OC4J Licence for spatial production server

Hello all,
I have one confusion.
We are ISV partner of oracle.
We have on big customer he wants -
1. 10g Enterprise Edition
2. Spatial
3. OC4J
What License should I give for OC4J. Does it comes for production server?
Or I have to give him application server.
Please help. Thanks in advance.
Pankaj

In general, you would need to license the standby database separately.
You'll want to see the Software Investment Guide for more details. You may be able to avoid licensing the standby database if you are using OS clustering to provide the failover and the standby database isn't activated more than 10 days a year.
Justin

Similar Messages

  • FrameMaker 9: Licencing for this product has expired

    A few weeks ago, I installed a licenced copy of Technical Communication Suite v2, but did not really get the chance to try it out properly at the time.
    Upon launching it yesterday, instead of the application launching, I just got a dialog box:
    "Licencing for this product has expired"
    Does anybody know how I can rectify this?
    Thanks,
    Jon

    Jon/Mike,
    If you had any of the beta versions installed, then this will mess
    with subsequent new installs if you didn't deactivate and remove the
    serial number before it expired. To kick start it back to live with
    the appropriate new serial number you can try these steps. Note: you
    don't necessarily need to uninstall and re-install the suite.
    1. Roll back your system clock to a point when the beta/prior version
    was working.
    2. Open up either FM/Robo/Captivate and select the "Deactivate..."
    under the Help menu.
    3. You will be prompted if you're sure and want to deactivate the
    whole TCS, etc. One important option here is that you can remove the
    serial number upon deactivation. You need to do this!
    4. Once deactivated and the serial number is removed, reset your
    system date back to normal.
    5. Finally start up any of the three main apps and you'll be prompted
    with the EULA that you have to agree to and then will be asked to
    enter the proper serial number.
    I hope this helps in your situation.
    Been there, done that... ;-)

  • Need help in writinf a stop script for a production server

    can somebody help me with a stop script which stops a jrun
    production server.
    jrun -stop production
    this command should work but how do i use this in a script .
    Thanks

    Hi,
    I highly recommend that you skip VBScript and learn PowerShell instead. This is pretty trivial in PowerShell:
    If ($env:COMPUTERNAME.Length -le 15) {
    # Do stuff
    # HINT: Look into Start-Service
    Write-Host "Under limit: $env:COMPUTERNAME"
    } Else {
    # Do optional stuff
    Write-Host "Over limit: $env:COMPUTERNAME"
    (OT: jrv - happy? =])
    If you must stick with VBScript for some odd reason, here's an example to get you started:
    Set wshNetwork = WScript.CreateObject( "WScript.Network" )
    strComputerName = wshNetwork.ComputerName
    If Len(strComputerName) <= 15 Then
    'Do stuff here when the name is short enough
    WScript.Echo "Under limit: " & strComputerName
    Else
    'Do stuff here when the name is too long (only if you want to)
    WScript.Echo "Over limit: " & strComputerName
    End If
    http://www.activexperts.com/activmonitor/windowsmanagement/adminscripts/services/
    Don't retire TechNet! -
    (Don't give up yet - 12,830+ strong and growing)

  • Necessity of licences for the backup server

    hi, can some one give me the argument to convince a customer to purchase licenses for his backup server?

    user8137668 wrote:
    hi, can some one give me the argument to convince a customer to purchase licenses for his backup server?Perhaps http://www.oracle.com/corporate/pricing/databaselicensing.pdf (found at http://www.oracle.com/us/corporate/pricing/index.htm)

  • Acrobat Pro 9 "Licencing for this product has stopped working."

    I have uninstalled the program and reinstalled, that did not work. I also downloaded the license repair tool and followed those steps (extract, run, reboot, run, reboot, press 0) and I still get this message when I try to open acrobat pro. I have my disk (including serial number) but since having this issue I have not been asked to input that serial number anywhere.
    The full error message is "You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help. (148:3)" Phone support says there is no phone support and any online stuff redirects me here.

    Hi AdobeNewb,
    This link seems relevant to your query : Error "Licensing has stopped working" | Windows
    Please refer the webpage associated with this link and follow the on-screen instructions.
    Let me know if you face any challenges.
    Regards,
    Rahul

  • Adobe Premiere Pro showing "licence for this product has stopped working"

    I have tried everything in the forum but nothing helps.
    please help me
    Only Adobe Premere Pro is showing this problem while rest all the things are working fine.
    not is it showing any error number.

    Try this:
    http://kb2.adobe.com/cps/405/kb405970.html
    I know it says "CS4", but it's worth a try for CS3.
    -Jeff

  • Licencing for this product stopped working

    Up graded to Mac  OS X 10.9.2 (13C1021). Programs went away... can go back if that makes things work again. Is there a way to use PS Elements 09?

    My computer was up dated and crashed... so Apple care fixed it and did something that they needed to wipe , my had drive clean. I bought Elements 09, and had Snow Leopard, that went to Lion, to Mt Lion and now Maverick... which has not worked well, and after a Maverick's latest up date... my Photoshop Elements was gone! It's on my Time Machine, but Maverick is not talking to my old back ups... Apple will give me a new Motherboard and put my computer back to how it was if I had time to bring it in. So once you up grade, and in my case it was a down grade because nothing works after the OS was installed, the chips are burned and can not go back to how they were... not sure if this is all that you wanted but this is what happened.
    I have a icon, and the error message says I need to contact Adobe, and  the forms say to follow some steps that I can not find on my computer... I just wasted to fix the CD case for the new Blues CD we recorded and print CD covers! All not going to happen with a program that will not launch due to my no longer having a recognizable registration!
    So, I was looking for the who to call, not chat on line and have a conversation with how I download a copy or unlock the one I paid for in full in 2009.
    If you can help me I'm in your debt... want a great Blues CD of the Pacific Coast Blues Band live from the SB Drum Lab? Yours if I can print the cover!

  • Hardware specs for production server

    Could anyone with operational experience provide some feedback on optimal
    configurations for a production box running Weblogic App Server 5.1 ?
    thanks,
    raj

    There is a capacity guide, please contact BEA sales to get a copy.
    Cheers - Wei
    Raj Rajagopalan <[email protected]> wrote in message
    news:[email protected]..
    Yes I looked at this link but don't see the type of information I'mlooking
    for.
    My best guess for an optimal hardware platform at this point is the
    following:
    Intel box with 256 mb RAM, 10 GB disk with a 800 MHz processor.
    Would appreciate any feedback on whether I'm over or under the target fora
    production box running WLS.
    thanks,
    raj
    Wei Guan <[email protected]> wrote in message
    news:[email protected]..
    http://www.weblogic.com/docs51/admindocs/tuning.html
    Cheers - Wei
    Raj Rajagopalan <[email protected]> wrote in message
    news:39bd4d99$[email protected]..
    Could you give me a link ?
    I see minimum reqts but what I'm looking for is an optimal
    configuration
    for
    a production server. Clearly a maximal config with more of everythingwould
    work but I'm hoping to have an intelligent idea of where the 90/10
    rule
    would apply.
    thanks for your help,
    raj
    Michael Girdley <[email protected]> wrote in message
    news:39b70b95$[email protected]..
    I suggest checking out the tuning guide located in our
    documentation.
    >>>>
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "rr" <[email protected]> wrote in message
    news:39b6a57b$[email protected]..
    btw this will be running whatever is the latest version of
    Solaris.
    >>>>>
    thanks
    rr <[email protected]> wrote in message
    news:[email protected]..
    Could anyone with operational experience provide some feedback
    on
    optimal
    configurations for a production box running Weblogic App Server
    5.1
    thanks,
    raj

  • Cold Standby Server for Crystal Reports Server...

    Hi there,
    We have the confirmation from Hong Kong SAP that Crystal Reports Server 2008 does not come with any clustering feature as Business Objects Enterprise does. We are to set up a cold standby server for the production server for high availability. Below is our procedures to work it out:
    1) we set up two machines for CRS 2008 with the same licence key and identical hardware; otherwise we clone the production machine to an identical hardware for a cold standby machine
    2) we are using our Oracle instance (same instance for both the production and the standby one) for CRS 2008 repository; we bring the production sever offline and perform the standby server installation of CRS 2008 without resetting the repository Oracle database
    3) we are to use a SAN LUN for storing the reports produced by CRS 2008
    Once the production server does not work properly due to any hardware problem, we switch it off manually and turn on the standby machine and the Crystal Reports service should resume with no repository problem (all the settings) and no loss of printed reports. We would be grateful if you could confirm the feasibility of these procedures. Thanks a lot.
    Regards,
    Jason FU

    Correct, CRS is for a single machine use only, that why it is not as expensive as the full BOE. Talk to Sales to upgrade.

  • Migrating PS from test to production server

    Hi,
    I'm going on a evaluation test for PS. It's installed and configured on a temporary server (the test server) and working fine. The next step is to have this working on the "real" environment, it means in the production server.
    What will happen with the documents I've already applied a policy? Can i use this documents with the new installation? Will the documents be managed with the new server?
    Thanks, regards.

    Given this, I think I would be inclined to set up a virtual server or
    DNS alias for the production server, like
    adobepolicyserver.mycompany.com.
    That way, you can freely move the policy server function around by
    moving the software and changing the alias. If you simply use a name
    assigned to the server for another purpose, you could hit the
    situation where someone else decides that name has to change for
    administrative reasons, or where e.g. there come to be two production
    servers and someone decides Policy Server needs to move to the second
    one to balance the load.
    Aandi Inston

  • Request in Production server for Master data

    Hi,
    In Production server when we try to hire an employee through PA40, it is giving an error saying that "Client XXX has status 'not modifiable", Choose 'Display object' or 'Cancel'.
    I think it is asking for a request, because of settings in SCC4,is not modifiable. Since it is PRD server the standard SAP suggests to have the setting as above hence we cant change the settings also.
    What could be the solution for this?
    Regards
    Prasad

    Hi Prasad,
    It doesnt make any differnce, just click on display object , it will save th data in the respective tables.....
    Regards,
    Sushil Soni

  • TIME_OUT runtime error for Zreport in only Production server.

    Hi Experts,
                     I have created one new Zreport which is working well in Development & Quality Server for given input. but same report is giving run time error  in Production server for same input resulting into error TIME_OUT.  Short text of error is  Time limit exceeded.
                    Please provide me solution for the same.
                    Thanks in advance.
    Best Regards,
    Vinayak

    Moderator message - Please see Please Read before Posting in the Performance and Tuning Forum before posting - post locked

  • Time out error in production server  for alv grid report

    hi. i have developed alv grid report using nested select statments. when i testing in development  server it is giving the output but in production server if i give 4 months then it is showing time out error.please help me out..its urgent.
    Thanks in advance.

    Hi Manu,
    Don't use Nested selected statements.
    Use the Following  Performance Tuning Options that i have given below so that your problem can be solved.
    1)  Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
    2) Avoid for all entries in JOINS
    3) Try to avoid joins and use FOR ALL ENTRIES.
    4)   Try to restrict the joins to 1 level only ie only for tables
    5)   Avoid using Select *.
    6)   Avoid having multiple Selects from the same table in the same object.
    7)  Try to minimize the number of variables to save memory.  
    8)   The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
    9)   Avoid creation of  index as far as possible
    10) Avoid operators like  <>, > , < & like % in where clause conditions
    11) Avoid select/select single statements in loops.
    12) Try to use 'binary search' in READ internal table. Ensure table is sorted before using   BINARY SEARCH.
    13) Avoid using aggregate functions  (SUM, MAX etc) in selects ( GROUP BY , HAVING,)  
    14) Avoid using  ORDER  BY in selects
    15) Avoid Nested Selects
    16) Avoid Nested Loops of Internal Tables
    17) Try  to  use FIELD SYMBOLS.
    18) Try to avoid into Corresponding Fields of
    19) Avoid using Select  Distinct, Use DELETE ADJACENT
    <b>
    Reward Points for sure if you find it useful. </b>
    Regards
    Babu

  • Getting font problem for printing form in Production server.

    Hi experts,
                   We are getting problem while printing form in production server. As it gives no problem in Quality server while printing the same, the print is fine. We applied packages from 26 to 28 level for version 4.7. When we moved this packages to Production server we got problem of font while printing the form for some of scripts. But the surprise is that in Quality server the print is fine, no problem at all.
                  Can any one suggest me on this issue.
    Regards,
    Sagun Desai.

    Hi sagun,
    Please check the spool request generated on production server using tcode SP01.
    Goto dispaly spool request and check the spool.If the spool too displays your script correctly then there is a problem in printer connected to production server.
    The printer connected to the test server  might be rightly conffigured to print the output.Please check the settings of the printer connected to the production.
    Hope this helps.
    Regards,
    Subodh

  • Web server type of standalone oc4j needed for SSL Certificate

    Hi,
    We have a standalone oc4j 10.1.3 that hosts an application whose many of its pages use https and so we need to buy SSL certificate from any of CAs like Verisign, GeoTrust, etc.. All of these CAs are asking us about the web server type that the standalone OC4J uses. I read the following statement from this url:
    http://download.oracle.com/docs/cd/B32110_01/web.1013/b28950/intro.htm#JICON100
    "communications in a standalone environment is provided through the built-in *_OC4J Web server_*, which supports HTTP and HTTPS communications natively without the use of the Oracle HTTP Server"
    On all of the SSL certificate systems of above CAs websites, they ask us to choose the web server type from a list of server types but I don't see OC4J web server listed and I am told that it is very important to make sure the web server type is correct otherwise the SSL Certificate that we buy may not be compatible with our web server type.
    So, I like to know the exact built in web server type name that goes with Standalone OC4J or one that is closest and for which SSL Certificate is compatible.
    Shown below is a list of web server types that I am asked to choose from on Verisign website.The closest to standalone oc4j according to below list is Oracle Wallet Manager but isn't this meant for Oracle Application Server (OAS) and not the standalone OC4J? we are using the java keytool to generate the CSR that we look to sign it via the verisign but again we are not sure about the web server type in the case of standalone OC4J that is not listed below. Please advice and thanks in advance to any of your responses in helping out.
    Webstar 4.x
    ApacheSSL mod_ssl
    WebLogic 6.0
    WebLogic 8.1
    Cisco
    ACS 3.2
    Covalent
    Apache ERS 2.4
    Apache ERS 3.0
    F5
    BIG-IP
    IBM
    Websphere MQ
    HTTP Server
    Lotus
    Domino 5.0
    Domino 6.0
    Domino 7.0
    Domino 8.0
    Windows NT - IIS 4.0
    Windows 2000 - IIS 5.0
    Windows 2003 - IIS 6.0
    Windows 2008 - IIS 7.0
    Exchange 2007
    iPlanet 4.x
    iPlanet 6.x
    ScreenOS
    SSL Accelerator
    Oracle Wallet Manager_
    Secure Web Server
    SSL Offloaders
    Stronghold
    Java Web Server 6.x
    Sun ONE
    AS Server w/IIS 4
    AS Server w/IIS 5
    EA Server
    Tomcat
    Zeus

    Hi Zeus,
    Type of certificate depends the method you will use to deploy the certificate on your application server.
    Please refer the links,
    http://download.oracle.com/docs/cd/B31017_01/web.1013/b28957/configssl.htm
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/wallets.htm#ASADM400
    http://download.oracle.com/docs/cd/B14099_19/web.1012/b14013/configssl.htm
    Regards,
    mYth

Maybe you are looking for