OC4J 10.1.3 preview 4 cluster database replication is not working...

Hi,
We are trying to run OC4J 10.1.3 preview 4 standalone server in a cluster mode enabling database replication to persist session details during restarts.
We have created the following:
- JDBC Connection pool
- JDBC data source
- An entry in the application.xml for <cluster><protocol><.... </cluster>
But it does seem to be working.
And there is no change in stdout or stderr console log as well.
It will be really helpful if you send your comments or answers if anybody have have implemented this succefully before!!
Regards,
DGKM

gday DGKM --
I can confirm that this works with the DP4 build.
The easiest way to make sure you get the right entries are to configure this via the "clustering" wizard in Application Server Control at the end of the deployment process.
So I'd recommend deploying the application again using ASC and using the cluster task, setting the protocol to be Database and specifying the datasource to use.
cheers
-steve-

Similar Messages

Creation of a Database Schema is not working (Into a Sync Group)

Hello,
We have in: Sql Databases > Sync > Sync Group, a group called "SyncGroupViviendasProyectosVentasPruebas"
If we go to "Sync Rules" and click "DEFINE SYNC RULES", no matter the databse we choose (there are 2), when we click in "REFRESH
THE DATABASE SCHEMA" it dont works!
It seems to be working but minutes later there is no Schema created.
Why? Why the Create Database Schema is not working?
Thanks,

The detail error log from our service backend is:
'Type=Microsoft.SqlServer.Management.Sdk.Sfc.InvalidVersionEnumeratorException,Message=Operation not supported on version 11.0 SqlAzureDatabase.,Source=Microsoft.SqlServer.SqlEnum,StackTrace=   at Microsoft.SqlServer.Management.Smo.XmlReadDoc.LoadFile(Assembly
a, String strFile)
   at Microsoft.SqlServer.Management.Smo.SqlObject.LoadInitDataFromAssemblyInternal(Assembly assemblyObject, String file, ServerVersion ver, String alias, StringCollection requestedFields, Boolean store,
StringCollection roAfterCreation, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Smo.SqlObject.LoadInitData(String file, ServerVersion ver, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Sdk.Sfc.ObjectCache.LoadElement(ObjectLoadInfo oli, ServerVersion ver, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Sdk.Sfc.ObjectCache.GetElement(ObjectLoadInfo oli, ServerVersion ver, DatabaseEngineType databaseEngineType)
   at Microsoft.SqlServer.Management.Sdk.Sfc.ObjectCache.GetAllElements(Urn urn, ServerVersion ver, DatabaseEngineType databaseEngineType, Object ci)
   at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetObjectsFromCache(Urn urn, Object ci)
   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
   at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request),'
It might be a collation/SMO issue after I do some research, so may I know that have you change the collation of you SQL Azure database? If yes, please try to use default collation and try again.
Regards,
Bowen

My database connectivity is not working inspite of installing sql express

My database connectivity is not working inspite of installing sql express ...what should I do so that my database works

Hello karan7,
In addition to pvdg's post, can you reproduce this issue with a new fresh database? If you can this means it is a SQL Setup related problem. If you cannot, your database file may already corrupt.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Azure geo-replication does not work - Feature is disabled

When I try and add geo-replication to a database (s0) in which is on the east coast (tried both the azure management console and the azure portal); it creates the west coast server and
I guess the next step is to create the replicattion database., but it fails. The error I get is "Feature is disabled" and does not create the database
Any idea what feature needs to be enabled for this to work? the entire process seems pretty click forward., no idea why it would fail.
Edit: details on error
OPERATIONNAME: Update
SQL database
Status: Failed
SUBSTATUS: Bad
Request (HTTP Status Code: 400)
Level: Error
PROPERTIES: statusCode:BadRequest
statusMessage:{"code":"45150","message":"Feature is disabled.","target":null,"details":[{"code":"45150","message":"Feature is disabled.","target":null,"severity":"16"}],"innererror":[]}

Hi,
Thanks for posting here.
I suggest you to check this link.
Standard Geo-Replication for Azure SQL Database:
http://msdn.microsoft.com/en-us/library/azure/dn758204.aspx
http://blogs.technet.com/b/blainbar/archive/2014/08/12/step-by-step-azure-sql-database-introduces-geo-restore-standard-geo-replication-and-auditing.aspx
peer 2 peer replication is not supported on standard edition, but bi-directional replication is. Here is a tutorial on how to make this work.
http://sqlblog.com/blogs/hilary_cotter/archive/2011/10/28/implementing-bi-directional-transactional-replication.aspx
Hope this helps you.
Girish Prajwal

Cluster Health Monitor Links not working

Is anyone else having an issue downloading the cluster health monitor?
I keep receiving content not found. I have a pre 11.2 database that I would like to give this a test run on.
Thank you

user7002963 wrote:
Is anyone else having an issue downloading the cluster health monitor?
I keep receiving content not found. I have a pre 11.2 database that I would like to give this a test run on.
Thank youThats right, i tried and its not working.
Possible workaround: Call oracle global support. You'll get the link in google.
Or
Raise an SR with support.oracle.com if you have valid CSI
The latest copy of Cluster Health Monitor (IPD/OS) is always with the install image if the version is 11.2.0.2 or greater

DDL replication is not working...

Hi,
The Database version we are using is 11.2.0.2.0 and Golden gate is 11.2.1.0.1. We are having a Hub and spoke environment where Hub and spoke schema's are in different servers.The DML replication is working fine but when we enable DDL replication the replication is not happening like when the table got created in Hub schema the same is not replicated in Spoke.
Kindly let us know if we miss anything or how to go ahead with it.
Thanks in Advance.
Regards,
Raj

Hi Stevencallan,
Thanks for your response.
We are replicating between one Hub and spoke environment only. Our requirement is the tables/packages will be created in Hub environment at run time and it need to be replicated at spoke. Whether DDL replication allows such replications?
Kindly provide some detail information which will really help us .
Thanks in Advance.
Regards,
Raj

SQL Server 2012 Database Email is not working with AWS SES Services

Hi Greetings to all,
I have issue with the SQL Server Database mail Services. I have Configured Amazon Simple Email Services (AWS SES) as db profile in SQL Server and for last 2 years its working perfectly. But, from last two days on wards it is not working properly the Emails
are queued but not sent to the recipients. the SES Services are working fine in outlook. but, not working in SQL Server.
Please help on this. tried changing the ports no result only one or two emails only sent remaining are failing.the info messages is as below
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 10 (2015-04-10T17:12:41). Exception Message: Cannot send mails to mail server. (The operation has timed out.).
RehaanKhan. M

Hello,
Try to use port 465, port 2587 or port 587 instead of using port 25, as explained on the following articles.
http://docs.aws.amazon.com/ses/latest/DeveloperGuide/smtp-issues.html
http://docs.aws.amazon.com/ses/latest/DeveloperGuide/smtp-connect.html
The first of above URLs is intended for troubleshooting SMTP issues in general.
Verify you the mail account has not reached any limit. Limit of emails per day, per second, etc.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

The preview in browser function is not working in DW CC 2014.1

I just installed WAMP 2.5 on my local Win 8.1 machine. All files transfer to the test server fine and all is working. However, when I open pages from Dreamweaver in preview I get a URL not found error. The pages open fine in all browsers when I open them directly in Windows Explorer. I changed the HOSTS file in windows as recommended in the WAMP 2.5 setup for using virtual hosts as follows:
127.0.0.1       localhost
127.0.0.1       project1
127.0.0.1 sttest.dev
::1 localhost
::1 project1
::1 sttest.dev
where sttest is my local website project folder for the test server.
Any help or ideas would be appreciated.
Thanks!

I figured our the problem. In WAMP if you're using Virtual Hosts, you have to point to a folder under the www folder either in the WAMP main folder or other spot. I had designated a Project1 localhost, but had failed to create a Project1 folder under the c:\WAMP\www folder. So I set up a more specific folder as c:\WAMP\www\STTest1 as a project folder and then edited my HOSTS file to:
127.0.0.1       localhost
127.0.0.1       sttest1
::1 localhost
::1 sttest1
Since I had previously had 127.0.0.1    Project1 statement in my HOSTS file but no Project1 folder, the Dreamweaver could not find the html page on my local server.   So for now, all is good.

Other database delete is not working on forall statement

Dear all,
My scenario is , i create a program, the program fetch the data from database x and i want to delete on the same x database but i am running this program at y database, so
so i created a view
create or replace view vw_ibs_pda_bills_x as
SELECT *
        FROM ibs_pda_bills_x@testarch1my program
Declare
      CURSOR c2 IS
      SELECT *
        FROM vw_ibs_pda_bills_x
       WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
       opr varchar2(10) := 'DELETE';
      TYPE tsch IS TABLE OF c2%ROWTYPE;
      vtsch      tsch;
      cnt        NUMBER := 0;
      stime      NUMBER;
      etime      NUMBER;
      DURATION   NUMBER;
      rcount     NUMBER;
      errorsd   PLS_INTEGER;
      ecode     NUMBER;
      val1   VARCHAR2 (100);
      val2   VARCHAR2 (100);
      val3   VARCHAR2 (100);
      val4   VARCHAR2 (100);
   BEGIN
      BEGIN
         stime := DBMS_UTILITY.get_time ();
         OPEN c2;
         LOOP
            FETCH c2
            BULK COLLECT INTO vtsch LIMIT 1000;
            IF vtsch.COUNT = 1000
            THEN
               cnt := cnt + 1;
            END IF;
        If opr = 'INSERT' Then
                FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                      INSERT INTO dlul.ibs_pda_bills
                    VALUES vtsch (i);
        Else
                FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                    Delete from vw_ibs_pda_bills_x where bill_month = vtsch(i).bill_month;
        End if;
            EXIT WHEN c2%NOTFOUND;
         END LOOP;
         etime := DBMS_UTILITY.get_time ();
         DURATION := ((etime - stime) / 100) / 60;
         rcount :=
             (cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
     If opr = 'INSERT' Then
         INSERT INTO process_stage_log
              VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
     Else
         INSERT INTO process_stage_log
              VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
     End if;
         CLOSE c2;
         COMMIT;
      EXCEPTION
         WHEN OTHERS
         THEN
            errorsd := SQL%BULK_EXCEPTIONS.COUNT;
            IF errorsd > 0
            THEN
               FOR j IN 1 .. errorsd
               LOOP
                  ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
                  val1 :=
                       vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
                  val2 :=
                       vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
                  val3 :=
                     vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
                  val4 :=
                     vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
              If opr = 'INSERT' Then
                  INSERT INTO process_error_log
                       VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                               'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
          Else
                  INSERT INTO process_error_log
                       VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                               'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
          End if;
               END LOOP;
            END IF;
      END;
   END pda_insert;the program want to do the delet option for all delete is not working. The program executed successful but the operation delete is not happening
how to solve this issue.
please help me
kanish

No error encountered in my log table
the new workaround you said, that is instead of for all , already i tried for i in 1.. to like
instead of forall delete i tried the following way
Declare
      CURSOR c2 IS
SELECT *
        FROM ibs_pda_bills_x@testarch1
       WHERE bill_month <= '31-dec-2008'; -- AND bpref_no = :cons;
       opr varchar2(10) := 'DELETE';
      TYPE tsch IS TABLE OF c2%ROWTYPE;
      vtsch      tsch;
      cnt        NUMBER := 0;
      stime      NUMBER;
      etime      NUMBER;
      DURATION   NUMBER;
      rcount     NUMBER;
      errorsd   PLS_INTEGER;
      ecode     NUMBER;
      val1   VARCHAR2 (100);
      val2   VARCHAR2 (100);
      val3   VARCHAR2 (100);
      val4   VARCHAR2 (100);
   BEGIN
      BEGIN
         stime := DBMS_UTILITY.get_time ();
         OPEN c2;
         LOOP
            FETCH c2
            BULK COLLECT INTO vtsch LIMIT 1000;
            IF vtsch.COUNT = 1000
            THEN
               cnt := cnt + 1;
            END IF;
        If opr = 'INSERT' Then
                FORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                      INSERT INTO dlul.ibs_pda_bills
                    VALUES vtsch (i);
        Else
               /* fORALL i IN 1 .. vtsch.COUNT SAVE EXCEPTIONS
                 Delete from vw_ibs_pda_bills_x where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');*/
                 for i in 1..vtsch.count loop
                   delete ibs_pda_bills_x@testarch1 where to_char(bill_month,'dd-mm-rrrr') = to_char(vtsch (i).bill_month,'dd-mm-rrrr');
                 end loop;
        End if;
            EXIT WHEN c2%NOTFOUND;
         END LOOP;
         etime := DBMS_UTILITY.get_time ();
         DURATION := ((etime - stime) / 100) / 60;
         rcount :=
             (cnt * 1000) + vtsch.COUNT - NVL (SQL%BULK_EXCEPTIONS.COUNT, 0);
     If opr = 'INSERT' Then
         INSERT INTO process_stage_log
              VALUES (SYSDATE, 'IBS_PDA_BILLS', DURATION, rcount);
     Else
         INSERT INTO process_stage_log
              VALUES (SYSDATE, 'IBS_PDA_BILLS-D', DURATION, rcount);
     End if;
         CLOSE c2;
         COMMIT;
      EXCEPTION
         WHEN OTHERS
         THEN
            errorsd := SQL%BULK_EXCEPTIONS.COUNT;
            IF errorsd > 0
            THEN
               FOR j IN 1 .. errorsd
               LOOP
                  ecode := SQL%BULK_EXCEPTIONS (j).ERROR_CODE;
                  val1 :=
                       vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).sch_code;
                  val2 :=
                       vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bpref_no;
                  val3 :=
                     vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).bill_month;
                  val4 :=
                     vtsch (SQL%BULK_EXCEPTIONS (j).ERROR_INDEX).service_code;
              If opr = 'INSERT' Then
                  INSERT INTO process_error_log
                       VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                               'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'INSERT');
          Else
                  INSERT INTO process_error_log
                       VALUES (SYSDATE, ecode, 'IBS_PDA_BILLS', 'sch_code', val1,
                               'bpref_no', val2, 'bill_month', val3, 'service_code', val4,'DELETE');
          End if;
               END LOOP;
            END IF;
      END;
   END pda_insert;i am receiving the following error
ORA-02055: distributed update operation failed; rollback required
ORA-06531: Reference to uninitialized collection
ORA-06512: at line 77
ORA-06531: Reference to uninitialized collection
kanish

Oracle Enterprise Manager Database Control is not working properly

Hello!
I have a problem with Oracle Enterprise Manager Database Control, the web console. When I open the browser, instead of showing the login window, it shows the window where three arrows, the database instance, the listener, and the conection, that are red and down.
However they are working correctly, the database is up and working, but the EM doesn't show anything else.
Is there a way to make it work again?
Thanks!

The Enterprise Manager has lost sync with the database.
The only way I know to do this remotely is to tell the OEM to shut down and/or bring up the database - twice. It'll try and fail and perhaps eventually reset it's pointers.
I'd really like Oracle to create a 're-sync to actual state' URL ... there must be an easy way, such as flushing the collected metrics or something.

Preview program in Maverik - Spacebar not working to move image

was just forced by a program to upgrade to Maverik -- when i use PREVIEW to view images spacebar is not working in order to move the image around in the open window with the mouse to see other parts of edits etc? Bug? Just a box draws or what is the new command.. i cannot get to parts of images blow up to see what i need to see now other than opening in photoshop
thx

Is this an HTML file? Or something else?
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"VirtualKelly" <[email protected]> wrote in
message
news:f2b42f$m2l$[email protected]..
> Whenever I click on preview in browser - IE, it doesn't
work. I've tried
> pasting the link into IE, but it gives me the prompt to
open/save/cancel.
> When
> I click open, it goes back to DW window. This is the
only browser I am
> having
> difficulty with.
>
> I have only had the program loaded since Saturday and it
worked
> sporadically
> then, but now, nothing.
>
> I haven't had any IE updates or window updates.
>
> Regards.
>

Oracle 9.10 Database Configuration Assistant not working

I have installed Oracle 9i Enterprise Edition on Windows XP, Pentium 4 and everything installed successfully but after installation, when I click on Database Configuration Assistant, nothing happened, no error displayed, mouse flashed for a while as loading something then came normal. Any idea please ?
Even Database Migration Assistant also not working.
I also could not find svrmgr utility in Oracle 9i to create a new database.
Best Regards,
Luqman

The Server Manager was deprecated in 9i. Instead of using it you have to use the SQL*Plus. Do you have another JRE installed ?
How to create a database manually in 9i
Administrator's Guide for Windows Contents / Search / Index / PDF
http://download-east.oracle.com/docs/cd/B10501_01/win.920/a95491.pdf
Joel Pérez

Database Upgrade Agent not working for upgrading Oracle 9i DB to Oracle 10i

Hi All,
Presently I have completed my Oracle 10i installation on Solaris Server but I am facing an issue during the upgrade process of Oracle 9i to 10g. Whenever I try to upgrade the 9i databases to 10g using DBUA(Database Upgrade assistant) I am facing an issue that Data base not running from oracle home or pfile not found. The exact error message says:-
The upgrade assistant failed in bringing up the database XIPCOTS. Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 obtained from file /var/opt/oracle/oratab was used to connect to the database. Either the database is not running from Oracle Home /opt/apps/home/oracle9i/product/releases/92/92 or the correct Initialisation parameter file (pfile) was not found. To start the database , Oracle needs the pfile. Provide the full path name of the init file for the database XIPCOTS.
In reality the XIPCOTS database is running fine in Oracle 9i and we can connect it using PL/SQL developer in windows.I have also provided the path of pfile but it is still not accepting the same.
Path of pfile I provided :- /XIP/ofaroot/XIPCOTS/pfile/initXIPCOTS.ora
Any help or suggestions would be greately appreciated.
Our both Oracle 9i and 10g are installed on same Solaris server where solaris version is 9
Installation path for 9i :- /opt/apps/home/oracle9i/product/releases/92/92
Installation path for 10g :- /opt/apps/home/oracle/product/releases/10201
Oracle 9i version :- 9.2.0.7
Oracle 10g version :- 10.2.01
Thanks in advance.
Best Regards,
Gourav Banerjee

Can you please mention the specific folder name under oracle home where we need to put this pfile because there are two folder dbs and ds I have allready tried putting it inside dbs its not working. And my home path is correct I hope and is set for oracle 9i directories in the .oraenv file do we need to set it for oracle 10g before the DBUA upgrade.

Database Scheduled Jobs not working

Hai All,
In my database Scheduled database jobs not working , but it work manullay fine...
All parameter are correct including job_queue_processes.. Where I can start troubleshoot for this problem.
Oracle: Oracle 9.2.0.1.0
Platform : AIX
Please help ...
Shiju

did you enabled the job?Unlikely. DBMS_SCHEDULER was a 10g innovation and as the OP mentioned, they're on 9i.
Oracle: Oracle 9.2.0.1.0Cheers, APC

Preview with F 12 does not work.

In the past we could see our changed page preview with F 12 in the browser. That doesn't work any more. can we do that now ? I have Internet Explorer 11 and Dreamweaver CS3.
Thanks
Henk

Yes I had done it also with Ctrl + F12 , but that did not work too.
Now I have tried it with another very old keyboard, and I was very surprised with the old keyboard it worked. Both keyboards are from Logitech. The newest one does not work with F12 and the old one works well.
It is very annoying, but it is possible.
Thanks

OC4J 10.1.3 preview 4 cluster database replication is not working...

Similar Messages

Maybe you are looking for