.asmx' received: Bearer
client_id="00000002-0000-0ff1-ce00-000000000000",
trusted_issuers="[email protected]",Negotiate,NTLM
Information:[OAuthCredentials:GetToken] client-id: '00000002-0000-0ff1-ce00-000000000000', realm: '',
trusted_issuer: '[email protected]'
Information:[OAuthCredentials:GetToken] start building a token for the user domain 'domainname.co.uk'
Information:[OAuthTokenBuilder:GetAppToken] start building the apptoken
Information:[OAuthTokenBuilder:GetAppToken] checking enabled auth servers
Error:[OAuthTokenBuilder:GetAppToken] unable to continue building token; no locally configured issuer
was in the trusted_issuer list, realm from challenge was also empty. trust_issuers was
[email protected]
Error:The trusted issuers contained the following entries
'[email protected]'. None of them are configured locally.
Exchange Response Details:
HTTP response message:
Exception:
System.Net.WebException: The request was aborted: The request was canceled. --->
Microsoft.Exchange.Security.OAuth.OAuthTokenRequestFailedException: The trusted issuers contained the
following entries '[email protected]'. None of them are
configured locally.
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppToken(String applicationId, String
destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain)
at Microsoft.Exchange.Security.OAuth.OAuthTokenBuilder.GetAppWithUserToken(String applicationId,
String destinationHost, String realmFromChallenge, IssuerMetadata[] trustedIssuersFromChallenge, String
userDomain, ClaimProvider claimProvider)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.GetToken(WebRequest webRequest,
HttpAuthenticationChallenge challengeObject)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.Authenticate(String challengeString, WebRequest
webRequest, Boolean preAuthenticate)
at Microsoft.Exchange.Security.OAuth.OAuthCredentials.OAuthAuthenticationModule.Authenticate(String
challenge, WebRequest request, ICredentials credentials)
at System.Net.AuthenticationManager.Authenticate(String challenge, WebRequest request, ICredentials
credentials)
at System.Net.AuthenticationState.AttemptAuthenticate(HttpWebRequest httpWebRequest, ICredentials
authInfo)
at System.Net.HttpWebRequest.CheckResubmitForAuth()
at System.Net.HttpWebRequest.CheckResubmit(Exception& e, Boolean& disableUpload)
at System.Net.HttpWebRequest.DoSubmitRequestProcessing(Exception& exception)
at System.Net.HttpWebRequest.ProcessResponse()
at System.Net.HttpWebRequest.SetResponse(CoreResponseData coreResponseData)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Monitoring.TestOAuthConnectivityHelper.SendExchangeOAuthRequest(ADUser user,
String orgDomain, Uri targetUri, String& diagnosticMessage, Boolean appOnly, Boolean useCachedToken,
Boolean reloadConfig)
ResultType : Error
Identity : Microsoft.Exchange.Security.OAuth.ValidationResultNodeId
IsValid : True
ObjectState : New
It appears to work fine from Lync 2013 to Exchange 2013.
When I run: Test-CsExStorageConnectivity -sipuri [email protected] -Binding Nettcp -Verbose in Lync 2013 I get a successful outcome:
VERBOSE: Successfully opened a connection to storage service at localhost using
binding: NetNamedPipe.
VERBOSE: Create message.
VERBOSE: Execute Exchange Storage Command.
VERBOSE: Processing web storage response for ExCreateItem Success.,
result=Success, activityId=0bbdc565-4a05-4b57-bf95-0c75488a1ef6, reason=.
VERBOSE: Activity tracing:
2015/01/02 19:15:55.616 Autodiscover, send GetUserSettings request,
[email protected], Autodiscover
Uri=https://exchserver2.domainname.local/autodiscover/autodiscover.svc, Web
Proxy=<NULL>
2015/01/02 19:15:55.616 Autodiscover.EWSMA trace,
type=AutodiscoverRequestHttpHeaders, message=<Trace
Tag="AutodiscoverRequestHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
POST /autodiscover/autodiscover.svc HTTP/1.1
Content-Type: text/xml; charset=utf-8
Accept: text/xml
User-Agent: ExchangeServicesClient/15.00.0516.004
</Trace>
2015/01/02 19:15:55.624 Autodiscover.EWSMA trace, type=AutodiscoverRequest,
message=<Trace Tag="AutodiscoverRequest" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:wsa="http://www.w3.org/2005/08/addressing"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header>
<a:RequestedServerVersion>Exchange2013</a:RequestedServerVersion>
<wsa:Action>http://schemas.microsoft.com/exchange/2010/Autodiscover/Autodiscove
r/GetUserSettings</wsa:Action>
<wsa:To>https://exchserver2.domainname.local/autodiscover/autodiscover.svc</
wsa:To>
</soap:Header>
<soap:Body>
<a:GetUserSettingsRequestMessage
xmlns:a="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<a:Request>
<a:Users>
<a:User>
<a:Mailbox>[email protected]</a:Mailbox>
</a:User>
</a:Users>
<a:RequestedSettings>
<a:Setting>InternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsUrl</a:Setting>
<a:Setting>ExternalEwsVersion</a:Setting>
</a:RequestedSettings>
</a:Request>
</a:GetUserSettingsRequestMessage>
</soap:Body>
</soap:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace,
type=AutodiscoverResponseHttpHeaders, message=<Trace
Tag="AutodiscoverResponseHttpHeaders" Tid="30" Time="2015-01-02 19:15:55Z">
HTTP/1.1 200 OK
Transfer-Encoding: chunked
request-id: 5917d246-64b0-48e2-ad79-f9b6cffb5bea
X-CalculatedBETarget: exchserver2.domainname.local
X-DiagInfo: EXCHSERVER2
X-BEServer: EXCHSERVER2
Cache-Control: private
Content-Type: text/xml; charset=utf-8
Set-Cookie: ClientId=FTFXWUQWWRJVBMNBG; expires=Sat, 02-Jan-2016 19:15:55 GMT;
path=/;
HttpOnly,X-BackEndCookie=actas1(sid:S-1-5-21-3691024758-535552880-811174816-113
5|smtp:[email protected]|upn:[email protected])=u56Lnp2ejJqBx8jIn
sqbxpvSz8rHx9LLzp7O0sbOzcnSzcqcmZqem8aempmcgYHNz87K0s/N0s/Oq87Gxc7KxcrK;
expires=Sun, 01-Feb-2015 19:15:55 GMT; path=/autodiscover; secure; HttpOnly
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
X-FEServer: EXCHSERVER2
Date: Fri, 02 Jan 2015 19:15:55 GMT
</Trace>
2015/01/02 19:15:55.704 Autodiscover.EWSMA trace, type=AutodiscoverResponse,
message=<Trace Tag="AutodiscoverResponse" Tid="30" Time="2015-01-02 19:15:55Z"
Version="15.00.0516.004">
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:a="http://www.w3.org/2005/08/addressing">
<s:Header>
<a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/exchange/2010/Autodiscover/Au
todiscover/GetUserSettingsResponse</a:Action>
<h:ServerVersionInfo
xmlns:h="http://schemas.microsoft.com/exchange/2010/Autodiscover"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<h:MajorVersion>15</h:MajorVersion>
<h:MinorVersion>0</h:MinorVersion>
<h:MajorBuildNumber>1044</h:MajorBuildNumber>
<h:MinorBuildNumber>21</h:MinorBuildNumber>
<h:Version>Exchange2013_SP1</h:Version>
</h:ServerVersionInfo>
</s:Header>
<s:Body>
<GetUserSettingsResponseMessage
xmlns="http://schemas.microsoft.com/exchange/2010/Autodiscover">
<Response xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>NoError</ErrorCode>
<ErrorMessage />
<UserResponses>
<UserResponse>
<ErrorCode>NoError</ErrorCode>
<ErrorMessage>No error.</ErrorMessage>
<RedirectTarget i:nil="true" />
<UserSettingErrors />
<UserSettings>
<UserSetting i:type="StringSetting">
<Name>InternalEwsUrl</Name>
<Value>https://exchserver2.domainname.local/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsUrl</Name>
<Value>https://exchserver2.domainname.co.uk/EWS/Exchange.asmx</Value>
</UserSetting>
<UserSetting i:type="StringSetting">
<Name>ExternalEwsVersion</Name>
<Value>15.00.1044.000</Value>
</UserSetting>
</UserSettings>
</UserResponse>
</UserResponses>
</Response>
</GetUserSettingsResponseMessage>
</s:Body>
</s:Envelope>
</Trace>
2015/01/02 19:15:55.704 Autodiscover, received GetUserSettings response,
duration Ms=88, response=NoError
2015/01/02 19:15:55.706 Lookup user details,
sipUri=sip:[email protected], [email protected],
sid=S-1-5-21-3691024758-535552880-811174816-1135, [email protected],
tenantId=00000000-0000-0000-0000-000000000000
VERBOSE: Items choice type: CreateItemResponseMessage.
VERBOSE: Response message, class: Success, code: NoError.
VERBOSE: Item: Microsoft.Rtc.Internal.Storage.Exchange.Ews.MessageType, Id:
AAMkADAwNWZkZWI0LWM5NGYtNDUxNy05Nzk3LWZhZjRiY2Y4MTU4NwBGAAAAAADLP1MgTEXdQ7zQSlb
qPl++BwBauhRZTfLbTYZ+hBWtK784ANcdmUYqAACSqIurRqgYSZwMhT/IBw89AACnT6G9AAA=,
change key: CQAAABYAAACSqIurRqgYSZwMhT/IBw89AACnip6b, subject: , body: .
VERBOSE: Is command successful: True.
Test passed.
All my certificates on the Exchange 2013 and Lync 2013 servers are from my local CA.
I use APP with the public certificates as my reverse proxy for people connecting from outside the network.
In Lync, the OAuthTokenIssuer certificate created through the Lync deployment wizard is issued to domainname.local (my primary sip domain) and the Subject Alternative names include domainname.co.uk
I then exported this certificate to the Exchange Server and use the Set-AuthConfig to use this certificate for OAuth.
from what I read this was what I was supposed to do.
is this correct?
I have tried so many things I don't know what do to next.
Should the OAuth certificate in exchange be the one exported from Lync?
In Lync, should the OAuthTokenIssuer certificate include the servername or lyncserver.domainname.local or just be domainname.local like it is at the moment?
thank-you
jack

Thomas,
thanks for giving this the time. I have run the Configure-EnterpriseApplication.ps1 script following by remove-PartnerApplication so many times that I was wondering if there are other setting that
Configure-EnterpriseApplication.ps1 creates that aer not removed when you run
remove-PartnerApplication.
is there a way to completely remove everything that is confirmed when you run
Configure-EnterpriseApplication.ps1 so I can run Configure-EnterpriseApplication.ps1 without there being any configurations left from when I previously run that command?
thanks
jack
[PS] C:\Windows\system32>Get-PartnerApplication |fl
RunspaceId : cb2fb328-769d-4b32-8b7b-1fa35e2994f5
Enabled : True
ApplicationIdentifier : 00000004-0000-0ff1-ce00-000000000000
CertificateStrings : {MIIGcDCCBVigAwIBAgITPgAAARIHL+ig32UAAQAAAAABEjANBgkqhkiG9w0BAQUFADBcMRUwEwYKCZIm
iZPyLGQBGRYFbG9jYWwxHTAbBgoJkiaJk/IsZAEZFg1HdWlkZUNsb3RoaW5nMSQwIgYDVQQDExtHdWlkZ
UNsb3RoaW5nLUFQUFNFUlZFUjEtQ0EwHhcNMTUwMTEwMTIxODIzWhcNMTcwMTA5MTIxODIzWjB7MQswCQ
YDVQQGEwJHQjEPMA0GA1UECBMGTG9uZG9uMQ8wDQYDVQQHEwZMb25kb24xHzAdBgNVBAoTFkd1aWRlIEN
sb3RoaW5nIExpbWl0ZWQxCzAJBgNVBAsTAkhRMRwwGgYDVQQDExNHdWlkZUNsb3RoaW5nLmNvLnVrMIIB
IjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAyzDzaLsjJfktsbwIJ998ihsZM/0rKGdIt8rIx00oc
HA7w0uVyz2UqnP9a8uRi6HkA7djbynlmGG0hKSUUQngXxz7q2dY6q9rcY5Rw2mJOMeppounx44FFp4+4e
5HQKviLTYo+3DBGIR0mYDqxanKPS00d0f7HDLvmVb90hjdrbE372JBdcNNHs2OHRqg37bN2fAbwd22c9x
2kvi0rESFnr+KcIGECVInCTHLJ7fwVqvi4hvRqtz7KLZsMXprpgeVDs45EMMRtwJ5Hw8uZR4CFz4dHSlo
dIVgDPn8Ns2vGhcUK0JU4WkDbjnqo1SJzHlqtNjiu//wGcn77PAiM0yhyQIDAQABo4IDCjCCAwYwCwYDV
R0PBAQDAgWgMCEGCSsGAQQBgjcUAgQUHhIAVwBlAGIAUwBlAHIAdgBlAHIwEwYDVR0lBAwwCgYIKwYBBQ
UHAwEwHQYDVR0OBBYEFOY3whPicRAXNsTDSIg3FexpaCKdMHUGA1UdEQRuMGyCH0x5bmNTZXJ2ZXIyLkd
1aWRlQ2xvdGhpbmcuY28udWuCH0x5bmNTZXJ2ZXIyLkd1aWRlQ2xvdGhpbmcubG9jYWyCE0d1aWRlQ2xv
dGhpbmcuY28udWuCE0d1aWRlQ2xvdGhpbmcubG9jYWwwHwYDVR0jBBgwFoAUDHst3gUSMGwvkiNTPavmi
UEWgtQwggEuBgNVHR8EggElMIIBITCCAR2gggEZoIIBFYaBzWxkYXA6Ly8vQ049R3VpZGVDbG90aGluZy
1BUFBTRVJWRVIxLUNBLENOPURvbVNlcnZlcjIsQ049Q0RQLENOPVB1YmxpYyUyMEtleSUyMFNlcnZpY2V
zLENOPVNlcnZpY2VzLENOPUNvbmZpZ3VyYXRpb24sREM9R3VpZGVDbG90aGluZyxEQz1sb2NhbD9jZXJ0
aWZpY2F0ZVJldm9jYXRpb25MaXN0P2Jhc2U/b2JqZWN0Q2xhc3M9Y1JMRGlzdHJpYnV0aW9uUG9pbnSGQ
2h0dHA6Ly9jcmwuZ3VpZGVjbG90aGluZy5sb2NhbC9jcmxkL0d1aWRlQ2xvdGhpbmctQVBQU0VSVkVSMS
1DQS5jcmwwgdUGCCsGAQUFBwEBBIHIMIHFMIHCBggrBgEFBQcwAoaBtWxkYXA6Ly8vQ049R3VpZGVDbG9
0aGluZy1BUFBTRVJWRVIxLUNBLENOPUFJQSxDTj1QdWJsaWMlMjBLZXklMjBTZXJ2aWNlcyxDTj1TZXJ2
aWNlcyxDTj1Db25maWd1cmF0aW9uLERDPUd1aWRlQ2xvdGhpbmcsREM9bG9jYWw/Y0FDZXJ0aWZpY2F0Z
T9iYXNlP29iamVjdENsYXNzPWNlcnRpZmljYXRpb25BdXRob3JpdHkwDQYJKoZIhvcNAQEFBQADggEBAD
87GUPi02czEMO2Op0CeKBBpGwsfjYR9+RlC2uKAoH8PbWAxYNP3Ke6BtPeFy+95GGAJd5Z0+6LpO/AagA
+zeY/tocZQjy0pYaU4/TPZgD+ZB/8sU982msu+8waO316ipBcf/87n9ZW3Jjk5DcVbtwrZErrGRe9DEn8
QArN0jroLfaRtbDumse1Lp76+dxFuVhlLWcUXtIKaxm+UU9DS94EwJMtN54lDm3EG6hVdiGUR7TYqZU0K
HGm7HciIhuO+2rhAazOBiIAAW6wZRUpFKZONSVD6bKrQCzL12LvynQ7XC6Itgr4JGzNCmoN43dXwVCkWo
amTDdZY4h+QBqUvvY=}
AuthMetadataUrl : https://lyncserver2.domainname.local/metadata/json/1
Realm : domainname.local
UseAuthServer : False
AcceptSecurityIdentifierInformation : True
LinkedAccount : domainname.local/Users/LyncEnterprise-ApplicationAccount
IssuerIdentifier :
AppOnlyPermissions :
ActAsPermissions :
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
DistinguishedName : CN=LyncEnterprise-786f61476b634278a3c9b9e4ec08b660,CN=Partner
Applications,CN=Auth Configuration,CN=domainname,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domainname,DC=local
Identity : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
Guid : 07495125-ccd4-4443-82d9-74fc3b955cdf
ObjectCategory : domainname.local/Configuration/Schema/ms-Exch-Auth-Partner-Application
ObjectClass : {top, msExchAuthPartnerApplication}
WhenChanged : 10/01/2015 17:14:55
WhenCreated : 10/01/2015 17:14:55
WhenChangedUTC : 10/01/2015 17:14:55
WhenCreatedUTC : 10/01/2015 17:14:55
OrganizationId :
Id : LyncEnterprise-786f61476b634278a3c9b9e4ec08b660
OriginatingServer : DomServer2.domainname.local
IsValid : True
ObjectState : Unchanged

Essbase 11.1.2.1 Configuration Issue

Hi ,
I am using windows xp 32 bit processor and installed Essbase 11.1.2.1 successfully.
Configured with one Oracle 11g data base user/Schema working fine and also tried to configure with Two Users/Schemas
in another system workig fine.I heard that if we configure only with one schema Essbase components and Shared
services will conflict.so I would like to know with how many users we have to configure only Hyperion Essbase to get
Better Performance.
Regards
Sekhar.

Hi John,
Then shall i proceed with one user/schema ?
If i proceed with two users/schema is there any problem will come or not ?
Is there any order to configure with one schema ?
like all Foundation components first after Essbase components.
Number of schema/users consideration is not an issue to me but i need best configured
Essbase Server without facing configuration issues in Future.
I had doubt on it may expect clarification ?
Regards
Sekhar

OBPM 10.3.1 Configuration issue in Linux (RedHat Enterprise Linux AS rel 4)

Similar Messages

Maybe you are looking for