OC's not yet sent to CA

Hello.
First, I want to say thank you to all who contribute to the credit community here. I have learned so much from all of you.
My question: Can an OC sell the account to a CA at anytime?
I have a Cap One account that is due to fall of report in a year. What should I do/not do to ensure I do not get a new CA line?

jsantiago102 wrote:
Thank you so much.
I also have a questions regarding OC that update account to good standing vs. deleting when 7 yr. is reached. HSBC bank did just that, does the CA then drop off report?
HSBC is now reporting on TU as "Paid/ Never late."
Thsnk you again sooo much for your help. I am so happy I found this community!Settle with Cap-1 and I would try the PFD with them since its in its last year of reporting. Its highly unlikely that Cap-1 is going to change it to a paid in full current account that is a fluke that you got that from HSBC. HSBC isnt really issuing CCs in the US anymore (sold most of their portfolio to Cap-1) so it was no skin of their nose to change it. If a CA was also reporting they have to follow the OCs DoFD and it can only report for a max of 7.5 yrs from this date just like the OC can. The CRAs are the ones who typically schedule the exclusion at 7 years not the creditors. Welcome to My Fico

Similar Messages

Spool Req showing as 'not yet sent'

I have set my condition record to "Print when saving" - for my Handling Unit label. However, when i process a Goods Receipt and then check in SP01 i see the entry with status 'not yet sent' .. refreshing this does not force it to print at all.
thanks,
A.

Audrey,
Forgive me, but when I look at the requirements for "I Blogged," it shows to read and bookmark the SCN Rules of Engagement (which shows as completed) and to create a blog post (which does not show as completed). However, as you acknowledged, I have created a blog post (Focusing on Others Helps Self).
In addition, do you have any insight regarding the I Gave mission?
Thank you for your help and quick response!
Jeff

Open PO report showing "Sent" or "Not Yet Sent"

Can someone direct me to the T-Code for a report that shows what POS have been sent to the supplier and which ones have not?
Thanks for any help you can give me.

there is no such report in SAP, you have to develope it yourself
in ME9F you can do the message output, here you can select according to processing status
you can only know whether a message was created and outputted, but not whether it was sent.
Sending is something a subsystem or a human does. this activity is not recorded in the PO.
if you fax a PO message out of SAP. then the green light in the PO next to the message just tells you that SAP has succesfully given the message to the fax server. but it does not tell you whether the fax was successfully send. this can be found e.g. in SOST transaction.

I have ordered an i-pad and cancelled it the other day. I have used my indian debit for that order. So money got debited immediately. Apple has sent an email saying that it is successfully cancelled. But money is not yet credited into my account.

i have ordered an i-pad and cancelled it the other day. I have used my indian debit for that order. So money got debited immediately. Apple has sent an email saying that it is successfully cancelled. But money is not yet credited into my account. please let me know what is happening. I cancelled the order on April 9th. Its already been more than 15 days.

Your best corse of action would be to either email apple support or ring them giving them your debit I'd and the order number where they will be able to look at what's wrong and set u going on the right track

HT4863 i am receiving a message that i have reached the maximum number of messages i can send out today but i have not even sent 5 emails out yet today ?

i am receiving a message that i have reached the maximum number of messages i can send out today but i have not even sent 5 emails out yet today ?

I'll add that this can happen when snapshotting is used as a backup method. You can set max endpoints to 32 and still see the issue. Please ensure that you're backing up using the supported PowerShell commands: http://technet.microsoft.com/en-us/library/hh202170.aspx
and not just a snapshot of the VM. If raising max endpoints does not resolve the issue, try backing up with the management shell commands within a recurring scheduled task or try http://gallery.technet.microsoft.com/office/Backup-script-for-Lync-2013-aacbb9b9
. Then disable the snapshot ting for your front ends, bounce them one at a time, and ensure the data exports you've made are backed up as flat files.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

There is payment related issue, I have send you a personal message, please respond as requested.
I shall raise a request to the digital river store from where it was purchased.
I am from the Customer care Team.
Regards
Rajshree

Invitations not being sent out on Calendar Server 6.3

We would be grateful for any help on this. We can give further details if needed, please just let us know.
Thanks very much.
Issue:
To our customers the calendars server appears to be fully operational and without error. However, when a customer creates a new event and invites other people to attend, no invites are sent out. The event creator, however, believes all is in order as no error messages appear and the list of invitees appears on the event. This was working recently. We have looked for things which have changed (e.g. disk space, size of files, corruption, recent patching, licenses expiring, etc) but have not yet found anything that has changed.
Some details of our system:
./cal/sbin/csversion
Oracle Communications Calendar Server 6.3-27.01 (built Feb 15 2011)
SunOS xxxx 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V440
In /var/opt/SUNWics5/logs/watcher.log , we get these notices and errors when we restart the service.
[20/Feb/2012:12:35:56 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:35:56 +1300] (Notice) Connecting to watcher ...
[20/Feb/2012:12:36:00 +1300] (Notice) 7698
[20/Feb/2012:12:36:00 +1300] (Notice) Stopping http server 7704 ..... done
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping http server 7705 ... done
[20/Feb/2012:12:36:02 +1300] (Notice) admin server is not running
[20/Feb/2012:12:36:02 +1300] (Notice) Stopping store server 7700 ............................................................... timeout
[20/Feb/2012:12:37:03 +1300] (Error) Cannot stop server store with SIGTERM, now retrying with SIGKILL
[20/Feb/2012:12:37:03 +1300] (Notice) Stopping store server 7700 ..... done
[20/Feb/2012:12:37:05 +1300] (Notice) Starting store server .... 7718
[20/Feb/2012:12:37:05 +1300] (Notice) Checking store server status ..... ready
[20/Feb/2012:12:37:07 +1300] (Notice) Starting admin server ....Watched 'csadmind' process 7725 exited abnormally
7725
[20/Feb/2012:12:37:08 +1300] (Notice) Starting http server ....[20/Feb/2012:12:37:08 +1300] (Notice) Received request to restart: store admin http
[20/Feb/2012:12:37:08 +1300] (Notice) Connecting to watcher ...
... 7727
[20/Feb/2012:12:37:13 +1300] (Notice) 7698
[20/Feb/2012:12:37:13 +1300] (Error) store failed twice in 600 seconds, will not perform restart
Watched 'csadmind' process 7844 exited abnormally
What we've done:
We have run db_verify and csdb -v check on the databases. ics50deletelog.db did have corruption, so we fixed that by using db_dump and db_load to export then import the databases.
We also purged the ics50deletelog.db database using cspurge afterwards when the dump and load didn't seem to have had an effect.
We tried putting the log level up in the /opt/SUNWics5/cal/config/ics.conf , but didn't get any more details when restarting the service (through /etc/init.d/sunwics5 restart)
Before we did the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1465503744
Total number of calendars: 14964
Total number of events: 830842
Total number of tasks: 17351
Total number of alarms: 57181
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 79262
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
After the db_dump, db_load and purge:
Calendar database version: 4.0.0
Sleepycat Software: Berkeley DB 4.2.52: (December 3, 2003)
Total database size in bytes: 1201864704
Total number of calendars: 14964
Total number of events: 830845
Total number of tasks: 17351
Total number of alarms: 55116
Total number of gse entries: 9
Total number of master component entries: 24100
Total number of deletelog entries: 1779967
Total logfile size in bytes: 5251612
Session database version: 3.0.0 [BerkeleyDB]
Total database size in bytes: 0
Total logfile size in bytes: 0
Counter database version: 1.0.0 [Memory Mapped Files]
Total database size in bytes: 0
Thanks again.

Sounds like we talking about 'Event Invitations Notifications'. These are the notifications that gets sent when some one invite you to an event. Whether you receive the notification or not depends on your preference that is stored in ldap. This can be set using the Convergence by navigating through Options-> Calendar -> Notifcations (Check "Notify me via email of new invitations or invitation changes"). The actual ldap attributes that gets stored in user's entry is below.
icsExtendedUserPrefs: ceNotifyEnable=1
icsExtendedUserPrefs: ceNotifyEmail=[email protected]
In the following cases, the user (attendee) will not get notifications even if the above preference is set.
a> Creating an event with attendees in the past. CS6, by default, suppresses notifications for past events. You can enable notifications for past events by setting the config "ine.pastnotification.enable" to "yes" in ics.conf
b> If the client creating the event requests server not to send notifications. (smtpNotify wcap param for storeevents.wcap). Outlook Connector uses this wcap param, so you won't get server notifications for the events invited using Outlook Connector. Outlook Connector sends it's own notifications directly.
I think, you are looking for these kind of notifications. The process responsible for sending these notifications is "csadmind" on the Frontend. So, you need to check admin.log on the Frontend to see if it is sending notifications or not.
Edited by: dabrain on Feb 21, 2012 9:26 AM

This Apple ID has not yet been used with the iTunes Store.

Hello. I want to download and install Xcode 4 in my new Mac Book Pro from Apple Store. I did the following:
1. I tried to sign in using the Apple Store application.
2. After provinding my Apple ID and my password I got the awful message "This Apple ID has not yet been used with the iTunes Store."
3. I was sent to a form to review my ID, my password and my secret question. I provided missing information and pressed Continue.
4. I was sent to a form to fill out my credit card's information and I got stuck here because the Continue button never activates.
I am quite angry with this "modern" process. These are my complains:
1. Why not to download the .dmg and .pkg files from the homepage as in previous years?
2. Why is not my stupid ID recognized or associated to iTunes Store?
3. Why doesn't the Continue button activate?
This poblem occurs both in the US Store and MX Store. I am really annoyed because of this show-stopper problem. Is there any means of downloading Xcode 4 as a .dmg file?
Thanks in advance. Kindest regards.
T.

Type in the 4 digit pin for your credit card.

IMAP Default Folders are "Not Yet Available"

Ok, I have exausted all of my troubleshooting abilities (I even turned it off and back on!)
I have three IMAP email accounts hosted on a server at Site5. I can login, get mail, send mail, etc. But the "Default Folders" are listed as "Not yet available." meaning I can't specify a sent folder, trash folder, etc.
The odd thing is that the pre IS getting a folder list from the server. On the main folder view, when I pull down the folder list for a specific account, I see ALL the folders, Inbox, Outbox, Drafts, Junk, Sent, Trash, etc. It even syncs the contents.
I have removed and re-added these accounts a number of times. All with the same results.
I have a friend that also has a pre and Site5 accts. He CAN setup his IMAP default folders. Everything I can see looks identical between his settings and mine.
The Site5 server is running Courier IMAP if that helps any troubleshooting. When I telnet into the mail server I get:
OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2008 Double Precision, Inc. See COPYING for distribution information.
Running WebOS Version 1.2.1 (Problem existed on 1.2.0) I never tried on 1.1.
I'm moderately computer literate, so if anyone wants to help me tackle this problem, I have no problem running some commands in a SSH terminal (on the Pre, or the server.) But you might have to tell me specifically what to enter.
thanks,
Craig
Post relates to: Pre p100eww (Sprint)

Please direct any more comments on this issue to the thread linked above. This will focus the discussion to one area.
Thread closed.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

PC Suite 6.8 will not store sent items

Hello, I have updated to PC Suite 6.8 - Now when I send messages from the PC they are sent and are received OK. But will not store in sent items on the PC or the phone, yet when I send them from the phone they do store on the PC and the phone. Has anyone else had this frustrating problem? XP Pro Version 2002 SP2 same problem on 6230 and 6230i PC Suite 6.8 Bluetooth

Hello, Well where should I start. I've had considerable trouble with this problem. With a Nokia 6230 I had it working perfectly, then I updated to a later version of PC Suite and it stopped saving sent items. I checked the discussion group and some people said PC Suite does not save Sent Items. I checked with Nokia Australia and they said the same thing - even though I knew I had it working earlier??? I kept reinstalling PC Suite and miraculously the feature came back???? I then used the phone and PC Suite for about six months without any problems.
I now have a new 6120 Classic with a USB cable and everything works beautifully.

DataPackage1:arrived in BW, Processing 2nd processing step not yet finished

Hi BI-experts!
I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
The Loading process is hanging in processing step u201CSERVICE APIu201D.
The process in hanging in status "yellow" and then changed after a while to status u201Credu201D.
[0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
The following steps within Load process are yellow and then red:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one tell me whether my distribution model or other settings are wrong?
I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
Thank you very much!
Holger

Hi!
Many thanks for your response.
The tcode WE05 on source system showing the following:
Inbox IDoc's: RSQRST (amount: 1)
Outbound IDoc's: RSINFO (amount: 4)
When I go to SAP BW System (tcode WE05) i cannot detect any Inbound IDOC's of message type RSINFO.
What is wrong in my configuration?
Thank you very much!

Client not yet reported

Hello,
Setup a new Windows Server 2008 Standard R2 domain with WSUS.
Added a new OU & linked a WSUS GPO to it.
Added one Windows 7 Pro 64 bit test client to the domain & moved it to the OU.
Confirmed WSUS sees the client machine under both 'All Computers' & 'Unassigned Computers' but with a 'not yet reported' status.
Successfully ran ALL the steps in this article below including wuauclt.exe /resetauthorization /detectnow and it's been over an hour but still not change in status.
http://technet.microsoft.com/en-us/library/cc708627(v=ws.10).aspx
Should I give it more time and see or are there other steps I should take instead?
Thanks

Hi Steven,
I have completed a rebuild of my test client (Windows 7 Pro 64 bit) and then:
- Connected to internet & installed one round of 29 windows updates
- joined the client to my Windows 2008 domain
- moved the client to my WSUS OU, replicated to all DC's
- successfully ran gpupdate /force
- Successfully ran ALL the steps in this article below including wuauclt.exe
/resetauthorization /detectnowand
http://technet.microsoft.com/en-us/library/cc708627(v=ws.10).aspx
- as mentioned yesterday, the MS Report Viewer Redistributable 2008 is indeed installed however still
has the 'not reported' status
- attempted a client shutdown a few times and no updates are installing
Below is a snapshot of the client's windowsupdate.log after it's connected to the WSUS server for your review:
2014-10-03 10:06:01:324 948 b7c Agent * WSUS server: http://192.168.5.250 (Changed)
2014-10-03 10:06:01:324 948 b7c Agent * WSUS status server: http://192.168.5.250 (Changed)
2014-10-03 10:06:01:324 948 b7c Agent * Target group: (Unassigned Computers) (Unchanged)
2014-10-03 10:06:01:324 948 b7c Agent * Windows Update access disabled: No (Unchanged)
2014-10-03 10:06:01:324 948 b7c AU AU received policy change subscription event
2014-10-03 10:06:01:324 948 b7c AU Sus server changed through policy.
2014-10-03 10:06:01:324 948 b7c AU AU Options changed from policy.
2014-10-03 10:06:01:324 948 b7c AU Successfully wrote event for AU health state:0
2014-10-03 10:06:01:324 948 b7c AU ########### AU: Policy change processed ###########
2014-10-03 10:06:01:324 948 b7c AU # Policy changed, AU refresh required = No
2014-10-03 10:06:01:324 948 b7c AU # WSUS server: http://192.168.5.250
2014-10-03 10:06:01:324 948 b7c AU # Detection frequency: 22
2014-10-03 10:06:01:324 948 b7c AU # Approval type: Pre-install notify (Policy)
2014-10-03 10:06:01:324 948 b7c AU # Auto-install minor updates: No (User preference)
2014-10-03 10:06:01:324 948 b7c AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-03 10:06:01:324 948 b7c AU AU Refresh required....
2014-10-03 10:06:01:324 948 b7c AU AU setting next detection timeout to 2014-10-03 14:06:01
2014-10-03 10:06:01:324 948 b7c AU AU setting next featured software notification timeout to 2014-10-03 14:06:01
2014-10-03 10:06:01:324 948 b7c AU Successfully wrote event for AU health state:0
2014-10-03 10:06:01:324 948 b7c AU Triggering Online detection (non-interactive)
2014-10-03 10:06:01:324 948 b7c AU #############
2014-10-03 10:06:01:324 948 b7c AU ## START ## AU: Search for updates
2014-10-03 10:06:01:324 948 b7c AU #########
2014-10-03 10:06:01:324 948 b7c AU <<## SUBMITTED ## AU: Search for updates [CallId = {5F86BBA3-A9B2-4532-AF69-A7D67881E8B2}]
2014-10-03 10:06:01:324 948 eb4 Agent *************
2014-10-03 10:06:01:324 948 eb4 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:06:01:324 948 eb4 Agent *********
2014-10-03 10:06:01:324 948 eb4 Agent * Online = Yes; Ignore download priority = No
2014-10-03 10:06:01:324 948 eb4 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-03 10:06:01:324 948 eb4 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-10-03 10:06:01:324 948 eb4 Agent * Search Scope = {Machine}
2014-10-03 10:06:01:324 948 eb4 Setup Checking for agent SelfUpdate
2014-10-03 10:06:01:324 948 eb4 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-10-03 10:06:01:324 948 eb4 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-10-03 10:06:01:340 948 b7c AU AU received handle event
2014-10-03 10:06:01:355 948 eb4 Misc Microsoft signed: Yes
2014-10-03 10:06:08:527 948 eb4 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-10-03 10:06:08:543 948 eb4 Misc Microsoft signed: Yes
2014-10-03 10:06:08:543 948 eb4 Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab are not trusted: Error 0x800b0001
2014-10-03 10:06:08:543 948 eb4 Setup WARNING: SelfUpdate check failed to download package information, error = 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Setup FATAL: SelfUpdate check failed, err = 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Agent * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Agent * WARNING: Exit code = 0x800B0001
2014-10-03 10:06:08:543 948 eb4 Agent *********
2014-10-03 10:06:08:543 948 eb4 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:06:08:543 948 eb4 Agent *************
2014-10-03 10:06:08:543 948 eb4 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-10-03 10:06:08:543 948 eb4 Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:06:08:543 948 c98 AU >>## RESUMED ## AU: Search for updates [CallId = {5F86BBA3-A9B2-4532-AF69-A7D67881E8B2}]
2014-10-03 10:06:08:543 948 c98 AU # WARNING: Search callback failed, result = 0x800B0001
2014-10-03 10:06:08:543 948 c98 AU # WARNING: Failed to find updates with error code 800B0001
2014-10-03 10:06:08:543 948 c98 AU #########
2014-10-03 10:06:08:543 948 c98 AU ## END ## AU: Search for updates [CallId = {5F86BBA3-A9B2-4532-AF69-A7D67881E8B2}]
2014-10-03 10:06:08:543 948 c98 AU #############
2014-10-03 10:06:08:543 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:06:08:543 948 c98 AU AU setting next detection timeout to 2014-10-03 19:06:08
2014-10-03 10:06:08:543 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:06:08:543 948 c98 AU AU setting pending client directive to 'Install Approval'
2014-10-03 10:06:08:543 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:06:13:504 948 eb4 Report REPORT EVENT: {D0013D8C-171B-4102-9C2D-4D917C5558A6} 2014-10-03 10:06:08:543-0400 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 800b0001 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-10-03 10:06:13:520 948 eb4 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-10-03 10:06:13:520 948 eb4 Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-10-03 10:06:13:520 948 eb4 Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:06:23:459 948 b7c AU Launched new AU client for directive 'Install Approval', session id = 0x1
2014-10-03 10:09:30:104 948 53c AU Triggering AU detection through DetectNow API
2014-10-03 10:09:30:104 948 53c AU Triggering Online detection (non-interactive)
2014-10-03 10:09:30:104 948 b7c AU #############
2014-10-03 10:09:30:104 948 b7c AU ## START ## AU: Search for updates
2014-10-03 10:09:30:104 948 b7c AU #########
2014-10-03 10:09:30:104 948 b7c AU <<## SUBMITTED ## AU: Search for updates [CallId = {20D490B8-34AB-4F35-B591-7DE6E3334A29}]
2014-10-03 10:09:30:104 948 eb4 Agent *************
2014-10-03 10:09:30:104 948 eb4 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:09:30:104 948 eb4 Agent *********
2014-10-03 10:09:30:104 948 eb4 Agent * Online = Yes; Ignore download priority = No
2014-10-03 10:09:30:104 948 eb4 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-03 10:09:30:104 948 eb4 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-10-03 10:09:30:104 948 eb4 Agent * Search Scope = {Machine}
2014-10-03 10:09:30:104 948 eb4 Setup Checking for agent SelfUpdate
2014-10-03 10:09:30:104 948 eb4 Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-10-03 10:09:30:104 948 eb4 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-10-03 10:09:30:119 948 eb4 Misc Microsoft signed: Yes
2014-10-03 10:09:30:119 948 eb4 Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab are not trusted: Error 0x800b0001
2014-10-03 10:09:30:119 948 eb4 Setup WARNING: SelfUpdate check failed to download package information, error = 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Setup FATAL: SelfUpdate check failed, err = 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Agent * WARNING: Skipping scan, self-update check returned 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Agent * WARNING: Exit code = 0x800B0001
2014-10-03 10:09:30:119 948 eb4 Agent *********
2014-10-03 10:09:30:119 948 eb4 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-10-03 10:09:30:119 948 eb4 Agent *************
2014-10-03 10:09:30:119 948 eb4 Agent WARNING: WU client failed Searching for update with error 0x800b0001
2014-10-03 10:09:30:119 948 c98 AU >>## RESUMED ## AU: Search for updates [CallId = {20D490B8-34AB-4F35-B591-7DE6E3334A29}]
2014-10-03 10:09:30:119 948 c98 AU # WARNING: Search callback failed, result = 0x800B0001
2014-10-03 10:09:30:119 948 c98 AU # WARNING: Failed to find updates with error code 800B0001
2014-10-03 10:09:30:119 948 c98 AU #########
2014-10-03 10:09:30:119 948 c98 AU ## END ## AU: Search for updates [CallId = {20D490B8-34AB-4F35-B591-7DE6E3334A29}]
2014-10-03 10:09:30:119 948 c98 AU #############
2014-10-03 10:09:30:119 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:09:30:119 948 c98 AU AU setting next detection timeout to 2014-10-03 19:09:30
2014-10-03 10:09:30:119 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:09:30:119 948 c98 AU Successfully wrote event for AU health state:0
2014-10-03 10:09:35:110 948 eb4 Report REPORT EVENT: {2F7F2F87-9433-452B-9370-39293B41661A} 2014-10-03 10:09:30:119-0400 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 800b0001 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2014-10-03 10:09:35:110 948 eb4 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-10-03 10:09:35:110 948 eb4 Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2014-10-03 10:09:35:110 948 eb4 Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:10:13:485 948 eb4 PT WARNING: Cached cookie has expired or new PID is available
2014-10-03 10:10:13:485 948 eb4 PT Initializing simple targeting cookie, clientId = 6a090254-caeb-4241-a3cc-48a39310f2e2, target group = , DNS name = hp2560p-bob.usdecnmpf.org
2014-10-03 10:10:13:485 948 eb4 PT Server URL = http://192.168.5.250/SimpleAuthWebService/SimpleAuth.asmx
2014-10-03 10:10:13:765 948 eb4 Report Uploading 2 events using cached cookie, reporting URL = http://192.168.5.250/ReportingWebService/ReportingWebService.asmx
2014-10-03 10:10:13:765 948 eb4 Report Reporter successfully uploaded 2 events.
2014-10-03 10:30:09:852 948 b7c AU AU received handle event
2014-10-03 10:30:09:852 948 b7c AU AU setting pending client directive to 'Install Approval'
2014-10-03 10:30:12:049 948 b7c Shutdwn user declined update at shutdown
2014-10-03 10:30:12:049 948 b7c AU Successfully wrote event for AU health state:0
2014-10-03 10:30:12:049 948 b7c AU AU initiates service shutdown
2014-10-03 10:30:12:049 948 b7c AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-03 10:30:12:330 948 b7c Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:30:12:361 948 b7c Service *********
2014-10-03 10:30:12:361 948 b7c Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-03 10:30:12:361 948 b7c Service *************
2014-10-03 10:32:36:077 924 cfc Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-10-03 10:32:36:077 924 cfc Misc = Process: C:\Windows\system32\svchost.exe
2014-10-03 10:32:36:093 924 cfc Misc = Module: c:\windows\system32\wuaueng.dll
2014-10-03 10:32:36:077 924 cfc Service *************
2014-10-03 10:32:36:093 924 cfc Service ** START ** Service: Service startup
2014-10-03 10:32:36:093 924 cfc Service *********
2014-10-03 10:32:36:155 924 cfc Agent * WU client version 7.6.7600.256
2014-10-03 10:32:36:155 924 cfc Agent * Base directory: C:\Windows\SoftwareDistribution
2014-10-03 10:32:36:155 924 cfc Agent * Access type: No proxy
2014-10-03 10:32:36:155 924 cfc Agent * Network state: Connected
2014-10-03 10:33:22:084 924 cfc Report CWERReporter::Init succeeded
2014-10-03 10:33:22:084 924 cfc Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-03 10:33:22:084 924 cfc Agent *********** Agent: Initializing global settings cache ***********
2014-10-03 10:33:22:084 924 cfc Agent * WSUS server: http://192.168.5.250
2014-10-03 10:33:22:084 924 cfc Agent * WSUS status server: http://192.168.5.250
2014-10-03 10:33:22:084 924 cfc Agent * Target group: (Unassigned Computers)
2014-10-03 10:33:22:084 924 cfc Agent * Windows Update access disabled: No
2014-10-03 10:33:22:084 924 cfc DnldMgr Download manager restoring 0 downloads
2014-10-03 10:33:22:084 924 cfc AU ########### AU: Initializing Automatic Updates ###########
2014-10-03 10:33:22:084 924 cfc AU # WSUS server: http://192.168.5.250
2014-10-03 10:33:22:084 924 cfc AU # Detection frequency: 22
2014-10-03 10:33:22:084 924 cfc AU # Approval type: Pre-install notify (Policy)
2014-10-03 10:33:22:084 924 cfc AU # Auto-install minor updates: No (User preference)
2014-10-03 10:33:22:084 924 cfc AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-03 10:33:22:099 924 cfc Agent WARNING: Failed to get deployment data from data store, error 80248007
2014-10-03 10:33:22:099 924 cfc Agent WARNING: Failed to get deployment data from data store, error 80248007
2014-10-03 10:33:22:162 924 cfc Report *********** Report: Initializing static reporting data ***********
2014-10-03 10:33:22:162 924 cfc Report * OS Version = 6.1.7600.0.0.65792
2014-10-03 10:33:22:162 924 cfc Report * OS Product Type = 0x00000030
2014-10-03 10:33:22:162 924 cfc Report * Computer Brand = Hewlett-Packard
2014-10-03 10:33:22:162 924 cfc Report * Computer Model = HP EliteBook 2560p
2014-10-03 10:33:22:177 924 cfc Report * Bios Revision = 68SSU Ver. F.50
2014-10-03 10:33:22:177 924 cfc Report * Bios Name = Default System BIOS
2014-10-03 10:33:22:177 924 cfc Report * Bios Release Date = 2014-08-04T00:00:00
2014-10-03 10:33:22:177 924 cfc Report * Locale ID = 1033
2014-10-03 10:33:22:177 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:33:22:177 924 cfc AU Initializing featured updates
2014-10-03 10:33:22:177 924 cfc AU Found 0 cached featured updates
2014-10-03 10:33:22:177 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:33:22:177 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:33:22:177 924 cfc AU AU finished delayed initialization
2014-10-03 10:33:27:184 924 2bc Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:57:03:039 924 cfc Shutdwn user declined update at shutdown
2014-10-03 10:57:03:039 924 cfc AU Successfully wrote event for AU health state:0
2014-10-03 10:57:03:039 924 cfc AU AU initiates service shutdown
2014-10-03 10:57:03:039 924 cfc AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-03 10:57:03:320 924 cfc Report CWERReporter finishing event handling. (00000000)
2014-10-03 10:57:03:320 924 cfc Service *********
2014-10-03 10:57:03:320 924 cfc Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-03 10:57:03:320 924 cfc Service *************
2014-10-03 10:59:27:048 948 324 Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-10-03 10:59:27:048 948 324 Misc = Process: C:\Windows\system32\svchost.exe
2014-10-03 10:59:27:048 948 324 Misc = Module: c:\windows\system32\wuaueng.dll
2014-10-03 10:59:27:048 948 324 Service *************
2014-10-03 10:59:27:048 948 324 Service ** START ** Service: Service startup
2014-10-03 10:59:27:064 948 324 Service *********
2014-10-03 10:59:27:126 948 324 Agent * WU client version 7.6.7600.256
2014-10-03 10:59:27:126 948 324 Agent * Base directory: C:\Windows\SoftwareDistribution
2014-10-03 10:59:27:126 948 324 Agent * Access type: No proxy
2014-10-03 10:59:27:126 948 324 Agent * Network state: Connected

How can i check for posted but not yet commited changes in a form

Dears
I make changes programmatically in a form then i post it using (Post built in).
If the user exits the form, i make check for any changes in the form to commit it using the system variable :system.form_status
Unfortunately the value of this system variable is 'Query' not 'Changed' because of using the post built in.
Is ther another system variable ( or any another way ) that check for posted but not yet commited changes in the form ?
Thanks a lot
Mostafa Abolaynain

I had faced similar situation. Using of package variable which identifies, what is the user's latest action.
This is just a workaround.
Capture what the user has performed into a variable say, PKG_VAR.ACTION,
This will be assigned values like List L, and Create C, Update U and Saved S.
If commit is executed,assing the status S to the variable.
So while closing,
IF :system.form_status = 'CHANGED' or PKG_VAR.ACTION in ('C','U') THEN
-- validate the data, n perform commit.
else
-- just close the form.
end if;
Regards
Deepz : )

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

OC's not yet sent to CA

Similar Messages

Maybe you are looking for