OBRM 7.5 Pipeline on Linux testing issue

We are getting the following error while trying to test Pipeline installlation through sample.reg
bin/ifw: An error occurred during creation.
Originator : ifw.Pipelines.TestPipeline.DataDescription
Destination :
Message : ERR_PARSE_DESCRIPTIONS
Arguments : error `./formatDesc/Formats/Solution42/SOL42_V670_OutMap.dsc': line 391: ERROR: failed to parse the output mapping description file
State : false
Severity : CRITICAL
Thread : 2182373440
Could you please suggest where can be the issue.

This is the database installation forum. Pl identify what exact Oracle software you are installing, along with a version number and OS details, so that this post can be moved to an appropriate forum
HTH
Srini

Similar Messages

OES2 SP1 on linux iPrint issues - PCL errors.

Hi,
I've created an iPrint printer for a HP Laserjet 3005 on OES2 SP1 (linux), but I have a few printing issues.
When I use PCL6 drivers all I get is a PCL XL error (IllegalOperatorSequence), and when I use PCL5e drivers, whatever it prints is missing lines (either the last 3-4 lines of a word document or of an excel spreadsheet).
To troubleshoot the problem I've already updated the drivers (by using both universal and non-universal versions), the iPrint agent (i'm now on 5.12), and the iPrint server rpms (novell-iprint-server-6.0.20081215-0.3.i586) but so far nothing has changed.
I have the same exact printer model on a netware 6.5 SP7 and everything works fine, so it seems to be a linux-only issue.
Has anybody else run into the same problem?
Thanks,
Giordano

Hi,
This is a situation with iPrint we have offen even on Netware 6.x ... I don't know how many times I got this kind of issue ... I will give you somes workarounds for this issues with iPrint, but you will need some patient !!!
HP Printers :
1) Use HP Download Manager to upgrade your printer firmware.
2) Don't use Universal Printer Drivers (it worst in some case). Used to lastest drivers for your printer on the HP website.
3) If you used a external HP JetDirect like 170x, 175x, 300x used the LPR Gateway instead of RAW on port 9100.
Redo a printing test with the "buggy" documents and check if it's prints better.
4) If you have a internal JetDirect in the printer used RAW 9100 Gateway, try to print, same problems ? try LRP Gateway ... Redo the tests ...
5) If you still have the problem, but DEFAULT, LPR causes less problem, keep LRP and downgrade your printer drivers. For an exemple : Here, you used a HP 4000 driver for a 4250 series ... Sometimes the original CD of the printer have a better driver then the one offer on the website ... ( I got so many problems with iPrint since 5 years ... ) this will takes time to troubleshoot. Last week I tried 10 differents drivers to make my HP 2300 works properly on OES 2 SP1 Linux.
6) Try to update the RPM on your server with these one ... but wait at the end if no other solutions mentionned before works.
OES 2 SP1 32-bit
ftp://ftp.novell.com/outgoing/novell...317-1.i586.rpm
OES 2 SP1 64-bit
ftp://ftp.novell.com/outgoing/novell...7-1.x86_64.rpm
7) Be sure also you have a XP with the lastest patches and services pack in some cases, this was the solution, but not for every printers. EX : Windows XP SP3 + All Windows Updates installed.
Give me news i'm curious !

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.
Just started happening yesterday.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Do you see any prefs related to that <b>knoxnews<i></i>.com</b> site on the <b>about:config</b> page if you enter that URL in the Filter?
*http://kb.mozillazine.org/about:config
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Oracle Hyperion EPM 11.1.2 Installation on Linux Server Issue

Hi All,
We were downloaded and extracted all zip files (placed in opt/hyperion) from edelivery.oracle.com on LINUX 64 - Server.Before start the installation created new user and assigned to particular group.We are unable to point out the new location for installation, and tried in both GUI and silent installation. In GUI mode the "Browse" option is not highlighted for selecting a new location. It is giving default location eg: some other directory opt/epm.
After finally we found some one already installed EPM 11.1.2 partially in some other directory. But Users are different and Groups (the both users) are same for this installation.
The following error occurred "An existing Middle ware location has been detected .The default location is /opt/epm ".Even we are not able to change the location.
My issue is why it is pointing to older location after deleting all related hyperion folders in /opt/epm.But Seems OraInventory folder files and some files pointing to older location.(We haven't clean that folders).Can i delete those folders as well?
Any inputs would be really appreciated.
Thanks in advance

RahulS wrote:
hi...
Browse button was nt higihlighted coz EPM installer must hv found something frm previous installation.
Now jst delete Oracle folder where u hv installed EPM 11.1.2, delete EPM related things from env nd user profile, nd re start installing.
Cheers...!!!Is your keyboard broke?
Cheers
John
http://john-goodwin.blogspot.com/

Install PeopleTools 8.53 with Linux: psdmtx issue

Folks,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Dabase 11gR1. OS is Oracle Linux 5. I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully.
Now, I am setting up PeopleTools8.53 Database. Because the Install Wizard has problem, I set up PeopleTools 8.53 Database manually using Oracle starter database instance named PT853.
I have run the 5 scripts successfully at SQL> as below:
1) utlspace.sql
2) dbowner.sql
3) psroles.sql
4) psadmin.sql
5) connect.sql
Then, I run "psdmtx" in $/PS_HOME/bin on command line as below:
[user@localhost bin]$./psdmtx -CT ORACLE -CS localhost.localdomain -CD PT853 -CO SYSTEM -CP SYSTEM -CI people -CW people -FP /PS_HOME/modifiedscripts/dbsetup.dms
Its output: error while loading shared libraries: libtrio64.so cannot open shared object file: no such file or directory.
My question is:
How to solve the above error to populate the PeopleSoft Database instance PT853 ?
Thanks.

Folks,
The issue is solved by myself. Thanks.

EM Testing issue - urgent

I have been using jdev 11.1.1.2.
My EJB service running on dev server which has couple of methods. All the methods have been successfully tested in ejb.
I have created a SOA application.
In the composite.xml added two webservice adaptor and one mediator. In the mplan I have mapped routing rules.
Wired exposed services to mediator and mediator to external references.
I can able to test successfully (EM) all the methods except one method.
I opened the recent instances the flow trace shows, service -> completed & mediator component -> running. It never finished running. Always in running state. Why? I could not able to test the particular method.
For other methods, it shows mediator component -> completed.
I have no clue how to fix this issue. Thank you.

Puthanampatti,
You'll probably have more luck on the SOA Suite forum.
John

Ajax Testing issue with e-Tester

I'm new to using Empirix and we are using it to work with a new site that uses Ajax. I have recorded the script fine but there is an issue with the Link that needs to be clicked on that it will either always change or the index will change. I've tried to use a wild card after the number in the link that always stays the same but when I run the tests it always shows "Used secondary attribute 'index' ". Is there a way to get this to stop showing every time or get it to always use this attribute?
Thanks,

Hi,
<br>There are two different issues here:
<ol style="margin-top:0px;">
<li> The link that will be clicked will always change or the index will change.
<li> e-Tester is always using the secondary attribute "index"
</ol>
Let me issue #2 first since its easier to explain.
<h2 style="color:navy"> e-Tester is always using the secondary attribute "index"</h2>
<h2 style="color:navy">* For scripts that are not created yet:</h2>
In order to change the order that e-Tester records the use of attributes you can go to:
<br> <font style='color:navy'>e-Tester » Options » Current Script</font>
<br> Then on the left side of the Current Script Options window go to:
<br> <font style='color:navy'>Recording » Object Identification</font>
<br>The following image presents how the screen looks like:
<br><img src="http://qazone.empirix.com/servlet/JiveServlet/download/25-518-1621-527/upanddown.jpg">
<br>
Notice the bottons with arrows that are on the right side of the window. Use those to determine which attribute should be used first when recording the script.
<h2 style="color:navy">* For existing scripts:</h2>
Go to the page where resides the action of clicking the script, expand the page, <font style='color:navy'>right click on the Address Node</font> and select properties(a new window will appear), double click on the action that is making the click to the link (a new window called Event Properties will appear). In this new window click on the Attributes tab. The following image presents how the Event Properties window looks like:
<br><img src="http://qazone.empirix.com/servlet/JiveServlet/download/25-518-1621-528/upanddownattributestab.jpg">
<br>Notice the bottons with arrows that are on the right side of the window. Use those to determine which attribute should be used first when playing back the script.
<br><br>I will create another post in order to answer the other issue. I need to organize my ideas.
<br><br>Regards,
<br>Zuriel

Testing issue

Hey, I was installing gnome-network-manager from testing, and I may have stumbled upon a slight glitch, it seems that many of the files (all relating to dhclient files) are already on the system. I belive this has to do with the dhcp/dhclient packages (not sure which one, I will check when I get home) and the dhcdbd package conflicting. I will look into this further when I get home. I tried to file a bugreport, or at least sign up so that I could file a bug report if it became obvious that it was a bug (I am not sure that it is, all that is needed is that dhcp/dhclient may need to be added as a conflicting package.) In any case I just wanted to post to see if anyone else was having this problem, and to find out how to subscribe to file for Bugs.

Hi,
<br>There are two different issues here:
<ol style="margin-top:0px;">
<li> The link that will be clicked will always change or the index will change.
<li> e-Tester is always using the secondary attribute "index"
</ol>
Let me issue #2 first since its easier to explain.
<h2 style="color:navy"> e-Tester is always using the secondary attribute "index"</h2>
<h2 style="color:navy">* For scripts that are not created yet:</h2>
In order to change the order that e-Tester records the use of attributes you can go to:
<br> <font style='color:navy'>e-Tester » Options » Current Script</font>
<br> Then on the left side of the Current Script Options window go to:
<br> <font style='color:navy'>Recording » Object Identification</font>
<br>The following image presents how the screen looks like:
<br><img src="http://qazone.empirix.com/servlet/JiveServlet/download/25-518-1621-527/upanddown.jpg">
<br>
Notice the bottons with arrows that are on the right side of the window. Use those to determine which attribute should be used first when recording the script.
<h2 style="color:navy">* For existing scripts:</h2>
Go to the page where resides the action of clicking the script, expand the page, <font style='color:navy'>right click on the Address Node</font> and select properties(a new window will appear), double click on the action that is making the click to the link (a new window called Event Properties will appear). In this new window click on the Attributes tab. The following image presents how the Event Properties window looks like:
<br><img src="http://qazone.empirix.com/servlet/JiveServlet/download/25-518-1621-528/upanddownattributestab.jpg">
<br>Notice the bottons with arrows that are on the right side of the window. Use those to determine which attribute should be used first when playing back the script.
<br><br>I will create another post in order to answer the other issue. I need to organize my ideas.
<br><br>Regards,
<br>Zuriel

Captivate 5 SCORM 2004 3rd Edition ADL Testing Issues

I have published a project from Adobe Captivate 5 and am currently trying to get it through the Advanced Distributed Learning (ADL) Sharable Content Object Reference Model (SCORM) 2004 3rd Edition Conformance Test Suite. I was able to pass the first part: the Content Package Conformance Test and solve the initial errors I was experiencing. However, I now have a new set of errors relating to the Sharable Content Object (SCO) Run-Time Environment (RTE) Conformance Utility Test. It appears that they all stem from:
ERROR: The Terminate() method was never successfully called.
Here is the detailed SCO test log:
Attempting to Launch SCO C:\Documents and Settings\Administrator\Desktop\offender_transportation6\offender_transportation.html
Commit("") has been called
ERROR: The Communication Session is NOT initialized
ERROR: The SCO called the API methods out of order
ERROR: Commit Before Initialization
Terminate("") has been called
ERROR: The Communication Session is NOT initialized
ERROR: An invalid Terminate() call was made
ERROR: The SCO called the API methods out of order
ERROR: Termination Before Initialization
ERROR: The Terminate() method was never successfully called
ERROR: The SCO is SCO RTE 1.0 Non-conformant
The project is currently set to issue a completion status to the LMS after 22 slides have been viewed. Then the project should output the Quiz Results and Slide Views to the LMS. For Project End Options I have tried both: Stop Project and End Project. I haven't been able to find any other settings in Adobe Captivate that relate to this Terminate problem.
Can anyone give me some insight into what could be causing this error?

As I tested, Captivate really cannot support 3rd Edition.
I'm not sure what's the differences between 2nd and 3rd
Edition, but I found that Articulate's '09 series (
http://www.articulate.com/products/quizmaker-publishing.php)
outputs these two editions separately.
I hope Capative could update the module to treat 3rd
specially.
William Peterson
eLearning Master
http://www.sameshow.com/blog/

BT Speed Tester Issue

I often use the BTW Performance test to see what my BT Profile is.
My PC is running Windows 8.1 Pro with IE11 and my laptop is running Windows 7 Pro with IE 11. (and FireFox 30).
Both machines have the latest version of Adobe Flash Player (both the IE and Firefox versions) and Sun Java installed. All the Microsoft updates are also installed.
I have recently upgraded from Infinity 1 to Infinity 2. (Past the 10 days since upgrade).
I can run the 1st part of the speed tester with no problems, but when I run the further diagnostics, it starts running then each time it displays the same error message "Your speed test has completed and the results are shown above, however during the test an error occurred while trying to retrieve additional details regarding your service. As a result we are unable to determine if the speed you received during the test is acceptable for your service. Please re-run the test if you require this additional information. "
If I re-run the test I still get the same error message. - Both IE and FF give the same error message.
Is this website faulty ?
I have tried the usual Browser fixes of trusting the website and running it in Compatability Mode, but the same error exists.
Both my machines are running as a 'standard user', that is locked down with no Admin Rights.
Any one else having the same issues, or is the site faulty ?

This is normally a site problem and often happens. Continually trying will usually get the site to work
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

E-Test Issues

Hi,
Iam using the e-TEST 8.20 version for testing our web based application. Iam facing some issues while palying back the recorded scripts. the errors are like Navigation failed, Times out..etc. The tool is not specifying detalied cause for the error. May be i need to change some settings, i don't know. What i observed was the errors are not the same each and every time you palyback the script. Sometimes one particular button is not clicked and sometimes some textfield failed due to not filling with values. I had used QTP earlier and was able to see the root cause for why the object is failing. May be because of this tool is working on HTTP level recording, i'm not able to see why the script is failing. Please help me if you have any suggestions/ Comments on this. Thanks in advance.

A Navigation failed usually occurs because eTester cannot find a object in the page that it needs to interact with in order to progress. For example, it may be that a link is not there or it cannot be located. Look on the page before the Navigation failed error occurs and you can look at the events in the Address Properties node - you may need to use the objects index as the location mechanism.
Jamie

Cache Connectivity Test Issue..:-)

Hi XI Guru's ,
Currently i am working on a scenario JDBC-RFC-JDBC scenario using a BPM.
Issues i am facing....
1. I have made the polling interval from source table to 10 secs, but i can see table is not getting polled in 10 secs.
2. On running Cache Connectivity Test I found that It is not working perfectly : as i can see yellow and red symbols frequently..
3. Sometimes when XI is able to pick the record it is throwing error in Mapping Runtime
"Runtime Exception during application Java mapping com/sap/xi/tf/_MM_REQ_"..
I checked n no of times in Test Mapping it is working fine...
Mapping is between Async Req Object with RFC's import parameters...on drilling down further i figured out that values are not getting passed to this RFC ...as when i passed the constant values to RFC it is working fine...
So i am not sure where the the problem ?
<b>Currently i am working on PI 7.0 and SP 9.0 ...ans also we are not using FQDN now...</b>.

Hi Santhosh ,
<i>
              on drilling down further i figured out that values are not getting passed to this RFC ...as when i passed the constant values to RFC it is working fine...</i>
<i>On passing the constant values in mapping to RFC the scenario is moving smoothly its only the record being picked by JDBC sender adapter not getting passed to RFC through BPM....</i>
                      Yes. You are having issue at Mapping (desing ) side . So, Even if your JDBC Sender picks up the data it won't send to RFC. Obsolutly, your constant value passed to RFC will woks fine .
                   So, Have you tested like what i have suggested , like copying the Payload and test the mapping ?
                      If you are getting the java.lang.NullPointerException . I am 100% sure your mapping is wrong . Please chek the MAPPING ONCE AGAING !
                 Are you getting the Target message structure when you are passing the source etructure ? Executed successfully Message ?
                  Please chek the Mapping once again . Test teh Interface Mapping too.
Assing points if you found helpful
Regards.,
V.Rangarajan

HANA XS - How to fix Inactive Testing issue of items not loading (when using the cookie)

Is anyone else having issues with the inactive testing using the cookie (sapXsDevWorkspace)? My team has abandoned using it because it is causing us a lot of trouble. It initially worked well for a few hours, but eventually it stopped loading resources. We got errors loading the SAP js libs or even the newly commited ( but not activated) code changes.
I have seen the feedback on SCN post http://scn.sap.com/thread/3517042 but we cannot seem to fix the issue of the system not loading things. I am on version SPS7 (1.00.70.00.386119) on AWS and I have seen it work for a short period then it seems to get flaky and stop working. I don't understand what is causing the error to occur as I cannot make it do the same thing twice.
Here are some screenshots:
Cookie defined in Chrome
Repository Name with my user:
This is the result:
Sometimes it loads more of the files and fails later:
I verified that I logged in under the same user and the cookie name. The system has developer_mode set to true. Is there something we're missing?
Jim Giffin.

Hi Jim, Hi Matthias
we are facing the exact same problem with our project.
Jim, we had the same phenomenon that it worked for 1-2 reloads and then stopped at all.
After looking into it, I figured out, that the browser was using cached files from all resources except from the "inactive" new files, which we could access with the cookie. This made it work, however, when we refreshed again, the browser eventually removed its cache and tried to load inactive versions from files that didn't had any.
We ended up in empty responses (no content, no headers)
We are really looking forward to find some answers here, as it constantly causes trouble to work with multiple developers on the same activated code base.
Any input or suggestions are appreciated.
Best Regards,
Axel

Catalyst 3560 PoE Port ASIC Port Loopback Test Issue

Hi,
We have a switchports issue in this specific switch, wherein some switchports cannot be
turned on. Whenever we try to perform a (shut/no shut) on the interface, it shows this
message:
Fa0/1 can't be brought up because it failed POST in loopback test
We also tried to 'reload' this switch, but still those switchports remains down. When we
transfer a device from a defective switchport to a working switchport, the device is working
fine. Thus, the phsyical connection or host set-up is OK.
Here's the output from "sh post" command:
Stored system POST messages:
Switch 1
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC PortASIC interface Loopback Tests : Begin
POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: Failed PortMacLoopback Packet Receive asic_index 1 port_hardware_index 2
POST: Failed PortMacLoopback Packet Receive asic_index 1 port_hardware_index 3
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 2
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 3
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 4
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 5
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 10
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 11
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 12
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 13
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 18
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 19
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 20
POST: Failed PortPhiLoopback Packet Test asic_index 1 port_hardware_index 21
POST: PortASIC Port Loopback Tests : End, Status Passed
Thanks in advance for your replies.
Brgds,

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-fareast-font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
This is the wrong forum to post to for this issue but I can still give you insight. Basically when the switch is booting it's going through Power On Self Test (POST). The failures you're seeing basically mean this section of switch ports which are connected to an ASIC are not functional and or have failed. This is a physical hardware problem and can not be resolved. At this point you'll need to open up a TAC case for RMA.

W540 Linux display issues

I am running a W540 with a K1100M and the hi-res display.
I have it dual booting linux (Opensuse 13.1 x64) and Windows 7.
I have been unable to get the NVidia drivers to install and work correctly, either with bumblebee or without.
At this point, I would be content to use the nvidia chip all the time and skip the power savings. When the OS installs it loads up the opensource driver and the intel driver. The internal display functions correctly, and I can connect two external monitors to it with no issues plugged into the thunderbolt and vga connectors. (Quite amazing, as I have never seen the nouveau driver work so well.)
The bad thing about the nouveau driver is the performance and power usage. It runs poorly, and uses lots of power for anything beyond normal desktop usage and youtube. Futher, using the default install, the monitors do not work when connected to the dock station. They are not seen.
Has anyone managed to get this machine work on either just the nvidia chip running all the time, or with bumblebee and multiple monitors?
Thanks!

fbrozovic wrote:
I connected the external monitor while the system was running. On the mDP port, the external monitor would automatically extend the desktop, so I assume that this would be the default when connecting one to the dock too.
The NVIDIA driver version is 319.82; as for the Intel one, I have no idea, as I think the driver for the HD4600 is in the i915 kernel module (not sure here though). (of course the xorg driver isn't in the kernel) the Intel one (xserver-xorg-video-intel) is 2.21.15-1+b2.
My BIOS LCD settings are the default ones:
Boot Display Device - ThinkPad LCD
Video Mode on Dock - Standard (also tried Advanced, didn't help, but external monitors run with the K2100M instead of the HD4600 under Windows)
Discrete GFX Perf Mode - High Performance
Looks like our driver versions aren't going to match up. Those are really old Nvidia drivers, I didn't think they supported the K2100m series. If it works though!
My intel drivers are xf86-video-intel-2.99.910-117.2.x86_64 which is based on 2.99.910 driver from here:http://cgit.freedesktop.org/xorg/driver/xf86-video-intel/
You said that the Advanced didn't help, did it hurt?
(I think mine is running that way now, and I am also running the high performance mode.)

OBRM 7.5 Pipeline on Linux testing issue

Similar Messages

Maybe you are looking for