OC4J instance restarts automatically after 10 seconds.

Hello Friends,IT System Administrators,
I am using Oracle Application Server 10.1.2 on IBM AIX 5.3 Platform. Since many days, my "OC4J" service restarts automatically in 10 seconds. By counting error logs in /ORACLE_HOME/opmn/logs/ipm.log,i have found below errors.
10/01/01 15:05:20 [4] Process Crashed: OC4J~WEBVAT~default_island~1 (864289932:626744) - Restarting
10/01/01 15:05:22 [4] Starting Process: OC4J~WEBVAT~default_island~1 (864289933:0)
10/01/01 15:05:29 [4] Process Alive: OC4J~WEBVAT~default_island~1 (864289933:729570)
10/01/01 15:28:29 [3] [libopmnoc4j] Could not connect to socket while pinging an OC4J process
10/01/01 15:28:29 [4] [libopmnoc4j] Process Ping Failed: OC4J~WEBVAT~default_island~1 (864289933:729570)
10/01/01 15:28:29 [4] Job 0 9969720 result:
ias_admin.gjvatwb1~OC4J~WEBVAT~default_island~864289933:729570
Status: Alive
Operation: internal (Connection refused)
ErrFile: /oracle/ora10gas/opmn/logs/OC4J~WEBPROBE~default_island~1
Kindly help me out to sort out this issue.
Nishith Vyas

Hi,
To see the log files,
You can create an iView based on the below par file
com.sap.portal.runtime.admin.logviewer.
Use the component default in the PAR File.
Preview this iview to see the console for logs.
And regarding your error,Please check if the there is free space in the Hard Drive of USR folder
Also recheck the JVM settings according to Note 723909 - Java VM settings for J2EE 6.40/7.0.
Based on the 32 bit or 64 bit OS,the parameter values differ
Following are the Parameters for 64 bit OS.
-XX:MaxPermSize=512M
-XX:PermSize=512M
-Xmx2048M
-Xms2048M
-XX:NewSize=320M
-XX:MaxNewSize=320M
Hope it helps.
Cheers,
Santhosh

Similar Messages

SSRS 2008 R2 Services not restarting automatically after reboot

SSRS 2008 R2 Reporting instance not restarting automatically after patches install. Is there a way to resolve the issue
Windows 2008 R2 Server
16 GB RAM

Hi,
Follow this article to resolve the issue:
Reporting Services service doesn't start after the installation of MS12-070 security patch
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Workaround 1:
Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
1. Click Start, click Run, type regedit,and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
a.On the Edit menu, point to New, and then click DWORD Value.
b.Type ServicesPipeTimeout, and then press ENTER.
c.Right-click ServicesPipeTimeout, and then click Modify.
d.Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before
Restart the computer for the changes to take effect. Check that SSRS services can be started now.
You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
http://support.microsoft.com/kb/2745448/en-us
Thanks.
Tracy Cai
TechNet Community Support

Server0 node restarts automatically after 10 minutes...

Hello Portal ppl..
I have encountered a troublesome porblem at My portal server.
Server0 node restarts automatically after 10 minutes...showing yellow status..
Following is developer trace of server0 node:
[Thr 373752] Tue Dec 30 12:52:01 2008
[Thr 373752] JLaunchISetClusterId: set cluster id 12403050
[Thr 373752] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 373752] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 377684] Tue Dec 30 12:53:00 2008
[Thr 377684] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
Following is developer trace of jcontrol.exe node:
[Thr 379212] Tue Dec 30 12:51:37 2008
[Thr 379212] JControlICheckProcessList: process SDM started (PID:379984)
[Thr 379212] Tue Dec 30 12:51:57 2008
[Thr 379212] JControlICheckProcessList: process server0 (pid:380868) died (RUN-FLAG)
[Thr 379212] JControlIResetProcess: reset process server0
[Thr 379212] JControlICheckProcessList: running flight recorder:
C:\j2sdk1.4.2_12\bin\java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID12403050 1230620106 -bz D:\usr\sap\E70\SYS\global
JControlStartJLaunch: program = D:\usr\sap\E70\JC01\exe\jlaunch.exe
-> arg[00] = D:\usr\sap\E70\JC01\exe\jlaunch.exe
-> arg[01] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
-> arg[02] = -DSAPINFO=E70_01_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=D:\usr\sap\E70\JC01\j2ee\cluster\instance.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_359972
-> arg[06] = -nodeName=ID12403050
-> arg[07] = -jvmOutFile=D:\usr\sap\E70\JC01\work\jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=D:\usr\sap\E70\JC01\work\std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=D:\usr\sap\E70\JC01\work\dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = -debugMode=yes
-> arg[15] = pf=D:\usr\sap\E70\SYS\profile\E70_JC01_infpu05445
-> lib path = PATH=C:\j2sdk1.4.2_12\jre\bin\server;C:\j2sdk1.4.2_12\jre\bin;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_12\bin;D:\usr\sap\E70\JC01\j2ee\os_libs;D:\oracle\E70\102\bin;C:\Program Files\CA\SC\CAWIN\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;D:\usr\sap\E70\SYS\exe\uc\NTI386
[Thr 379212] JControlICheckProcessList: process server0 started (PID:358680)
Please Help.....

Hi,
To see the log files,
You can create an iView based on the below par file
com.sap.portal.runtime.admin.logviewer.
Use the component default in the PAR File.
Preview this iview to see the console for logs.
And regarding your error,Please check if the there is free space in the Hard Drive of USR folder
Also recheck the JVM settings according to Note 723909 - Java VM settings for J2EE 6.40/7.0.
Based on the 32 bit or 64 bit OS,the parameter values differ
Following are the Parameters for 64 bit OS.
-XX:MaxPermSize=512M
-XX:PermSize=512M
-Xmx2048M
-Xms2048M
-XX:NewSize=320M
-XX:MaxNewSize=320M
Hope it helps.
Cheers,
Santhosh

My canon 600D stops recording videos automatically after 8 seconds.

my canon 600D stops recording videos automatically after 8 seconds. i can't find anything of that sort in the settings menu.
what settings should be used??

my canon 600D stops recording videos automatically after 8 seconds. i can't find anything of that sort in the settings menu.
what settings should be used??

Motorola DROID X Restarts Automatically After I Shutdown

My Motorola DROID X Now Restarts Automatically After I Shut It Down (50% of the time?). It worked great at first.
I have used soft & hard resets & this problem persists.
Is there a software fix for this?

Thank you Vanessa for acknowledging the problem and for Verizon working on a solution!
Mike
VanessaC_VZW wrote:
Good morning and thanks for all the feedback!
This issue has been lifted up, as there have been other reports of the Droid X powering up on its own after being turned off. Our product team is working to resolve this; however, there is no date on a software resolution yet. Once a software update becomes available, it will be pushed through your phone.
We appreciate your patience.
Thank you,

My iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

my iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

I am having the same issues--just got off phone with customer service rep--was told that my phone is in recoveyr mode and that I would have to restore it, however, the only things that would be restored would be from my last backup which was in November 2013! I was also told that apple users should not update as soon as the update is available (so why are they sending it to us if they're not sure that there will be any problems!!!). I can't restore now since I am in work--will do it when I go home tonight. In the meantime, I am without a working iphone for the day! This is horrible--I see I'm not the only one who has experienced this!

How to get Mavericks server that is connected to a UPS to restart automatically after a power outage.

This is driving me crazy. Is there anyone running Mavericks as a mission critical server on Backup Power Supplies that has a way to get the servers to restart automatically after a power outage. The UPS vendors all have software for Windows, but not Macs, and the setting in System Preferences, doesn't work with the UPS's Iv'e tried (2 different APC models (Smart and Back-UPs), one Triplite (Smart) and one CyberPower, (all claiming to be Mac compatible))

APC do apparently still do a command-line daemon (PowerChute Network Shutdown) which monitors over the network the UPS and will cleanly shutdown the Mac. For lower-end UPS devices these are typically connected via a USB cable and the built-in Apple System Preferences let you control the options - if it is a model supported. There is however a big limitation of using a USB connection which is that you can only connect a single computer to a UPS via USB and of course most companies have multiple servers.
It maybe that what is happening even if you use APC's software is the following -
Power failure detected by UPS
Signal sent to Mac
Computer does a clean shutdown
Power restored
UPS has no way to tell Mac because it is shutdown and Mac does not support 'Wake on LAN' if fully shutdown
The Mac does have an option to 'Startup automatically after a power failure'. However this might only take place if the Mac is not cleanly shutdown, it could be that if the Mac is cleanly shutdown it does not count this as a power failure. If this is correct then there is nothing that can be done as users to resolve this, the only way it could be resolved would be if Apple provided a way for a tool like APCs software to both do a clean shutdown and set a flag as this being due to a power failure so that when the Mac does detect the power being restored it triggers the Mac in to booting.
In the dim and distant past when Macs used ADB to connect keyboards and mice the ADB interface did support an external power-on signal. This does not exist for USB.
Personally I have regarded the APC software (PowerChute Network Shutdown 3.0.1) to be so badly supported and so old as to be too risky to use. It lists 10.7 and 10.8 but not 10.9 and uses Java 1.6 which itself is unsupported. There is a third-party tool you might want to look at called NUT (Network Ups Tools) see http://www.networkupstools.org
NUT is free and lets you do clever things like -
Connect a single computer via serial or USB to the UPS
Act as a 'server' over the network to other computers sharing the UPS
When power failure is detected the NUT 'server' sends a signal to the NUT 'clients' so all of them know that there is a power failure and can do their own clean shutdowns
This gets round only being able to connect a single computer via USB.

Phone hangs and restarts automatically after sim c...

phone hangs and restarts automatically after sim change in my lumia 520.
why is it happening? Can anyone help?

Teh SIM you put in was that anew or a used SIM? if not new get it replaced for one.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

I am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

i am having iphone 5. my phoen restarts automatically after i switch it off while not on charging. but when it is charging it works normally. battery also discharge in 1 hour.

basically i bought this phone from canada & using it in india. i tried to contact apple support in india, they told that the warranty is valid in the country where you purchsed this phone. very ammazing. Apple is a very big brand name & they are not serving their costumers in other country. any suggestions?

OC4J instance restart when launch the URL

Hi,
We are using oracle 10g AS and 10G db for our environment. I managed to configure and bring up the OC4J instance (based on vendor doc) but when I try to connect to the system. the OC4J instance automatically get restarted (it is connecting to http://t1fpmsmyap:7778/ls/mainMenu.do). Here is the log file gathered from opmn/logs directory.
05/10/01 12:58:35 Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)
initialized
05/10/01 13:19:50 /z01/appl/oracle/as10gj/9.0.4/j2ee/t1fpmsmyap/applications/ls_
app/ls_web/WEB-INF/classes
When i connect the sysem, the entry below display in the log file and after a while the OC4J instance get rebooted. The /z01/appl/oracle/as10gj/9.0.4/j2ee/t1fpmsmyap/applications/ls_
app/ls_web/WEB-INF/classes directory is where all the applications code store.
05/10/01 13:19:50 /z01/appl/oracle/as10gj/9.0.4/j2ee/t1fpmsmyap/applications/ls_
app/ls_web/WEB-INF/classes
05/10/01 13:23:29 Stop process
05/10/01 13:25:01 OrionCMTConnection not closed, check your code!
05/10/01 13:25:01 Logical connection not closed, check your code!
05/10/01 13:25:01 (Use -Djdbc.connection.debug=true to find out where the leaked
connection was created)
05/10/01 13:25:14 Shutting down...
05/10/01 13:25:15 Start to clear system configuration
05/10/01 13:25:15 Start to clear the cache
05/10/01 13:25:15 Clear the cache succes
I am very new to oracle apps server and java. Appreciate for any help.
JAVA OPTION setting is
-server -Xms512m -Xmx512m -XX:PermSize=256m -XX:MaxPermSize=256m -XX:NewSize=256m -XX:MaxNewSize=256m -Djava.security.policy=/z01/appl/oracle/as10gj/9.0.4/j2ee/t1fpmsmyap/config/java2.policy -Dconfig.file.path=/z01/appl/oracle/as10gj/9.0.4/j2ee/t1fpmsmyap/app_config/ -Dconfig.appserver.path=/z01/appl/oracle/as10gj/9.0.4/j2ee/t1fpmsmyap/ -Dconfig.appserver.instance.name=t1fpmsmyap -Ddedicated.rmicontext=true -Djava.awt.headless=true -Djava.library.path=/opt/mqm/java/lib/
HIBERNATE_HBM_PATH:/z01/appl/oracle/as10gj/9.0.4/j2ee/t1fpmsmy
ap/applications/ls_app/ls_web/WEB-INF/classes
Thanks
Regards,
Goh

Hi,
same problem, no clue....
I have IAS 10g 10.1.2.
My Box is a Pentium Xeon 700 MHZ 2GB RAM; also installed Oracle 9.2.0.4 .
Thanks for any help.

Satellite Pro L40 PSL4BE restarts automatically after shutdown

Hi,
I have an issue where my laptop starts up automatically after seemingly going into hibernation and shutting down by closing the lid. (I have it configured so it goes into hibernation when i close the lid.)
The strange thing is that this only happens when it's hooked up to the power supply. If i close the lid when it's on battery power it goes into hibernation and remains shut down as it should.
This all started when i changed my power scheme from "Balanced" to "Performance". Setting it back to "Balanced" did not help, nor did setting it to the lowest setting. Also, it used to come back out of hibernation automatically after i opened the lid, this no longer happens either.
I am unsure of whether this is a software or hardware issue.
Over the weekend i've reinstalled the laptop using the supplied recovery discs and applied all updates and patches for Vista but the problem remains, so now i am leaning more towards it being a hardware issue even though i have no idea what kind of hardware malfunction could be causing this.
Does anyone have an idea of what could be causing this behavior?

Hello,
Thanks for the replies. I'm afraid i haven't found any solution yet.
Over the weekend I installed Ubuntu on this laptop and tried to hibernate but it demonstrated the exact same behaviour as under Vista. it shuts down and like 10 seconds after it boots back up. this leads me to believe that the problem is hardware related in some way. it would surprise me that both vista and a linux distro would have the exact same issues. So now i'm back on the Vista i restored using the restore discs.
I haven't tried installing a windows xp yet though i suspect i'll have the same issues.
@Sasha
The thing is that the problem isn't in windows hibernating or not shutting down when the lid closes. It does that part just fine. What it shouldn't do however is restarting by itself whithout my intervention several seconds after it shut down. no matter the setting, that can't be normal behaviour.
@borge & Jonnie
Have any of you already had contact with the toshiba helpdesk on this issue? if so, what did they say? i haven't had the time to call them yet.
I'll update as i find out more.

Notify when managed server restarts automatically after a crash.

I am trying to see if there is some way I can be notified (by email) when a managed server a cluster restarts automatically. I am running Weblogic 9.2 on Solaris Sparc 5.10.
I can certainly compare the PIDs of the last and the new JVM but am looking for a slick way to do it especially at the Node Manager level.
Thanks.

Hi,
*The server was started in warning mode and the JTA was declared unhealthy. I saw 2 transaction alive for more than 2000 seconds which is uncommon.
*The resource adaptor was started properly.
*We are using file store. But will it make a difference?
Thanks!

Some Systems Restarted Automatically after Updates Deployment with Restart Suppressed

I've searched the forum and multiple blogs - but, I'm still confused about what is causing some of our workstations to restart after applying a software updates deployment.
I deployed the Dec 2013 Patch Tuesday updates to a collection of workstations. The deployment was set to:
Not allow restarts outside of a maintenance window (box is unchecked)
Suppress restarts on workstations (box is checked).
There is no maintenance window defined for any of our workstations
On all the workstations, the HKEY_LOCAL_MACHINE\Software\...\WindowsUpdate\ values are:
WUServer: http address of our SCCM SUP server
WUStatusServer: http address of our SCCM SUP server
Also, the key in HKEY_LOCAL_MACHINE\...\WindowsUPDATE\AU is:
UseWUServer: 1 (which I understand disables the use of the automatic Windows update service)
Some set of workstations automatically restarted shortly after 3:00 am the next morning. Clearly that's the Windows Update Agent jumping in a restarting the systems. However, I don't understand why it would do that. I really don't understand why it would
have occurred on only some of the workstations while others are still waiting for users to manually restart 36 hours later.
All of the workstations are in the same active directory OU - so the same set of GPOs applies to all.
Note: none of the registry keys were set directly in any GPOs - I assume the values were set by the SCCM client.
Any assistance would be appreciated.
Larry

depending on the OS version, this could be relevant:
http://blogs.technet.com/b/wsus/archive/2013/06/11/wsus-blog-managing-updates-with-deadlines-in-an-era-of-automatic-maintenance.aspx
http://blogs.technet.com/b/wsus/archive/2013/10/08/enabling-a-more-predictable-windows-update-experience-for-windows-8-and-windows-server-2012-kb-2885694.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Secure server instance restarts automatically

Hi All,
I am using iPlanet Web Server 6.0 SP1 with weblogic app server ( no LDAP ) to host a website on Windows 2000 machine. I have two virtual server instances of iPlanet. The one that is configured for SSL, gets restarted automatically. I get following error in event log of system or error log of that instance.
ncorrect Parameter security ( 3780): for host 202.68.143.70 trying to HEAD /index.html, acl-state reports: access of D:/iPlanet/Servers/docs/web/index.html denied by ACL path=d:/iplanet/servers/docs/web/ directive 1
The ACL entries are OK.
Could anybody please help me out?

The error message states that the server denied access to a client who was trying to access D:/iPlanet/Servers/docs/web/index.html. It denied access as it was instructed to by the first access control directive configured on the path d:/iplanet/servers/docs/web/. If you don't want to deny access to D:/iPlanet/Servers/docs/web/index.html, you should review your ACL file configuration.
The Service Pack Release Notes document the issues addressed by that Service Pack. You can view the Release Notes on docs.sun.com at http://docs.sun.com/db/prod/s1websrv#hic

Nokia 5800 restarting automatically after firmware...

recently i had updated my firmware through phone itself,after that its getting restarted automatically once or twice in a day. Since the problem persists i reinstalled the s/w through system also.but the problem is still there ,can anybody help me

hi, I had same problem when I upgraded my damned 5800 to version 50. At first after the upgrade, it was reseting once in 2-3 minutes. I decided to format sd card and after that reseting times reduced to twice a day espicially after sending sms. Changing the microsdhc card with an old one with 1 GB capacity, compeletely solved the problem. Yesterday I bought a brand new micro sdhc : Verbatim 8GB class 4; but its the problem : its not working well. its slow and while connecting to pc it causes some fault. but the restarting problem is solved. Please recommand me a good microsdhc card.

OC4J instance restarts automatically after 10 seconds.

Similar Messages

Maybe you are looking for