OBYC - BSX - Wrrong GL Assgine for a valuation class

DEAR FI GURUS n EXPERTS,
In OBYC, person assigned a wrong GL against a valuation class. Now we want to change that assignment.
On testing server I test the scenario and found the effect is not going on to past entries. IS THERE ANY PROGRAM WHICH I HAVE TO RUN TO CARRIED OUT THE EFFECT IN PAST ENTRIES. (Posting in right GL).
Please suggest.
With thanks,
DSC

Dear All,
Thanks for your prompt replies,
The scenario is such type: Material Group = Plant and machinery and valuation class = 1023 for this material type. Now in OBYC, unde BSX, there should be GL of Plant and machinery in front of valuation Class 1023.
But, some one wrongly entered GL of Spares. So, all the entries were posted in Spare.
Now, we want to get back all those entries in the GL of Plant and machinery.
If we change the GL than new entries will go in right GL. But what to do for old entries.
Please suggest n help.
DSC

Similar Messages

Multiple gl account for blank valuation class in OBYC

hello experts ,
In OBYC FOR VALUATION CLASS 'BLANK' i have maintained a account no which is for service group .
Now for material group also there are few materials in which valaution class is blank and when i do MIGO then these goes to that GL account which is maintained for fleet (service group).
also assigned my the 'grir clearing account ' in 'LMR1M002' and activated the customer exit but the gl account get changed and become the same which is maintained in OBYC for blank valaution class at end of that enhancement 'LMR1M002'.
how to assign two gl account for blank valuation class.one is for service group and other is for material group .
regards
ranjan
Edited by: Ranjan 25 on Oct 28, 2011 9:34 AM

Hi
This is normal Phenomenon since under that material type you must be having other valuation classes other than SUPP, and you must have assigned lot other G/L accounts , i.e for G/L recon you need to consider lot of Inventory accounts. Now if you change, during the next recon you just have to add the old entry details along with the new G/L account. No issues at all other than informing and co-ordination with FI guys after you new assignment of the G/L acct for SUPP.
Best Regards

Change GL account for the valuation class

Hi,
Currently I have a valuation class SUPP which is assign to GL account 14800, now the customer have the request to change it to GL account 14100. There is an option to change it in Config OBYC, but there are a lot of materials involved and a lot of material cost that exist is booked under GL account 14800. Can I just change it OBYC, what's the impact?
Anyone experienced that before?
Thanks!

Hi
This is normal Phenomenon since under that material type you must be having other valuation classes other than SUPP, and you must have assigned lot other G/L accounts , i.e for G/L recon you need to consider lot of Inventory accounts. Now if you change, during the next recon you just have to add the old entry details along with the new G/L account. No issues at all other than informing and co-ordination with FI guys after you new assignment of the G/L acct for SUPP.
Best Regards

Reports for standard Valuation class

Dear Sap Gurus,
I would like to know whether there is any standard reports for valuation class wise...? kindly let me know.Thank you.

Hi,
What do you want Valuation Class wise?
If you want Stock then refer MB5L - List of Stock Values : Balances
And if you want Material List then check MM60, but Valuation Class will be available in output screen not in selection screen.

Account determination for MM (Valuation)

I get an Error when I do a goods movement (Transaction: MB1B) from plant to plant: Account determination for key entry TELC BSX___ ___ 4100 (Valuation) is not mainatained in MM Customizing, where exactly do I maintain these settings, becasue it is a new plant & storage location that I created.
Thank you.

Hello,
System is finding difficulty in finding the G/L s via Automatic account determination.
Goto T.Code OBYC
Select the transaction type BSX
It will ask for your Chart of Accounts TELC
Then maintain G/L accounts for your Valuation class (4100) against valuained.grouping code if maintained.
Regards

Account Determination for Valuation Class

In trying to cancel a confirmation made for a warehouse item, I hit the error that the Account Determination ___ ___ for the Valuation Class Y358 is not possible. Can someone please help me refresh my memory as to which table the valuation class for inventory G/L account is located?
Thanks in advance,
Scott

Go to OBYC and look for the e.g. GBB
double click on the object and here you will see that the account does not exist for the valuation class you see in the error
if you maintain this entery and then try to post the documnet
make sure once oyu maintain this entry then you have to come out from your GR document and then restart again for Posting

Valuation class wise stock report for opening and closing stock

Dear all,
My Clint is asking the report for the opening stock and closing stock with respect to valuation class is there any standard report is available please guide me
regards
pramod

Dear sir,
in my case matarial is split valuated matarial, matarial is maintained with two valuation classes
when seeing the report MB5B its not showing the price valuation class vise, its showing combined together only, again i am using the MC.9 there also same problem its not showing both the valuation class vise price its showing only one valuation class price, if we check for another valuation class price for that particular matarial its telling no data is availabel for the valuation class
regards
pramod

Valuation Class and G/L account

Hi.,
If i am trying to view the G/L accounts assigned to each valuation class, which Table should i be looking under. Or should it be under a T-Code??
Tx
Mahesh

Manish.,
OMWB gives me a list segregated as per the Valuation area , of the Valuation classes which are displayed after configuration.
Now as i browse ,say in BSX, when i need to add a valuation modifier and a valuation class to a GL account, how can i see the GL account assigned to that valuation class.
I understand that the assignment are done in OBYC.
When i go to assign the valaution modifier and valuation class to a GL account, i see the whole list of GL accounts which are there in the system.
But if i need to see the default settings for a valuation class vs GL account, where do i look?
Or do i have to ask the FI team for the G/L account which has been assigned to that particular Valuation class.???
Tx
Mahesh

Split GR/IR accounts by Valuation Class (PO without material master)

Hi Experts,
I've an issue here, when I'm tried to do GR posting (PO without material master), system doesnt able to post GRIR account by valuation class.
Scenario: PO issue without masterial number, enter description and with material group.
In the configuration, I've configure "Entry aids for item without material master", assign material group "Asset" and material group "Services" into 2 different clearing account. However, when GR posting, system prompt error message and not able to do posting.
Kindly advice.

Yes , you can post to different GR/IR accounts based on the valuation class . In OBYC for WRX , you can choose your rules . In the Rules , select valuation class . Then the system will allow you to choose different GR/IR accounts for each valuation class .
During the GR , the system will pick the corresponding GR/IR account based on the material grp valuation class .
Regards,
Hari.

GL a/c mapping valuation class

How can I get the GL account to which service master is attached ( or how can we find the corresponding GL a/c for the valuation class of the service master)?
Regards
VS

Hi
You can find in transaction code OBYC. click on transaction FRL (External activity).
regards
Srinivas

Diifferent Accounts based on Valuation Class /Material group Shorttext -PO

Hello Sapient
We need to differentiate the Posting for short text PO . we want the Asset / Office supplies / Services to post in to a separate G/L Account .We seperate it by Material group , but the posting cannot be done by valuation class assigned to the material group . How can we handle the WRX using valuation class or by any method. what i am referring is all for PO without material master. .
Thanks
Jeevan

Hi Jeevan,
You are absolutely right. I am also facing the same problem. In our case also we do not have a material master. We have created a PO with short text and with a material group. We have assigned a valuation class to this material group.
We have used account assignmed category "P" for the PO.
For the debit posting i.e. for GBB-VBR its taking the GL account based on the valuation class, but for WRX its not taking the GL account with the valuation class.
We want to have different GR/IR account (say 108) for domestic PO's and different GR/IR account (say 109) for Import PO's. We are not able to do this diffrentiation because in OBYC in WRX, while doing MIGO the system is picking only that GL account for which the Valuation class is blank.
I don't think there is a solution to this. If you find any then pl
pease let me know.
But if you don't want to segregate the GL Accounts in WRX then the simple thing for you to do is in OBYC WRX maintain the GL account without Valuation class. Your problem will be resolved.
Rgds
Prasad.

Valuation class on CK40N

Hi,
I have a question about the costing run ck40N. How does the costing run decide the valuation class of a material? The problem is
initially materials were loaded as SEM1 and costed.
In the following period, the valuation class was modified for a few materials to RAW1 and price was changed.
Then we ran CK40N. Because of the price change accounting documents were posted.
Posting Key 83 for material revaluation
Posting key 99 for semi inventory price change account.
It should have posted (PK 99) to raw inventory price account. Not to the semi finished account. Why did it post to semi inventory account. How did it know that the material was originally SEM1?
Please help me. Thanks in advance.

Initially loaded material with SEM1 and then changed the valuation class by changing the material type from SEM1 to RAW1 by MMAM.
Did the costing run and received inventory with MB1C move type 561.
Deleted the cost estimate by CKR1.
Changed the price and did recosted ck24. Got accounting document price change. What accounts it should hit? RAW1 or SEM1? On OMWB I see it posted to SEM1 valuation class inv account
Restating - the material master was created as a SEM1 with valuation class "abcd" for example.
then your made the material the RAW1 which has it own defined valuation classes that do not include "abcd"? so valuation "wxyz" was assigned.
Inventory loaded (561) and posted to the account for wxyz as defined in OMWB for transactions BSX and GBB/BSA (acct modifier)
Deleted cost est
Change price, Recost
Account document should show accounts definded by the valuation class on the material as defined in defined in OMWB for transactions BSX and GBB/???(acct modifier for inventory revaluation).
Check the material master for the valuation class on the material, in the plant and check the config.

How to setup new valuation class and link it with gl a/c

hi
can some one help me setting up new valuation class and then how to link it with gl a/c
i m new so if some one can explain me in steps then that would b awsome.
thanx

Hi Iqbal,
Follow the below path for defining valuation class ;
SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Define Valuation Classes
Note that Valuation class is linked to account category reference.
Account category ref is linked to Material Type.
Thus the system determines Valuation Class for a particular mat.type.
For detmining G/l accounts:
SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Configure automatic postings
Click on account assignment. Double click on BSX , enter chart of accounts .
Against every valuation class you can find the G/L accounts.
Regards
Ramesh Ch

Basic Valuation Class Dout

Dear all,
My dout why we are going for several valuation class for same material type (for example ROH ,3000,3001,etc) they had made posting to same G/L account.OBYC(3000,3001-g/l L33333)
Suppose i want to know the stock value (3000 VCl sugar,3001 VCl maida ) why i should go for different valuation class here iam using different material no (ie,sugar,maida) from that i can take report.
But the settings in the client side is like the above.
we can have report of material ,by valuation class wise any T-code.
Please clear my dout iam confused in the basic itself .
Thanks in advance
Regards
Navin

hi
valuation class is the factor which connect ur material to the gl acct
>My dout why we are going for several valuation class for same material type (for example >ROH ,3000,3001,etc) they had made posting to same G/L account.OBYC(3000,3001-g/l L33333)
look as all the raw materials are not of same species
it can be further classified as per the project or dept or any other criteria
as u said maida and sugar suppose ur making bread out of this and the bread is manufactued at different plant then u can have diff val class as per the plant
or suppose u have diffrent raw at for different product like sugar for fin 1 and maida for fin2 then u can have different avl class as per the fin1 and fin2
resulting in diffrent posting accts for fin1 and fin2 or plant wise
hope it clears ur question
refre following
http://www.google.co.in/search?hl=en&q=sapvaluationclass&meta=
regards
KI

Currency problem in BAPI_MATERIAL_SAVEDATA while uploading valuation class

Hello Experts,
I am uploading valuation class using BAPI_MATERIAL_SAVEDATA.
While uploading it is showing runtime error "Unable to interpret KG as a number".
I have used the FM CONVERSION_EXIT_CUNIT_INPUT to convert the UOM from the file to Field symbol.
still the same. please guide me.
I have pasted my code below.
Kindly go through and help would be highly appreciated.
*& Report ZPRI_MAT_PRICE_UPLOAD
REPORT ZPRI_MAT_PRICE_UPLOAD no standard page heading line-size 150.
tables : mbew,      " Material valuation
         makt,      " Material description
         mara.      " General material master
data : begin of t_matvclass occurs 0,
       material type matnr,     " Material
       ind_sec type mbrsh,      " Industry sector
       mat_typ type mtart,      " Material type
       val_class type BKLAS,    " Valuation class
       MOV_PR TYPE VERPR,       " MOVING PRISE
       STD_PR TYPE STPRS,       " STANDARD PRISE
       base_uom like mara-meins,     " Material unit
       mat_desc type maktx,     " Material description - MAKTX
       plant type werks,        " Plant
       langu(2),
       end of t_matvclass.
data : wa like line of t_matvclass.
data: begin of it_makt occurs 0.
      include structure bapi_makt.
      data end of it_makt.
data :bapi_head like bapimathead,     " Header Segment with Control Info
      bapi_clientdata like bapi_mara,    " Material Data at Client Level
      bapi_clientdatax like bapi_marax, "Checkbox Structure
      bapi_valclass like BAPI_MBEW,      " Valuation class
      bapi_valclassx like BAPI_MBEWX,    " Checkbox Structure
*      BAPI_MOVING_PR LIKE BAPI_MBEW,     "MOVING PRISE
*      BAPI_MOVING_PRX LIKE BAPI_MBEWX,   "MOVING PRISE
*      BAPI_STD_PRISE LIKE BAPI_MBEW,     "STANDARD PRISE
*      BAPI_STD_PRISEX LIKE BAPI_MBEWX,   "STANDARD PRISE
      bapi_return like bapiret2,         " Bapi return structrue
      returnm type table of bapi_matreturn2 with header line.
data : it_excel type alsmex_tabline occurs 0 with header line.
data: begin of it_ret occurs 0.
       include structure bapiret2.
      data end of it_ret.
* Data objects for exception handling.
data : lv_converr type ref to CX_SY_CONVERSION_ERROR,
       lv_dynerr type ref to CX_SY_DYN_CALL_ERROR.
data : txt_converr type string,
       txt_converr_l type string,
       txt_dynerr type string,
       txt_dynerr_l type string.
data : char_uom(4) type c.    " Global UOM after conversion
* Declaring selection screen for selecting a data file
* for uploading valuation class
selection-screen begin of block b1 with frame title text-001.
parameter : file_nam type rlgrap-filename obligatory default
              'C:\master data UPDATED_test.xls'.
parameter : p_begcol type i default 1,        " no-display,
            p_begrow type i default 2,        "   no-display,
            p_endcol type i default 9,        " no-display,
            p_endrow type i default 267.      " no-display.
*parameters: p_valare type mbew-bwkey obligatory.    " Valuation area
selection-screen end of block b1.
at selection-screen on value-request for file_nam.
perform F_get_file using file_nam.
start-of-selection.
perform F_xls_itab using file_nam changing it_excel.
perform F_move_data.
*perform F_get_data.
perform F_Display_data.
*&      Form F_xls_itab
*       text
*      -->P_FILE_NAM text
*      <--P_IT_EXCEL text
form F_xls_itab using    p_file_nam changing p_it_excel.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    filename                      = file_nam
    i_begin_col                   = p_begcol
    i_begin_row                   = p_begrow
    i_end_col                     = p_endcol
    i_end_row                     = p_endrow
tables
    intern                        = it_excel
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3.
endform.                    " F_xls_itab
*&      Form F_get_file
*     Subroutine to get the file on F4
*      -->P_FILE_NAM text
form F_get_file using    p_file_nam.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
   PROGRAM_NAME        = SYST-REPID
   DYNPRO_NUMBER       = SYST-DYNNR
*   FIELD_NAME          = ' '
*   STATIC              = ' '
*   MASK                = ' '
CHANGING
    file_name           = file_nam
EXCEPTIONS
   MASK_TOO_LONG       = 1
   OTHERS              = 2.
endform.                    " F_get_file
*&      Form F_Display_data
*       text
* --> p1        text
* <-- p2        text
form F_Display_data .
skip 2.
*write:/2 'Valuation area :', p_valare.
*write:/2 'Standard price :', p_stdprc.
skip 2.
write:/29 sy-uline(120).
write:/29 sy-vline,
         30 'Material' color 1,               " Material - MATNR
         50 sy-vline, 'Ind_sector' color 1,   " Industry sector - MBRSH
         62 sy-vline, 'Mat_typ' color 1,   " Material type - MTART
         75 sy-vline, 'Valuation class' color 1, " Valuation class
         85 sy-vline, 'Base UOM' color 1,          " Base UOM
         95 sy-vline, 'Material Decp' color 1,     " Material descp
         120 sy-vline, 'Mov Price',                 " Moving price
         130 sy-vline, 'Std Price',                 " Standard price
         140 sy-vline, 'Plant',                     " Plant
         150 sy-vline.
write:/29 sy-uline(120).
loop at t_matvclass into wa.
write:/29 sy-vline,
         30 wa-material color 2,               " Material - MATNR
         50 sy-vline,
         55 wa-ind_sec color 2 right-justified, " Industry sector
         62 sy-vline,
         66 wa-mat_typ color 2,                " Material type - MTART
         75 sy-vline,
         78 wa-val_class color 2 right-justified, " Valuation class
         85 sy-vline,
         88 wa-base_uom color 2 right-justified, " Base UOM
         95 sy-vline,
         98 wa-mat_desc color 2 left-justified, " Material Desc
         120 sy-vline, wa-MOV_PR,                 " Standard price
         130 sy-vline, wa-STD_PR,                 " Moving price
         140 sy-vline, wa-plant,                     " Plant
         150 sy-vline.
endloop.
write:/29 sy-uline(64).
endform.                    " F_Display_data
*&      Form F_move_data
*      Subroutine to move data from excel to internal table
* --> p1        text
* <-- p2        text
form F_move_data .
data : lv_index type i.
field-symbols <fs>.
* Sorting the internal table
sort it_excel by row col.
clear it_excel.
loop at it_excel.
move it_excel-col to lv_index.
* Assigning each record to the internal table row.
assign component lv_index of structure wa to <fs>.
* Assigning the field value to a field symbol
if lv_index eq 5.
CALL FUNCTION 'CONVERSION_EXIT_CUNIT_INPUT'
EXPORTING
    INPUT                = it_excel-value
   LANGUAGE             = SY-LANGU
IMPORTING
   OUTPUT               = char_uom.
** Moving the converted UOM to field symbol
move char_uom to <fs>.
else.
   move it_excel-value to <fs>.
endif.
at end of row.
append wa to t_matvclass.
clear wa.
endat.
endloop.
endform.                    " F_move_data
*&      Form F_get_data
*       text
* --> p1        text
* <-- p2        text
form F_get_data .
loop at t_matvclass into wa.
try.
* BAPIHEAD --- > Header Segment with Control Information
bapi_head-material = wa-material.
bapi_head-ind_sector = wa-ind_sec.
bapi_head-matl_type = wa-mat_typ.
bapi_head-account_view = 'X'.
* For Clien Data
bapi_clientdata-BASE_UOM = wa-base_uom.
bapi_clientdatax-base_uom = 'X'.
bapi_clientdatax-base_uom_iso = 'X'.
* For Valuation Class.
bapi_valclass-val_area = wa-plant.
bapi_valclass-val_class = wa-val_class.
bapi_valclass-std_price = wa-STD_PR.
bapi_valclass-MOVING_PR = wa-MOV_PR.
* For Valuation Class control checkbox.
bapi_valclassx-val_area = wa-plant.
bapi_valclassx-val_class = 'X'.
bapi_valclassx-std_price = 'X'.
bapi_valclass-MOVING_PR = 'X'.
refresh it_makt.
wa-langu = SY-LANGU.
it_makt-langu = wa-langu.
it_makt-matl_desc = wa-mat_desc.
append it_makt.
clear it_ret.
refresh it_ret.
if t_matvclass[] is initial.
write:/ 'Cannot be updated'.
else.
perform F_call_bapi.
endif.
catch CX_SY_CONVERSION_ERROR into lv_converr.
   txt_converr = lv_converr->get_text( ).
   txt_converr_l = lv_converr->get_longtext( ).
   write:/ 'Error:', txt_converr color 5.
   write:/ 'Error:', txt_converr_l color 3.
endtry.
endloop.
endform.                    " F_get_data
*&      Form F_bapi_commit
*       text
* --> p1        text
* <-- p2        text
form F_bapi_commit.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
*   WAIT          =
* IMPORTING
*   RETURN        =
if sy-subrc eq 0.
write:/2 ' Transaction commited' color 4.
else.
write:/2 'Unable to commit the transaction' color 4.
endif.
endform.                    " F_bapi_commit
*&      Form F_call_bapi
*       text
* --> p1        text
* <-- p2        text
form F_call_bapi .
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    headdata                  = bapi_head
    CLIENTDATA                 = bapi_clientdata
    CLIENTDATAX                = bapi_clientdatax
    VALUATIONDATA              = bapi_valclass
    VALUATIONDATAX             = bapi_valclassx
IMPORTING
   RETURN                     = it_ret
TABLES
   MATERIALDESCRIPTION        = it_makt
   RETURNMESSAGES        = returnm.
   IF it_ret-type eq 'E' or it_ret-TYPE eq 'S'.
     Write:/1 it_ret-type,
            8 it_ret-id,
            30 it_ret-number,
            38 it_ret-message,
            190 it_ret-parameter,
            210 it_ret-row,
            220 it_ret-field.
   endif.
endform.                    " F_call_bapi
Regards,
Ranjith N

resloved.
issue with the internal table structrue.

OBYC - BSX - Wrrong GL Assgine for a valuation class

Similar Messages

Maybe you are looking for