Obtain MAC Address from 250 iPads

Hi all,
I have taken delivery of 250 iPads which I am configuring with OSX Server on a MAC Mini. So far, so good!
Our wireless network uses MAC Address authentication so I have to add each MAC Address to our Cisco Wireless controller.
Without having to go to Settings > General > About and write down the MAC Address from every device, is there a way to obtain the MAC Address from either the box using the barcode, or maybe an App that loads up on screen and shows the MAC Address of the device in a barcode format that I can then quickly scan into an Excel spreadsheet and import?
I feel that i'm about to waste a lot of time going on to each iPad and obtaining the MAC Address
Thanks in advance
Regards
Jim

If you have the ability to plug them into Apple Configurator, you can connect them with a USB hub and update and supervise them.  This will let you export MAC Addresses and Serial numbers from Configurator to a CSV file that you can use to upload to your wireless controller.  If you need to, be sure to Unsupervise the iPads when you are done.
The info you're looking for may also be available through GSX, but I'm not familiar with everything you can use it for on your end.

Similar Messages

  • How do I get the MAC address from my iPad?Thanksss.

    How do I get the MAC address from my iPad?Thanksss.

    Settings -> General -> About -> Wi-Fi Address
    Regards.

  • It there a way to get the wi-fi mac address from an iPad's serial number

    our school seems to have misplaced on of it's iPads. I have the serial number listed, but not the wi-fi mac address. our wireless network displays the wi-fi mac address, so the serial number doe snot help me in this instance.
    is it possible to get the devices wi-fi mac address if I only have the serial number available?
    the school does not have any iTunes account associated with the iPads since they are configured with the apple configurator and pushed down profiles. using this procedure, it is not necessary for the school to assign an apple ID to them.
    is here someone whom I can contact for this information?
    any assistance will be greatly appreciated.
    michael

    i have already tried support .. this was my next course of action
    Strike 2!
    Thank you both for your responces.
    also contacted the school's education support rep .. waiting to hear back.
    next is Apple direct in California .. have to wait for them .. 8 PST

  • Obtain IP address from Mac address

    Hi all,
    Is ARD capable of obtaining IP addresses from mac addresses?
    Please advise.

    ARD's System Overview can display IP addresses and MAC addresses for computers it manages. If you're asking whether ARD can scan a network for a particular MAC address and return the IP address for a computer that's not in ARD's list of managed computers, then no, it can't (at least not by any method I know of). ARD is really not a network scanning/management application; it's for managing Mac workstations.
    Message was edited by: Dave Sawyer

  • How do I remove an obsolete email address from my ipad

    how do I remove an obsolete email address from my ipad?

    If, when you see the address, you see a white arrow in a blue circle to the right, press that symbol.  You would see a "Delete" option at the bottom.

  • Is there any way to pull out computer Mac addresses from GPO?

    Hello!
    I was wondering if there is any way to pull out the mac address from all the computers in the organisation via the group policy?
    It would be rather difficult to pull out mac address one by one from each computer.
    Appreciate your assistance and advise on this!
    Thank you so much :)

    You can use group policy to run a startup or logon script to get the information and write it to some file/database.
    You could also get the information remotely using a script.
    You could also as your network guy for a list of IPs and MACs they see.
    Group policy is intended to make settings, not to get information. However you can
    set a startup or logonscript that reads out the information through group policy.
    A sample script surely is available in the scriptcenter, but I think help on the specific script is more something or the scripting forums.
    MCP/MCSA/MCTS/MCITP

  • How to get MAC address from client machine ?

    Hi dear,
    We are implementing security measures for a banking system, so it is required that we track the MAC address of the registered clients along with other parameters. How do we get the MAC address from client machine using ADF or running scripts in client side?
    thanks all

    Hi,
    Welcome to OTN.
    Your question has nothing to do with ADF as such. Googling would give you plenty of such topics.
    -Arun

  • How to get MAC address from IP address in LAN

    Hi all,
    How to get MAC address from IP address in LAN (windows or any OS), I would have all IP addresses of my LAN, so I would like to know all MAC address.
    Code examples are highly appreciated.
    Thanks & Regards,
    abel...

    abel wrote:
    Yeah that is only working for local system, but how to get remote system's MAC ..?
    Thanks for quick reply ...
    Edited by: abel on Jan 28, 2009 12:10 AMIt is my understanding that only one person ever found the holy grail which you seek. But sadly [_he's dead_|http://forums.sun.com/profile.jspa?userID=649366]
    As a curious aside how did you manage to get the list of IPs?

  • Blocking a MAC address from Authentication to AIR-AP1230 12.3(8) JA

    Anyone know the CLI commands for blocking a single MAC address from Associating to an AIR-AP1230 running 12.3(8)?

    This link may help as well:
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a0080184aa0.html#91655
    Change the Action to Block, make the Default Action Forward All, and make the mask 0.0.0.0. Apply this to the dotllradio interface (or sub-interface), filtering inbound packets. This should block the specified MAC address only.

  • Trying to setup wifi, how do I get the mac address from ipod touch 5th gen?

    trying to setup wifi, how do I get the mac address from ipod touch 5th gen?  cannot get to the setting screen as it is trying to connect to itunes.

    If yo are setting up the iPod vai wifi you have to connect to a network that does not use MAC address filtering.
    After it is set up yu can get the MAC from Settings>General>About>WiFi Address

  • Bloo ,,,, Please remove my MAC addresses from hardcoded server redirect list

    Bloo
    Have sent multiple PM's in reply and told you that system was updated and politely asked you remove my MAC addresses from bypass list so that normal updates can be applied.
    Solved!
    Go to Solution.

    Thanks Yogapad. I'll let bloo know about it. Please PM me your Mac Address to get things fixed faster.
    Cheers,
    Cleo
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • HT204150 Is there a way to delete an email address from an iPad's memory?

    I once emailed my boss from my personal .mac email account so that is in his iPad memory.  Yesterday he emailed me with a work related request and the email defaulted to my .mac account rather than my work email address.  I don't often check my personal email since I'm chained to my office desk.  I almost missed this email and that would have been bad for me and my boss' relationship.  Can I delete it from his iPad to prevent this from happening going forward?

    You can't - it is his ipad. How do you like them apples?
    Seriously - you need to tell him that those emails will not reach you on time. The only way to delete those is to restore the ipad (cause they are cashed in) He would be completely craaaaazy to allow you to do that.

  • How to hide or rename the HP Printer's Mac address from Lion Finder Sidebar

    I have an HP d100a all in one printer, and since upgrading to OSX 10.7 (Lion), my printer's mac address shows up in the Finder Sidebar under Shared devices. I understand this is for the printers SD card slot to be shared over my network, however the name is not user friendly.
    Is there a way to rename what is displayed in the Finder window, from the devices mac address to a friendlier name?
    If not, is there a way to disable the sharing of the SD card slot so it is hidden from the sidebar completely?
    I have found several posts from people not knowing what this entry is, but I have not managed to find any posts that explain how to rename or hide the entry.
    Any help would be greatly appreciated. 

    I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
    The strange thing is that the Embedded Web Server says:
    "This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
    But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
    Please help with solving this issues?

  • SQL Cluster - Unable to obtain IP Address from System Center IP Pool

    Hi everyone,
    we are trying to deploy a SQL cluster into a windows azure pack tenant cloud.
    Our azure pack environment contains:
    - 4X Hyper-V server in a failover cluster
    - 1X SCVMM server
    - multiple WAP server
    Steps we have done:
    -    Windows failover cluster is installed and configured successfully
    -    Quorum disk was configured successfully
    -    SQL server 2014 installation (via static IP) is successfully. But routing between the VMs is not possible.
    -    SQL server 2014 installation (via DHCP) fails at the end of the installation with following error:
            -> We used DHCP to obtain an IP from the scvmm IP pool.
    (01) 2015-04-22 15:29:11 Slp: Running Action: cluster_ip_address_cluster_config_Cpu64
    (01) 2015-04-22 15:29:11 Slp: Action Data:
    (01) 2015-04-22 15:29:11 Slp:   Feature = SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64
    (01) 2015-04-22 15:29:11 Slp:   Scenario = install
    (01) 2015-04-22 15:29:11 Slp:   Timing = ConfigNonRC
    (01) 2015-04-22 15:29:11 Slp:   ConfigObjectType = Microsoft.SqlServer.Configuration.ClusterConfiguration.ClusterIPAddressPrivateConfigObject
    (01) 2015-04-22 15:29:11 Slp:   FeatureName = SQL_Engine_Core_Inst
    (01) 2015-04-22 15:29:11 Slp:   FeatureCpuType = Cpu64
    (01) 2015-04-22 15:29:11 Slp:   FeaturePackageId = sql_engine_core_inst
    (01) 2015-04-22 15:29:11 Slp:   FeatureClusterState = CompleteFailoverCluster
    (01) 2015-04-22 15:29:11 Slp: Creating IPv4 address 'SQL IP Address 1 (SQLADFS)'.
    (01) 2015-04-22 15:29:11 Slp: Creating cluster resource 'SQL IP Address 1 (SQLADFS)' of type 'IP Address' in group 'SQL Server (ADFS)'
    (01) 2015-04-22 15:29:11 Slp: Bringing IP address resource 'Type='IP Address' NetworkName='Cluster Network 1' Group='SQL Server (ADFS)' Resource='SQL IP Address 1 (SQLADFS)'' online
    (01) 2015-04-22 15:29:11 Slp: Bringing cluster resource 'SQL IP Address 1 (SQLADFS)' online
    (01) 2015-04-22 15:29:12 Slp: Prompting user if they want to retry this action due to the following failure:
    (01) 2015-04-22 15:29:12 Slp: ----------------------------------------
    (01) 2015-04-22 15:29:12 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    (01) 2015-04-22 15:29:12 Slp: Inner exceptions are being indented
    (01) 2015-04-22 15:29:12 Slp:
    (01) 2015-04-22 15:29:12 Slp: Exception type: Microsoft.SqlServer.Configuration.Cluster.ResourceOnlineException
    (01) 2015-04-22 15:29:12 Slp:     Message:
    (01) 2015-04-22 15:29:12 Slp:         The cluster resource 'SQL IP Address 1 (SQLADFS)' could not be brought online.  Error: There was a failure to call cluster code from a provider. Exception message: Generic failure
    . Status code: 5023. Description: The group or resource is not in the correct state to perform the requested operation.
    (01) 2015-04-22 15:29:12 Slp:         .
    (01) 2015-04-22 15:29:12 Slp:     HResult : 0x86d8003a
    (01) 2015-04-22 15:29:12 Slp:         FacilityCode : 1752 (6d8)
    (01) 2015-04-22 15:29:12 Slp:         ErrorCode : 58 (003a)
    (01) 2015-04-22 15:29:12 Slp:     Data:
    (01) 2015-04-22 15:29:12 Slp:       resourceName = SQL IP Address 1 (SQLADFS)
    (01) 2015-04-22 15:29:12 Slp:       errorMessage = There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5023. Description: The group or resource is not in the correct state
    to perform the requested operation.
    (01) 2015-04-22 15:29:12 Slp:       WatsonData = Microsoft.SqlServer.Configuration.Cluster.ResourceOnlineException@58
    (01) 2015-04-22 15:29:12 Slp:       DisableRetry = true
    (01) 2015-04-22 15:29:12 Slp:     Inner exception type: Microsoft.SqlServer.Configuration.Cluster.ClusterProviderDetailedException
    (01) 2015-04-22 15:29:12 Slp:         Message:
    (01) 2015-04-22 15:29:12 Slp:                 There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5023. Description: The
    group or resource is not in the correct state to perform the requested operation.
    (01) 2015-04-22 15:29:12 Slp:                 .
    (01) 2015-04-22 15:29:12 Slp:         HResult : 0x86d70002
    (01) 2015-04-22 15:29:12 Slp:                 FacilityCode : 1751 (6d7)
    (01) 2015-04-22 15:29:12 Slp:                 ErrorCode : 2 (0002)
    (01) 2015-04-22 15:29:12 Slp:         Data:
    (01) 2015-04-22 15:29:12 Slp:           ExceptionMessage = Generic failure
    (01) 2015-04-22 15:29:12 Slp:           StatusCode = 5023
    (01) 2015-04-22 15:29:12 Slp:           Description = The group or resource is not in the correct state to perform the requested operation.
    (01) 2015-04-22 15:29:12 Slp:           WatsonData = Microsoft.SqlServer.Configuration.Cluster.ClusterProviderDetailedException@2
    (01) 2015-04-22 15:29:12 Slp:         Stack:
    (01) 2015-04-22 15:29:12 Slp:                 at Microsoft.SqlServer.Configuration.Cluster.WmiClusterResource.Online(Int32 timeout)
    (01) 2015-04-22 15:29:12 Slp:                 at Microsoft.SqlServer.Configuration.Cluster.ClusterResource.Online(Int32 timeout)
    (01) 2015-04-22 15:29:12 Slp:         Inner exception type: System.Management.ManagementException
    (01) 2015-04-22 15:29:12 Slp:             Message:
    (01) 2015-04-22 15:29:12 Slp:                         Generic failure
    (01) 2015-04-22 15:29:12 Slp:             HResult : 0x80131501
    (01) 2015-04-22 15:29:12 Slp:             Data:
    (01) 2015-04-22 15:29:12 Slp:               WmiErrorCode = Failed
    (01) 2015-04-22 15:29:12 Slp:               WatsonData = Failed@5023
    (01) 2015-04-22 15:29:12 Slp:               Description = The group or resource is not in the correct state to perform the requested operation.
    (01) 2015-04-22 15:29:12 Slp:               ErrorType = 1
    (01) 2015-04-22 15:29:12 Slp:               Operation = ExecMethod
    (01) 2015-04-22 15:29:12 Slp:               ParameterInfo = MSCluster_Resource.Name="SQL IP Address 1 (SQLADFS)"
    (01) 2015-04-22 15:29:12 Slp:               ProviderName = WinMgmt
    (01) 2015-04-22 15:29:12 Slp:               StatusCode = 5023
    (01) 2015-04-22 15:29:12 Slp:             Stack:
    (01) 2015-04-22 15:29:12 Slp:                         at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
    (01) 2015-04-22 15:29:12 Slp:                         at System.Management.ManagementObject.InvokeMethod(String methodName, ManagementBaseObject
    inParameters, InvokeMethodOptions options)
    (01) 2015-04-22 15:29:12 Slp:                         at Microsoft.SqlServer.Configuration.WMIInterop.Resource.BringOnline(UInt32 TimeOut)
    (01) 2015-04-22 15:29:12 Slp:                         at Microsoft.SqlServer.Configuration.Cluster.WmiClusterResource.Online(Int32 timeout)
    (01) 2015-04-22 15:29:12 Slp: ----------------------------------------
    We have tried to reinstall the servers multiple times, without result.
    Can anyone assist us in this case?
    Thanks
    Kind Regards
    Julian

    Hi Darryl,
    thanks for your supply.
    We don't have an DHCP in the Cloud. System Center DHCP is used for assigning IP addresses and routing inforamtion to the vms.
    This works fine for assigning IP addresses to the vms.
    At my current point of understanding network virtualisation with system Center, we do not have an alternative to this way of assigning IP addresses.
    Kind Regards
    Julian

  • Obtaining MAC address in C program

    Hello there,
    I wish to obtain the MAC address of the primary ethernet card on a Solaris OS via C. This program is invoked many times/second so calling an external program is not really suitable.
    The MAC address is being obtained for the purpose of providing a low-level software lock/key system (low level meaning I am aware it's relatively trivial to circumvent).
    Paul.

    Hello again.
    I found out that the SIOCGARP ioctl will get the ARP entry of a certain IP address in the ethernet. Root access is not required.
    The following program will print the ethernet MAC addresses of all IP networks (including dial-up and 127.0.0.1).
    For Dial-up and 127.0.0.1 "No ethernet address" will be reported. If you have multiple network cards it may be a problem to find out the MAC address of the main board.
    On my Blade-1000 the following output is produced:
    lo0: 127.0.0.1 - No ethernet address.
    eri0: 192.168.178.18 - 08:00:20:FB:2F:78Here is the program:
    #include <stdio.h>
    #include <string.h>
    #include <sys/types.h>
    #include <sys/socket.h>
    #include <sys/sockio.h>
    #include <net/if.h>
    #include <net/if_arp.h>
    #include <netinet/in.h>
    #include <arpa/inet.h>
    main(int argc,char *argv)
        unsigned char eth_addr[6];
        int i,j,sock;
        unsigned char *p;
        struct lifconf lic;
        struct lifreq lifrs[30];
        struct lifnum num;
        struct arpreq ar;
        struct sockaddr_in *soap,*soap2;
        /* Enumerate all IP addresses of the system */
        sock=socket(PF_INET,SOCK_DGRAM,IPPROTO_IP);
        num.lifn_family=AF_INET;
        num.lifn_flags=0;
        ioctl(sock,SIOCGLIFNUM,&num);
        lic.lifc_family=AF_INET;
        lic.lifc_flags=0;
        lic.lifc_len=sizeof(lifrs);
        lic.lifc_buf=(caddr_t)&(lifrs[0] );
        ioctl(sock,SIOCGLIFCONF,&lic);
        /* Get the ethernet address for each of them */
        for(i=0;i<num.lifn_count;i++)
            /* Get IP address */
            ioctl(sock,SIOCGLIFADDR,&(lifrs[ i ]));
            soap=(struct sockaddr_in *)&(lifrs[ i ].lifr_addr);
            soap2=(struct sockaddr_in *)&(ar.arp_pa);
            *soap2=*soap;
            /* Print IP address */
            p=(unsigned char *)&(soap->sin_addr);
            printf("%s: %u.%u.%u.%u - ",lifrs[ i ].lifr_name,
                p[0],p[1],p[2],p[3]);
            /* Get ethernet address */
            if(ioctl(sock,SIOCGARP,&ar)<0)
                printf("No ethernet address.\n");
            else
                p=(unsigned char *)&(ar.arp_ha.sa_data);
                printf("%02X:%02X:%02X:%02X:%02X:%02X\n",
                    p[0],p[1],p[2],p[3],p[4],p[5]);
        close(sock);
    }Martin

Maybe you are looking for