Obsolete context programs will be regenerated by the system

Hi,
I´ve installed a SRM 7.0 SAP system and when I connect to the system I obtain this :
Note: Obsolete context programs will be regenerated by the system
Message no. 33018
can someone help me ???????
I know that is only a message but I want to remove it .
thanks a lot and best regards, sapera

Hi,
I did it:
1. $sqlplus "/as sysdba"
2. SQL> STARTUP UPGRADE
3. SQL>SPOOL patch.log
4. @?/rdbms/admin/catupgrd.sql
5. SQL> SPOOL OFF
6. SQL> SHUTDOWN IMMEDIATE
9. SQL> STARTUP
10. Run the utlrp.sql script to recompile all invalid PL/SQL packages now instead of when the packages are SQL>@ /oracle/<SID>/102_64/rdbms/admin/utlrp.sql
11. Run the following command to check the status of all the components after the upgrade:
SQL> SELECT COMP_NAME, VERSION, STATUS FROM SYS.DBA_REGISTRY;
12. Stop the sap system
13. start sap system
You can find more information about this error in the Oracle documentation.
If you need more help, please let me know, Sapera

Similar Messages

My ipad 2 will only charge if the system is completely shutdown and it can take up too 7-8 hours to reach 100% 2 hours later I'm down to 12-13% what's wrong with it?

My grandson's IPad 2 won't hold a charge. It will only charge when the system is completely shutdown and it can take up to 8 hours to reach 100%! he's only 5 so he uses it to watch netflixs and playing games but a couple of hours after finally getting a full charge the indicater is down to 12%-13%. Keeping the system plugged up while he's using it doesn't do any good its like its not even plugged up. What could be wrong? Any assistance would be appreciated! I brought the IPad 2 in 2011 and gave it to him in 2013 when I brought myself the IPad Air...so its really not that old to be acting up...

Hi manisnana09,
If you are having issues with charging and capacity on your iPad, you may find the following articles helpful:
iPad: Charging the battery
http://support.apple.com/kb/ht4060
Apple - Batteries - iPad
https://www.apple.com/batteries/ipad.html
If you are still having issues, you may need to have your iPad serviced, or at least evaluated. You may find this page useful:
Service Answer Center - iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Regards,
- Brenden

Hi, I am using an old PC P2 450Mhz, 256 MB Ram. Is ver 3.6.16 ok for my system or will it slow down the system? Thanks

Hi, I am using an old PC P2 450Mhz, 256 MB Ram. Is ver 3.6.16 ok for my system or will it slow down the system? NODD is the anti-virus. I am not happy with IE or goolge as these are taking too much space. Thanks

The system requirements for Firefox 3.6 are:
* Pentium 233 MHz (Recommended: Pentium 500 MHz or greater)
* 64 MB RAM (Recommended: 128 MB RAM or greater)
You exceed the minimum and are just short of the recommended processor. It should run OK but the only way to tell will be to try using it. Note that using add-ons can slow Firefox down, so if you start installing quite a few you may get performance issues.
https://www.mozilla.com/en-US/firefox/3.6/system-requirements/

HT1657 I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

Bex " the program will now terminate" during the save to favorite

Hello everybody,
Ihave a Bw 7.1 system installed with Frontend 720 and bex 700 shared by Citrix.
I have this error "a critical program error as occurred - the program will now terminate" when I try to save as favorite into my Bw system in BEX .
The problem doesn't appear when I do this activity by my PC without Citrix.
Anybody may help me to understand how to solve this issue?
regards
Lopresti

Dear Jelina,
Have you tried to install the latest frontend patches from Marketplace. If not node, I would suggest you to
please upgrade to latest,
Please goto
-> http://service.sap.com/patches
-> Browse our Download Catalog
-> SAP Frontend Components
-> BI ADDON FOR SAP GUI
-> BI 7.0 ADDON FOR SAP GUI 7.20
-> BI 7.0 ADDON FOR SAP GUI 7.20
-> Win32
-> Apply the latest.
For 3.x frontend:
-> http://service.sap.com/patches
-> Browse our Download Catalog
-> SAP Frontend Components
-> BI ADDON FOR SAP GUI
-> BW 3.5 ADDON FOR SAP GUI 7.20
-> BI 3.5 ADDON FOR SAP GUI 7.20
-> Win32
-> Apply the latest.

Why some of my programs will not open after the update to yosemite

Hello
I updated my Macbook Pro to Yosemite. After my upgrade some of my programs do not open, Such as Wireshark. I'm a fairly new user of pc to mac. I know in windows you can go in to the system logs to see what is going on. Does Mac have a similar feature or has anyone experience this issue as well? The same issue happen with Parallels and I reinstalled the program and it worked again. but this one is not working.

Which version of OS X did you upgrade from? Some apps may not be compatible with Yosemite: see Roaring Apps > http://roaringapps.com.
For information on Wireshark and Yosemite, see -> https://ask.wireshark.org/questions/35986/not-able-to-launch-wireshark-on-yosemi te.
Parallels 9 was not working for me, and I had decided to upgrade to 10 when it was released. You can work-around Parallels 9 not working, but version 10 is best for Yosemite.
Good luck,
Clinton
MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

IMac G5 programs will not save, unable in system pref to unlock

Recently I seem to have growing problem with Microsoft Office programs not being able to save without crashing: Exception: EXCBADACCESS (0x0001) Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000008. Other programs dealing with checking the system for software/hardware problems (like TechTool) will start, but the beach ball begins in a few seconds and does not stop spinning ("application not responding").
Following Article HT1199, I tried to create a new user account to test whether my user account was corrupted and when I try to "click the lock to make changes" and it starts "Authenticating..." but the beach ball starts to spin and "application not responding" is what the dock says.
I've repaired permissions several times; I've run the Apple Hardware Test (long version) with no indicated problems; I've changed the admin password using my original CD; I tried moving the Caches folder to the desk top but the copy windows sets at "preparing to copy" and never proceeds further; I've entered the safe mode, without success; some programs seem to continue to work like TextEdit (able to save), Quicken, Safari, etc. It seems I've lost control of my account and my permissions to write from Work and Excel.
Things really seem to start going downhill when I tried to install the free Sophos Anti-Virus Software. I was able to download it, but the install would hang and not continue. Tried the process again and it hanged. Turned off my firewall NetBarrier X4 and tried again, but Sophos hanged during the install. (My wife, on a different machine, did get it to install, but it started interfering with Apple Works, so she turned it off.) I don't know if it was able to install partly and now interferes with me being able to write from programs like Word and prevents me from gaining access to my System Preferences.
Any ideas, or should I just proceed with reinstalling the system and update it to were I am now? (Note I don't want to go any higher than X.4.11 as I have a OS 9 program I need to run and there is no upgrade available.)
Thanks,
John

Miriam,
I'm back. I got all of the files in my user area backup of on an external drive, plus other files.
I was searching in Google for not being able to unlock a user account and found Apple Discussion #2144971 which seemed to help another person when they couldn't unlock their user account. It recommended creating a root account and then creating another user account with admin privileges. I followed the instructions and was able to create a root account and create an other user account with admin privileges, but when I signed into this new account, it was locked and I once again got the beach ball when trying to unlock it. While in root both accounts are unlocked, but once signed on to them they are locked. While in root I tried to use Word, but it still bombs on a save.
Also while in root I could run TechTools and ran all the routines that it would allow. I once again tried to startup using the TechTools CD by holding the C key down on startup, the gray screen came up with the Apple logo and the spinning gear, the CD is turning, but after awhile a circle with a cross-line appears with the gear still turning and I have to push the power button to gain control.
Also while in root, I downloaded Onyx's version for OS10.4 and ran it. (It kept flashing up a window with an Applescript error every once and a while). It didn't find any problems.
In your reply right after referring to Onyx, you said "cleaning User caches..." I assumed then that Onyx did that, but was that something I had to do manually? If so, how?
Did you see my reply about Office database and the link you provided?
Any further ideas? With Onyx not working, is it DiskWarrior time or another utility? Or is it time to think about putting in the original CD's and erasing my hard drive, re-install the system, start the Software Update process, reinstall my Office version and put back all my user folders and data? Any suggestions for this process?
Thanks,
John

Programs will not open. The button in the lower left corner of the screen continuously blinks.

Whenever I open Firefox on my other laptop I cannot get into any programs. The icon in the lower left corner of the screen that lets you know when a program has completed loading just blinks constantly.

Got the exact same problem aswell, finally fed up with it now as i just started up firefox and 14 new windows opened because of this bug, luckily my computer can handle them but someone with a slower processor it would have been a nightmare, needs fixing ASAP.
Reverting back to 3.6.3 until this issue is solved. (link for anyone wanting to do the same below)
http://www.filehippo.com/download_firefox/7345/

Transaction or program which shows SAPS of the system

Hello experts,
Is there any transaction or program or table in SAP system which shows the SAP Application Benchmark for Performance Standards(SAPS) ?
Regards,
Sanket Kelkar

Hello Siva, Hello Sunny,
Thank you for your prompt reply.
I got the answer for my own question. My senior helped me in finding it.
In the SAP Directories, check the Temp directory. There is an Operation Manual file for the sized system. In that file we can see the SAPS.
Transaction AL11 --> DIR_TEMP --> Operation-Manual-<SID>. In this file search for the term SAPS.
I hope this information is useful. Any other inputs are welcome.
Regards,
Sanket Kelkar

MBAM will not auto encrypt the system partition

First after reimaging, I need to use tpm.msc to prepare the TPM, as the TPM is running in reduced functionality. The computer reboots and clears the TPM. After the reboot, the logs no longer show any new errors.
However if the option “Configure the number of noncompliance grace period days for operating system drives” is set to zero; nothing ever happens. There are no errors in the logs.
If “Configure the number of noncompliance grace period days for operating system drives” is unconfigured. The user is prompted to encrypt, if the user choses to encrypt everything works correctly.
We are using HP Probook 6545b notebooks
Below you see the MBAM policy.
I must have missed something in the BIOS or the policy, but what?

I have checked the MBAM node in Event Viewer, policies are applying successfully. We are not using a PIN. I am beginning to believe this is a hardware limitation. As on a newer notebook I only needed to use TPM.msc to manually, prepare the TPM and after
reboot automatic encryption began. I need to solve the issue with manually needing to prepare the TPM.

I downloaded the latest Firefox security update and my computer will no longer access the internet in any fashion, despite the fact that I'm still connected to the internet. Other browsers no longer work either.

Immediately after I downloaded the latest firefox security update my computer will no longer access the internet. I still have a fine wireless connection but Firefox, Internet Explorer, Itunes, and every other program will no longer access the internet, saying there is a connection error. I even tried restoring my system to a previous date but it said that a security program was preventing it from doing so.

What's the security program called? Is it '''Win 7 Security''' by any chance? There's a rogue AV app that will prevent internet access by that name. It comes in many different flavours, but it's basically the same product with different names depending on the operating system its aimed at. See screenshot.
Do you have another computer you can use to download Malwarebytes? Or can you get a friend to download it for you and copy it to a USB drive? Download from here: http://www.malwarebytes.org/products/malwarebytes_free
You can use the USB drive to transfer the program to your own PC and then install it.

Which programs will be included in Creative Cloud?

There seems to be a lot of confusion over which programs will be included in the Creative Cloud subscription. Can anyone clarify?

Thanks Kim, that much I knew.
That page says: "Access to the entire portfolio of Adobe Creative Suite desktop tools, as well as the six Adobe Touch Apps announced at MAX. That means customers will get every tool that is currently in Adobe Creative Suite Master Collection, such as Adobe Photoshop®, InDesign®, Illustrator®, Dreamweaver®, Adobe Premiere® Pro, and After Effects®, as well as innovative new tools that are currently in beta, such as Adobe Edge and Muse."
But it doesn't mention what will happen with programs that aren't currently part of the Master Collection - Captivate, Lightroom, Photoshop Elements & Premiere Elements, to name a few that spring to mind.
Unfortunately all of these announcements are lacking rather a lot of detail, and I was hoping someone closer to the Creative Cloud might have a little more information. Lightroom has been answered by another source, but I'd love to know about the others, particularly Captivate.
No worries, I guess it'll all come out in the wash eventually!

How to find if a program really exists in the system?

Hi,
I want to find the existing programs in the system by an abap program. Which table should I use? TADIR or TRDIR? I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table.
What about trdir? Should I use TRDIR?
Thanks in advance..
MERAL

Thanks for your replies but my main problem is :
" I have seen that there can be cases like a program doesn't exist in the system (se38 says so) but there is an entry in TADIR table." .
In order to find an abap program really exists in the system, I plan to look at both tables, tadir and trdir, and if I find the program in both tables, I will decide that it really exists.
Is it a right approach? What do you think?

My itunes i just down loaded will not connect to the itunes store.

I was trying to authorise my computer when all a sudden I am signing into this program to ask questions but I just downloaded itunes and when promted the iunes program will not connect to the strore. Why is it that i can not locate the authorise this computer option?

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

I have recently download the new pages, but from time to time my computer will revert back to the previous page software what can I do to fix this problem

does anyone have a problem with the new page software? I am currrently running into the same problem with the old pages software re-appearing and any document that I had used with the new update, will not open. The system requires me to attempt to download a new version of page, when the newiest version has aleady been download and has been in operation.
What can I do to fix this problem? I desire to use the new version at all times.
Please help
James

You just have to be particular with which Pages version you are opening the document. use Right click on the document and choose the right version of Pages.

Obsolete context programs will be regenerated by the system

Similar Messages

Maybe you are looking for