OC4J 9.0.4.1.0

I use Oc4J9.0.4.1.0 for my application. When i run my application on this server the tabs donot show of. What is the reason for tabs not to show of in my jsp pages? Also, if i run the same application on 9.0.4.0.0, the jsp is proper, i mean, the tabs are shown on the jsp page.
What is the difference in the version of OC4J which causes this to happen? How can i correct this problem without migrating to OC4J9.0.4.0.0

What will be helpful here is a test case. Not sure what the issue is here but more detail (i.e. sample code) will assist in troubleshooting your issue. Are your tabs static or dynamic. Meaning depending on who you are do you get a different set of tabs? Please provide more detail.

Similar Messages

Partner application single sign-on and Oc4j

hello,
I'm trying to test portal's partner application single sign-on, following the examples inside the "Oracle9 iAS Single Sign-On Application Developers Guide":
With Tomcat as jsp engine everything works fine, but with Oc4j when I try to enter the protected jsp page i have this exception:
oracle.security.sso.enabler.SSOEnablerException: java.lang.IllegalStateException: OutputStream already retrieved
     at SSOEnablerBean.getSSOUserInfo(SSOEnablerBean.java:153)
     at SSOEnablerJspBean.getSSOUserInfo(SSOEnablerJspBean.java:57)
     at /protetta.jsp._jspService(/protetta.jsp.java:37) (JSP page line 4)
Any suggestion?
Thanks in advance.

I get the same problem with my partner application. It runs fine on JServer but I get the following problem on oc4j:
oracle.security.sso.enabler.SSOEnablerException: java.lang.IllegalStateException: OutputStream already retrieved
at oracle.br.aerochain.sso.SSOEnablerBean.getSSOUserInfo(SSOEnablerBean.java, Compiled Code)
at oracle.br.aerochain.sso.SSOEnablerJspBean.getSSOUserInfo(SSOEnablerJspBean.java, Compiled Code)
at /jsp/papp.jsp._jspService(/jsp/papp.jsp.java, Compiled Code)
at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpApplication.serviceJSP(HttpApplication.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.JSPServlet.service(JSPServlet.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java, Compiled Code)     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java, Compiled Code)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java, Compiled Code)
Did anyone get a solution for this?
TIA

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

Error while running web application through JDEV (10.1.3.0.3) in OC4J

Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
     Missing class: javax.xml.bind.JAXBContext
     Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
     Loader: oc4j:10.1.3
     Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28      at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
     at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
     at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
     at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]

Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil..

Error while running a trusted application in OC4J

I have created a trusted application to access the CDB and I can directly run this application in the Embedded OC4J and get the right result. The login code is :
public ManagersFactory loginCDB(){
FdkCredential credential = new S2SFdkCredential(
"orcladmin" , "orclapplicationcommonname=s2stestapplication,cn=ifs,cn=products,cn=oraclecontext",
"welcome1", null);
try {
session = ManagersFactory.login(credential, CDBURL);
Item user = session.getUser(null);
s_Logger.log("Connected user: "+LoggingUtils.log(user));
s_Logger.log(session.getUserManager().toString());
catch (FdkException e) {
s_Logger.log(e);
return session;
But when I deploy this application to the Local/Remote OC4J and access this application by web, the error is shown as below:
java.lang.RuntimeException:java.lang.RuntimeException: Unknown exception. See cause.
java.lang.RuntimeException: Unknown exception. See cause.
     at oracle.ifs.fdk.client.impl.AxisRemoteManagersFactory.handleException(AxisRemoteManagersFactory.java:1271)
     at oracle.ifs.fdk.client.impl.AxisRemoteManagersFactory.<init>(AxisRemoteManagersFactory.java:326)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at oracle.ifs.fdk.ManagersFactory.login(ManagersFactory.java:214)
     at oracle.ifs.fdk.ManagersFactory.login(ManagersFactory.java:121)
     at oracle.ifs.fdk.ManagersFactory.login(ManagersFactory.java:84)
     at oracle.l360.cdb.S2SLoginUtil.loginCDB(S2SLoginUtil.java:43)
     at view.backing.LearningActivity.getCdbFileList(LearningActivity.java:152)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:99)
     at oracle.adfinternal.view.faces.model.FacesPropertyResolver.getValue(FacesPropertyResolver.java:92)
     at com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:187)
     at com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:171)
     at com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:263)
     at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:160)
     at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:143)
     at javax.faces.component.UIData.getValue(UIData.java:547)
     at org.apache.myfaces.component.html.ext.HtmlDataTableHack.createDataModel(HtmlDataTableHack.java:437)
     at org.apache.myfaces.component.html.ext.HtmlDataTableHack.getDataModel(HtmlDataTableHack.java:414)
     at org.apache.myfaces.component.html.ext.HtmlDataTableHack.getRowCount(HtmlDataTableHack.java:87)
     at org.apache.myfaces.custom.datalist.HtmlListRenderer.encodeChildren(HtmlListRenderer.java:120)
     at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:721)
     at com.sun.faces.renderkit.html_basic.HtmlBasicRenderer.encodeRecursive(HtmlBasicRenderer.java:465)
     at com.sun.faces.renderkit.html_basic.GridRenderer.encodeChildren(GridRenderer.java:253)
     at javax.faces.component.UIComponentBase.encodeChildren(UIComponentBase.java:721)
     at javax.faces.webapp.UIComponentTag.encodeChildren(UIComponentTag.java:629)
     at javax.faces.webapp.UIComponentTag.doEndTag(UIComponentTag.java:566)
     at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:460)
     at mdssys.viewcontroller._public__html._LearningActivity_jspx._jspService(_LearningActivity_jspx.java:317)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:598)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:522)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.mds.jsp.MDSJSPFilter.doFilter(Unknown Source)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:286)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:50)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:192)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:197)
     at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:346)
     at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:152)
     at oracle.adfinternal.view.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:157)
     at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:107)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:137)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:214)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:100)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:228)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:197)
     at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:123)
     at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:103)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:147)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:162)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:620)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:369)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:865)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:447)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:215)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: org.apache.axis.attachments.AttachmentsImpl
     at org.apache.axis.AxisFault.makeFault(AxisFault.java:101)
     at org.apache.axis.client.Call.invoke(Call.java:1820)
     at oracle.ifs.fdk.SessionManagerSoapBindingStub.getCurrentUser(SessionManagerSoapBindingStub.java:365)
     at oracle.ifs.fdk.client.impl.AxisRemoteManagersFactory.<init>(AxisRemoteManagersFactory.java:319)
     ... 88 more
Caused by: java.lang.ClassCastException: org.apache.axis.attachments.AttachmentsImpl
     at org.apache.axis.Message.setup(Message.java:341)
     at org.apache.axis.Message.<init>(Message.java:243)
     at org.apache.axis.client.Call.invoke(Call.java:2406)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     ... 90 more
How can I resolve this problem? Do I need to config the OC4J server?
Thanks.
Message was edited by:
user564999

I am a little new to library management in this environment. I am also doing CDB Development and since the libraries are different from what is bundled with JDeveloper 10.1.3.x, I am curious, how did you end up dealing with the library conflicts in a production environment?
Also, I was under the impression that libraries defined in the application and included in the deploy (ear file) would take presidence over the "global" libraries. Is this not correct?
Thanks in advance,
Steve

Error connecting to an EJB 3.0 Remote on OC4J 10.1.3.2 from Tomcat

Hi, I want to connect to a Remote Session Bean running on the OC4J 10.1.3 and it doesn´t work.
I have connected to it from a java standalone application using:
public static void main(String [] args) {
try {
final Context context = getInitialContext();
SessionEJB sessionEJB = (SessionEJB)context.lookup("java:comp/env/ejb/SessionEJB");
System.out.println(sessionEJB.mergeEntity(""));
System.out.println( "hola" );
} catch (Exception ex) {
ex.printStackTrace();
private static Context getInitialContext() throws NamingException {
Hashtable env = new Hashtable();
// Standalone OC4J connection details
env.put( Context.INITIAL_CONTEXT_FACTORY, "oracle.j2ee.naming.ApplicationClientInitialContextFactory" );
env.put( Context.SECURITY_PRINCIPAL, "oc4jadmin" );
env.put( Context.SECURITY_CREDENTIALS, "passw" );
env.put(Context.PROVIDER_URL, "ormi://localhost:23791/ejb3jar");
return new InitialContext( env );
with this application-client.xml file:
<?xml version = '1.0' encoding = 'windows-1252'?>
<application-client xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/application-client_1_4.xsd" version="1.4" xmlns="http://java.sun.com/xml/ns/j2ee">
<display-name>Model-app-client</display-name>
<ejb-ref>
<ejb-ref-name>ejb/SessionEJB</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<remote>ar.com.eds.ejb3.model.SessionEJB</remote>
<ejb-link>SessionEJB</ejb-link>
</ejb-ref>
thats works fine, but when I try to use the same solution from a jsf proyect running on a Tomcat 5.5.20, it fails with this error:
Caused by: java.lang.RuntimeException: Error while creating home.
     at ar.com.mcd.fawkes.ui.locator.EJB3Locator.get(EJB3Locator.java:32)
     at ar.com.mcd.fawkes.ui.locator.ServiceLocator$1.get(ServiceLocator.java:12)
     at net.sf.opentranquera.web.jsf.locator.ServiceLocatorBean.get(ServiceLocatorBean.java:42)
     at com.sun.faces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:79)
     at com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:187)
     at com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:171)
     at com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:263)
     at com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:160)
     ... 80 more
Caused by: javax.naming.NameNotFoundException: Name ejb is not bound in this Context
     at org.apache.naming.NamingContext.lookup(NamingContext.java:769)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:139)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:780)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:139)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:780)
     at org.apache.naming.NamingContext.lookup(NamingContext.java:152)
     at org.apache.naming.SelectorContext.lookup(SelectorContext.java:136)
     at javax.naming.InitialContext.lookup(Unknown Source)
     at ar.com.mcd.fawkes.ui.locator.EJB3Locator.get(EJB3Locator.java:28)
     ... 87 more
Could you please help me with any tip?
Mauricio
Message was edited by:
Mauricio

Hi, Rick
Thanks for your help.
I deleted de application-client.xml file, added the following lines to the web.xml file:
     <ejb-ref>
          <ejb-ref-name>ejb/SessionEJB</ejb-ref-name>
          <ejb-ref-type>Session</ejb-ref-type>
          <remote>ar.com.eds.ejb3.model.SessionEJB</remote>
     </ejb-ref>
and now I´m using oracle.j2ee.rmi.RMIInitialContextFactory
there is no error, and it doesn´t throw any exception but the following line returns null.
SessionEJB sessionEJB = (SessionEJB)context.lookup("java:comp/env/ejb/SessionEJB");
Its seems the lookup method finds the remote ejb because it doesn´t fail, but it returns null.
Any idea what is wrong?
Mauricio.

Error while invoking a Web service deployed on OC4J from Oracle BPEL

Hi,
I had created a web service from a simple java class using JDeveloper and deployed that on OC4J which had emmited a wsdl for the web service. On the same AS my BPEL processing is deployed in which i had created a partner link by using 1st option (i.e Browse WSDL files from local file system) and invoking the published method of the java class.I am expecting that the method of the class which is deployed as web service will be executed and i will get the return of the method as the response of the invoke activity , but i am getting this error :
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary">
<summary>when invoking locally the endpoint 'http://localhost:8080/MyIM-JavaCustomerFactory-context-root/JavaCustFactory', ; nested exception is: ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "JavaCustFactory" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</summary>
</part>
<part name="detail">
<detail>ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "JavaCustFactory" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</detail>
</part>
</remoteFault>
It seems that the Invoke activity is not able to get the WebService and it is asking for some settings , if any clue regarding this pls reply.
I can also give the wsdl also.
mail me at [email protected]

Hi,
Thanx it is working now.
BTW can you give me some urls with info of this kind of setting which i need to do for other kind of integarions in J2EE platform.Sorry if i am asking too much as i am a starter in this technology.

Solaris: OC4J: 9.0.2.0.0 or 9.0.3.0.0

I'm a bit puzzled as to versioning of oc4j running applications created with Jdeveloper RC2 / BI Beans RC2 .
I downloaded a file called oc4j_extended.zip (of 25. March).
I would have thought this to be the latest distro of oc4j.
When I invoke the oc4j.jar, I receive a message like this:
"Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized"
I see other people are running version 9.0.3.0.0, and most Jdeveloper references are for this version as well.
Is there a later version (for Solaris) that I need to download/install?
If so, where can it be found?
Or am I fine running with the one I have?
(Reason for asking is that I am running into problems that could possibly be related to versioning.)
Jens

Thanks for quick response, I am located in Norway, 6 hours in front of the US, so days can easily be "wasted" waiting for you guys. Maybe we'll manage to squeeze in 2 answers today ;-)
Here are the answers to your question:
myhost% java -version -jar oc4j.jar
java version "1.3.1_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
myhost% java -jar oc4j.jar -version
Oracle9iAS (9.0.2.0.0) Containers for J2EE
myhost% java -jar ./oc4j.jar -version
Oracle9iAS (9.0.2.0.0) Containers for J2EE
This is a bit complicated, but here's a quick resume of what I did:
* Install Oracle 9.0.1.0.0, including the http-server.
* Patch to 9.0.1.2.0
* download oc4j_extended, unzip to a new $ORACLE_HOME/oc4j
* Source the following file:
myhost% more java131.sh
setenv PATH /usr/j2se/bin:/u01/app/oracle/product/901/bin:/bin:/usr/bin:/usr/cc
/bin:/etc:/opt/bin:/usr/ucb:.:/usr/openwin/bin:/usr/openwin/lib
setenv CLASS_PATH /usr/j2se/lib:/u01/app/oracle/jre/1.1.8/lib:/u01/app/oracle/p
oduct/901/jlib:/u01/app/oracle/product/901/wmt/jlib
setenv CLASSPATH /usr/j2se/lib:/u01/app/oracle/jre/1.1.8/lib:/u01/app/oracle/pr
duct/901/jlib:/u01/app/oracle/product/901/wmt/jlib
alias java="/usr/j2se/bin/java"
myhost%
* Check that the right java verson is running:
myhost% which java
/usr/j2se/bin/java
myhost%
* start the oc4j server with :
java -Xmx256m -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.COR
BA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -jar oc4j.jar
And it reports back v. 9.0.2.0.0
So what am I doing wrong?
Any input will be appreciated.
Jens

OC4J: marshalling does not recreate the same data structure onthe client

Hi guys,
I am trying to use OC4J as an EJB container and have come across the following problem, which looks like a bug.
I have a value object method that returns an instance of ArrayList with references to other value objects of the same class. The value objects have references to other value objects. When this structure is marshalled across the network, we expect it to be recreated as is but that does not happen and instead objects get duplicated.
Suppose we have 2 value objects: ValueObject1 and ValueObject2. ValueObject1 references ValueObject2 via its private field and the ValueObject2 references ValueObject1. Both value objects are returned by our method in an ArrayList structure. Here is how it will look like (number after @ represents an address in memory):
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@2
Object[1].getValueObject[0] = com.cramer.test.SomeVO@1
We would expect to see the same (except exact addresses) after marshalling. Here is what we get instead:
Object[0] = com.cramer.test.SomeVO@1
Object[0].getValueObject[0] = com.cramer.test.SomeVO@2
Object[1] = com.cramer.test.SomeVO@3
Object[1].getValueObject[0] = com.cramer.test.SomeVO@4
It can be seen that objects get unnecessarily duplicated â“ the instance of the ValueObject1 referenced by the ValueObject2 is not the same now as the instance that is referenced by the ArrayList instance.
This does not only break referential integrity, structure and consistency of the data but dramatically increases the amount of information sent across the network. The problem was discovered when we found that a relatively small but complicated structure that gets serialized into a 142kb file requires about 20Mb of network communication. All this extra info is duplicated object instances.
I have created a small test case to demonstrate the problem and let you reproduce it.
Here is RMITestBean.java:
package com.cramer.test;
import javax.ejb.EJBObject;
import java.util.*;
public interface RMITestBean extends EJBObject
public ArrayList getSomeData(int testSize) throws java.rmi.RemoteException;
public byte[] getSomeDataInBytes(int testSize) throws java.rmi.RemoteException;
Here is RMITestBeanBean.java:
package com.cramer.test;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
import java.util.*;
public class RMITestBeanBean implements SessionBean
private SessionContext context;
SomeVO someVO;
public void ejbCreate()
someVO = new SomeVO(0);
public void ejbActivate()
public void ejbPassivate()
public void ejbRemove()
public void setSessionContext(SessionContext ctx)
this.context = ctx;
public byte[] getSomeDataInBytes(int testSize)
ArrayList someData = getSomeData(testSize);
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println(" serialised output size: "+byteOutputStream.size());
byte[] bytes = byteOutputStream.toByteArray();
objectOutputStream.close();
byteOutputStream.close();
return bytes;
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return null;
public ArrayList getSomeData(int testSize)
// Create array of objects
ArrayList someData = new ArrayList();
for (int i=0; i<testSize; i++)
someData.add(new SomeVO(i));
// Interlink all the objects
for (int i=0; i<someData.size()-1; i++)
for (int j=i+1; j<someData.size(); j++)
((SomeVO)someData.get(i)).addValueObject((SomeVO)someData.get(j));
((SomeVO)someData.get(j)).addValueObject((SomeVO)someData.get(i));
// print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Check the serialised size of the structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
return someData;
Here is RMITestBeanHome:
package com.cramer.test;
import javax.ejb.EJBHome;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
public interface RMITestBeanHome extends EJBHome
RMITestBean create() throws RemoteException, CreateException;
Here is ejb-jar.xml:
<?xml version = '1.0' encoding = 'windows-1252'?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<session>
<description>Session Bean ( Stateful )</description>
<display-name>RMITestBean</display-name>
<ejb-name>RMITestBean</ejb-name>
<home>com.cramer.test.RMITestBeanHome</home>
<remote>com.cramer.test.RMITestBean</remote>
<ejb-class>com.cramer.test.RMITestBeanBean</ejb-class>
<session-type>Stateful</session-type>
<transaction-type>Container</transaction-type>
</session>
</enterprise-beans>
</ejb-jar>
And finally the application that tests the bean:
package com.cramer.test;
import java.util.*;
import javax.rmi.*;
import javax.naming.*;
public class RMITestApplication
final static boolean HARDCODE_SERIALISATION = false;
final static int TEST_SIZE = 2;
public static void main(String[] args)
Hashtable props = new Hashtable();
props.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
props.put(Context.PROVIDER_URL, "ormi://lil8m:23792/alexei");
props.put(Context.SECURITY_PRINCIPAL, "admin");
props.put(Context.SECURITY_CREDENTIALS, "admin");
try {
// Get the JNDI initial context
InitialContext ctx = new InitialContext(props);
NamingEnumeration list = ctx.list("comp/env/ejb");
// Get a reference to the Home Object which we use to create the EJB Object
Object objJNDI = ctx.lookup("comp/env/ejb/RMITestBean");
// Now cast it to an InventoryHome object
RMITestBeanHome testBeanHome = (RMITestBeanHome)PortableRemoteObject.narrow(objJNDI,RMITestBeanHome.class);
// Create the Inventory remote interface
RMITestBean testBean = testBeanHome.create();
ArrayList someData = null;
if (!HARDCODE_SERIALISATION)
// ############################### Alternative 1 ##############################
// ## This relies on marshalling serialisation ##
someData = testBean.getSomeData(TEST_SIZE);
// ############################ End of Alternative 1 ##########################
} else
// ############################### Alternative 2 ##############################
// ## This gets a serialised byte stream and de-serialises it ##
byte[] bytes = testBean.getSomeDataInBytes(TEST_SIZE);
try {
java.io.ByteArrayInputStream byteInputStream = new java.io.ByteArrayInputStream(bytes);
java.io.ObjectInputStream objectInputStream = new java.io.ObjectInputStream(byteInputStream);
someData = (ArrayList)objectInputStream.readObject();
objectInputStream.close();
byteInputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
// ############################ End of Alternative 2 ##########################
// Print out the data structure
System.out.println("Data:");
for (int i = 0; i<someData.size(); i++)
SomeVO tmp = (SomeVO)someData.get(i);
System.out.println("Object["+Integer.toString(i)+"] = "+tmp);
System.out.println("Object["+Integer.toString(i)+"]'s some number = "+tmp.getSomeNumber());
for (int j = 0; j<tmp.getValueObjectCount(); j++)
SomeVO tmp2 = tmp.getValueObject(j);
System.out.println(" getValueObject["+Integer.toString(j)+"] = "+tmp2);
System.out.println(" getValueObject["+Integer.toString(j)+"]'s some number = "+tmp2.getSomeNumber());
// Print out the size of the serialised structure
try {
java.io.ByteArrayOutputStream byteOutputStream = new java.io.ByteArrayOutputStream();
java.io.ObjectOutputStream objectOutputStream = new java.io.ObjectOutputStream(byteOutputStream);
objectOutputStream.writeObject(someData);
objectOutputStream.flush();
System.out.println("Serialised output size: "+byteOutputStream.size());
objectOutputStream.close();
byteOutputStream.close();
} catch (Exception e) {
System.out.println("Serialisation failed: "+e.getMessage());
catch(Exception ex){
ex.printStackTrace(System.out);
The parameters you might be interested in playing with are HARDCODE_SERIALISATION and TEST_SIZE defined at the beginning of RMITestApplication.java. The HARDCODE_SERIALISATION is a flag that specifies whether Java serialisation should be used to pass the data across or we should rely on OC4J marshalling. TEST_SIZE defines the size of the object graph and the ArrayList structure. The bigger this size is the more dramatic effect you get from data duplication.
The test case outputs the structure both on the server and on the client and prints out the size of the serialised structure. That gives us sufficient comparison, as both structure and its size should be the same on the client and on the server.
The test case also demonstrates that the problem is specific to OC4J. The standard Java serialisation does not suffer the same flaw. However using the standard serialisation the way I did in the test case code is generally unacceptable as it breaks the transparency benefit and complicates interfaces.
To run the test case:
1) Modify provider URL parameter value on line 15 of the RMITestApplication.java for your environment.
2) Deploy the bean to the server.
4) Run RMITestApplication on a client PC.
5) Compare the outputs on the server and on the client.
I hope someone can reproduce the problem and give their opinion, and possibly point to the solution if there is one at the moment.
Cheers,
Alexei

Hi,
Eugene, wrong end user recovery. Alexey is referring to client desktop end user recovery which is entirely different.
Alexy - As noted in the previous post:
http://social.technet.microsoft.com/Forums/en-US/bc67c597-4379-4a8d-a5e0-cd4b26c85d91/dpm-2012-still-requires-put-end-users-into-local-admin-groups-for-the-purpose-of-end-user-data?forum=dataprotectionmanager
Each recovery point has users permisions tied to it, so it's not possible to retroacively give the users permissions. Implement the below and going forward all users can restore their own files.
This is a hands off solution to allow all users that use a machine to be able to restore their own files.
1) Make these two cmd files and save them in c:\temp
2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
<addperms.cmd>
Cmd.exe /v /c c:\temp\addreg.cmd
<addreg.cmd>
set users=
echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
REG IMPORT c:\temp\perms.reg
Del c:\temp\perms.reg
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

JBO-25222 while connecting to a OC4J container

Hi,
i create a simple BC4J Project with JDev 9 and tested it locally and it works fine.
After deploying it to OC4J 9.0.2 i create a new Configuration and try to run the Client again, but
now the code
String am = "de.orb.server.orbModule_cm";
String cf = "orbModuleEJB";
appModul = (orbModule)Configuration.createRootApplicationModule(am,cf);
fails with the Exception below.
Can someone give my a hint, whats going wrong? We gave the user all Java Permissions in the database,
but i think the applications fails before.
Thanks in advance
Mirko
Diagnostics: (BC4J Bootstrap) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
[00] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
[01] CommonMessageBundle (language base) being initialized
[02] Stringmanager using default locale: 'null'
[03] BC4J Property jbo.maxpoolcookieage='-1' -->(MetaObjectManager) from System Default
[04] Loading 5.0 IDE classes
[05] Creating a new pool resource
[06] BC4JDeployPlatform: EjbIas
[07] CSMessageBundle (language base) being initialized
[08] JavaVMVersion: 9.0.2.579 cdov
[09] JavaVMVendor: Oracle Corp.
[10] JavaVMName: OJVM Client VM
[11] OperatingSystemName: Windows NT
[12] OperatingSystemVersion: 4.0
[13] OperatingSystemUsername: wolf
[14] Jbo323Compatible Flag: false, str: null
[15] Registered Oracle JDBC driver with BC4J Server
[16] oracle.jbo.JboException: JBO-25222: Unable to create application module.
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(java.util.Hashtable)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule (oracle.jbo.common.ampool.SessionCookie, oracle.jbo.common.ampool.EnvInfoProvider)
     java.lang.Object oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(java.util.Properties)
     java.lang.Object oracle.jbo.pool.ResourcePool.createResource(java.util.Properties)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(oracle.jbo.common.ampool.SessionCookie)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(oracle.jbo.common.ampool.SessionCookie, boolean)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(boolean, long)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(boolean)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule()
     oracle.jbo.ApplicationModule oracle.jbo.client.Configuration.createRootApplicationModule(java.lang.String, java.lang.String, oracle.jbo.common.ampool.EnvInfoProvider)
     oracle.jbo.ApplicationModule oracle.jbo.client.Configuration.createRootApplicationModule(java.lang.String, java.lang.String)
     void de.orb.net.CommunicationLayer.connectToApplicationModule()
     de.pantarhei.datacarrier.DataCarrier de.orb.net.CommunicationLayer.getPanelData(int)
     void de.orb.MainFrame.jbInit()
     void de.orb.MainFrame.<init>(java.lang.String)
     void de.orb.MainApplication.<init>(java.lang.String[])
     void de.orb.MainApplication.main(java.lang.String[])
## Detail 0 ##
javax.naming.NameNotFoundException: de.orb.server.orbModule not found
     java.lang.Object com.evermind.server.rmi.RMIContext.lookup(java.lang.String)
     java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
     void oracle.jbo.client.remote.ejb.ias.AmHomeImpl.remoteLookup()
     void oracle.jbo.client.remote.ejb.ias.AmHomeImpl.initRemoteHome()
     void oracle.jbo.client.remote.ejb.ias.AmHomeImpl.<init>(oracle.jbo.JboContext, java.lang.String)
     oracle.jbo.common.JboHome oracle.jbo.client.remote.ejb.ias.InitialContextImpl.createJboHome(java.lang.String)
     java.lang.Object oracle.jbo.common.JboInitialContext.lookup(java.lang.String)
     java.lang.Object javax.naming.InitialContext.lookup(java.lang.String)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(java.util.Hashtable)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(oracle.jbo.common.ampool.SessionCookie, oracle.jbo.common.ampool.EnvInfoProvider)
     java.lang.Object oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(java.util.Properties)
     java.lang.Object oracle.jbo.pool.ResourcePool.createResource(java.util.Properties)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(oracle.jbo.common.ampool.SessionCookie)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(oracle.jbo.common.ampool.SessionCookie, boolean)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(boolean, long)
oracle.jbo.ApplicationModule oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(boolean)
     oracle.jbo.ApplicationModule oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule()
     oracle.jbo.ApplicationModule oracle.jbo.client.Configuration.createRootApplicationModule(java.lang.String, java.lang.String, oracle.jbo.common.ampool.EnvInfoProvider)
     oracle.jbo.ApplicationModule oracle.jbo.client.Configuration.createRootApplicationModule(java.lang.String, java.lang.String)
     void de.orb.net.CommunicationLayer.connectToApplicationModule()
     de.pantarhei.datacarrier.DataCarrier de.orb.net.CommunicationLayer.getPanelData(int)
     void de.orb.MainFrame.jbInit()
     void de.orb.MainFrame.<init>(java.lang.String)
     void de.orb.MainApplication.<init>(java.lang.String[])
     void de.orb.MainApplication.main(java.lang.String[])
...

Typically this is from a library not being present in your deployment env.
To solve this I copy the entire Jdev tree to the production/test boxes, which include
jdev/j2ee/... the oc4j home stuff.
Have a look in j2ee/home/config/applications.xml for all the libs that are included into
OC4J at run time.
It's easier to just put the whole tree on the deploy box.
But if you must just pick out j2ee/home then grabe ALL the shown jars in application.xml
and drop into j2ee/home/lib
and all should work too.
Good luck,
curt

Error message in opmn OC4J log for my BPEL cluster setup

I am settings up my 2 nodes BPEL cluster in the same subnet, i prepared my jgroups-protocols.xml as:
<config>
<UDP mcast_send_buf_size="32000"
mcast_port="45788"
ucast_recv_buf_size="64000"
mcast_addr="228.8.15.24"
receive_on_all_interfaces="true"
loopback="true"
mcast_recv_buf_size="64000"
max_bundle_size="48000"
max_bundle_timeout="30"
use_incoming_packet_handler="false"
use_outgoing_packet_handler="false"
ucast_send_buf_size="32000"
ip_ttl="32"
enable_bundling="false"/>
<PING timeout="2000"
num_initial_members="3"/>
<MERGE2 max_interval="10000"
min_interval="5000"/>
<FD timeout="2000"
max_tries="3"
shun="true"/>
<VERIFY_SUSPECT timeout="1500"/>
<pbcast.NAKACK max_xmit_size="8192"
use_mcast_xmit="false"
gc_lag="50"
retransmit_timeout="600,1200,2400,4800"/>
<UNICAST timeout="1200,2400,3600"/>
it is same as the default file, the configuration is same in both nodes, however, in OC4J log, i found it return the address is already in use:
zed adaptors for platform 'ias_10g'
Feb 22, 2008 2:58:17 PM org.collaxa.thirdparty.jgroups.protocols.UDP createSockets
INFO: sockets will use interface 0.0.0.0
08/02/22 14:58:17 java.lang.Exception: exception caused by UDP.start(): java.net.SocketException: Address already in use
08/02/22 14:58:17 at org.collaxa.thirdparty.jgroups.stack.Protocol.handleSpecialDownEvent(Protocol.java:600)
08/02/22 14:58:17 at org.collaxa.thirdparty.jgroups.stack.DownHandler.run(Protocol.java:117)
<2008-02-22 14:58:18,453> <INFO> <collaxa> <ServerManager::uninit> Shutting down all domains
<2008-02-22 14:58:18,453> <INFO> <collaxa> <ServerManager::uninit> Done shutting down all domains
<QuartzPublisherInit::init> Notification Retry publisher scheduled at every 15 minute(s)
08/02/22 14:59:18 Oracle Containers for J2EE 10g (10.1.3.3.0) initialized
what is the problem ? how to fix it ?
thanks.

Hi,
Remove "receive_on_all_interfaces" and set bind_to_all_interfaces=false i think.
It might not be exactly what you want to do, but read up on those parameters on the internet on Jgroups.

OC4J Application Server - InstantiationException

Error : java.lang.InstantiationException: Error initializing ejb-modules: message-destination-mapping tag with missing 'location' attribute
HI All,
Hope someone can help me with the following error. I've got a ear file which deploys 100% correct, and the application can run successfully after deploying. But if I stop and start the container, then i get the following exception, the container starts up but the application does not start successfully.
Oracle Container start-up exception:
09/05/11 09:17:15 Start process
Listening for transport dt_socket at address: 8688
0.000: [GC [PSYoungGen: 43776K->4394K(51008K)] 43776K->4394K(517056K), 0.0290830 secs]
3.295: [GC [PSYoungGen: 48170K->7220K(51008K)] 48170K->8371K(517056K), 0.0499300 secs]
6.817: [GC [PSYoungGen: 50996K->7218K(51008K)] 52147K->13636K(517056K), 0.0504670 secs]
09/05/11 09:17:28 WARNING: Application.setConfig Application: stf-7.0.1 is in failed state as initialization failed.
java.lang.InstantiationException: Error initializing ejb-modules: message-destination-mapping tag with missing 'location' attribute
09/05/11 09:17:29 Oracle Containers for J2EE 10g (10.1.3.2.0) initialized
29.062: [GC [PSYoungGen: 50994K->7226K(51008K)] 57412K->15785K(517056K), 0.0436860 secs]
32.675: [GC [PSYoungGen: 51002K->7228K(50880K)] 59561K->16729K(516928K), 0.0346460 secs]
We use jdk1.5, Ejb3 and Oracle 10.1.3
We use message driven beans, for which we create an ejb-jar.xml that looks as follow:
Start
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar version="3.0" xmlns="http://java.sun.com/xml/ns/j2ee"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd">
     
     <display-name>vss-ejb</display-name>
     <enterprise-beans>
          <message-driven>
               <display-name>VSSAdvancedQueueBatchBeanMDB</display-name>
               <ejb-name>VSSAdvancedQueueBatchBean</ejb-name>
               <ejb-class>
                    za.globed.varsite.hebs.bsi.services.ejb.VSSAdvancedQueueBatchBean
               </ejb-class>
               <transaction-type>Bean</transaction-type>
               <message-destination-type>
                    javax.jms.Queue
               </message-destination-type>
               <message-destination-link>
                    jms/batchQueue
               </message-destination-link>
               <activation-config>
                    <activation-config-property>
                         <activation-config-property-name>
                              acknowledgeMode
                         </activation-config-property-name>
                         <activation-config-property-value>
                              Auto-acknowledge
                         </activation-config-property-value>
                    </activation-config-property>
                    <activation-config-property>
                         <activation-config-property-name>
                              destinationType
                         </activation-config-property-name>
                         <activation-config-property-value>
                              javax.jms.Queue
                         </activation-config-property-value>
                    </activation-config-property>
                    <activation-config-property>
                         <activation-config-property-name>
                              subscriptionDurability
                         </activation-config-property-name>
                         <activation-config-property-value>
                              NonDurable
                         </activation-config-property-value>
                    </activation-config-property>
                    <activation-config-property>
                         <activation-config-property-name>
                              messageSelector
                         </activation-config-property-name>
                         <activation-config-property-value>
                              Destination =
                              'za.globed.varsite.hebs.bsi.services.VSSAdvancedQueueBatchBean'
                         </activation-config-property-value>
                    </activation-config-property>
               </activation-config>
          </message-driven>
     </enterprise-beans>
     <assembly-descriptor>
          <container-transaction>
               <method>
                    <ejb-name>VSSAdvancedQueueBatchBean</ejb-name>
                    <method-name>*</method-name>
               </method>
               <trans-attribute>Supports</trans-attribute>
          </container-transaction>
          <message-destination>
               <display-name>
                    Destination for VSSAdvancedQueueBatchBean
               </display-name>
               <message-destination-name>
                    jms/batchQueue
               </message-destination-name>
          </message-destination>
     </assembly-descriptor>
</ejb-jar>
-- end --
Any help or suggestions would be much appreciated.
Thanks
Nina

I would advise you to use the latest version - 10.1.3.5 - i remember some issues with 10.1.3.4.
For certifications see here:
http://www.oracle.com/technetwork/middleware/ias/downloads/oracle-soa-certification-101310-097492.html
You have two options to bypass the check:
* Use ignore : runinstaller -ignoresysprereqs
http://onlineappsdba.com/index.php/2008/11/24/upgrade-oracle-application-server-to-10134-10g-r3-patchset-4/
* Or change in the installers file that lists the allowed versions - you can search for the numbers listed in your error dialog

Logging HTTP and/or SOAP packets in standalong OC4J v10.1.3.2

I'm running OC4J standalone v10.1.3.2 on RH5 linux. I'd like to know how to turn on logging so that all incoming HTTP data can be viewed.
I've basically got a Web Service which is failing to execute from some clients (but not all) due to a SOAP11 version mismatch problem. If I could see the incoming HTTP and/or SOAP request then I could determine where the inconsistency is coming from.
Here's an extract of the returned SOAP error:
<faultcode>env:VersionMismatch</faultcode>
<faultstring>Version Mismatch</faultstring>
<faultactor>http://schemas.xmlsoap.org/soap/actor/next</faultactor>
I've tried editing j2ee-logging.xml and set the logging level to FINEST and TRACE but it's still not logging out the HTTP traffic.
Any ideas welcomed,
Thanks

Andy,
Which log files are you looking at? There is a server.log that will be impacted when you set the logging level to FINEST. Since you want to look at http requests, have you considered using Fiddler on the client side? It's pretty verbose but you can see all sorts of info including data posted to forms.
-Michael
PS
URL:
http://www.oracle.com/technology/tech/java/oc4j/htdocs/oc4j-logging-debugging-technote.htmlTake a look at the "Debug Options in OC4J" section. There are several HTTP debugging options listed.
Edited by: Michael F. Hardy on Dec 17, 2008 9:40 AM

How to deploy an ADF RC application to any OC4J that running on Linux?

I developed an application with the latest Jdev 11gTP3. The team has a linux server that I want to install an OC4J and deploy my application.
I tried the following:
1. OC4J standalone 11g. Followed the installation instruction, with the command:
$ORACLE_HOME/bin/oc4j -start
I can initiate a server connection from Jdev, even passed test. But when deployment failed, I even tried to install ADF runtime library by following an Oracle official document. However, I can't get it work.
2. I tried to start the Jdev embedded OC4J with command:
java -jar oc4j.jar
I believe something has to be set before the application can work on this OC4J
Has anyone ever made it? Can you please share the steps of accomplishing it?
Many thanks in advance.

Thanks Frank for your reply
This can not be done with TP1 OC4J even with proper configuration and amendment?
How about WebSphere and Weblogic servers?
So at this stage, a TP3 ADF application could only run on JDev Embedded OC4J?
Regards,
William

How to deploy an application in OC4J standalone?

I'm trying to deploy Jspell 2004 in a standalone OC4J 10g. All my attempts have failed thus far, as I admit, I don't really know what I am doing.
I've found several articles, including those from Jspell, and they all start with 'deploy the war file' but how?
I don't know where I should deploy the WAR file or exaclty which config files I need to modify. I've tried under OH/j2ee/home/applications, OH/j2ee/DevSuite/application-deployments and always get the 'Error instantiating web-application' no application found on server.'
I'm using the OC4J strictly for forms/reports running on port 8889 and that all works fine. When I start the OC4J, it is referencing the server.xml file in the DevSuite/config folder.
Any ideas?

Please look at the OC4J FAQ
http://www.oracle.com/technology/tech/java/oc4j/904/collateral/oc4j-faq-904.html#oc4j_deploy
Yes. If you wish to deploy only a Web module then you can utilize the default application OC4J is configured with. This is a two step task:
First, tell the container about the WAR file to be deployed. Open the <J2EE_HOME>/config/application.xml file in an editor. Add a new <web-module> tag and specify the attributes for your WAR file.
<web-module id="HRWebModule" path="<PATH-TO-WAR-FILE>"/>
Secondly, tell the OC4J HTTP server about the new WAR file and provide a URL to access it. Open the <J2EE_HOME>/config/http-web-site.xml file in an editor. Add a new <web-app> tag and specify the attributes for your new Web module. It's important to note that the application attribute must specified as "default" since you have deployed your Web module to the default application. The name attribute should match the ID attribute you specified for the Web module.
<web-app application="default" name="HRWebModule" root="/hrweb" />
The WAR file will now be deployed by OC4J and accessible using a URL of /hrweb.
-Debu
http://debupanda.com

How to Migrate OC4J EJB Web service to Weblogic

Hello,
We have a J2EE app developed under OC4J that needs to be migrated to weblogic 10.x. It uses web services mapped to EJB's with the oracle.j2ee.ws.SessionBeanWebService class, example setup:
<servlet>
<servlet-name>CreditCardManager</servlet-name>
<servlet-class>oracle.j2ee.ws.SessionBeanWebService</servlet-class>
<init-param>
<param-name>jndi-name</param-name>
<param-value>CreditCardManagerBean</param-value>
</init-param>
</servlet>
Can someone point me to any docs on how to create the equivalent objects in Weblogic?
Thanks,
Leor

Microsoft webservices uses HTTP sessions to maintain state. That means that the webservice sends a token to the client to be passed back on subsequent calls.
Unfortunately, the webservice control in 8.1 doesn't know how to send the session token back to the MS webservice. The webservice control knows how to talk SOAP only. It doesn't know about session tokens. The reason for this is the different protocols available to transmit SOAP. Most of them are not HTTP session aware.
Workshop webservices uses conversation ID's that are contained within the SOAP header to maintain state. That way, we don't have the dependency on the session state for maintaining state.
The way to handle Microsoft's stateful webservice implementation is to create a custom webservice control that uses an HTTP client. Query the HTTP client for the session cookie. Store the session token and send it with subsequent calls to the MS webservice.
Thanks,
David Gorton
Workshop Customer Centric Engineering

OC4J 9.0.4.1.0

Similar Messages

Maybe you are looking for