Obvious power issue effecting back plane jks. Popping HOURLY thru speakers, lites up lamp doc scanner. Has blown power supply once. "Genius" diag NTF twice B4 PS blew.
Late 2011 IMac, Obvious power issue. Popping HOURLY thru speakers, lites up lamp doc scanner. Has blown power supply once. "Genius" diag NTF twice B4 PS blew.
Similar Messages
-
Obvious power issue effecting all back plane jks. Popping HOURLY (clocked) thru speakers, lites up lamp on doc scanner. Has blown power supply once. "Genius" diag NTF twice B4 power supply blew. Still have same trouble. I made very CLEAR to Genius Bar that it was a hardware issue after they continued to trouble shoot software. I was referred to tier 2 who told me they only worked on SOFTWARE. Does anyone know a more qualified shop who can fix an OBVIOUS mother board issue tracing back to the power supply? I had the same issue with a 20" with 7 visits & had to literally take a video of the trouble before they could figure out the trouble was the video card. From reading the sheer number of posts of the same trouble descriptions going back to 2007, it's all too obvious the path to MSFT is being taken.
-
Looking for Apple TV power supply - any ideas?
Hi folks,
My out of warranty Apple TV has an obvious power supply problem (it's totally dead, no power up whatsoever).
There are a few websites that have tutorials on replacing the power supply (or hard drive, etc...).
The problem is I can't find a place to purchase a replacement power supply.
It's a Delta Electronics ADP-36BF, Apple part # 614-0395 (http://s1.guide-images.ifixit.com/igi/HGslJDZeqPnKlFVD.huge)
Any ideas on where to find one?
If I can't get it myself to replace it, I'll probably just wait for the Boxee Box to replace it.
Thanks.I'm in the exact same boat -- I've looked everywhere and can't find anything. I've even called Delta Electronics about the part and they said they can only sell them to Apple. If you find anything out please let me know! Thanks.
-
HI there,
I have a PXI-1044 chassis loaded with varios NI cards, such as arbs, DIO's analogues and data aquasition cards.
I have also designed my own "Passive" PCB that just uses the supply rails on the cPCI P1 connector.
However I find that the -12V rail is not there on my own card.
Is there a power sequencer or device that turns off the rails to cards that doesnt tell the controller that it needs them ?
Can I frig this using MAX or put a wire link on the PCB connector to another pin to get the -12V line enabled ?
This is proving to be a real show stopper !
All other PXI Cards fitted to the rack function correctly !
Help please !
John
my real email address is [email protected]John,
-12V is supplied to the slots regardless of whether there's a card present or not. If you're sure that you're looking at the right line, you may have a bad/damaged power supply or backplane.
You should probably check the voltage at the "Remote Inhibit and Voltage Monitoring" connector on the back of the chassis with a DMM. The pinout is on page 2-9 of the detailed specifications.
- Robert -
I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c. Now, I keep getting a pop up that says Continue Restoring? (This iPhone has not been backed uprecently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app date?)
I seleted to finish downloading because I didn't want to lose anything. It still will not finish downloading and I have tried this several times.
What do I need to do to that I can get my iphone to back up and so that I can install the new iOS?Hello there, Brandifoote24.
The following Knowledge Base article offers up an explanation of what you're error signifies:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"This iPhone has not been backed up recently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app data?"
This message is displayed if your iOS device has been trying to complete a restore for more than three days. This can occur if your restore has been interrupted due to network connectivity issues or some other problem occurs.
Being that this is the case, you would want to go back to the article it seems you were referred to us from and try to restore from your icloud backup again:
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/TS4036
How do I restore an iCloud backup if my device is already set up for use?
You'll need to erase all data and settings from your device, so first confirm that you have an iCloud backup to restore:
Go to Settings > iCloud > Storage & Backup > Manage Storage, then tap the name of your device to view a list of iCloud backups.
Check the date of the backup you want to restore, because you'll be restoring only what iCloud backed up on that date.
After confirming that an iCloud backup is available, follow these steps:
Connect your device to a power source and make sure that it is connected to the Internet via Wi-Fi.
Follow the instructions for restoring your iOS device from an iCloud backup, which include making sure that your device is using the latest version of iOS.
If the issue persists, then I would troubleshoot Wi-Fi using the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I lost my old iphone and have a new 5s.. i need to sync to itunes. i had to donwload manually via tools but i didnt download all four files. now when i plug my phone into itunes it says there is an error bc i didnt download all the files. so when i go into itunes now and check for updates it says its up to date. the problem is with the phone support file i didnt download.
Does anyone know how to get back to the pop up that has the music player update and itunes update bc this is the only place i have seen "tools" to be able to manually update all four files....
***IF i completely uninstall itunes and reinstall will it still have all my songs, photos, apps etc... bc i need to sync my new phone to get all my stuff backthis is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me... -
1st Gen iMac Power Supply Issue
I just got my iMac G5 back from Apple after having the power supply and logic board replaced for the second time in two years.
It is apparently a fairly common problem with the first generation iMac G5s. I've basically been told it's a problem with no real solution and that they'll fix it for free (for the first three years). It's great that I'm within the three years, but if it happens again after October, I'm likely going to have to foot the bill to get it repaired.
Does anyone have any more detailed info on this issue (other than Apple's Repair Extension doc)? Would turning off the computer each night prolong the life of those parts? Would turning it on/off everyday reduce the life of those parts?
Any thoughts/comments?
Thnx...CN
iMac G5 Mac OS X (10.3.9)
iMac G5Just to add to BB's comments, I doubt that leaving the computer on will have any benefit at all for you in terms of longevity. If you have problems with faulty capacitors , and the like, in fact it will probably make the issue worse rather than better (though I doubt this will be a problem for you if your logic board was replaced after about April 2005). Doing so will probably also add a little extra wear to the bearings of your HD (unless you have it set to spin down when not needed) , and will cost you a little more (but not a whole lot - though when we all leave them running the environmental costs continue to mount) in electricity over time.
You should probably also shut down every so often anyway - maybe once a week or so, to help clear some potential memory issues that can persist with some applications even under OSX, and you should certainly shut down at and start up again at any time when you notice slowdowns, program "hangs" or other problems.
Cheers
Rod -
Issue more than Planned in Production Order
Hi All,
I have a problem with 2007B SP00 PL11 for Issue for Production.
In 2005B, I can issue the BOM Components more than planned. But in 2007B version, I am unable to issue more than planned. When I right-click at Production Order to Issue Component or at Issue for Production and copy from Production order. no items are displayed.
I have already issued in full at the 1st issue. Then subsequently, i need to issue some more qty for certain components. But i am unable to do that.
Has this feature of issue more been changed in 2007B?
What other method can be adopted without changing the planned qty?
Please advise.
Regards
JessieHi guys,
Thanks for the fast response.
Duplicate the previous issue to create the over-issue is not a good solution. It is very troublesome. itis not a good procedure to ask customers to do this step.
Changing of the planned qty will mean that i am not able to trace my initial plan and have to go back to the BOM. again, this is not logical. especially when the queries are using figures directly from production order tables.
Since it can be done in 2005 version, why is SAP taking it out this feature in 2007? -
Hello! I would like to upgrade my after effect monthly plan to creative cloud. How do i go about?
Hello! I would like to upgrade my after effect monthly plan to creative cloud. How do i go about?
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN ) -
Effect of Planning Plant in Tasklist
Dear All,
I having one query related to Tasklist in PM
There are two Plants X and Y
Earlier tasklist created for Planning plant as X at header level.
Now Planning plant X has been closed , Instead of that need to use Planning plant Y.
There is no issue related to maintenance work cernter and associated Plant.
In my PM order Planning plant only showing at operations level only.
At header level planning plant can't be change , Is there any issue if i will use old one planning plant ??
Please advise the effect of Planning Plant.
Thanks,
AbhishekGreetings Abhishek,
For starters, if you do not migrate the Task Lists into the new Planning Plant, you will not be able to select them when including the Task List in a new Work Order, or assign them to a Maintenance Item, if they are created for the new Planning Plant. And the Maintenance Order or Item has the Planning Plant on Header level.
Therefore, as recommended by Pete Atkin, you ought to migrate all your old Planning Plant X Task Lists into Planning Plant Y. It's also a good opportunity to cleanse your data.
PS. Pete, my sincere congratulations on the well-deserved Diamond! -
21 September, 2014, from India.
MD513AE/A iPad Wi-Fi-16GB White - Model A 1458
I have purchase this from Dubai, UAE, some 2 years back.
I am NOT able to switch it on; when connected to power supply, the battery icon comes in but no signs of charging.
After some times the ‘Apple’ icon comes in. Tried simultaneous operation of Sleep and Power buttons, but of no use.
Sometimes a picture of cable and ITunes comes in; but not able to connect to
P C as there is no battery charge.Hi madhu254,
Thank you for visiting Apple Support Communities.
If your iPhone is not charging, please check out this article.
iPhone and iPod touch: Charging the battery
There's a Resolving issues section, but you may want to read it all.
Best regards,
Nubz -
qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?
For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
For example:
At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
This may or may not assist you but, it hopefully explains how the issue may be happening. -
i bought a 2TB Time Capsule in Sep 2010. its just failed last week, less than 2 months after the expiry of the 12month warranty.
and 3 months after the end of Apple's offer to replace all the many Time Capsules that have failed previously due to this same fault.
nice timing guys.
"yeah, its dead. same old known power supply issue", says my local Apple service center, "just unlucky".
huh? "unlucky"? you sell products with known defects, and when it fails i'm "unlucky". nice.
"OK, anyway, how much to fix it ?", i ask.
"you can't fix them, its closed", is the reply, "you have to buy another one".
"hmpf. OK, how do I get my backed-up data off it ?"
"you can't. we could try break it open and recover the hard disk i guess, but no guarantees we'd get it, and you'd have to pay for us to do that, whether it works or not of course".
"er.... is there a hidden camera in here? are we on TV? you can't be serious ? ..and this piece of garbage is what i've been using for a secure backup of my precious, irreplaceable, priceless personal data ???"ceeb28744. Welcome to the Apple Users Support Community. Sorry to hear your TC died! You said it was a 2TB so I would guess it be the model A1355/MB997LL/A or MC344LL/A. Believe it or not all users of these time capsules will eventually experience this problem like you have. There is a 99.5% (or better) chance that the only thing that is wrong with it is the internal power supply. If you will go to this site.... https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair and once there look over at the left side and you will find:
Apple Time Capsule Repairers and from that list you will be able to choose from a list of individuals that could repair your TC and have it returned to you fully operational again. The individuals on the list are hardware technicians and they can save you a lot of money and time.
Larry -
IMac went totally black. No power to the unit. Have there been issues with the power supply?
My iMac went totally went black tonight when my grandchildren were using the iMac. I can't power it up? Have there been issues with the power supply?
It may just be the power cord (between the mains and the computer). If you have an Apple store or Authorised store near you, take the cord in and check it out. Indeed, check if it has been partly pulled out by pressing it firmly into the back of the computer.
-
HP DV7-1020US (Power supply/battery issues) Please help diagnose!
Hi everyone,
I've read a lot of forum information about power issues/problems with this model laptop.
But have finally decided to post this question up here for some real HP support.
The problems started with the battery not being able to hold a charge. Shortly after, my brick started making a strange beeping
noise. I purchased a matching brick. I was able to get a few good minutes of charge and then every time after the laptop wouldn't power-up
at all. I'd just get flashing lights on the front (HD, Lightning bolt, Power). The lights would stop blinking after resetting the battery. I did some
research on laptop batteries and found that not allowing it to drain and then be recharged could cause it to go bad.
I purchased and received my new battery in the mail today. I am currently in the process of charging the new battery but have noticed
that the little lightning bolt light in the front of the laptop is NOT lighting up as it should when it's charging.
Is it NOT lighting up because both the battery and brick are after-market products?
I am going to allow the laptop with the new battery and brick to charge for 16 hours without attempting to turn it on.
I'm concerned that the system board or internal power supply might be having problems as well.
Has anyone encountered these type of power issues with this particular laptop?
Should I be able to run the laptop without the battery? That option has not worked for me.
Any assistance/guidance from you pro's out there would be greatly appreciated.
Thanks!
JUST WANTED TO ADD:
Laptop has been charging with new brick and battery for 8 hours straight and now, the battery indicator light is blinking.
I've tried removing the battery and reseating it but as soon as I plug the power back into the laptop the blinking begins again.
Message Edited by pixelitis on 11-02-2009 10:56 PMHi people!
I started having the same problem with my 1020us. Battery isn't charging (it's 91% available, when the battery reaches 35% the laptop power-off). The battery led in front panel blinks too when laptop is plugged in to AC adapter).
Another problem with HP. I am so disappointed. =\
Maybe you are looking for
-
SOS: Exit for ME51n/ ME52n/ ME53n/
hello erverybody, at First i would like to implement the exit mm06e007 but i have no idea how to do it!! have someone an example, coding or Tips,... ?? Second Problem : how can I Overwrite the <u>Tapstrips name</u> using exit MEREQ001 ?? please i nee
-
Unable to install Integration Services for SQL Server 2005
I'm not able to select "Integration Services Project" in Business Intelligence Development Studio (it is not in the templates below): When installing, it says that it is already installed. Why can't I see it in the project templates?
-
Excise base value missing in ARE1
Dear Experts, In ARE1 document, excise base value is not getting picked. BED, Ecess & SHcess are getting updated properly. Can anyone guide on this issue. Thanks & Regards, Rajeshwari
-
I have a sign off form that I use multiple times daily for customer signatures. Can I simply take a digital photo of it and then allow customers to sign in box via ipad?
-
Where can i find an old version of itunes?
Ok I think I've given up on itunes 7 Is there anywhere to find an older version? I really hope that maybe that will work