Obsolete optimizer error
Hi,
I am trying to import the designer tutorial onto Oracle 10g database and am getting the above error. It seems that the tutorial has got an sql statement somewhere which is telling the database to use the rule based optimizer when 10g uses the cost based optimizer.
If anyone can direct me on how to resolve this problem I will be very grateful.
Thank you.
No, you should use the one on OTN (http://www.oracle.com/technology/products/designer/9i_collateral.htm#tut).
The only other thing I can suggest is that you try using the 10g imp executable in the RON to see if that somehow fixes the problem.
If that also doesn't work, you will have to contact Support and file an RFA.
- Suresh
Similar Messages
-
Main optimizer error - There is already a transaction for the system
Hi Guru's,
I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
'There is already a transaction for the system of this product version'
After this error, it does not proceed further.
There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
Any ideas or solutions most welcome.
MosesAs Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
Best regards,
Joachim -
BPC 4.2 Optimization error (object variable or with block variable not set)
Hi All,
I am getting the following error when I try to optimize application from the front end:
Run-time error '91':
Object variable or With block variable not set
From the back end the optimization works just fine. This is the new application I created from the AppShell. As soon as I created this new application set, I tried to run optimization and I am getting this error. Optimization in the AppShell works just fine. I wonder what the problem is since this is a brand new application set. I tried a few things all day yesterday and day before but in vain.
We are using BPC 4.2 (OutlookSoft CPM). Any help is greatly appreciated, the sooner the better.
Thanks in advance!Depending on your version of 4.2, here are two possible issues and remedys.
Possible issue #1
Do you only have 1 application in the appset? - Add another application.
Possible issue #2
This problem will occur if you have copied 4.2 SP2 Apshell or copied an existing appset.
This happens when a table named tblAdminTaskMessage exists and a stored procedure named INPUTMESSAGE does not exist.
The table and stored procedure are created when you run optimize for the first time and when you make copy of Apshell that has been optimized once, it can copy the table but it cannot copy the stored procedures.
The workaround is to delete the tblAdmintaskMesssage table in SQL Enterprise Manager within the problem appset.
Hope this helps. -
Full Optimize Error - OutOfMemmory in SAP BPC
Hello
Has anyone come across the following error when running a full Optimize from SAP BPC Administration.
Error Message: Exception of type system OutOfMemoryException was thrown.
I've raised a support call but would appreciate any help on knowing why this happens and how I can resolve it.
Many thanks
HinaHello Appu,
Do you have something in default script logic? Revise it in the admin consol Default.LGF inside the application and scripts logic, and delete the code include. Always if you don't need to use it.
By defect SAP BPC include some code there and you must delete it and save the changes.
Regards,
Gabriel Garcia -
Hi,
I don't know if I should make bug report or not. I have found a strange error within a loop iteration up to Integer.MAXVALUE.
Here is the source:
public class problem64bit
* @param args
public static void main(final String[] args)
System.out.println("java.version = \t"
+ System.getProperty("java.version") + " "
+ System.getProperty("java.vm.name") + " ("
+ System.getProperty("sun.arch.data.model") + "Bit)");
System.out.println("OS = \t\t" + System.getProperty("os.name") + " ("
+ System.getProperty("os.version") + ")\n");
booleanInvert(Integer.MAX_VALUE);
booleanInvert(Integer.MAX_VALUE - 1);
booleanInvert(Integer.MAX_VALUE - 2);
private static void booleanInvert(final int max)
System.out.println("BooleanInvert with max = " + max + " iterations");
long timeStart = System.currentTimeMillis();
boolean test1 = false;
boolean test2 = false;
boolean test3 = false;
for (int i = 0; i < max; i++)
test1 = !test1;
for (int i = 0; i < max; i++)
test2 = test2 ? false : true;
for (int i = 0; i < max; i++)
test3 ^= true;
System.out.println("Time: " + (System.currentTimeMillis() - timeStart)
+ "ms");
if (test1 != test2 || test1 != test3)
System.out.println("ERROR: Boolean invert\n\ttest1=" + test1
+ "\n\ttest2=" + test2 + "\n\ttest3=" + test3);
} else
System.out.println("Everything as it should be!");
}The result is different between a x32JRE and a x64JRE
Results on a x32JRE:
java.version = 1.6.0_18 Java HotSpot(TM) Client VM (32Bit)
OS = Windows 7 (6.1)
BooleanInvert with max = 2147483647 iterations
Time: 7812ms
Everything as it should be!
BooleanInvert with max = 2147483646 iterations
Time: 7469ms
Everything as it should be!
BooleanInvert with max = 2147483645 iterations
Time: 8801ms
Everything as it should be!and here are the results on a x64JRE
java.version = 1.6.0_18 Java HotSpot(TM) 64-Bit Server VM (64Bit)
OS = Windows 7 (6.1)
BooleanInvert with max = 2147483647 iterations
Time: 13ms
ERROR: Boolean invert
test1=true
test2=true
test3=false
BooleanInvert with max = 2147483646 iterations
Time: 11ms
Everything as it should be!
BooleanInvert with max = 2147483645 iterations
Time: 0ms
Everything as it should be!as you can see, the result on the x32 JRE is the expected one. The x64 JRE is very fast but there seems to be a nasty bug in the optimization code for the loops because only with Interger.MAXVALUE there is a problem.
What to do now - can anybody reproduce the error and sould i report it as a bug? Is it only in the Win(7) x64 JRE?
greetings
Edited by: GandalfTheWhite on Feb 13, 2010 6:30 AM
Edited by: GandalfTheWhite on Feb 13, 2010 6:38 AM
Edited by: GandalfTheWhite on Feb 13, 2010 6:50 AMHi,
well this is the first time I hear that eclipse uses its own compiler! But nothing is impossible :-) -> as I know now eclipse uses its own incremental compiler :-(.
Here are the javap codes of the two class files (minimized example!)
But I will update my eclipse with the lates stable build an have a look at the problem again. Thx for your help!
eclipse.class
Compiled from "problem64Bit.java"
public class problem64Bit extends java.lang.Object{
public problem64Bit();
Code:
0: aload_0
1: invokespecial #8; //Method java/lang/Object."<init>":()V
4: return
public static void main(java.lang.String[]);
Code:
0: ldc #16; //int 2147483647
2: invokestatic #17; //Method booleanInvert:(I)V
5: ldc #21; //int 2147483646
7: invokestatic #17; //Method booleanInvert:(I)V
10: return
private static void booleanInvert(int);
Code:
0: iconst_0
1: istore_1
2: iconst_0
3: istore_2
4: iconst_0
5: istore_3
6: goto 22
9: iload_1
10: ifeq 17
13: iconst_0
14: goto 18
17: iconst_1
18: istore_1
19: iinc 3, 1
22: iload_3
23: iload_0
24: if_icmplt 9
27: iconst_0
28: istore_3
29: goto 39
32: iload_2
33: iconst_1
34: ixor
35: istore_2
36: iinc 3, 1
39: iload_3
40: iload_0
41: if_icmplt 32
44: iload_1
45: iload_2
46: if_icmpeq 83
49: getstatic #24; //Field java/lang/System.out:Ljava/io/PrintStream;
52: new #30; //class java/lang/StringBuilder
55: dup
56: ldc #32; //String ERROR: Boolean invert\n\ttest1=
58: invokespecial #34; //Method java/lang/StringBuilder."<init>":(Ljava/lang/String;)V
61: iload_1
62: invokevirtual #37; //Method java/lang/StringBuilder.append:(Z)Ljava/lang/StringBuilder;
65: ldc #41; //String \n\ttest2=
67: invokevirtual #43; //Method java/lang/StringBuilder.append:(Ljava/lang/String;)Ljava/lang/StringBuilder;
70: iload_2
71: invokevirtual #37; //Method java/lang/StringBuilder.append:(Z)Ljava/lang/StringBuilder;
74: invokevirtual #46; //Method java/lang/StringBuilder.toString:()Ljava/lang/String;
77: invokevirtual #50; //Method java/io/PrintStream.println:(Ljava/lang/String;)V
80: goto 91
83: getstatic #24; //Field java/lang/System.out:Ljava/io/PrintStream;
86: ldc #55; //String Everything as it should be!
88: invokevirtual #50; //Method java/io/PrintStream.println:(Ljava/lang/String;)V
91: returnconsole.class
Compiled from "problem64Bit.java"
public class problem64Bit extends java.lang.Object{
public problem64Bit();
Code:
0: aload_0
1: invokespecial #1; //Method java/lang/Object."<init>":()V
4: return
public static void main(java.lang.String[]);
Code:
0: ldc #2; //int 2147483647
2: invokestatic #3; //Method booleanInvert:(I)V
5: ldc #4; //int 2147483646
7: invokestatic #3; //Method booleanInvert:(I)V
10: return
private static void booleanInvert(int);
Code:
0: iconst_0
1: istore_1
2: iconst_0
3: istore_2
4: iconst_0
5: istore_3
6: iload_3
7: iload_0
8: if_icmpge 27
11: iload_1
12: ifne 19
15: iconst_1
16: goto 20
19: iconst_0
20: istore_1
21: iinc 3, 1
24: goto 6
27: iconst_0
28: istore_3
29: iload_3
30: iload_0
31: if_icmpge 44
34: iload_2
35: iconst_1
36: ixor
37: istore_2
38: iinc 3, 1
41: goto 29
44: iload_1
45: iload_2
46: if_icmpeq 86
49: getstatic #5; //Field java/lang/System.out:Ljava/io/PrintStream;
52: new #6; //class java/lang/StringBuilder
55: dup
56: invokespecial #7; //Method java/lang/StringBuilder."<init>":()V
59: ldc #8; //String ERROR: Boolean invert\n\ttest1=
61: invokevirtual #9; //Method java/lang/StringBuilder.append:(Ljava/lang/String;)Ljava/lang/StringBuilder;
64: iload_1
65: invokevirtual #10; //Method java/lang/StringBuilder.append:(Z)Ljava/lang/StringBuilder;
68: ldc #11; //String \n\ttest2=
70: invokevirtual #9; //Method java/lang/StringBuilder.append:(Ljava/lang/String;)Ljava/lang/StringBuilder;
73: iload_2
74: invokevirtual #10; //Method java/lang/StringBuilder.append:(Z)Ljava/lang/StringBuilder;
77: invokevirtual #12; //Method java/lang/StringBuilder.toString:()Ljava/lang/String;
80: invokevirtual #13; //Method java/io/PrintStream.println:(Ljava/lang/String;)V
83: goto 94
86: getstatic #5; //Field java/lang/System.out:Ljava/io/PrintStream;
89: ldc #14; //String Everything as it should be!
91: invokevirtual #13; //Method java/io/PrintStream.println:(Ljava/lang/String;)V
94: returnas far as i can see... there a some differences but more could not make out of it.
greeting gandalf
ps here the source for the smaler sample
public class problem64Bit
* @param args
* Arguments
public static void main(final String[] args)
booleanInvert(Integer.MAX_VALUE);
booleanInvert(Integer.MAX_VALUE - 1);
private static void booleanInvert(final int max)
boolean test1 = false;
boolean test2 = false;
for (int i = 0; i < max; i++)
test1 = !test1;
for (int i = 0; i < max; i++)
test2 ^= true;
if (test1 != test2)
System.out.println("ERROR: Boolean invert\n\ttest1=" + test1
+ "\n\ttest2=" + test2);
} else
System.out.println("Everything as it should be!");
}Edited by: GandalfTheWhite on Feb 16, 2010 11:33 AM -
Obsolete method error in the RPD
Hi,
Due to some scenario, I end up building sum(A/B). I have added the parameter SUPPORT_OBSOLETE_MEASURES to YES in NQSConfig file.
My question is, since, aggregate functions in logical column definitions which use other logical columns, e.g. SUM(Amount_Sold), are not supported anymore.
So I want to know is there anyone aware of any chance the functionality would be permanently removed ie.. in future even we cannot do it any more by adding SUPPORT_OBSOLETE_MEASURES to YES in NQSConfig file.
Also how to get rid off the check in error for obsolete error from rpd.
Scenario:
Fact table - values in multiple currencies
Exchange Rate table - currency conversion value
I need to convert it to base currency before reportig.
The users logon from various regions based on User Roles the default currency will be assigned to the user session.
For Adhoc - the default currency filter would be applied and the user will have the flexiblity to override it with other currency values.
So I have to modelled it with two alias tables Adhoc Currency, Reporting Currency (have default filter set to TargetCurrency to the session variable).
In physical column mapping since I have two tables I cannot do (Fact.Value/Currency conversion) and then set the aggregation rule to sum, since I can choose only one value.
Is there any way we can make OBIEE to do SUM ( A / B ) , where B can be tableA.ColumnA or tableB.ColumnA depends on the source selected.
Thanks,
VinodhHere you go..
It can be done by just one logical column but while creating it don't use "Existing Logical Column as Source".
Goto Data Type tab and select the table and then apply formula as LOWER(UN). After that exclusively apply Count Distinct aggr rule by selecting from list.
It will come out as count(distinct lower (un))
Hope this helps
Edited by: Deepak Gupta on Aug 20, 2011 12:51 AM -
Maintenance Optimizer Error "Value loss during allocation"
Hi Everybody,
like Error when Launching the Maintenance optimizer, i am facing the same problem with SolMan 7.1. Is there anything new?
System is new installed.
SOLMAN_SETUP is executed.
BC Set for MOPZ are activeded.
SMSY is arranged.
MOPZ is aborting after calculation the target with
On Web:
The followin error text was processed in SOL the systm: Value loss during allocation.
The error occurred on the application server _______ and in the work process. 7
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_IMPACT_ASC of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_22 of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: HANDLEDEFAULT of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/06BL1VDEKWGU61REAXHZ==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
On ST22:
Category ABAP Programming Error
Runtime Errors CONVT_DATA_LOSS
Except. CX_SY_CONVERSION_DATA_LOSS
ABAP Program CL_MO_SMP_ADAPTER=============CP
Application Component SV-SMG-MAI
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_DATA_LOSS', was not
caught in
procedure "GET_2ND_CHECK_RESULT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Value "01200615325000005298|01200314694900012246:01200314694900010013" was
allocated in a field which is not long enough.
Therefore the target field could not store all information of
"01200615325000005298|01200314694900012246:01200314694900010013".Hello Espartaco,
I have the same problem, too. Have there been a response to your OSS message?
With best regards
Frank Lehmann -
Dear Sir,
When i executing the t-code DSWP some error is coming (profile parameter icm/host_name_full is not set correctly see long test) Can u please tell me how to solve this issue.
REgards,
K.RamamoorthyHi,
Run SMSY --> System Groups and Logical Components -> Solution Landscapes does it show the solutions you have defined in your Solution manager????
and also Go to DSWP>Solution Landscape>Solution settings
Now go to System Group Tab
Here it will be showing your systems in Logical Components. Double click on the system you want to add in Maintenance optimizer.
In Production System Column, Go to the drop down & Select The client you want to add as Production System repeat these steps for all systems added and after that save the current session
Now you will be able to see system. Try this and revert back. -
Full Optimize Error - OutOfMemoryException
Hello
Has anyone come across the following error when running a full Optimize from SAP BPC Administration.
Error Message: Exception of type system OutOfMemoryException was thrown.
I've raised a support call but would appreciate any help on knowing why this happens and how I can resolve it.
Many thanks
HinaThe size of your SQL log file needs to be increased. Depending on your drive space you can change your autogrowth options to unrestricted and that should solve the issue.
-
Could not retrieve the doc with the passed obsolete token(Error: RWI 00323)
Error using WebService API via Tomcat and .NET framework 2.0. Am storing ReportEngine and Session instance memory as suggested but still get this error. How can I reset tokens or increase token limit so this error does not occur.
Inner Exception
Type : BusinessObjects.DSWS.DSWSException, BusinessObjects.DSWS, Version=11.5.4100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304
Message : getDocumentInformation exception (Error: RWI 00323)
Source : DSWS Web Service Consumer
Help link :
ID : R1
WebServiceID :
Operation : reportengine.dsws.businessobjects.com/getDocumentInformation
CallStackTrace : com.businessobjects.rebean.wi.ConfigurationException: Could not retrieve the document with the passed obsolete token. (Error: RWI 00323)
at com.businessobjects.rebean.wi.ReportEngineImpl.getDocumentFromStorageToken(ReportEngineImpl.java:461)
at com.businessobjects.rebean.wi.occa.WebiReportEngine.getDocumentFromStorageToken(WebiReportEngine.java:239)
at com.businessobjects.dsws.WebIntelligenceReportEngineManager.openDocument(Unknown Source)
at com.businessobjects.dsws.wsb.reportengine.WebIntelligenceReportEngineSoapImpl.getDocumentInformation(Unknown Source)
at com.businessobjects.dsws.reportengine.ReportEngineSoapImpl.getDocumentInformation(Unknown Source)
at com.businessobjects.dsws.reportengine.ReportEngineSoapSkeleton.getDocumentInformation(Unknown Source)
at sun.reflect.GeneratedMethodAccessor166.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:402)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:309)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:333)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:150)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:120)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:481)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:323)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:854)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:339)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at com.businessobjects.dsws.wsc.common.axis.FlashFilter.doFilter(Unknown Source)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:186)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.businessobjects.rebean.internal.util.storage.InternalStorageException: token:we00100000e9816b1c411b is probably too old, could not be found in token history...
at com.businessobjects.rebean.internal.util.storage.ClusterStorageManager.retrieveObject(ClusterStorageManager.java:380)
at com.businessobjects.rebean.wi.ReportEngineImpl.getDocumentFromStorageToken(ReportEngineImpl.java:449)
... 47 more
CauseID : RWI 00323
CauseMessage : Could not retrieve the document with the passed obsolete token. (Error: RWI 00323)
CauseDetail :
CauseException : com.businessobjects.rebean.wi.ConfigurationException
Data : System.Collections.ListDictionaryInternal
TargetSite : BusinessObjects.DSWS.ReportEngine.DocumentInformation GetDocumentInformation(System.String, BusinessObjects.DSWS.ReportEngine.RetrieveMustFillInfo, BusinessObjects.DSWS.ReportEngine.Action[], BusinessObjects.DSWS.ReportEngine.Navigate, BusinessObjects.DSWS.ReportEngine.RetrieveData)
Stack Trace : at BusinessObjects.DSWS.ReportEngine.ReportEngine.GetDocumentInformation(String documentReference, RetrieveMustFillInfo retrieveMustFillInfo, Action[] actions, Navigate navigate, RetrieveData retrieveData)
ThanksYou can reclaim storage token stack space by sending Close action to any document you're done with.
You can increase the storage token stack space by editing the Web Services Provider app dswsbobje.war, the file WEB-INF\classes\webi.properties. Look inside that file for the storaget token stack size setting.
Sincerely,
Ted Ueda -
Unconstrained Optimization: error in help page
I noticed an error in the Unconstrained Optimization help page (see http://zone.ni.com/reference/en-XX/help/371361B-01/gmath/unconstrained_optimization/ for instance): the objective function template should be '...\ucno_objective function template.vit' instead of '...\cno_objective function template.vit'.
This missing 'u' drove me crasy for about 2 hours in understanding why I couldn't link my VI ref to the optimization VI :-(Thanks for the feedback!
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
CTD - Certified TestStand Developer / Développeur TestStand Certifié
CLAD - Certified LabVIEW Associate Developer -
Hi
the SCM optimizer run is failing with the following error.
> sno_module.cpp(317) 'SnoModule' optimal solution found
<e> optsvr_rfcconnection.cpp(953) 'MsgMgr' <RFC> RfcCallReceive(RFC_HANDLE=1, func<152>=/SAPAPO/OPT_SVR_CALL) failed in thread#1108
RFC_RC (RFC_SYS_EXCEPTION) System exception raised, connection closed
RFC_ERROR_GROUP (RFC_ERROR_SYSTEM_FAILURE) e.g. SAP system exception raised
key=RFC_ERROR_SYSTEM_FAILURE
LOCATION SAP-Gateway on host / sapgw10
ERROR Conversation 9856256 not found
message=CPIC-CALL: 'CMRCV : rc=19
I checked the logs from gateway dev_rd, found the same error..
Please let me know how to troubleshoot. Thanks in advance.
Edited by: Kheer. on Nov 15, 2009 3:29 AM
Edited by: Kheer. on Nov 15, 2009 3:35 AM
Edited by: Kheer. on Nov 15, 2009 3:40 AMHi Kheer,
As per i know, there is NO standard function module or program by this name '/SAPAPO/OPT_SVR_CALL' in SCM system.
But anyways, you can check in your SCM systems but not in Optimizer.
Go to transaction - se37 & se38 for checking for both function module and programs respectively.
note - you may just put /sapapo* and press f4 to see the list of the function modules or programes in your system.
I hope this will help you in concluding the issue.
Regards
Sekhar -
GB constant optimization error
Hi everyone,
I have been having problems with GB constantly telling me that it cannot playback and giving me the error telling me how to optimize performance. I've searched for this topic on the discussion board and did everything in the helpfile, however, I am STILL having trouble...even with just ONE track with NO EFFECTS, I get this error consistantly even though I have 768 MB RAM and 1.6 GHz and have made songs before with multiple tracks and many effects. Additonally, I have no other programs running...any ideas?
PS. I read about turning off network connection but I don't know what this means or how to do this...please help!the device is an Instant Music converter by ADS.
I['m afraid I don't know anything about Instant Music B-(> What feature does it offer that is important to your project? Have you tried going straight into your iMac?
http://www.thehangtime.com/gb/gbfaq2.html#recordcassette
can't figure out what audio editor your are recommending...
I wasn't recommending any particular one, ANY one will do. Audacity is a popular freeware editor. I use Peak, and other folks use whichever editor they feel most comfortable with.
--HangTime [Will Compute for Food] B-)> -
Optimization Error!!
Hi Experts,
We are working on BPC 7.5 M sp11, we are seeing the below error while optimizing the applications and are seeing this error for the first time:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
Please Advice.
Thanks & Regards,
RohitHi Rohit,
should be Fully Qualified Domain names:
sql server name (db)
olap server name (db)
insight olap server name (db)
file share server name (db)
reporting services server name (application)
application server name (application)
scheduler server name (application)
web server name (application)
Verify that these info (bpc server manager) are the same of the appserver->tblAppSetServerInfo table(they should be synchronized)
check also the DBConnectionString and the other parameters of the appserver->tblAppSetInfo table
If not successfully try search on google, this is a sql error and there are several links on the microsoft site about it (very often it's connected with server timeout and you will found hints on server settings)
Regards
Roberto -
Maintenance Optimizer Error: TMWFLOW/MO_BACKEND111
Hello,
We get an error when trying to use MOPZ so that it automatically calculates the files to be downloaded.
/TMWFLOW/MO_BACKEND111
Not all instances required for the installation are active.
++++++++++++++++++++++++++++++++++++++++++++
I would like to know if anyone has gotten this error before, and how to get started on resolving the root cause.Here is what I am seeing on my screen...
Calculate download files automatically
Type Message Text
Error Not all instances required for the installation are active
Error System not configured: Portal Content-39
Error System not configured: Portal Content-39
Error System not configured: Portal Content-39
Error System not configured: Portal Content-39
The application log provides no additional useful detail.
I appreciate the help so far.
Maybe you are looking for
-
When will the thunderbolt display be updated with usb 3.0
Eagerly awaiting this update -- will buy as soon as it's available.
-
How to install excel as a viewer in bw.
Hi, Not able to access Business Explorer in BI Server.Its showing the error :install excel as a viewer.please help me solve this.
-
Indesign CS2 upgrade to CS3 - Teaser
Have a teaser question. I have creative premium suite CS2 which I have recently upgraded to web premium CS3. This upgrades all the software within the CS2 suite except Indesign which remains CS2. My question is can I now upgrade my Indesign CS2 to CS
-
I've got a 16:9 widesreen DV file extracted using Mpeg Streamclip. When played in Logic it's 4:3, is there anyway to get Logic to spit out 16:9?..... film directors can get really picky when their little babies get all squished up!!
-
Where i can download Forms6i Release Patch 9 or 10...pls help
Where i can download Forms6i Release Patch 9 or 10...pls help